ESTABLISHMENT TECHNIQUES FOR TROPICAL LEGUMES IN THE UNDERSTORY OF A EUCALYPTUS PLANTATION

This study evaluated establishment methods for a mixture of herbaceous forage legumes [Centrosema acutifolium, Clitoria ternatea, Pueraria phaseoloides, Stylosanthes Campo Grande (Stylosanthes capitata + S. macrocephala), Calopogonium mucunoides, Lablab purpureus, Arachis pintoi, and Aeschynomene villosa] under the shade of an Eucalyptus grandis plantation submitted to thinning (40%) 8 years after planting in Anhembi, São Paulo (22°40'S, 48°10'W, altitude of 455 m). The experiment started in December 2008 and consisted of the comparison of the following four types of seed incorporation by light disc harrowing: (1) broadcast sowing without seed incorporation; disc harrowing before (2) or after (3) planting, and (4) disc harrowing before and after planting. Ninety days after planting, the number of legume plants/m2 and the percentage of ground cover by the plants varied between the treatments tested; however, the treatments had no effect on the dry matter accumulation of forage legumes. Disc harrowing before planting yielded superior results compared to the treatments without disc harrowing and disc harrowing after planting. At the end of the experimental period, the plots contained Arachis, Centrosema, Stylosanthes, and Pueraria. The dry matter accumulated by Centrosema corresponded to 73% of total dry matter yield of the plots. The participation of Arachis, Centrosema and Stylosanthes in final dry matter composition of the plots varied according to establishment method. The advantages of the use of species mixtures rather than monocultures in the understory of forest plantations were discussed.

ABOVEGROUND AND BELOWGROUND BIOMASS AND CARBON ESTIMATES FOR CLONAL EUCALYPTUS TREES IN SOUTHEAST BRAZIL

Eucalyptus plantations represent a short term and cost efficient alternative for sequestrating carbon dioxide from the atmosphere. Despite the known potential of forest plantations of fast growing species to store carbon in the biomass, there are relatively few studies including precise estimates of the amount of carbon in these plantations. In this study it was determined the carbon content in the stems, branches, leaves and roots of a clonal Eucalyptus grandis plantation in the Southeast of Brazil. We developed allometric equations to estimate the total amount of carbon and total biomass, and produced an estimate of the carbon stock in the stand level. Altogether, 23 sample trees were selected for aboveground biomass assessment. The roots of 9 of the 23 sampled trees were partially excavated to assess the belowground biomass at a singletree level. Two models with DBH, H and DBH2H were tested. The average relative share of carbon content in the stem, branch, leaf and root compartments was 44.6%, 43.0%, 46.1% and 37.8%, respectively, which is smaller than the generic value commonly used (50%). The best-fit allometric equations to estimate the total amount of carbon and total biomass had DBH2H as independent variable. The root-to-shoot ratio was relatively stable (C.V. = 27.5%) probably because the sub-sample was composed of clones. Total stand carbon stock in the Eucalyptus plantation was estimated to be 73.38 MgC ha-1, which is within the carbon stock range for Eucalyptus plantations.

The position effect of structural Eucalyptus round timber on the flexural modulus of elasticity

Round timber has great use in civil construction, performing the function of beams, columns, foundations, poles for power distribution among others, with the advantage of not being processed, such as lumber. The structural design of round timber requires determining the elastic properties, mainly the modulus of elasticity. The Brazilian standards responsible for the stiffness and strength determination of round timber are in effect for over twenty years with no technical review. Round timber, for generally present an axis with non-zero curvature according to the position of the element in the bending test, may exhibit different values of modulus of elasticity. This study aims to analyze the position effect of Eucalyptus grandis round timber on the flexural modulus of elasticity. The three-point bending test was evaluated in two different positions based on the longitudinal rotation of the round timber element. The results revealed that at least two different positions of the round timber element are desired to obtain significant modulus of elasticity.

Tolerance of eucalypt (Eucalyptus spp.) seedlings to imazapyr in nutritive solution

Imazapyr has presented excellent results in controlling coppices in stand reforms of eucalypt forests, despite differences in the efficacy levels. To find out whether these different responses are caused by the genetic variability of the cultivated materials, two experiments were carried out under greenhouse conditions with different imazapyr doses in a hydroponic system in plastic vases containing 2,500 mL solution. The clones IEF-1 (Eucalyptus grandis x Eucalyptus sp. hybrid), GE 463 (E. urophylla x E. grandis), and MN 445 (E. grandis x Eucalyptus sp. hybrid) were used in the first assay, and IEF-1, IEF2 (E. grandis x E. urophylla) x Eucalyptus sp. hybrid) and the clones 129 and 7182 (E. grandis x Eucalyptus sp. hybrids) in the second assay. Thirty days after transplanting the seedlings to a nutritive solution, imazapyr was applied to the solution at doses of 0.00, 0.05, 0.10, 0.20, 0.40, 0.80, 1.60 and 3.20 muL L-1. Clone GE 463 proved to be more tolerant to imazapyr than clones IEF-1 and MN 445 in the first assay; however, in the second, clone 7182 was the most tolerant. Thus, doses should also be differentiated when controlling coppices, according to the cultivated clone.

