Characterisation of Laser Beam and Paper Material Interaction

It is known already from 1970´s that laser beam is suitable for processing paper materials. In this thesis, term paper materials mean all wood-fibre based materials, like dried pulp, copy paper, newspaper, cardboard, corrugated board, tissue paper etc. Accordingly, laser processing in this thesis means all laser treatments resulting material removal, like cutting, partial cutting, marking, creasing, perforation etc. that can be used to process paper materials. Laser technology provides many advantages for processing of paper materials: non-contact method, freedom of processing geometry, reliable technology for non-stop production etc. Especially packaging industry is very promising area for laser processing applications. However, there are only few industrial laser processing applications worldwide even in beginning of 2010´s. One reason for small-scale use of lasers in paper material manufacturing is that there is a shortage of published research and scientific articles. Another problem, restraining the use of laser for processing of paper materials, is colouration of paper material i.e. the yellowish and/or greyish colour of cut edge appearing during cutting or after cutting. These are the main reasons for selecting the topic of this thesis to concern characterization of interaction of laser beam and paper materials. This study was carried out in Laboratory of Laser Processing at Lappeenranta University of Technology (Finland). Laser equipment used in this study was TRUMPF TLF 2700 carbon dioxide laser that produces a beam with wavelength of 10.6 μm with power range of 190-2500 W (laser power on work piece). Study of laser beam and paper material interaction was carried out by treating dried kraft pulp (grammage of 67 g m-2) with different laser power levels, focal plane postion settings and interaction times. Interaction between laser beam and dried kraft pulp was detected with different monitoring devices, i.e. spectrometer, pyrometer and active illumination imaging system. This way it was possible to create an input and output parameter diagram and to study the effects of input and output parameters in this thesis. When interaction phenomena are understood also process development can be carried out and even new innovations developed. Fulfilling the lack of information on interaction phenomena can assist in the way of lasers for wider use of technology in paper making and converting industry. It was concluded in this thesis that interaction of laser beam and paper material has two mechanisms that are dependent on focal plane position range. Assumed interaction mechanism B appears in range of average focal plane position of 3.4 mm and 2.4 mm and assumed interaction mechanism A in range of average focal plane position of 0.4 mm and -0.6 mm both in used experimental set up. Focal plane position 1.4 mm represents midzone of these two mechanisms. Holes during laser beam and paper material interaction are formed gradually: first small hole is formed to interaction area in the centre of laser beam cross-section and after that, as function of interaction time, hole expands, until interaction between laser beam and dried kraft pulp is ended. By the image analysis it can be seen that in beginning of laser beam and dried kraft pulp material interaction small holes off very good quality are formed. It is obvious that black colour and heat affected zone appear as function of interaction time. This reveals that there still are different interaction phases within interaction mechanisms A and B. These interaction phases appear as function of time and also as function of peak intensity of laser beam. Limit peak intensity is the value that divides interaction mechanism A and B from one-phase interaction into dual-phase interaction. So all peak intensity values under limit peak intensity belong to MAOM (interaction mechanism A one-phase mode) or to MBOM (interaction mechanism B onephase mode) and values over that belong to MADM (interaction mechanism A dual-phase mode) or to MBDM (interaction mechanism B dual-phase mode). Decomposition process of cellulose is evolution of hydrocarbons when temperature is between 380- 500°C. This means that long cellulose molecule is split into smaller volatile hydrocarbons in this temperature range. As temperature increases, decomposition process of cellulose molecule changes. In range of 700-900°C, cellulose molecule is mainly decomposed into H2 gas; this is why this range is called evolution of hydrogen. Interaction in this range starts (as in range of MAOM and MBOM), when a small good quality hole is formed. This is due to “direct evaporation” of pulp via decomposition process of evolution of hydrogen. And this can be seen can be seen in spectrometer as high intensity peak of yellow light (in range of 588-589 nm) which refers to temperature of ~1750ºC. Pyrometer does not detect this high intensity peak since it is not able to detect physical phase change from solid kraft pulp to gaseous compounds. As interaction time between laser beam and dried kraft pulp continues, hypothesis is that three auto ignition processes occurs. Auto ignition of substance is the lowest temperature in which it will spontaneously ignite in a normal atmosphere without an external source of ignition, such as a flame or spark. Three auto ignition processes appears in range of MADM and MBDM, namely: 1. temperature of auto ignition of hydrogen atom (H2) is 500ºC, 2. temperature of auto ignition of carbon monoxide molecule (CO) is 609ºC and 3. temperature of auto ignition of carbon atom (C) is 700ºC. These three auto ignition processes leads to formation of plasma plume which has strong emission of radiation in range of visible light. Formation of this plasma plume can be seen as increase of intensity in wavelength range of ~475-652 nm. Pyrometer shows maximum temperature just after this ignition. This plasma plume is assumed to scatter laser beam so that it interacts with larger area of dried kraft pulp than what is actual area of beam cross-section. This assumed scattering reduces also peak intensity. So result shows that assumably scattered light with low peak intensity is interacting with large area of hole edges and due to low peak intensity this interaction happens in low temperature. So interaction between laser beam and dried kraft pulp turns from evolution of hydrogen to evolution of hydrocarbons. This leads to black colour of hole edges.

