Using music as a signal for biofeedback

Studies on the potential benefits of conveying biofeedback stimulus using a musical signal have appeared in recent years with the intent of harnessing the strong effects that music listening may have on subjects. While results are encouraging, the fundamental question has yet to be addressed, of how combined music and biofeedback compares to the already established use of either of these elements separately. This experiment, involving young adults (N = 24), compared the effectiveness at modulating participants' states of physiological arousal of each of the following conditions: A) listening to pre-recorded music, B) sonification biofeedback of the heart rate, and C) an algorithmically modulated musical feedback signal conveying the subject's heart rate. Our hypothesis was that each of the conditions (A), (B) and (C) would differ from the other two in the extent to which it enables participants to increase and decrease their state of physiological arousal, with (C) being more effective than (B), and both more than (A). Several physiological measures and qualitative responses were recorded and analyzed. Results show that using musical biofeedback allowed participants to modulate their state of physiological arousal at least equally well as sonification biofeedback, and much better than just listening to music, as reflected in their heart rate measurements, controlling for respiration-rate. Our findings indicate that the known effects of music in modulating arousal can therefore be beneficially harnessed when designing a biofeedback protocol.

Power quality improving with virtual flux-based voltage source line converter

Line converters have become an attractive AC/DC power conversion solution in industrial applications. Line converters are based on controllable semiconductor switches, typically insulated gate bipolar transistors. Compared to the traditional diode bridge-based power converters line converters have many advantageous characteristics, including bidirectional power flow, controllable de-link voltage and power factor and sinusoidal line current. This thesis considers the control of the lineconverter and its application to power quality improving. The line converter control system studied is based on the virtual flux linkage orientation and the direct torque control (DTC) principle. A new DTC-based current control scheme is introduced and analyzed. The overmodulation characteristics of the DTC converter are considered and an analytical equation for the maximum modulation index is derived. The integration of the active filtering features to the line converter isconsidered. Three different active filtering methods are implemented. A frequency-domain method, which is based on selective harmonic sequence elimination, anda time-domain method, which is effective in a wider frequency band, are used inharmonic current compensation. Also, a voltage feedback active filtering method, which mitigates harmonic sequences of the grid voltage, is implemented. The frequency-domain and the voltage feedback active filtering control systems are analyzed and controllers are designed. The designs are verified with practical measurements. The performance and the characteristics of the implemented active filtering methods are compared and the effect of the L- and the LCL-type line filteris discussed. The importance of the correct grid impedance estimate in the voltage feedback active filter control system is discussed and a new measurement-based method to obtain it is proposed. Also, a power conditioning system (PCS) application of the line converter is considered. A new method for correcting the voltage unbalance of the PCS-fed island network is proposed and experimentally validated.

Field Sales Management Control: Towards a Multi-Level Theory

The purpose of this dissertation is to increase the understanding and knowledge of field sales management control systems (i.e. sales managers monitoring, directing, evaluating and rewarding activities) and their potential consequences on salespeople. This topic is important because research conducted in the past has indicated that the choice of control system type can on the other hand have desirable consequences, such as high levels of motivation and performance, and on the other hand leadto harmful unintended consequences, such as opportunistic or unethical behaviors. Despite the fact that marketing and sales management control systems have been under rigorous research for over two decades, it still is at a very early stage of development, and several inconsistencies can be found in the research results. This dissertation argues that these inconsistencies are mainly derived from misspecification of the level of analysis in the past research. These different levels of analysis (i.e. strategic, tactical, and operational levels) involve very different decision-making situations regarding the control and motivation of sales force, which should be taken into consideration when conceptualizing the control. Moreover, the study of salesperson consequences of a field sales management control system is actually a cross-level phenomenon, which means that at least two levels of analysis are simultaneously involved. The results of this dissertation confirm the need to re-conceptualize the field sales management control system concept. It provides empirical evidence for the assertion that control should be conceptualized with more details atthe tactical/operational level of analysis than at the strategic levelof analysis. Moreover, the results show that some controls are more efficiently communicated to field salespeople than others. It is proposed that this difference is due to different purposes of control; some controls aredesigned for influencing salespersons' behavior (aim at motivating) whereas some controls are designed to aid decision-making (aim at providing information). According to the empirical results of this dissertation, the both types of controls have an impact to the sales force, but this impactis not as strong as expected. The results obtained in this dissertation shed some light to the nature of field sales management control systems, and their consequences on salespeopl