Glyphosate sobre a resistência à ferrugem (Puccinia psidii) do eucalipto

O glyphosate é o herbicida mais usado no controle de plantas daninhas em eucalipto, atuando diretamente na rota do ácido chiquímico, principal via de formação de compostos ligados aos mecanismos de defesa das plantas, como: lignina, ácido salicítico e fitoalexinas. Assim, o contato do glyphosate com as folhas do eucalipto pode levar a conseqüências importantes sobre a resistência a doenças. Objetivou-se neste estudo avaliar o envolvimento do glyphosate, via deriva, na severidade da ferrugem causada por Puccinia psidii em genótipos de eucalipto com diferentes níveis de resistência ao patógeno. Para isso, mudas de quatro clones - dois heterozigotos resistentes à ferrugem (UFV01 e UFV02) e dois homozigotos suscetíveis (UFV03 e UFV04) - foram submetidas às subdoses de 0 (testemunha); 28,8; 57,6; 86,4; e 115,2 g ha-1 de glyphosate, simulando deriva. Três dias após a aplicação do glyphosate, as plantas foram inoculadas com o isolado monopustular UFV1 de P. psidii, obtido de Eucalyptus grandis, na região de Itapetininga, SP. Aos 21 dias após a inoculação, foram avaliados a severidade de ferrugem, utilizando-se uma escala diagramática com quatro classes (S0 e S1 resistentes à ferrugem e S2 e S3 suscetíveis), o número de pústulas cm-2 de área foliar, a área foliar lesionada pela ferrugem, o número médio de urediniósporos cm-2 de área foliar, o número médio de urediniósporos/pústula e a porcentagem de intoxicação pelo glyphosate. O clone UFV04 foi o mais sensível ao glyphosate, enquanto o UFV01 apresentou maior tolerância ao herbicida. O glyphosate não alterou o nível de resistência à ferrugem nos genótipos resistentes (UFV01 e UFV02) que apresentaram ausência de pústulas nas folhas, tanto em plantas expostas à deriva quanto nas testemunhas. Para os demais clones, manteve-se a suscetibilidade à ferrugem, embora, com o aumento das doses de glyphosate, tenha se observado diminuição da severidade da doença. Conclui-se que o glyphosate não afetou a resistência do eucalipto a Puccinia psidii, ocorrendo diminuição da severidade da doença em plantas expostas ao glyphosate via deriva, e que existe tolerância diferencial entre os clones ao herbicida.

Isotermas de sorção de sementes de Eucaliptus grandis e Pinus taeda

As sementes florestais devem ser armazenadas adequadamente, a fim de reduzir ao mínimo o processo de deterioração. É possível estabelecer uma relação entre o teor de água livre na semente e sua conservação, expresso pela atividade de água, através da relação entre a pressão de vapor de água em equilíbrio sobre a semente e a pressão de vapor de água pura, à mesma temperatura. Uma isoterma é uma curva que descreve, em uma umidade específica, a relação de equilíbrio de uma quantidade de água sorvida por componentes da semente e a pressão de vapor ou umidade relativa, a uma temperatura específica. O objetivo deste trabalho foi estudar as isotermas de sorção para sementes de Eucalyptus grandis e Pinus taeda, que são espécies florestais de interesse econômico. Os graus de umidade das sementes foram ajustados, antes do armazenamento, usando-se dessecadores com sílica gel ou através de reidratação sobre água. Para o controle da quantidade de água removida ou absorvida, as subamostras foram pesadas periodicamente, sendo o processo encerrado ao ser atingido o peso correspondente ao grau de umidade final desejado para cada tratamento. Foram realizadas determinações de umidade e de atividade de água e utilizados diferentes modelos de equações empíricas que correlacionam dados experimentais das isotermas de sorção em materiais biológicos. O melhor ajuste das isotermas de sorção foi alcançado pelos modelos de três parâmetros de Langmuir e de quatro parâmetros de Peleg para sementes de E. grandis e de P. taeda, respectivamente.

The energy and water balance of a Eucalyptus plantation in southeast Brazil

The eddy covariance method was used to measure energy and water balance of a plantation of Eucalyptus (grandis x urophylla) hybrids over a 2 year period. The average daily evaporation rates were 5.4 (+/- 2.0) mm day(-1) in summer, but fell to 1.2 (+/- 0.3) mm day(-1) in winter. In contrast, the sensible heat flux was relatively low in summer but dominated the energy balance in winter. Evaporation accounted for 80% and 26% of the available energy, in summer and winter respectively. The annual evaporation was 82% (1124 mm) and 96% (1235 mm) of the annual rainfall recorded during the first and second year, respectively. Daily average canopy and aerodynamic conductance to water vapour were in the summer 51.9 (+/- 38.4) mm s(-1) 84.1 (+/- 25.6) mm s(-1), respectively; and in the winter 6.0 (+/- 10.5) mm s(-1) and 111.6 (+/- 24.6) mm s(-1), respectively. (C) 2010 Elsevier B.V. All rights reserved.

