889 resultados para Frequency-Domain Analysis
Resumo:
Trabalho Final de Mestrado elaborado no Laboratório de Engenharia Civil (LNEC) para obtenção do grau de Mestre em Engenharia Civil pelo Instituto Superior de Engenharia de Lisboa no âmbito do protocolo de cooperação entre o ISEL e o LNEC
Resumo:
Trabalho Final de Mestrado elaborado no Laboratório Nacional de Engenharia Civil (LNEC) para a obtenção do grau de Mestre em Engenharia Civil pelo Instituto Superior de Engenharia de Lisboa no âmbito do protocolo de cooperação ente o ISEL e o LNEC
Resumo:
Dissertação de natureza Científica para obtenção do grau de Mestre em Engenharia Civil
Resumo:
Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica
Resumo:
This thesis investigated the modulation of dynamic contractile function and energetics of work by posttetanic potentiation (PTP). Mechanical experiments were conducted in vitro using software-controlled protocols to stimulate/determine contractile function during ramp shortening, and muscles were frozen during parallel incubations for biochemical analysis. The central feature of this research was the comparison of fast hindlimb muscles from wildtype and skeletal myosin light chain kinase knockout (skMLCK-/-) mice that does not express the primary mechanism for PTP: myosin regulatory light chain (RLC) phosphorylation. In contrast to smooth/cardiac muscles where RLC phosphorylation is indispensable, its precise physiological role in skeletal muscle is unclear. It was initially determined that tetanic potentiation was shortening speed dependent, and this sensitivity of the PTP mechanism to muscle shortening extended the stimulation frequency domain over which PTP was manifest. Thus, the physiological utility of RLC phosphorylation to augment contractile function in vivo may be more extensive than previously considered. Subsequent experiments studied the contraction-type dependence for PTP and demonstrated that the enhancement of contractile function was dependent on force level. Surprisingly, in the absence of RLC phosphorylation, skMLCK-/- muscles exhibited significant concentric PTP; consequently, up to ~50% of the dynamic PTP response in wildtype muscle may be attributed to an alternate mechanism. When the interaction of PTP and the catchlike property (CLP) was examined, we determined that unlike the acute augmentation of peak force by the CLP, RLC phosphorylation produced a longer-lasting enhancement of force and work in the potentiated state. Nevertheless, despite the apparent interference between these mechanisms, both offer physiological utility and may be complementary in achieving optimal contractile function in vivo. Finally, when the energetic implications of PTP were explored, we determined that during a brief period of repetitive concentric activation, total work performed was ~60% greater in wildtype vs. skMLCK-/- muscles but there was no genotype difference in High-Energy Phosphate Consumption or Economy (i.e. HEPC: work). In summary, this thesis provides novel insight into the modulatory effects of PTP and RLC phosphorylation, and through the observation of alternative mechanisms for PTP we further develop our understanding of the history-dependence of fast skeletal muscle function.
Resumo:
Le présent mémoire comprend un survol des principales méthodes de rendu en demi-tons, de l’analog screening à la recherche binaire directe en passant par l’ordered dither, avec une attention particulière pour la diffusion d’erreur. Ces méthodes seront comparées dans la perspective moderne de la sensibilité à la structure. Une nouvelle méthode de rendu en demi-tons par diffusion d’erreur est présentée et soumise à diverses évaluations. La méthode proposée se veut originale, simple, autant à même de préserver le caractère structurel des images que la méthode à l’état de l’art, et plus rapide que cette dernière par deux à trois ordres de magnitude. D’abord, l’image est décomposée en fréquences locales caractéristiques. Puis, le comportement de base de la méthode proposée est donné. Ensuite, un ensemble minutieusement choisi de paramètres permet de modifier ce comportement de façon à épouser les différents caractères fréquentiels locaux. Finalement, une calibration détermine les bons paramètres à associer à chaque fréquence possible. Une fois l’algorithme assemblé, toute image peut être traitée très rapidement : chaque pixel est attaché à une fréquence propre, cette fréquence sert d’indice pour la table de calibration, les paramètres de diffusion appropriés sont récupérés, et la couleur de sortie déterminée pour le pixel contribue en espérance à souligner la structure dont il fait partie.