Converter-flux-based current control of voltage source PWM rectifiers - analysis and implementation

Pulsewidth-modulated (PWM) rectifier technology is increasingly used in industrial applications like variable-speed motor drives, since it offers several desired features such as sinusoidal input currents, controllable power factor, bidirectional power flow and high quality DC output voltage. To achieve these features,however, an effective control system with fast and accurate current and DC voltage responses is required. From various control strategies proposed to meet these control objectives, in most cases the commonly known principle of the synchronous-frame current vector control along with some space-vector PWM scheme have been applied. Recently, however, new control approaches analogous to the well-established direct torque control (DTC) method for electrical machines have also emerged to implement a high-performance PWM rectifier. In this thesis the concepts of classical synchronous-frame current control and DTC-based PWM rectifier control are combined and a new converter-flux-based current control (CFCC) scheme is introduced. To achieve sufficient dynamic performance and to ensure a stable operation, the proposed control system is thoroughly analysed and simple rules for the controller design are suggested. Special attention is paid to the estimationof the converter flux, which is the key element of converter-flux-based control. Discrete-time implementation is also discussed. Line-voltage-sensorless reactive reactive power control methods for the L- and LCL-type line filters are presented. For the L-filter an open-loop control law for the d-axis current referenceis proposed. In the case of the LCL-filter the combined open-loop control and feedback control is proposed. The influence of the erroneous filter parameter estimates on the accuracy of the developed control schemes is also discussed. A newzero vector selection rule for suppressing the zero-sequence current in parallel-connected PWM rectifiers is proposed. With this method a truly standalone and independent control of the converter units is allowed and traditional transformer isolation and synchronised-control-based solutions are avoided. The implementation requires only one additional current sensor. The proposed schemes are evaluated by the simulations and laboratory experiments. A satisfactory performance and good agreement between the theory and practice are demonstrated.