Thermal radiation in combustion systems

A numerical procedure for solving the nongray radiative transfer equation (RTE) in two-dimensional cylindrical participating media is presented. Nongray effects are treated by using a narrow-band approach. Radiative emission from CO, CO2, H2O, CH4 and soot is considered. The solution procedure is applied to study radiative heat transfer in a premixed CH4-O2, laminar, flame. Temperature, soot and IR-active species molar fraction distributions are allowed to vary in the axial direction of the flame. From the obtained results it is possible to quantify the radiative loss in the flame, as well as the importance of soot radiation as compared to gaseous radiation. Since the solution procedure is developed for a two-dimensional cylindrical geometry, it can be applied to other combustion systems such as furnaces, internal combustion engines, liquid and solid propellant combustion.

Arc fusion of self-fluxed nickel alloys

Self-fluxed nickel alloys are usually flame fused after thermal spraying. However, due to the practical aspects of high temperatures reached during flame fusing, large structures such as the hydraulic turbines for power generation, can not be efficiently coated. An alternative is to fuse the sprayed coating with a gas tungsten electric arc. In this case, heating is much more intensive and substrate temperature during and after the fusing operation is much lower, thus reducing the possibility that any problem will occur. In this work, coatings of self-fluxed nickel alloy fused by flame and gas tungsten arc were evaluated as protection of hydraulic turbines against cavitational damage. Several tests were performed, including the ASTM ultrasonically vibration-induced cavitation, optical and scanning electronic microscopic metallography, and hardness tests. The results showed that the arc-fused coating presented better cavitation damage resistance, probably due to its finer microstructure. A field application of this new technique is also described. A self-fluxed Ni alloy was flame sprayed in critical regions of Francis-type hydraulic turbine blades and fused by a gas tungsten arc after spraying. The blades will be inspected during the next two years.

An experimental investigation of the effects of nozzle ellipticity on the flow structure of co-flow jet diffusion flames

The flow structure of cold and ignited jets issuing into a co-flowing air stream was experimentally studied using a laser Doppler velocimeter. Methane was employed as the jet fluid discharging from circular and elliptic nozzles with aspect ratios varying from 1.29 to 1.60. The diameter of the circular nozzle was 4.6 mm and the elliptic nozzles had approximately the same exit area as that of the circular nozzle. These non-circular nozzles were employed in order to increase the stability of attached jet diffusion flames. The time-averaged velocity and r.m.s. value of the velocity fluctuation in the streamwise and transverse directions were measured over the range of co-flowing stream velocities corresponding to different modes of flame blowout that are identified as either lifted or attached flames. On the basis of these measurements, attempts were made to explain the existence of an apparent optimum aspect ratio for the blowout of attached flames observed at higher values of co-flowing stream velocities. The insensitivity of the blowout limits of lifted flames to nozzle geometry observed in our previous work at low co-flowing stream velocities was also explained. Measurements of the fuel concentration at the jet centerline indicated that the mixing process was enhanced with the 1.38 aspect ratio jet compared with the 1.60 aspect ratio jet. On the basis of the obtained experimental data, it was suggested that the higher blowout limits of attached flames for an elliptic jet of 1.38 aspect ratio was due to higher entrainment rates.