Resumo:
The attached file is created with Scientific Workplace Latex
Resumo:
La phosphorylation est une modification post-traductionnelle omniprésente des protéines Cette modification est ajoutée et enlevée par l’activité enzymatique respective des protéines kinases et phosphatases. Les kinases Erk1/2 sont au cœur d’une voie de signalisation importante qui régule l’activité de protéines impliquées dans la traduction, le cycle cellulaire, le réarrangement du cytosquelette et la transcription. Ces kinases sont aussi impliquées dans le développement de l’organisme, le métabolisme du glucose, la réponse immunitaire et la mémoire. Différentes pathologies humaines comme le diabète, les maladies cardiovasculaires et principalement le cancer, sont associées à une perturbation de la phosphorylation sur les différents acteurs de cette voie. Considérant l’importance biologique et clinique de ces deux kinases, connaître l’étendue de leur activité enzymatique pourrait mener au développement de nouvelles thérapies pharmacologiques. Dans ce contexte, l’objectif principal de cette thèse était de mesurer l’influence de cette voie sur le phosphoprotéome et de découvrir de nouveaux substrats des kinases Erk1/2. Une étude phosphoprotéomique de cinétique d’inhibition pharmacologique de la voie de signalisation Erk1/2 a alors été entreprise. Le succès de cette étude était basé sur trois technologies clés, soit l’enrichissement des phosphopeptides avec le dioxyde de titane, la spectrométrie de masse haut débit et haute résolution, et le développement d’une plateforme bio-informatique nommée ProteoConnections. Cette plateforme permet d’organiser les données de protéomique, évaluer leur qualité, indiquer les changements d’abondance et accélérer l’interprétation des données. Une fonctionnalité distinctive de ProteoConnections est l’annotation des sites phosphorylés identifiés (kinases, domaines, structures, conservation, interactions protéiques phospho-dépendantes). Ces informations ont été essentielles à l’analyse des 9615 sites phosphorylés sur les 2108 protéines identifiées dans cette étude, soit le plus large ensemble rapporté chez le rat jusqu’à ce jour. L’analyse des domaines protéiques a révélé que les domaines impliqués dans les interactions avec les protéines, les acides nucléiques et les autres molécules sont les plus fréquemment phosphorylés et que les sites sont stratégiquement localisés pour affecter les interactions. Un algorithme a été implémenté pour trouver les substrats potentiels des kinases Erk1/2 à partir des sites identifiés selon leur motif de phosphorylation, leur cinétique de stimulation au sérum et l’inhibition pharmacologique de Mek1/2. Une liste de 157 substrats potentiels des kinases Erk1/2 a ainsi été obtenue. Parmi les substrats identifiés, douze ont déjà été rapportés et plusieurs autres ont des fonctions associées aux substrats déjà connus. Six substrats (Ddx47, Hmg20a, Junb, Map2k2, Numa1, Rras2) ont été confirmés par un essai kinase in vitro avec Erk1. Nos expériences d’immunofluorescence ont démontré que la phosphorylation de Hmg20a sur la sérine 105 par Erk1/2 affecte la localisation nucléocytoplasmique de cette protéine. Finalement, les phosphopeptides isomériques positionnels, soit des peptides avec la même séquence d’acides aminés mais phosphorylés à différentes positions, ont été étudiés avec deux nouveaux algorithmes. Cette étude a permis de déterminer leur fréquence dans un extrait enrichi en phosphopeptides et d’évaluer leur séparation par chromatographie liquide en phase inverse. Une stratégie analytique employant un des algorithmes a été développée pour réaliser une analyse de spectrométrie de masse ciblée afin de découvrir les isomères ayant été manqués par la méthode d’analyse conventionnelle.