Balanced Scorecardin implementointi ja käytön nykytila Suomessa

Lisääntynyt Balanced Scorecardin käyttö herätti kiinnostuksen tutkia, mistä BSC:ssä oli oikein kysymys. Epäonnistumiset BSC-projekteissa vaikuttivat siihen, että haluttiin tutkia, mikä nykyisissä projektimalleissa oli vikana. Kirjallisuudessa on esitetty useita BSC:n käyttöönoton projektimalleja, joista tunnetuin on Kaplanin ja Nortonin kehittämä malli. Alun perin kyseessä oli varsin operatiivinen suoritusmittaristo, jonka tavoitteena oli nostaa ei-taloudelliset mittarit taloudellisten mittareiden rinnalle. Sittemmin lähestymistapa onlaajentunut strategiapohjaiseksi johtamisen järjestelmäksi, mutta mallin rakentamisessa on vielä puutteita. Havaitut puutteet BSC-projektimalleissa loivat tarpeen uuden mallin kehittämiselle. Tutkimuksen tavoitteena oli kehittää suomalaisten yritysjohtajien ja alan asiantuntijoiden avulla BSC-projektimalli, jota käyttämällä yritykset voisivat menestyksekkäämmin toteuttaa BSC-projektinsa. Lisäksi tavoitteena oli selvittää BSC:n käytön nykytila Suomen 500 suurimmassa yrityksessä. Tutkimuksessa haluttiin myös hankkia tietoa siitä, miksi yritykset olivat lähteneet BSC-projektiin, mitkä tekijät vaikuttivat BSC-projektin onnistumiseen jamitä muutoksia yritykset olivat tehneet BSC:n käytännön kokemuksen pohjalta. Tutkimuksen teoriaosassa tarkasteltiin yrityksen strategista suunnittelua ja johtamista, yrityksen johtamisessa käytettyjä ohjausjärjestelmiä, toiminnan kehittämistä ja BSC-projektien toteuttamista. Tutkimuksen empiriisessä osassa kehitettiinkymmenvaiheinen BSC-projektin toteuttamismalli. Se tehtiin tutustumalla 15 konsultointiyrityksen tapaan toteuttaa BSC-projekti ja paneutumalla 50 yrityksen BSC-projektista saamiin kokemuksiin. Kehitettyä mallia testattiin Tulikivi-casessa,ja sitä arvioitiin kyselytutkimuksessa ja työistunnossa. Kyselytutkimuksen mukaan ensimmäiset suomalaiset yritykset aloittivat BSC:n käytön vuonna 1995. Vuonna1996 käyttö yleistyi jonkin verran, ja vuosia 1997 ja 1998 voidaan Suomessa kutsua BSC:n läpimurtovuosiksi. Vastanneista yrityksistä 23,2 % ilmoitti käyttävänsä BSC:tä. Yrityksistä 14,8 % oli ottamassa sitä käyttöön, ja 19,2 % harkitsi käyttöönottamista. Yritykset olivat lähteneet BSC-projektiin mm. paremman ohjausjärjestelmän, toiminnan tehostamisen ja muutoksen aikaansaamisen toivossa. BSC-projektin onnistumisen tärkeimpinä tekijöinä pidettiin johdon sitoutumista hankkeeseen, mittariston kytkeytymistä strategiaan ja mittareiden selkeyttä. BSC:n nähtiin vaikuttaneen yrityksissä eniten liiketoiminnan kokonaisuuden ymmärtämiseen, strategian toteutumiseen ja ei-taloudellisten asioiden seurantaan. Yrityksissä olimuutettu toimintaa mm. niin, että se suuntautuisi enemmän asiakkaisiin ja tulevaisuuteen. Tulevaisuudessa BSC:llä uskottiin olevan suurimmat vaikutukset kokonaisvaltaiseen ja strategiseen johtamiseen sekä strategian toteutumisen seurantaan. Kyselytutkimuksen perusteella voitiin osoittaa, että suuret yritykset käyttävät BSC:tä enemmän kuin pienet yritykset. Myös alueellisia eroja on: pääkaupunkiseudulla BSC:tä käytetään enemmän kuin muualla maassa. Mitä kannattavammaksi kyselyyn vastaaja arvioi yrityksensä, sitä parempana se piti tässä tutkimuksessa kehitettyä BSC-projektimallia verrattuna Kaplanin ja Nortonin kehittämään BSC-projektimalliin. BSC-projekti on niin kokonaisvaltainen, että sen onnistuminen edellyttää koko henkilöstön osallistuvan siihen. Ylimmän johdon aito sitoutuminen on välttämätöntä, jotta BSC-projekti saa riittävästi resursseja. Projektissa visio jastrategiat puretaan käytännön toimiksi, joten ilman ylimmän johdon mukanaoloa projektilla ei ole asiakasta. Keskijohto ja henkilöstö toteuttavat laaditut strategiat, jolloin heidän panoksensa on erittäin merkittävä projektin onnistumiseksi. Henkilöstö pitää saada osallistumaan mittaristotyöhön, jotta he sitoutuisivat asetettuihin tavoitteisiin. Ellei henkilöstöä saada mukaan, mittaristo jää helposti ylimmän johdon työkaluksi. Tällöin strategian toteuttaminen koko organisaatiossa on hyvin työlästä, jopa mahdotonta. Mittariston pitää olla strategialähtöinen, eikä se saa olla liian monimutkainen. Mitä alemmalle tasolle organisaatiossamennään, sitä yksinkertaisempi mittariston pitää olla. Ylimmillä tasoilla mittareita voi olla kahdeksasta kahteentoista, mutta alemmilla tasoilla niitä on oltava hieman vähemmän. Projektin nopea läpivienti yrityksessä ei saa olla itsetarkoitus, mutta nopeasti saadut konkreettiset tulokset auttavat, että projekti saa resursseja ja mahdollistavat palautteen saamisen ja oppimisen. Kerralla ei BSC:täsaada täydellisesti toimivaksi, vaan se on oppimisprosessi, joka mahdollistaa syvällisemmän strategian toteuttamiseen. Tässä tutkimuksessa kehitetty BSC-projektin toteuttamismalli perustuu kymmenien asiantuntijoiden kokemuksiin ja näkemyksiin BSC-projektin toteuttamisesta. Kyselytutkimuksesta, työistunnosta ja Tulikivi-casesta saadut tulokset osoittavat, että kehitetyn mallin avulla yrityksillä on entistä paremmat mahdollisuudet saada BSC-projekti onnistumaan. Näin tutkimuksen päätavoite saavutettiin. Muut tavoitteet saavutettiin kyselytutkimuksen tulosten avulla.

