988 resultados para Fruits average mass
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pós-graduação em Agronomia (Produção Vegetal) - FCAV
Resumo:
Background-The Second Medicine, Angioplasty, or Surgery Study (MASS II) included patients with multivessel coronary artery disease and normal systolic ventricular function. Patients underwent coronary artery bypass graft surgery (CABG, n = 203), percutaneous coronary intervention (PCI, n = 205), or medical treatment alone (MT, n = 203). This investigation compares the economic outcome at 5-year follow-up of the 3 therapeutic strategies. Methods and Results-We analyzed cumulative costs during a 5-year follow-up period. To analyze the cost-effectiveness, adjustment was made on the cumulative costs for average event-free time and angina-free proportion. Respectively, for event-free survival and event plus angina-free survival, MT presented 3.79 quality-adjusted life-years and 2.07 quality-adjusted life-years; PCI presented 3.59 and 2.77 quality-adjusted life-years; and CABG demonstrated 4.4 and 2.81 quality-adjusted life-years. The event-free costs were $9071.00 for MT; $19 967.00 for PCI; and $18 263.00 for CABG. The paired comparison of the event-free costs showed that there was a significant difference favoring MT versus PCI (P<0.01) and versus CABG (P<0.01) and CABG versus PCI (P<0.01). The event-free plus angina-free costs were $16 553.00, $25 831.00, and $24 614.00, respectively. The paired comparison of the event-free plus angina-free costs showed that there was a significant difference favoring MT versus PCI (P=0.04), and versus CABG (P<0.001); there was no difference between CABG and PCI (P>0.05). Conclusions-In the long-term economic analysis, for the prevention of a composite primary end point, MT was more cost effective than CABG, and CABG was more cost-effective than PCI.
Resumo:
The watermelon is traditionally cultivated horizontally on the ground. The cultivars of small fruits (1 to 3 kg), which reach better market prices, are also being grown in a greenhouse, where the plants are trained upward on vertical supports, with branches pruning and fruits thinning. These practices make possible an increase of the plant density, fruit quality and yield compared to the traditional growth system. The aim of this experiment was to evaluate the influence of three training heights (1.7, 2.2 and 2.7 m) and two planting densities (3.17 and 4.76 plants m-2) over the productive and qualitative characteristics of mini watermelon "Smile" cultivated in greenhouse. The pruning was done at 43, 55 and 66 days after transplanting (DAT), when the plant height reached 1.7, 2.2 and 2.7 m, respectively. The dry mass of branches, petioles, leaves and total were affected by the training height, where the highest values were obtained by the plants pruned at 2.2 and 2.7 m. Leaf area, specific leaf area and leaf area index were not affected by the height of the plants. The training height of 2.7 m raised the total yield, however, marketable yield, average fruit mass and all the quality characteristics did not differ significantly from those obtained by the training height of 2.2 m. Regarding to plant density, the best option was 4.76 plants m-2, due to the increasing of marketable yield in 37.4% without reducing the average weight of fruits.
Resumo:
Ceratitis capitata is one of the most important pests of fruits for exportation, and Sterile Insect Technique (SIT) has been the most efficient and environmental friendly technique used to control fruit fly populations around the world. A key goal in achieving a successful SIT program is a mass rearing system producing high quality insects at low cost. Providing adults with an artificial diet containing hydrolysed protein has been the major obstacle for bio-production facilities in Brazil, because it is expensive and has to be imported. Two other commercial products, autolysed yeast (AY) and yeast extract (YE), of domestic origin and low cost, were tested as substitutes of the imported hydrolyzed protein. To compare their efficiency we observed the female fecundity, adult survival and egg viability of flies raised on diets containing one of each of the different protein products. Flies reared on the domestic yeast products had equivalent or superior performance to the flies reared on imported protein. Both AY and YE can be a possible substitute for imported hydrolyzed protein for C. capitata mass-rearing, as they are cheaper and are readily available in the national market.