Comparison of Biomass Gasification Technologies for Natural Gas Substitution in Iron Ore Pelletizing Plants

The iron ore pelletizing process consumes high amounts of energy, including nonrenewable sources, such as natural gas. Due to fossil fuels scarcity and increasing concerns regarding sustainability and global warming, at least partial substitution by renewable energy seems inevitable. Gasification projects are being successfully developed in Northern Europe, and large-scale circulating fluidized bed biomass gasifiers have been commissioned in e.g. Finland. As Brazil has abundant biomass resources, biomass gasification is a promising technology in the near future. Biomasses can be converted into product gas through gasification. This work compares different technologies, e.g. air, oxygen and steam gasification, focusing on the use of the product gas in the indurating machine. The use of biosynthetic natural gas is also evaluated. Main parameters utilized to assess the suitability of product gas were adiabatic flame temperature and volumetric flow rate. It was found that low energy content product gas could be utilized in the traveling grate, but it would require burner’s to be changed. On the other hand, bio-SGN could be utilized without any adaptions. Economical assessment showed that all gasification plants are feasible for sizes greater than 60 MW. Bio-SNG production is still more expensive than natural gas in any case.

Sähköisen taloushallinnon kehitys ja ilmiön näkyvyys alan ammattilehtikirjoittelussa

Pro gradu –tutkielman ensisijaisena tavoitteena on tutkia sähköisen ta-loushallinnon kehitystä ja miten se on näkynyt alan suomalaisessa ja kansainvälisessä ammattilehtikirjoittelussa vuosina 1997 – 2013. Tarkoi-tuksena on löytää kirjoittelun perusteella sähköisen taloushallinnon kehi-tyksen edistäviä ja hidastavia tekijöitä sekä minkälaisia tulevaisuuden näkymiä artikkelit luovat sähköiselle taloushallinnolle. Lisäksi tavoitteena on löytää yhtäläisyyksiä ja eroja kansallisen ja kansainvälisen kirjoittelun välillä. Tutkielma on laadullinen tutkimus ja tutkimusmenetelminä käytetään si-sällönanalyysia, sisällönerittelyä, teemoittelua ja vertailevaa tutkimusta. Tutkielman empiirinen aineisto koostuu Tilisanomien, Balanssi–lehden ja Accountancy–lehden sähköistä taloushallintoa koskevista artikkeleista aikavälillä 1997 – 2013. Tutkimustulosten perusteella sähköisen taloushallinnon kehityskulku näkyy myös ammattilehtikirjoittelussa. Tietojärjestelmät ja niiden käytön mahdollistava lainsäädäntö ovat sähköisen taloushallinnon perusedelly-tykset. Suurimpia kehityksen edistäjiä ovat julkinen valta, verkkolaskut ja standardointi. Kehityksen hidastajina nähdään yhtenäisten standardien puute ja asenteet. Sähköisen taloushallinnon tulevaisuuden näkymiä ovat standardoidut prosessit ja käsitteet koko taloushallinnon alueella sekä viranomaisraportointi XBRL-kielen avulla. Suurimmat erot kansalli-sessa ja kansainvälisessä kehityksessä on havaittavissa verkkolaskuissa ja XBRL-raportoinnissa. Johtopäätöksenä todetaan että kirjoittelun perusteella voidaan löytää sähköisen taloushallinnon kehitystä hidastavia ja edistäviä tekijöitä ja se luo viitteitä tulevaisuuden kehitykselle. Sähköinen taloushallinto kehittyy kunkin maan valtiovallan tahtotilan ja lainsäädännön mukaan. Jatkotut-kimuskohteena tutkielmaa voisi laajentaa kansainvälisemmäksi ottamalla mukaan tarkasteluun useampia kansainvälisiä lehtiä ja kansainvälistä lainsäädäntöä.