Using music as a signal for biofeedback

Studies on the potential benefits of conveying biofeedback stimulus using a musical signal have appeared in recent years with the intent of harnessing the strong effects that music listening may have on subjects. While results are encouraging, the fundamental question has yet to be addressed, of how combined music and biofeedback compares to the already established use of either of these elements separately. This experiment, involving young adults (N = 24), compared the effectiveness at modulating participants' states of physiological arousal of each of the following conditions: A) listening to pre-recorded music, B) sonification biofeedback of the heart rate, and C) an algorithmically modulated musical feedback signal conveying the subject's heart rate. Our hypothesis was that each of the conditions (A), (B) and (C) would differ from the other two in the extent to which it enables participants to increase and decrease their state of physiological arousal, with (C) being more effective than (B), and both more than (A). Several physiological measures and qualitative responses were recorded and analyzed. Results show that using musical biofeedback allowed participants to modulate their state of physiological arousal at least equally well as sonification biofeedback, and much better than just listening to music, as reflected in their heart rate measurements, controlling for respiration-rate. Our findings indicate that the known effects of music in modulating arousal can therefore be beneficially harnessed when designing a biofeedback protocol.

Management Control for Corporate Sustainability Execution: The Role of Employee Compensation

The research described in this thesis examines the characteristics, the benefits and the challenges associated with the implementation of management accounting systems in the field of Corporate Social Responsibility (CSR). Applied to the CSR context, management accounting relates to the identification, elaboration and communication of information about an organization's interactions with the society and the environment. Based on this information, firms are able to make decisions to achieve social and environmental objectives and provide evidence justifying the benefits and the costs of such actions. The study begins by focusing on green management and exploring the characteristics of Environmental Management Accounting (EMA) systems within firms. The first chapter informs the reader about the growing body of EMA research and reveals unexplored relevant aspects that need to be further investigated. The work also emphasizes the importance of developing new theoretical hypotheses and appropriate research designs to empirically tackle new aspects of EMA and gain understanding on the use of these practices. Subsequently, given the acknowledged importance of control systems in influencing the behaviour of individuals within organizations, the remaining two chapters of the dissertation focus on the functioning of CSR-linked incentives assigned to employees in the form of compensation plans. The second chapter examines the determinants influencing corporate provision of incentives for the attainment of environmental targets. Empirical analysis of a sample of international firms reveals that companies are likely to use green incentives as mechanisms to increase the efficacy in contracting with their employees as well as to respond to social influences. Finally, the third chapter investigates the effectiveness of contracting associated with the use of CSR-linked executive compensation. Empirical analysis of a sample of US-based companies shows that corporate choice to tie senior executives' pay to CSR targets promotes the firm's CSR performance. Cette thèse examine les caractéristiques, avantages et défis associés à l'utilisation des systèmes de contrôle de gestion dans le domaine de la Responsabilité Sociale des Entreprises (RSE). Dans le contexte de la RSE, les activités du contrôle de gestion impliquent l'identification, l'élaboration et la communication d'informations qui concernent les interactions des organisations avec la société et l'environnement. Avec ces informations les entreprises sont en mesure de prendre des décisions visant à atteindre les objectifs sociaux et environnementaux de l'organisation et de documenter les bénéfices et coûts de ces actions. Dès le début, la thèse se concentre sur les caractéristiques des systèmes de