Resumo:
With the goal of studying ML along the RGB, mid-IR observations of a carefully selected sample of 17 Galactic globular clusters (GGCs) with different metallicity and horizontal branch (HB) morphology have been secured with IRAC on board Spitzer: a global sample counting about 8000 giant has been obtained. Suitable complementary photometry in the optical and near-IR has been also secured in order to properly characterize the stellar counterparts to the Spitzer sources and their photospheric parameters. Stars with color (i.e. dust) excess have been identified, their likely circumstellar emission quantified and modelled, and empirical estimates of mass loss rates and timescales obtained. We find that mass loss rates increases with increasing stellar luminosity and decreasing metallicity. For a given luminosity, we find that ML rates are systematically higher than the prediction by extrapolating the Reimers law. CMDs constructed from ground based near-IR and IRAC bands show that at a given luminosity some stars have dusty envelopes and others do not. From this, we deduce that the mass loss is episodic and is ``on'' for some fraction of the time. The total mass lost on the RGB can be easily computed by multiplying ML rates by the ML timescales and integrating over the evolutionary timescale. The average total mass lost moderately increases with increasing metallicity, and for a given metallicity is systematically higher in clusters with extended blue HB.
Resumo:
During this work has been developed an innovative methodology for continuous and in situ gas monitoring (24/24 h) of fumarolic and soil diffusive emissions applied to the geothermal and volcanic area of Pisciarelli near Agnano inside the Campi Flegrei caldera (CFc). In literature there are only scattered and in discrete data of the geochemical gas composition of fumarole at Campi Flegrei; it is only since the early ’80 that exist a systematic record of fumaroles with discrete sampling at Solfatara (Bocca Grande and Bocca Nuova fumaroles) and since 1999, even at the degassing areas of Pisciarelli. This type of sampling has resulted in a time series of geochemical analysis with discontinuous periods of time set (in average 2-3 measurements per month) completely inadequate for the purposes of Civil Defence in such high volcanic risk and densely populated areas. For this purpose, and to remedy this lack of data, during this study was introduced a new methodology of continuous and in situ sampling able to continuously detect data related and from its soil diffusive degassing. Due to its high sampling density (about one measurement per minute therefore producing 1440 data daily) and numerous species detected (CO2, Ar, 36Ar, CH4, He, H2S, N2, O2) allowing a good statistic record and the reconstruction of the gas composition evolution of the investigated area. This methodology is based on continuous sampling of fumaroles gases and soil degassing using an extraction line, which after undergoing a series of condensation processes of the water vapour content - better described hereinafter - is analyzed through using a quadrupole mass spectrometer
Resumo:
In this Thesis, we study the accretion of mass and angular momentum onto the disc of spiral galaxies from a global and a local perspective and comparing theory predictions with several observational data. First, we propose a method to measure the specific mass and radial growth rates of stellar discs, based on their star formation rate density profiles and we apply it to a sample of nearby spiral galaxies. We find a positive radial growth rate for almost all galaxies in our sample. Our galaxies grow in size, on average, at one third of the rate at which they grow in mass. Our results are in agreement with theoretical expectations if known scaling relations of disc galaxies are not evolving with time. We also propose a novel method to reconstruct accretion profiles and the local angular momentum of the accreting material from the observed structural and chemical properties of spiral galaxies. Applied to the Milky Way and to one external galaxy, our analysis indicates that accretion occurs at relatively large radii and has a local deficit of angular momentum with respect to the disc. Finally, we show how structure and kinematics of hot gaseous coronae, which are believed to be the source of mass and angular momentum of massive spiral galaxies, can be reconstructed from their angular momentum and entropy distributions. We find that isothermal models with cosmologically motivated angular momentum distributions are compatible with several independent observational constraints. We also consider more complex baroclinic equilibria: we describe a new parametrization for these states, a new self-similar family of solution and a method for reconstructing structure and kinematics from the joint angular momentum/entropy distribution.
Resumo:
La massa del quark top è qui misurata per mezzo dei dati raccolti dall’esperimento CMS in collisioni protone-protone ad LHC, con energia nel centro di massa pari ad 8 TeV. Il campione di dati raccolto corrisponde ad una luminosità integrata pari a 18.2 /fb. La misura è effettuata su eventi con un numero di jet almeno pari a 6, di cui almeno due b-taggati (ovvero identificati come prodotto dell’adronizzazione di due quark bottom). Il valore di massa trovato è di (173.95 +- 0.43 (stat)) GeV/c2, in accordo con la media mondiale. The top quark mass is here measured by using the data that have been collected with the CMS experiment in proton-proton collisions at the LHC, at a center-of-mass energy of 8 TeV. The dataset which was used, corresponds to an integrated luminosiy of 18.2 /fb. The mass measurement is carried out by using events characterized by six or more jets, two of which identified as being originated by the hadronization of bottom quarks. The result of the measurement of the top quark mass performed here is: (173.95 +- 0.43 (stat)) GeV/c2, in accordance with the recently published world average.