Use of growth retardants in wheat

In general, lodging has been controlled by restricting nitrogen fertilizer application and/or using short cultivars. Growth retardants can also be used to solve this problem.The objective of this study was to evaluate the effect of rates and application times of three growth retardants on Pioneiro wheat cultivar. The trial was carried out in Viçosa-MG, from May to September 2005, in a factorial and hierarchical scheme, in a randomized block design with four replications and a control treatment. The treatments consisted of 500, 1,000 and 1,500 g ha-1 of chlormequat; 62.5, 125 and 187.5 g ha-1 of trinexapac-ethyl and 40, 80 and 120 g ha-1 of paclobutrazol applied at growth stages 6 or 8, growth stage used on the scale of Feeks and Large, and a control treatment without growth retardant application. Only trinexapac-ethyl and chlormequat were efficient in reducing plant height; the effect of chlormequat and paclobutrazol on plant height was independent of the application time, but the trinexapac-ethyl at growth stage 8 produced shorter plant height than at stage 6. Increasing growth retardant rates produced shorter plant heights; chlormequat and paclobutrazol did not affect grain yield. However, the highest trinexapac-ethyl rates reduced wheat yield.

Physiological response of vicia faba to prohexadione-calcium under saline conditions

Changes in the activities of oxidative enzymes (indole acetic acid oxidase, peroxidase and catalase), endogenous hormones (gibberellic acid (GA3), indole acetic acid (IAA), abscisic acid (ABA) and cytokinins (AsZeatin), photosynthetic pigments (chlorophyll a, chlorophyll b and carotenoids), total carbohydrates, total soluble sugars, amino acid proline and vegetative growth parameters were used as indicators to explain the physiological role of the growth retardant prohexadione-calcium on Vicia faba seedlings 40 days after sowing under salinity stress for 30 days. The obtained results show that soaking faba bean seeds prior to sowing at different concentrations of prohexadione-calcium (0, 10, 20 and 30 ppm) significantly increased the activities of indole acetic acid oxidase (IAA-oxidase) and peroxidase enzymes, but decreased the catalase enzyme activity as compared with their respective control. Application of prohexadione-Ca caused markedly decreases in the endogenous contents of gibberellins and indole acetic acid (IAA) but increased the levels of natural growth inhibitor abscisic acid (ABA) and cytokinins in the shoots of faba bean seedlings. All the prohexadione-Ca concentrations increased the contents of amino acid proline, photosynthetic pigments (chlorophyll a, chlorophyll b and carotenoids), total carbohydrates and total soluble sugars in faba bean seedlings grown under salt stress. Application of prohexadione-Ca decreased significantly seedling height and shoot fresh weight but significantly increased shoot dry weight.

Koivuvanerin palonkesto-ominaisuuksien parantaminen liimaseoksen koostumusta muuttamalla