contrôle de gestion environnementale au sein des entreprises. Le premier chapitre passe en revue la littérature existante et révèle des aspects inexplorés. Pour ce faire, le travail suggère le développement de nouvelles théories ainsi que l'utilisation de méthodes appropriées. Ces dernières doivent permettre d'aborder empiriquement de nouveaux aspects des systèmes de contrôle environnemental et faciliter la compréhension sur l'utilisation de ces pratiques. Considérant l'importance des systèmes de contrôle pour influencer le comportement des individus au sein des organisations, la suite du travail se concentre sur le fonctionnement des contrats de rémunération des employées liées aux résultats de la RSE. Plus particulièrement, le deuxième chapitre examine les facteurs qui influencent la décision des entreprises d'assigner des objectifs environnementaux aux employées. L'analyse empirique d'un échantillon d'entreprises internationales montre que les entreprises sont susceptibles d'utiliser des mécanismes incitatifs écologiques pour augmenter l'efficacité des contrats ainsi que pour répondre aux influences sociales. Finalement, le troisième chapitre analyse l'efficacité des contrats de rémunération des dirigeants liés aux résultats de la RSE. L'analyse empirique d'un échantillon de sociétés américaines indique que le choix de l'entreprise de lier la rémunération des dirigeants à des objectifs de la RSE favorise la performance RSE de l'organisation.

Model-based objects recognition in industrial environments for autonomous vehicles control

Behavior-based navigation of autonomous vehicles requires the recognition of the navigable areas and the potential obstacles. In this paper we describe a model-based objects recognition system which is part of an image interpretation system intended to assist the navigation of autonomous vehicles that operate in industrial environments. The recognition system integrates color, shape and texture information together with the location of the vanishing point. The recognition process starts from some prior scene knowledge, that is, a generic model of the expected scene and the potential objects. The recognition system constitutes an approach where different low-level vision techniques extract a multitude of image descriptors which are then analyzed using a rule-based reasoning system to interpret the image content. This system has been implemented using a rule-based cooperative expert system

The effects of real time control of welding parameters on weld quality in plasma arc keyhole welding

Joints intended for welding frequently show variations in geometry and position, for which it is unfortunately not possible to apply a single set of operating parameters to ensure constant quality. The cause of this difficulty lies in a number of factors, including inaccurate joint preparation and joint fit up, tack welds, as well as thermal distortion of the workpiece. In plasma arc keyhole welding of butt joints, deviations in the gap width may cause weld defects such as an incomplete weld bead, excessive penetration and burn through. Manual adjustment of welding parameters to compensate for variations in the gap width is very difficult, and unsatisfactory weld quality is often obtained. In this study a control system for plasma arc keyhole welding has been developed and used to study the effects of the real time control of welding parameters on gap tolerance during welding of austenitic stainless steel AISI 304L. The welding tests demonstrated the beneficial effect of real time control on weld quality. Compared with welding using constant parameters, the maximum tolerable gap width with an acceptable weld quality was 47% higher when using the real time controlled parameters for a plate thickness of 5 mm. In addition, burn through occurred with significantly larger gap widths when parameters were controlled in real time. Increased gap tolerance enables joints to be prepared and fit up less accurately, saving time and preparation costs for welding. In addition to the control system, a novel technique for back face monitoring is described in this study. The test results showed that the technique could be successfully applied for penetration monitoring when welding non magnetic materials. The results also imply that it is possible to measure the dimensions of the plasma efflux or weld root, and use this information in a feedback control system and, thus, maintain the required weld quality.