Resumo:
BACKGROUND: Decreased bone mineral density has been reported in children with inflammatory bowel disease (IBD). We used peripheral quantitative computed tomography (pQCT) to assess bone mineralization, geometry, and muscle cross-sectional area (CSA) in pediatric IBD. METHODS: In a cross-sectional study, pQCT of the forearm was applied in 143 IBD patients (mean age 13.9 +/- 3.5 years); 29% were newly diagnosed, 98 had Crohn's disease, and 45 had ulcerative colitis. Auxological data, cumulative glucocorticoid dose, disease activity indices, laboratory markers for inflammation, and bone metabolism were related to the results of pQCT. RESULTS: Patients were compromised in height (-0.82 +/- 1.1 SD), weight (-0.77 +/- 1.0 SD), muscle mass (-1.12 +/- 1.0 SD), and total bone cross-sectional area (-0.79 +/- 1.0 SD) compared to age- and sex-matched healthy controls (z-scores). In newly diagnosed patients, the ratio of bone mineral mass per muscle CSA was higher than in those with longer disease duration (1.00 versus 0.30, P = 0.007). Serum albumin level and disease activity correlated with muscle mass, accounting for 41.0% of variability in muscle mass (P < 0.01). The trabecular bone mineral density z-score was on average at the lower normal level (-0.40 +/- 1.3 SD, P < 0.05). CONCLUSIONS: Reduced bone geometry was explained only in part by reduced height. Bone disease in children with IBD seems to be secondary to muscle wasting, which is already present at diagnosis. With longer disease duration, bone adapts to the lower muscle CSA. Serum albumin concentration is a good marker for muscle wasting and abnormal bone development.
Resumo:
The dissipation of high heat flux from integrated circuit chips and the maintenance of acceptable junction temperatures in high powered electronics require advanced cooling technologies. One such technology is two-phase cooling in microchannels under confined flow boiling conditions. In macroscale flow boiling bubbles will nucleate on the channel walls, grow, and depart from the surface. In microscale flow boiling bubbles can fill the channel diameter before the liquid drag force has a chance to sweep them off the channel wall. As a confined bubble elongates in a microchannel, it traps thin liquid films between the heated wall and the vapor core that are subject to large temperature gradients. The thin films evaporate rapidly, sometimes faster than the incoming mass flux can replenish bulk fluid in the microchannel. When the local vapor pressure spike exceeds the inlet pressure, it forces the upstream interface to travel back into the inlet plenum and create flow boiling instabilities. Flow boiling instabilities reduce the temperature at which critical heat flux occurs and create channel dryout. Dryout causes high surface temperatures that can destroy the electronic circuits that use two-phase micro heat exchangers for cooling. Flow boiling instability is characterized by periodic oscillation of flow regimes which induce oscillations in fluid temperature, wall temperatures, pressure drop, and mass flux. When nanofluids are used in flow boiling, the nanoparticles become deposited on the heated surface and change its thermal conductivity, roughness, capillarity, wettability, and nucleation site density. It also affects heat transfer by changing bubble departure diameter, bubble departure frequency, and the evaporation of the micro and macrolayer beneath the growing bubbles. Flow boiling was investigated in this study using degassed, deionized water, and 0.001 vol% aluminum oxide nanofluids in a single rectangular brass microchannel with a hydraulic diameter of 229 µm for one inlet fluid temperature of 63°C and two constant flow rates of 0.41 ml/min and 0.82 ml/min. The power input was adjusted for two average surface temperatures of 103°C and 119°C at each flow rate. High speed images were taken periodically for water and nanofluid flow boiling after durations of 25, 75, and 125 minutes from the start of flow. The change in regime timing revealed the effect of nanoparticle suspension and deposition on the Onset of Nucelate Boiling (ONB) and the Onset of Bubble Elongation (OBE). Cycle duration and bubble frequencies are reported for different nanofluid flow boiling durations. The addition of nanoparticles was found to stabilize bubble nucleation and growth and limit the recession rate of the upstream and downstream interfaces, mitigating the spreading of dry spots and elongating the thin film regions to increase thin film evaporation.