Viime vuosina puutuotteiden palonkestävyydelle asetetut vaatimukset ovat kasvaneet. Puutuotteiden käyttöä on mahdollista lisätä, mikäli niiden palonkestävyyttä saadaan parannettua. Tässä diplomityössä tutkittiin palonestoaineiden vaikutusta liimaseoksen ominaisuuksiin, liimautuvuuteen ja palonkestävyyteen. Työn tarkoituksena oli löytää liimaseos, jonka avulla saadaan koivuvanerin palonkestävyyttä parannettua. Teoriaosuudessa on käyty läpi koivuvanerin valmistusprosessi ja käytettävät liimat, ominaisuudet sekä käyttökohteet. Teoriaosuudessa käsitellään myös puutuotteiden syttymistä ja vertaillaan erilaisia palonestoaineita ja niiden vaikutusmekanismeja. Työn kokeellinen osuus koostui hartsiseoksen imeytyvyyden tutkimisesta, liimaseosten ominaisuuksien selvittämisestä, vanerilevyjen liimautuvuuden ja liimauslujuuden testaamisesta sekä palonkestävyysominaisuuksien selvittämisestä. Työssä saavutettiin pientä parannusta levyjen palonkestävyysominaisuuksiin. Tavoitteeksi asetettua palonkestävyyden kaksinkertaistumista ei saavutettu. Työ antaa kuitenkin hyvän pohjan palonestoaineiden ja vanerihartsien palonkestävyys-ominaisuuksien tutkimisen jatkamiselle. Työssä saavutettuja tuloksia tullaan hyödyntämään vanerilevyjen palo-ominaisuuksien parantamiseen tähtäävissä tutki-muksissa.

Sunflower response to repeated foliar applications of Paclobutrazol

Paclobutrazol (PBZ), a well-known growth retardant of the triazole family, is mostly used for controlling plant size and growth, resulting in more desirable compact plants for floricultural purposes; however, limited experimental data are available for use of PBZ in field sunflower. The objective of this study was to evaluate the effect of repeated foliar applications of PBZ at rates of 50 + 50 g ha-1(double application) and 50 + 50 + 50 g ha-1 (triple application) on sunflower morphology and productivity. PBZ applications corresponded to growth stages of four to five, five to six, and six to eight true leaves of sunflower plants, respectively. The double foliar application of PBZ reduced sunflower plant height at maturity by 4.4% (or by 11.7 cm). The triple foliar application of PBZ reduced sunflower plant height at maturity by 14.4% (or by 49.2 cm). However, PBZ either in the double or the triple application reduced achene yield per plant by 25.6% and 22.5% and the 100-achene weight by 11.4% and 25.0%, respectively, compared with the non-treated control. Overall, the repeated foliar applications of PBZ at the rates tested in this study, apart from providing a reduction of sunflower plant height, had major adverse effects on achene yield and weight. Thus, different application schemes of PBZ or perhaps different growth regulators should be investigated to control plant height in sunflower.

Kyberaseiden vaikutus kriittisen infrastruktuurin tietojärjestelmiin

Työn tehtävänä on selvittää lähdemateriaalin avulla hyökkäys- ja puolustusmenetelmistä valtiolliseen kyberturvallisuuteen liittyvät keskeisimmät menetelmät ja niiden vaikutukset, tarkastelemalla niitä maailmalla tapahtuneiden kyberhyökkäyksien pohjalta. Tutkimuksella pyritään vastaamaan seuraaviin alakysymyksiin: minkä tyyppisiä kyberaseita käytetään kriittisen infrastruktuurin tietojärjestelmiä vastaan, mikä on niiden vaikutus ja millaisia kyberhyökkäyksiä valtioiden kriittisen infrastruktuurin tietojärjestelmiä vastaan maailmalla on toteutettu sekä miten ne kyetään suojaamaan näiltä kyberuhilta? Tavoitteena on, että tutkimuksella kasvatetaan lukijan tietämystä kyberavaruuden vaaroista ja kriittisen infrastruktuurin tietojärjestelmistä. Keskeiset lähderyhmät ovat aiemmat tutkimukset, kirjallisuus, uutisartikkelit ja erityisesti sähköiset lähteet. Tärkeimpiä yksittäisiä lähteitä ovat muun muassa Suomen valtioneuvoston tuottama Suomen kyberturvallisuustrategia-periaatepäätös (2012) ja Mika-Jan Pullisen tekemä opinnäytetyö Kriittisten tietojärjestelmien suojaaminen kyberuhilta (2012). Tutkimusmenetelmänä käytetään kirjallisuuskatsausta. Tietojärjestelmiin hyökätessä käytetään yhä ammattimaisempia välineitä. Hyökkäystarkoituksen pohjalta suunnitellut ja valmistetut hienostuneet ohjelmistot ovat usein kyberterroristien tai jopa valtiollisten toimijoiden suunnittelemia. Kyberhyökkäyksistä vain prosentti on ollut varsinaisia valtioiden tuottamia kyberaseita. Merkittävinä kyberhyökkäyksinä voidaan pitää muun muassa Stuxnet-tietokonematoa, Flame-vakoiluohjelmaa ja Shamoon-tietokonevirusta. Kyberhyökkäyksistä Stuxnet-tietokonemadolla kyettiin tuottamaan fyysistä vahinkoa tietojärjestelmiin kohdistuvan vaikutuksen lisäksi. Kriittisen infrastruktuurin tietojärjestelmien suojaamisessa käytetään samoja menetelmiä kuin muissa yleisissä tietojärjestelmissä. Suojaus muodostuu kattavasta tietoturvasta, joka pitää sisällään hallinnollisen, henkilöstö-, fyysisen ja tietoliikenneturvallisuuden. Kriittisten tietojärjestelmien suojaus voidaan toteuttaa virustorjuntaohjelmistoilla, eristämällä kriittiset tietojärjestelmät yleisestä verkosta kokonaan, käyttämällä palomuuria, identiteetin- ja pääsynhallinnalla, vahvoilla salausmenetelmillä ja tekemällä omaa tietojärjestelmää vastaan koehyökkäyksiä, joilla löydetään tietojärjestelmän haavoittuvuudet.