Characterization and Control Strategies of an Integrated Chemical-Biological System for the Remediation of Toxic Pollutants in Wastewater: A case of study

In a previous work, a hybrid system consisting of an advanced oxidation process (AOP) named Photo-Fenton (Ph-F) and a fixed bed biological treatment operating as a sequencing batch biofilm reactor (SBBR) was started-up and optimized to treat 200 mg·L-1 of 4-chlorophenol (4-CP) as a model compound. In this work, studies of reactor stability and control as well as microbial population determination by molecular biology techniques were carried out to further characterize and control the biological reactor. Results revealed that the integrated system was flexible and even able to overcome toxic shock loads. Oxygen uptake rate (OUR) in situ was shown to be a valid tool to control the SBBR operation, to detect toxic conditions to the biomass, and to assess the recovery of performance. A microbial characterization by 16S rDNA sequence analysis reveals that the biological population was varied, although about 30% of the bacteria belonged to the Wautersia genus.

Estudi i primera fase per la implementació del FOFB al Sincrotró ALBA

Aquest treball és la culminació de les pràctiques realitzades al sincrotró ALBA. Situat a Cerdanyola del Vallès, ALBA és un accelerador de 3a generació que permet emmagatzemar un feix d'electrons confinat de fins a 400 mA a 3GeV d'energia, amb l'objectiu d'obtenir llum a partir dels girs provocats al feix. Els sincrotrons moderns com el d'ALBA, el que pretenen és aconseguir un major control i estabilitat de la llum. Per aconseguir-ho, cal que el feix d'electrons que creen la llum estigui controlat al màxim i la seva òrbita sigui estable. Amb aquest objectiu els sincrotrons estant implementant sistemes de Fast Orbit FeedBack (FOFB) o sistemes realimentats de correcció ràpida de l'òrbita, per realitzar correccions d'almenys 100Hz que estabilitzin el feix d'electrons amb menys d'un 10% de l'amplada del feix (5-10μm). El treball exposa el desenvolupament d'una part del sistema de correcció ràpida de l'òrbita dels electrons (FOFB) que s'està duent a terme al sincrotró ALBA. Concretament, s’han revisat els estudis previs realitzats durant la fase de disseny del sincrotró, s’han recalculat funcions de transferència i retards de tots els elements involucrats al sistema. També s’han realitzat simulacions per confirmar la viabilitat del sistema amb les noves dades i finalment s’ha desenvolupat part de la unitat de control determinant el Hardware i s'ha adquirit dades que permetran analitzar el soroll de l'òrbita que en futurs treballs determinaran millor l'algorisme de la unitat de control.

Supersaturation-controlled crystallization

Identification of product requirements and quality, together with the management of production are key issues in chemical engineering. Quality control of crystalline products is part of the quality of many industrially manufactured products like paper, paintings, medicines and fertilizers. In most crystallization cases, quality is described with the size, polymorph, shape and purity of the crystal. The chemical composition, hydrodynamics and driving force, together with the operating temperature are in a key position when the properties of a crystalline product are controlled with the crystallization process. This study concentrates on managing the identified properties of a crystalline product with the control of a driving force. The controlling of the driving force can be based on the change of solubility or the change of concentration. Solubility can be changed with temperature, pressure and an antisolvent. The concentration of crystallizing compound, the solute can be changed with the evaporation of the solvent and with the addition of a reagent. The present study focuses on reagent addition and temperature change as methods of changing the level of the driving force. Three control structures for direct control of supersaturation are built, one for cooling crystallization and two for reactive crystallization. Closed loop feedback control structures are based on the measurement of the solute concentration with attenuated total reflection - Fourier transform infrared spectrometer. The details of the reagent feed are analyzed with experimental studies and with results of computational fluid dynamic simulations of the inert particle pulse in the premixer and inert particle injection to the mixing tank. Nucleation in conditions of controlled reactive crystallization is analyzed with Nielsen’s equation of homogeneous nucleation. The resulting control systems, based on regulation of supersaturation, can be used to produce the desired polymorph of an organic product. The polymorph composition of product crystals is controlled repeatably with the decision of a set value of supersaturation level.