Resumo:
Relationships between mineralization, collagen orientation and indentation modulus were investigated in bone structural units from the mid-shaft of human femora using a site-matched design. Mineral mass fraction, collagen fibril angle and indentation moduli were measured in registered anatomical sites using backscattered electron imaging, polarized light microscopy and nano-indentation, respectively. Theoretical indentation moduli were calculated with a homogenization model from the quantified mineral densities and mean collagen fibril orientations. The average indentation moduli predicted based on local mineralization and collagen fibers arrangement were not significantly different from the average measured experimentally with nanoindentation (p=0.9). Surprisingly, no substantial correlation of the measured indentation moduli with tissue mineralization and/or collagen fiber arrangement was found. Nano-porosity, micro-damage, collagen cross-links, non-collagenous proteins or other parameters affect the indentation measurements. Additional testing/simulation methods need to be considered to properly understand the variability of indentation moduli, beyond the mineralization and collagen arrangement in bone structural units.
Resumo:
The aim of this study was (1) to examine whether childhood BMI is a significant predictor of restrained eating in preadolescents, (2) to investigate gender differences in restrained and emotional eating, and (3) to determine whether emotional problems, and body esteem were related to eating problems of preadolescents. In this longitudinal study with two measurement points, data from 428 children (50% female) were used. At time 1 (t1) children were on average 5.9 years old. BMI was assessed using objective measures. At time 2 (t2) participants were 12 years old. The adolescents and their parents completed questionnaires assessing restrained and emotional eating, body esteem, emotional problems, and BMI. Multiple regression analysis showed that restrained eating was significantly predicted by t1 BMI, by change in BMI between t1 and t2, and t2 body esteem. Emotional eating was, as expected, not predicted by t1 BMI, but associated with t2 body esteem and t2 emotional problems. Gender was not a significant predictor. The stability of BMI between childhood and preadolescence and its ability to predict restrained eating suggests that it is important to start prevention of overweight, body dissatisfaction and disordered eating at an early age
Resumo:
Many persons in the U.S. gain weight during young adulthood, and the prevalence of obesity has been increasing among young adults. Although obesity and physical inactivity are generally recognized as risk factors for coronary heart disease (CHD), the magnitude of their effect on risk may have been seriously underestimated due to failure to adequately handle the problem of cigarette smoking. Since cigarette smoking causes weight loss, physically inactive cigarette smokers may remain relatively lean because they smoke cigarettes. We hypothesize cigarette smoking modifies the association between weight gain during young adulthood and risk of coronary heart disease during middle age, and that the true effect of weight gain during young adulthood on risk of CHD can be assessed only in persons who have not smoked cigarettes. Specifically, we hypothesize that weight gain during young adulthood is positively associated with risk of CHD during middle-age in nonsmokers but that the association is much smaller or absent entirely among cigarette smokers. The purpose of this study was to test this hypothesis. The population for analysis was comprised of 1,934 middle-aged, employed men whose average age at the baseline examination was 48.7 years. Information collected at the baseline examinations in 1958 and 1959 included recalled weight at age 20, present weight, height, smoking status, and other CHD risk factors. To decrease the effect of intraindividual variation, the mean values of the 1958 and 1959 baseline examinations were used in analyses. Change in body mass index ($\Delta$BMI) during young adulthood was the primary exposure variable and was measured as BMI at baseline (kg/m$\sp2)$ minus BMI at age 20 (kg/m$\sp2).$ Proportional hazards regression analysis was used to generate relative risks of CHD mortality by category of $\Delta$BMI and cigarette smoking status after adjustment for age, family history of CVD, major organ system disease, BMI at age 20, and number of cigarettes smoked per day. Adjustment was not performed for systolic blood pressure or total serum cholesterol as these were regarded as intervening variables. Vital status was known for all men on the 25th anniversary of their baseline examinations. 705 deaths (including 319 CHD deaths) occurred over 40,136 person-years of experience. $\Delta$BMI was positively associated with risk of CHD mortality in never-smokers, but not in ever-smokers (p for interaction = 0.067). For never-smokers with $\Delta$BMI of stable, low gain, moderate gain, and high gain, adjusted relative risks were 1.00, 1.62, 1.61, and 2.78, respectively (p for trend = 0.010). For ever-smokers, with $\Delta$BMI of stable, low gain, moderate gain, and high gain, adjusted relative risks were 1.00, 0.74, 1.07, and 1.06, respectively (p for trend = 0.422). These results support the research hypothesis that cigarette smoking modifies the association between weight gain and CHD mortality. Current estimates of the magnitude of effect of obesity and physical inactivity on risk of coronary mortality may have been seriously underestimated due to inadequate handling of cigarette smoking. ^