Task-switching deficits and repetitive behaviour in genetic neurodevelopmental disorders: Data from children with Prader-Willi syndrome chromosome 15 q11-q13 deletion and boys with Fragile X syndrome

Prader-Willi syndrome (PWS) and Fragile X syndrome (FraX) are associated with distinctive cognitive and behavioural profiles. We examined whether repetitive behaviours in the two syndromes were associated with deficits in specific executive functions. PWS, FraX, and typically developing (TD) children were assessed for executive functioning using the Test of Everyday Attention for Children and an adapted Simon spatial interference task. Relative to the TD children, children with PWS and FraX showed greater costs of attention switching on the Simon task, but after controlling for intellectual ability, these switching deficits were only significant in the PWS group. Children with PWS and FraX also showed significantly increased preference for routine and differing profiles of other specific types of repetitive behaviours. A measure of switch cost from the Simon task was positively correlated to scores on preference for routine questionnaire items and was strongly associated with scores on other items relating to a preference for predictability. It is proposed that a deficit in attention switching is a component of the endophenotypes of both PWS and FraX and is associated with specific behaviours. This proposal is discussed in the context of neurocognitive pathways between genes and behaviour.

Three dimensional morphology and compressive behaviour of sintered biodegradable composite scaffolds

Porous poly-L-lactide acid (PLA) scaffolds are prepared using polymer sintering and porogen leaching method. Different weight fractions of the Hydroxyapatite (HA) are added to the PLA to control the acidity and degradation rate. The three dimensional morphology and surface porosity are tested using micro CT, optical microscopy and scanning electron microscopy (SEM). Results indicate that the surface porosity does not change by addition of HA. The micro Ct examinations show slight decrease in the pore size and increase in wall thickness accompanied with reduced anisotropy for the scaffolds containing HA. SEM micrographs show detectable interconnected pores for the scaffold with pure PLA. Addition of the HA results in agglomeration of the HA which blocks some of the pores. Compression tests of the scaffold identify three stages in the stress-strain curve. The addition of HA adversely affects the modulus of the scaffold at the first stage, but this was reversed for the second and third stages of the compression. The results of these tests are compared with the cellular material model. The manufactured scaffold have acceptable properties for a scaffold, however improvement to the mixing of the phases of PLA and HA is required to achieve better integrity of the composite scaffolds.

Morphology and compression behaviour of biodegradable scaffolds produced by the sintering process

Porous poly(L-lactic acid) (PLA) scaffolds of 85 per cent and 90 per cent porosity are prepared using polymer sintering and porogen leaching method. Different weight fractions of 10 per cent, 30 per cent, and 50 per cent of hydroxyapatite (HA) are added to the PLA to control the acidity and degradation rate. The three-dimensional (3D) morphology and surface porosity are tested using micro-computer tomography (micro-CT), optical microscopy, and scanning electron microscopy (SEM). Results indicate that the surface porosity does not change on the addition of HA. The micro-CT examinations show a slight decrease in the pore size and increase in the wall thickness accompanied by reduced anisotropy for the scaffolds containing HA. Scanning electron micrographs show detectable interconnected pores for the scaffold with pure PLA. Addition of the HA results in agglomeration of the HA particles and reduced leaching of the porogen. Compression tests of the scaffold identify three stages in the stress-strain curve. The addition of HA results in a reduction in the modulus of the scaffold at the first stage of elastic bending of the wall, but this is reversed for the second and third stages of collapse of the wall and densification in the compression tests. In the scaffolds with 85 per cent porosity, the addition of a high percentage of HA could result in 70 per cent decrease in stiffness in the first stage, 200 per cent increase in stiffness in the second stage, and 20 per cent increase in stiffness in the third stage. The results of these tests are compared with the Gibson cellular material model that is proposed for prediction of the behaviour of cellular material under compression. The pH and molecular weight changes are tracked for the scaffolds within a period of 35 days. The addition of HA keeps the pH in the alkaline region, which results in higher rate of degradation at an early period of observation, followed by a reduced rate of degradation later in the process. The final molecular weight is higher for the scaffolds with HA than for scaffolds of pure PLA. The manufactured scaffolds offer acceptable properties in terms of the pore size range and interconnectivity of the pores and porosity for non-load-bearing bone graft substitute; however, improvement to the mixing of the phases of PLA and HA is required to achieve better integrity of the composite scaffolds. © 2008 IMechE.

Tip Leakage Flow and Heat Transfer on Turbine Stage Tip and Casing: Effect of Unsteady Stator-Rotor Interactions

Unsteady simulations were performed to investigate time dependent behaviors of the leakage flow structures and heat transfer on the rotor blade tip and casing in a single stage gas turbine engine. This paper mainly illustrates the unsteady nature of the leakage flow and heat transfer, particularly, that caused by the stator–rotor interactions. In order to obtain time-accurate results, the effects of varying the number of time steps, sub iterations, and the number of vane passing periods was firstly examined. The effect of tip clearance height and rotor speeds was also examined. The results showed periodic patterns of the tip leakage flow and heat transfer rate distribution for each vane passing. The relative position of the vane and vane trailing edge shock with respect to time alters the flow conditions in the rotor domain, and results in significant variations in the tip leakage flow structures and heat transfer rate distributions. It is observed that the trailing edge shock phenomenon results in a critical heat transfer region on the blade tip and casing. Consequently, the turbine blade tip and casing are subjected to large fluctuations of Nusselt number (about Nu = 2000 to 6000 and about Nu = 1000 to 10000, respectively) at a high frequency (coinciding with the rotor speed).