Chemical composition, acetylcholinesterase inhibitory and antifungal activities of Pera glabrata (Schott) Baill. (Euphorbiaceae)

Pera glabrata (Schott) Baill. was selected for this study after showing a preliminary positive result in a screening of Atlantic Forest plant species in the search for acetylcholinesterase inhibitors and antifungal compounds. The bioassays were conducted with crude ethanol extract of the leaves using direct bioautography method for acetylcholinesterase and antifungal activities. This extract was partitioned with hexane, chloroform and ethyl acetate solvents. The active chloroform fraction was submitted to silica gel chromatography column affording 12 groups. Caffeine, an alkaloid, which showed detection limits of 0.1 and 1.0 µg for anticholinesterasic and antifungal activities, respectively, was isolated from group nine. After microplate analyses, only groups four, nine, 10, 11 and 12 showed acetylcholinesterase inhibitory activity of 40% or higher. The group 12 was purified by preparative layer chromatography affording four sub-fractions. Two sub-fractions from this group were analyzed by gas chromatography-mass spectrometry and gas chromatography-flame ionization detector. The first sub-fraction showed anticholinesterasic activity and contained two major compounds: 9-hydroxy-4-megastigmen-3-one (84%) and caffeine (6%). The second sub-fraction presented five major compounds identified as 9-hydroxy-4-megastigmen-3-one, isololiolide, (-) loliolide, palmitic acid and lupeol and did not show activity.

Preparation of mitotic chromosomes of leaf-cutting ants from the genera Atta and Acromyrmex

Some modifications were made to the methodology of Imai et al. (Jpn. J. Genet. 63: 159-185, 1988) for cytogenetic analysis of the leaf-cutting ants Atta sexdens piriventris and Acromyrmex heyeri (Hymenoptera, Formicidae), shortening preparation time and improving chromosomal preparations. The brain ganglia of prepupae were dissected in a 0.0025% hypotonic solution of colchicine, placed on a glass slide on a cold plate (4 ± 1oC) for 20 min. The material was fixed directly on the cold slide (with cold fixative I), macerated with a histological needle and fixed again with fixative I, followed by fixatives II and III, all of them cold. The slide was flame-dried right after the use of fixative III, and it was allowed to air-dry at room temperature for 2 h. The resulting metaphases presented less contracted chromosomes, with separated and well defined sister chromatids at a high frequency, when the material was processed in the manner described and stained with 3% Giemsa in phosphate buffer (pH 6.8) for 15 min.