Resumo:
In recent years, there is a visible trend for products/services which demand seamless integration of cellular networks, WLANs and WPANs. This is a strong indication for the inclusion of high speed short range wireless technology in future applications. In this context UWB radio has a significant role to play as an extension/complement to existing cellular/access technology. In the present work, we have investigated two major types of wide band planar antennas: Monopole and Slot. Four novel compact broadband antennas, suitable for poratble applications, are designed and characterized, namely 1. Elliptical monopole 2. Inverted cone monopole 3. Koch fractal slot 4. Wide band slot The performance of these designs have been studied using standard simulation tools used in industry/academia and they have been experimentally verified. Antenna design guidelines are also deduced by accounting the resonances in each structure. In addition to having compact sized, high efficiency and broad bandwidth antennas, one of the major criterion in the design of impulse-UWB systems have been the transmission of narrow band pulses with minimum distortion. The key challenge is not only to design a broad band antenna with constant and stable gain but to maintain a flat group delay or linear phase response in the frequency domain or excellent transient response in time domain. One of the major contributions of the thesis lies in the analysis of the frequency and time-domain response of the designed UWB antennas to confirm their suitability for portable pulsed-UWB systems. Techniques to avoid narrowband interference by engraving narrow slot resonators on the antenna is also proposed and their effect on a nano-second pulse have been investigated.
Resumo:
The thesis mainly focuses on material characterization in different environments: freely available samples taken in planar fonn, biological samples available in small quantities and buried objects.Free space method, finds many applications in the fields of industry, medicine and communication. As it is a non-contact method, it can be employed for monitoring the electrical properties of materials moving through a conveyor belt in real time. Also, measurement on such systems at high temperature is possible. NID theory can be applied to the characterization of thin films. Dielectric properties of thin films deposited on any dielectric substrate can be determined. ln chemical industry, the stages of a chemical reaction can be monitored online. Online monitoring will be more efficient as it saves time and avoids risk of sample collection.Dielectric contrast is one of the main factors, which decides the detectability of a system. lt could be noted that the two dielectric objects of same dielectric constant 3.2 (s, of plastic mine) placed in a medium of dielectric constant 2.56 (er of sand) could even be detected employing the time domain analysis of the reflected signal. This type of detection finds strategic importance as it provides solution to the problem of clearance of non-metallic mines. The demining of these mines using the conventional techniques had been proved futile. The studies on the detection of voids and leakage in pipes find many applications.The determined electrical properties of tissues can be used for numerical modeling of cells, microwave imaging, SAR test etc. All these techniques need the accurate determination of dielectric constant. ln the modem world, the use of cellular and other wireless communication systems is booming up. At the same time people are concemed about the hazardous effects of microwaves on living cells. The effect is usually studied on human phantom models. The construction of the models requires the knowledge of the dielectric parameters of the various body tissues. lt is in this context that the present study gains significance. The case study on biological samples shows that the properties of normal and infected body tissues are different. Even though the change in the dielectric properties of infected samples from that of normal one may not be a clear evidence of an ailment, it is an indication of some disorder.ln medical field, the free space method may be adapted for imaging the biological samples. This method can also be used in wireless technology. Evaluation of electrical properties and attenuation of obstacles in the path of RF waves can be done using free waves. An intelligent system for controlling the power output or frequency depending on the feed back values of the attenuation may be developed.The simulation employed in GPR can be extended for the exploration of the effects due to the factors such as the different proportion of water content in the soil, the level and roughness of the soil etc on the reflected signal. This may find applications in geological explorations. ln the detection of mines, a state-of-the art technique for scanning and imaging an active mine field can be developed using GPR. The probing antenna can be attached to a robotic arm capable of three degrees of rotation and the whole detecting system can be housed in a military vehicle. In industry, a system based on the GPR principle can be developed for monitoring liquid or gas through a pipe, as pipe with and without the sample gives different reflection responses. lt may also be implemented for the online monitoring of different stages of extraction and purification of crude petroleum in a plant.Since biological samples show fluctuation in the dielectric nature with time and other physiological conditions, more investigation in this direction should be done. The infected cells at various stages of advancement and the normal cells should be analysed. The results from these comparative studies can be utilized for the detection of the onset of such diseases. Studying the properties of infected tissues at different stages, the threshold of detectability of infected cells can be determined.