Thermal properties and eutectic behaviour of dapivirine in combination with steroid hormones and other antiretrovirals

Background: Combination drug products can display thermal behaviour that is more complex than for the corresponding single drug products. For example, the contraceptive vaginal ring (VR) Nuvaring contains a eutectic (lowest melting) composition of etonogestrel (ETN) and ethinyl estradiol. Here we report the predisposition of dapivirine (DPV) to form reduced melting/eutectic mixtures when combined with other contraceptive hormones and antiretrovirals, and discuss the implications for development of combination microbicide and multipurpose prevention technology (MPT) products.
Methods: Binary mixtures of DPV with darunavir (DRV), levonorgestrel (LNG), ETN or maraviroc (MVC) were prepared either by physical mixing or by solvent evaporation. Selected binary mixtures were also incorporated into silicone elastomer (SE) VR devices. Thermal behavior of the mixtures was analyzed using differential scanning calorimetry (DSC) operating in standard heating ramp mode (10 °C/min). DSC data were used to construct two component phase diagrams for each binary system.
Results: Drug mixtures typically showed reduced melting transitions for both drug components, with clear evidence for a eutectic mixture at a well-defined intermediate composition. Eutectic temperatures and compositions for the various mixtures were: 40% DPV / 60% ETN - 170°C; 25% DPV / 75% MVC - 172°C; 65% DPV / 35% LNG - 192°C. In each case, the eutectic composition was also detected when the drug mixtures were incorporated into SE VRs. For the DPV/DRV system, the thermal behaviour is complicated by desolvation from the darunavir ethanolate polymorph.
Conclusions: When DPV is combined with small molecular weight hydrophobic drugs, the melting temperature for both drugs is typically reduced to a degree dependent on the composition of the mixture. At specified compositions, a low melting eutectic system results. The formation of eutectic behavior in binary drug systems needs to be carefully characterised in order to define product performance and drug release.

Validity of the Global Physical Activity Questionnaire (GPAQ) in assessing levels and change in moderate-vigorous physical activity and sedentary behaviour

Background

Feasible, cost-effective instruments are required for the surveillance of moderate-to-vigorous physical activity (MVPA) and sedentary behaviour (SB) and to assess the effects of interventions. However, the evidence base for the validity and reliability of the World Health Organisation-endorsed Global Physical Activity Questionnaire (GPAQ) is limited. We aimed to assess the validity of the GPAQ, compared to accelerometer data in measuring and assessing change in MVPA and SB.

Participants (n = 101) were selected randomly from an on-going research study, stratified by level of physical activity (low, moderate or highly active, based on the GPAQ) and sex. Participants wore an accelerometer (Actigraph GT3X) for seven days and completed a GPAQ on Day 7. This protocol was repeated for a random sub-sample at a second time point, 3–6 months later. Analysis involved Wilcoxon-signed rank tests for differences in measures, Bland-Altman analysis for the agreement between measures for median MVPA and SB mins/day, and Spearman’s rho coefficient for criterion validity and extent of change.

95 participants completed baseline measurements (44 females, 51 males; mean age 44 years, (SD 14); measurements of change were calculated for 41 (21 females, 20 males; mean age 46 years, (SD 14). There was moderate agreement between GPAQ and accelerometer for MVPA mins/day (r = 0.48) and poor agreement for SB (r = 0.19). The absolute mean difference (self-report minus accelerometer) for MVPA was −0.8 mins/day and 348.7 mins/day for SB; and negative bias was found to exist, with those people who were more physically active over-reporting their level of MVPA: those who were more sedentary were less likely to under-report their level of SB. Results for agreement in change over time showed moderate correlation (r = 0.52, p = 0.12) for MVPA and poor correlation for SB (r = −0.024, p = 0.916).

Levels of agreement with objective measurements indicate the GPAQ is a valid measure of MVPA and change in MVPA but is a less valid measure of current levels and change in SB. Thus, GPAQ appears to be an appropriate measure for assessing the effectiveness of interventions to promote MVPA.

Using postal questionnaires to evaluate physical activity and diet behaviour change: case study exploring implications of valid responder characteristics in interpreting intervention outcomes.