Lämpökynttilän palo-ominaisuuksiin vaikuttavien tekijöiden analytiikka: raaka-aineet, sydänlanka, rakenne ja olosuhteet

Työn tavoitteena oli tutkia lämpökynttilän palo-ominaisuuksiin vaikuttavia tekijöitä. Työn taustalla on yhteistyö suomalaisen kynttilävalmistajan kanssa. Kynttilävalmistajan lämpökynttilöissään käyttämän raaka-aineen hinnan noustessa, on valmistaja kiinnostunut käyttämään edullisempia raaka-aineita. Palamisen kriteerit saavuttavan kynttilän valmistaminen markkinoilla olevista uusista raaka-aineista on havaittu olevan haastavaa, ja vaatii edelleen kehitystyötä. Teoriaosassa käytiin läpi kynttilänvalmistusta yleisesti, RAL-laatustandardin asettamat kriteerit lämpökynttilälle, palamiseen vaikuttavia tekijöitä sekä työn kokeellisessa osassa käytettyjen analyysimenetelmien periaatteet. Työn kokeellisessa osassa tutkittiin erilaisten kynttiläraaka-aineiden koostumusta ja ominaisuuksia sekä sydänlankojen rakennetta. Lisäksi tutkittiin, miten sydänlangan sisältämien säikeiden määrä, eri raaka-aineiden seossuhteiden muutos sekä jäähdytyslämpötilan muutos vaikuttavat lämpökynttilän palo-ominaisuuksiin. Työssä myös selvitettiin muutaman markkinoilla olevan kynttilän raaka-ainekoostumus. Tutkimuksissa havaittiin, että vaadittavan liekin korkeuden saavuttamiseksi viskositeetti on yksi raaka-aineen tärkeimmistä ominaisuuksista. Raaka-aineen viskositeetin kasvaessa tarvitaan paksumpi sydänlanka. Raaka-aineen viskositeetin kasvaessa liekin korkeus ei aina pienene, koska liekin korkeuteen vaikuttaa myös langalle tehty kemiallinen käsittely. Mitä korkeampi kynttilän liekki on, sitä suurempi on raaka-aineen kulutus eli palovuo ja tällöin liekin korkeus vaikuttaa myös kynttilän paloaikaan. Kokeissa havaittiin, että liekin korkeuden ollessa vakio, palovuo oli korkein steariinilla. Steariinin jälkeen tulivat palmuvaha ja parafiini. Tällöin parafiinia tarvittiin vähemmän vastaavan paloajan saavuttamiseksi. Nopean jäähdytyksen havaittiin vaikuttavan palmuvahan palovuohon alentavasti, vaikka jäähdytystavalla ei ollut vaikutusta liekin korkeuteen.

Familial predisposition to hypertension and the association between urinary sodium excretion and blood pressure in a population-based sample of young adults

The reasons for the inconsistent association between salt consumption and blood pressure levels observed in within-society surveys are not known. A total of 157 normotensive subjects aged 18 to 35 years, selected at random in a cross-sectional population-based survey, answered a structured questionnaire. They were classified as strongly predisposed to hypertension when two or more first-degree relatives had a diagnosis of hypertension. Anthropometric parameters were obtained and sitting blood pressure was determined with aneroid sphygmomanometers. Sodium and potassium excretion was measured by flame spectrophotometry in an overnight urine sample. A positive correlation between blood pressure and urinary sodium excretion was detected only in the group of individuals strongly predisposed to hypertension, both for systolic blood pressure (r = 0.51, P<0.01) and diastolic blood pressure (r = 0.50, P<0.01). In a covariance analysis, after controlling for age, skin color and body mass index, individuals strongly predisposed to hypertension who excreted amounts of sodium above the median of the entire sample had higher systolic and diastolic blood pressure than subjects classified into the remaining conditions. The influence of familial predisposition to hypertension on the association between salt intake and blood pressure may be an additional explanation for the weak association between urinary sodium excretion and blood pressure observed in within-population studies, since it can influence the association between salt consumption and blood pressure in some but not all inhabitants.