Resumo:
In recent years, there is a visible trend for products/services which demand seamless integration of cellular networks, WLANs and WPANs. This is a strong indication for the inclusion of high speed short range wireless technology in future applications. In this context UWB radio has a significant role to play as an extension/complement to existing cellular/access technology. In the present work, three major types of ultra wide band planar antennas are investigated: Monopole and Slot. Three novel compact UWB antennas, suitable for poratble applications, are designed and characterized, namely 1) Ground modified monopole 2) Serrated monopole 3) Triangular slot The performance of these designs have been studied using standard simulation tools used in industry/academia and they have been experimentally verified. Antenna design guidelines are also deduced by accounting the resonances in each structure. In addition to having compact sized, high efficiency and broad bandwidth antennas, one of the major criterion in the design of impulse-UWB systems have been the transmission of narrow band pulses with minimum distortion. The key challenge is not only to design a broad band antenna with constant and stable gain but to maintain a flat group delay or linear phase response in the frequency domain or excellent transient response in time domain. One of the major contributions of the thesis lies in the analysis of the frequency and timedomain response of the designed UWB antennas to confirm their suitability for portable pulsed-UWB systems. Techniques to avoid narrowband interference by engraving narrow slot resonators on the antenna is also proposed and their effect on a nano-second pulse have been investigated
Resumo:
With the recent progress and rapid increase in the field of communication, the designs of antennas for small mobile terminals with enhanced radiation characteristics are acquiring great importance. Compactness, efficiency, high data rate capacity etc. are the major criteria for the new generation antennas. The challenging task of the microwave scientists and engineers is to design a compact printed radiating structure having broadband behavior along with good efficiency and enhanced gain. Printed antenna technology has received popularity among antenna scientists after the introduction of planar transmission lines in mid-seventies. When we view the antenna through a transmission line concept, the mechanism behind any electromagnetic radiator is quite simple and interesting. Any electromagnetic system with a discontinuity is radiating electromagnetic energy. The size, shape and orientation of the discontinuities control the radiation characteristics of the system such as radiation pattern, gain, polarization etc. It can be either resonant or non-resonant. This thesis deals with antennas that are developed from a class of transmission lines known as coplanar strip-CPS, a planar analogy of parallel pair transmission line. The specialty of CPS is its symmetric structure compared to other transmission lines, which makes the antenna structures developed from CPS quite simple for design and fabrication. The structural modifications on either metallic strip of CPS results in different antennas. The first part of the thesis discusses a single band and dual band design derived from open ended slot lines which are very much suitable for 2.4 and 5.2 GHz WLAN applications. The second section of the study is vectored into the development of enhanced gain dipoles. A single band dipole and a wide band enhanced gain dipole suitable for 5.2/5.8 GHZ band and imaging applications are developed and discussed. Last part of the thesis discusses the development of directional UWBs. Three different types of ultra-compact UWBs are developed and almost all the frequency domain and time domain analysis of the structures are discussed.
Resumo:
Time/frequency and temporal analyses have been widely used in biomedical signal processing. These methods represent important characteristics of a signal in both time and frequency domain. In this way, essential features of the signal can be viewed and analysed in order to understand or model the physiological system. Historically, Fourier spectral analyses have provided a general method for examining the global energy/frequency distributions. However, an assumption inherent to these methods is the stationarity of the signal. As a result, Fourier methods are not generally an appropriate approach in the investigation of signals with transient components. This work presents the application of a new signal processing technique, empirical mode decomposition and the Hilbert spectrum, in the analysis of electromyographic signals. The results show that this method may provide not only an increase in the spectral resolution but also an insight into the underlying process of the muscle contraction.
Resumo:
The detection of long-range dependence in time series analysis is an important task to which this paper contributes by showing that whilst the theoretical definition of a long-memory (or long-range dependent) process is based on the autocorrelation function, it is not possible for long memory to be identified using the sum of the sample autocorrelations, as usually defined. The reason for this is that the sample sum is a predetermined constant for any stationary time series; a result that is independent of the sample size. Diagnostic or estimation procedures, such as those in the frequency domain, that embed this sum are equally open to this criticism. We develop this result in the context of long memory, extending it to the implications for the spectral density function and the variance of partial sums of a stationary stochastic process. The results are further extended to higher order sample autocorrelations and the bispectral density. The corresponding result is that the sum of the third order sample (auto) bicorrelations at lags h,k≥1, is also a predetermined constant, different from that in the second order case, for any stationary time series of arbitrary length.