Novel force control methods in a teleoperation system of a hydraulic slider

The objective of the this research project is to develop a novel force control scheme for the teleoperation of a hydraulically driven manipulator, and to implement an ideal transparent mapping between human and machine interaction, and machine and task environment interaction. This master‘s thesis provides a preparatory study for the present research project. The research is limited into a single degree of freedom hydraulic slider with 6-DOF Phantom haptic device. The key contribution of the thesis is to set up the experimental rig including electromechanical haptic device, hydraulic servo and 6-DOF force sensor. The slider is firstly tested as a position servo by using previously developed intelligent switching control algorithm. Subsequently the teleoperated system is set up and the preliminary experiments are carried out. In addition to development of the single DOF experimental set up, methods such as passivity control in teleoperation are reviewed. The thesis also contains review of modeling of the servo slider in particular reference to the servo valve. Markov Chain Monte Carlo method is utilized in developing the robustness of the model in presence of noise.

AMB system for high-speed motors using automatic commissioning

The general trend towards increasing e ciency and energy density drives the industry to high-speed technologies. Active Magnetic Bearings (AMBs) are one of the technologies that allow contactless support of a rotating body. Theoretically, there are no limitations on the rotational speed. The absence of friction, low maintenance cost, micrometer precision, and programmable sti ness have made AMBs a viable choice for highdemanding applications. Along with the advances in power electronics, such as signi cantly improved reliability and cost, AMB systems have gained a wide adoption in the industry. The AMB system is a complex, open-loop unstable system with multiple inputs and outputs. For normal operation, such a system requires a feedback control. To meet the high demands for performance and robustness, model-based control techniques should be applied. These techniques require an accurate plant model description and uncertainty estimations. The advanced control methods require more e ort at the commissioning stage. In this work, a methodology is developed for an automatic commissioning of a subcritical, rigid gas blower machine. The commissioning process includes open-loop tuning of separate parts such as sensors and actuators. The next step is to apply a system identi cation procedure to obtain a model for the controller synthesis. Finally, a robust model-based controller is synthesized and experimentally evaluated in the full operating range of the system. The commissioning procedure is developed by applying only the system components available and a priori knowledge without any additional hardware. Thus, the work provides an intelligent system with a self-diagnostics feature and an automatic commissioning.

Prediction of transients and control reactions in a transonic wind tunnel

This work describes a lumped parameter mathematical model for the prediction of transients in an aerodynamic circuit of a transonic wind tunnel. Control actions to properly handle those perturbations are also assessed. The tunnel circuit technology is up to date and incorporates a novel feature: high-enthalpy air injection to extend the tunnel’s Reynolds number capability. The model solves the equations of continuity, energy and momentum and defines density, internal energy and mass flow as the basic parameters in the aerodynamic study as well as Mach number, stagnation pressure and stagnation temperature, all referred to test section conditions, as the main control variables. The tunnel circuit response to control actions and the stability of the flow are numerically investigated. Initially, for validation purposes, the code was applied to the AWT ("Altitude Wind Tunnel" of NASA-Lewis). In the sequel, the Brazilian transonic wind tunnel was investigated, with all the main control systems modeled, including injection.