Background: Patient reported outcome measures (PROMs) are used to evaluate lifestyle interventions but littleis known about differences between patients returning valid and invalid responses, or of potential for bias inevaluations. We aimed to examine the characteristics of patients who returned valid responses to lifestylequestionnaires compared to those whose responses were invalid for evaluating lifestyle change. 
Methods: We conducted a secondary data analysis from the SPHERE Study, a trial of an intervention to improveoutcomes for patients with coronary heart disease in primary care. Postal questionnaires were used to assessphysical activity (Godin) and diet (DINE) among study participants at baseline and 18 month follow-up. Three binaryresponse variables were generated for analysis: (1) valid Godin score; (2) valid DINE Fibre score; and (3) validDINE Total Fat score. Multivariate analysis comprised generalised estimating equation regression to examine theassociation of patients’ characteristics with their return of valid responses at both timepoints. 
Results: Overall, 92.1% of participants (832/903) returned questionnaires at both baseline and 18 months. Relativelyfewer valid Godin scores were returned by those who left school aged <15 years (36.5%) than aged 18 and over(50.5%), manual workers (39.5%) than non-manual (49.5%) and those with an elevated cholesterol (>5 mmol)(34.7%) than those with a lower cholesterol (44.4%) but multivariate analysis identified that only school leaving age(p = 0.047) was of statistical significance.Relatively fewer valid DINE scores were returned by manual than non-manual workers (fibre: 80.8% v 86.8%;fat: 71.2% v 80.0%), smokers (fibre: 72.6% v 84.7%; fat: 67.5% v 76.9%), patients with diabetes (fibre: 75.9% v 82.9%;fat: 66.9% v 75.8%) and those with cholesterol >5 mmol (fat: 68.2% v 76.2%) but multivariate analysis showedstatistical significance only for smoking (fibre: p = 0.013; fat: p = 0.045), diabetes (fibre: p = 0.039; fat: p = 0.047), andcholesterol (fat: p = 0.039). 
Conclusions: Our findings illustrate the importance of detailed reporting of research methods, with clearinformation about response rates, respondents and valid outcome data. Outcome measures which are relevant to astudy population should be chosen carefully. The impact of methods of outcome measurement and valid responserates in evaluating healthcare requires further study.

The Landscape of Differences: Contact and Segregation in the Everyday Encounters

The article examines everyday life in Northern Ireland’s segregated communities and focus on a neglected empirical dimension of ethnic and social segregation developed within the socio-spatial relations between people and their built environment. It shows how the everyday urban encounters are reproduced through negotiating differences and the ways in which living in divided communities lead to social inequality and imbalanced use of space. The article employed qualitative research methods with individuals and community groups from the Fountain estate, a small Protestant enclave in Derry/Londonderry. Their stories were replete with cases of injustice and insights into the daily struggles that have generally occurred within theories of contact and social segregation as a whole. In fact, people in the Fountain presented their own intertextual references on what was more significant for them as a matter of routine survival and belonging, which allowed them to be more constructive about themselves. While segregation has persisted for multiple decades; time is believed to be the factor most likely to change it, as it is hoped that the younger generation will provide lasting change to Northern Ireland and eventual peace between currently segregated communities.

Electrical conduction and rheological behaviour of composites of poly(epsilon-caprolactone) and MWCNTs

Two mechanisms of conduction were identified from temperature dependent (120 K-340 K) DC electrical resistivity measurements of composites of poly(c-caprolactone) (PCL) and multi-walled carbon nanotubes (MWCNTs). Activation of variable range hopping (VRH) occurred at lower temperatures than that for temperature fluctuation induced tunneling (TFIT). Experimental data was in good agreement with the VRH model in contrast to the TFIT model, where broadening of tunnel junctions and increasing electrical resistivity at T > T-g is a consequence of a large difference in the coefficients of thermal expansion of PCL and MWCNTs. A numerical model was developed to explain this behavior accounting for a thermal expansion effect by supposing the large increase in electrical resistivity corresponds to the larger relative deformation due to thermal expansion associated with disintegration of the conductive MWCNT network. MWCNTs had a significant nucleating effect on PCL resulting in increased PCL crystallinity and an electrically insulating layer between MWCNTs. The onset of rheological percolation at similar to 0.18 vol% MWCNTs was clearly evident as storage modulus, G' and complex viscosity, vertical bar eta*vertical bar increased by several orders of magnitude. From Cole-Cole and Van Gurp-Palmen plots, and extraction of crossover points (G(c)) from overlaying plots of G' and G '' as a function of frequency, the onset of rheological percolation at 0.18 vol% MWCNTs was confirmed, a similar MWCNT loading to that determined for electrical percolation. 

Changes in the acoustic environment alter the foraging and sheltering behaviour of the cichlid Amititlania nigrofasciata

Anthropogenic noise can affect behaviour across a wide range of species in both terrestrial and aquatic environments. However, behaviours might not be affected in isolation. Therefore, a more holistic approach investigating how environmental stressors, such as noise pollution, affect different behaviours in concert is necessary. Using tank-based noise exposure experiments, we tested how changes in the acoustic environment affect the behaviour of the cichlid Amatitlania nigrofasciata. We found that exposure to anthropogenic noise affected a couple of behaviours: an increase in sheltering was accompanied by a decrease in foraging. Our results highlight the multiple negative effects of an environmental stressor on an individual's behaviour.