Resumo:
A disfunção autonômica está associada com aumento da mortalidade em pacientes diabéticos, especialmente naqueles com doença cardiovascular. Neuropatia periférica, mau controle glicêmico, dislipidemia e hipertensão são alguns dos fatores de risco para o desenvolvimento de doença vascular periférica (DVP) nestes pacientes. O objetivo deste estudo foi avaliar os fatores de risco associados com a presença de DVP em pacientes com DM tipo 2. Um estudo transversal foi realizado em 84 pacientes com DM tipo 2 ( 39 homens, idade média de 64,9 ± 7,5 anos). Os pacientes foram submetidos a uma avaliação clínica e laboratorial. A presença de DVP foi definida, utilizando-se um um aparelho manual de ultrasom com doppler (índice perna-braço < 0,9). A atividade autonômica foi avaliada através da análise da variabilidade da freqüência cardíaca (HRV) por métodos no domínio do tempo e da freqüência (análise espectral), e pelo mapa de retorno tridimensional durante o período do dia e da noite. Para a análise da HRV, um eletrocardiograma de 24 horas foi gravado e as fitas analisadas em um analisador de Holter Mars 8000 (Marquete). A potência espectral foi quantificada pela área em duas bandas de freqüência: 0,04-0,15 Hz – baixa freqüência (BF), 0,015-0,5 Hz – alta freqüência (AF). A razão BF/AF foi calculada em cada paciente. O mapa de retorno tridimensional foi construído através de um modelo matemático onde foram analisados os intervalos RR versus a diferença entre os intervalos RR adjacentes versus o número de contagens verificadas, e quantificado por três índices refletindo a modulação simpática (P1) e vagal (P2 e P3). DVP estava presente em 30 (36%) pacientes. Na análise univariada, pacientes com DVP apresentaram índices que refletem a modulação autonômica (análise espectral) diminuídos quando comparados aos pacientes sem DVP, respectivamente: BF = 0,19 ± 0,07 m/s2 vs. 0,29 ± 0,11 m/s2 P = 0,0001; BF/AF = 1,98 ± 0,9 m/s2 vs. 3,35 ± 1,83 m/s2 p = 0,001. Além disso, o índice que reflete a atividade simpática no mapa de retorno tridimensional (P1), foi mais baixo em pacientes com DVP (61,7 ± 9,4 vs. 66,8 ± 9,7 unidades arbitrárias, P = 0,04) durante a noite, refletindo maior ativação simpática neste período. Estes pacientes também apresentavam uma maior duração do diabetes (20 ± 8,1 vs. 15,3 ± 6,7 anos, P = 0,006), níveis de pressão arterial sistólica (154 ± 20 vs. 145 ± 20 mmHg, P = 0,04), razão cintura-quadril ( 0,98 ± 0,09 vs.0,92 ± 0,08, P = 0,01), e níveis de HbA1c mais elevados (7,7 ± 1,6 vs. 6,9 ± 1,7 %, P = 0,04), bem como valores de triglicerídeos ( 259 ± 94 vs. 230 ± 196 mg/dl, P= 0,03) e de excreção urinária de albumina ( 685,5 ± 1359,9 vs. 188,2 ± 591,1 μ/min, P = 0,02) superiores aos dos pacientes sem DVP.. Nos pacientes com DVP observou-se uma presença aumentada de nefropatia diabética (73,3% vs. 29,6% P = 0,0001), de retinopatia (73,3% vs. 44,4% P = 0,02) e neuropatia periférica (705 vs. 35,1% P = 0,006). Os grupos não diferiram quanto à idade, índice de massa corporal, tabagismo e presença de doença arterial coronariana. Na análise logística multivariada, a DVP permaneceu associada com a disfunção autonômica, mesmo após ter sido controlada pela pressão arterial sistólica, duração do DM, HbA1c, triglicerídeos e excreção urinária de albumina. Concluindo, pacientes com DVP e DM tipo 2 apresentam índices que refletem a modulação autonômica diminuídos, o que pode representar um fator de risco adicional para o aumento da mortalidade nestes pacientes.