Photoacoustics as a tool for the diagnosis of radicular stress: Measurements in eucalyptus seedlings

In reforesting companies (cellulose industry), eucalyptus is usually cultivated in small plastic containers (50 mL). As seedlings remain for about 120 days in these containers-until transplantation-their roots become space restricted, with consequent limitations in water and nutrient absorption. These restrictions may lead to plant stress, decreasing productivity. In this work, we used the photoacoustic technique to evaluate the photosynthetic activity of Eucalyptus grandis, E. urophylla and E. urograndis seedlings subjected to this limited space availability, seeking a correlation with morphological parameters and fluorescence measurements in these seedlings. Photoacoustic, fluorescence, and morphological analysis were conducted every 15 days, from 45 to 120 days after sowing. Fluorescence and photosynthetic rate were evaluated in vivo and in situ, the latter one using the open photoacoustic technique. Data show that root dry matter diminished markedly at 90 and 120 days after sowing; this behavior showed a high correlation with the gas exchange component of the photoacoustic signal, as well as with the fluorescence ratio Fv/Fm. These results indicate that the soil volume of the container becomes insufficient for the roots after 90 days, probably leading to a nutritional deficiency in plants, which explains the decrease observed in the photosynthetic rate of seedlings. (C) 2003 American Institute of Physics.

Consequências da deriva de clomazone e sulfentrazone em clones de E. grandis x E. urophylla

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The position effect of structural Eucalyptus round timber on the flexural modulus of elasticity

A madeira roliça possui grande emprego nas construções civis, desempenhando a função de vigas, colunas, fundações, postes para distribuição de energia elétrica, entre outras, apresentando a vantagem de não ser processada, como é o caso da madeira serrada. O projeto envolvendo elementos roliços requer, além de outras variáveis estruturais, o conhecimento do módulo de elasticidade. No Brasil, os documentos normativos que tratam da determinação das propriedades de rigidez e resistência para peças roliças de madeira estão em vigência há mais de vinte anos sem revisão técnica. A madeira roliça, por geralmente possuir eixo com curvatura não nula, pode apresentar, segundo a posição da peça no ensaio de flexão, valores diferentes do módulo de elasticidade. Este trabalho tem como objetivo analisara influência da posição de peças roliças de madeira de Eucalyptus grandis na determinação do módulo de elasticidade na flexão. O ensaio de flexão utilizado é o de três pontos, sendo cada peça avaliada em duas posições distintas, definidas mediante o giro da seção transversal em torno do eixo. Os resultados encontrados indicam a necessidade do ensaio de flexão em, pelo menos, duas posições distintas da peça.

Physical and mechanical properties of thermally modified wood from E. grandis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparison of four trap types for ambrosia beetles (Coleoptera, Scolytidae) in Brazilian Eucalyptus stands

Eucalyptus spp. plantations represent >60% of the reforested area in Brazil. Although ambrosia beetle attacks on live trees were at first nonexistent, they have begun to appear with greater frequency. Monitoring for pest insects is a key factor in integrated pest management, and baited traps are one of the most widely used methods for insect population detection and survey. We compared the efficiency of the most widely used trap in Brazil to survey for ambrosia beetles and other Scolytidae, the ESALQ-84 type, with other traditionally employed traps: the multiple funnel (Lindgren trap); drainpipe; and slot (Theyson) traps, in a Eucalyptus grandis Hill ex Maiden stand in Brazil. The ESALQ-84 trap was the most efficient in trapping Hypothenemus eruditus Westwood and Hypothenemus obscurus (F.); the multiple funnel trap caught significantly more Cryptocarenus diadematus Eggers; whereas the slot trap caught more Premnobius cavipennis Eichhoff and Xyleborus affinis Eichhoff than the other traps. The drainpipe trap was the least effective trap overall. When corrected for number of beetles caught per trap surface area, catches were significantly higher on the ESALQ-84 trap for the majority of the species analyzed, probably because of a smaller trap surface area. The slot trap was recommended for it caught overall more beetles of the three most economically important scolytid species in eucalypt plantations in Brazil, P. cavipennis, X. affinis, and X, ferrugineus.

Selection of fungi for accelerated decay in stumps of Eucalyptus spp.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Can Eucalyptus invade native forest fragments close to commercial stands?

Some Eucalyptus species are widely used as a plantation crop in tropical and subtropical regions. One reason for this is the diversity of end uses, but the main reason is the high level of wood production obtained from commercial plantings. With the advancement of biotechnology it will be possible to expand the geographical area in which eucalypts can be used as commercial plantation crops, especially in regions with current climatic restrictions. Despite the popularity of eucalypts and their increasing range, questions still exist, in both traditional planting areas and in the new regions: Can eucalypts invade areas of native vegetation, causing damage to natural ecosystems biodiversity?The objective of this study it was to assess whether eucalypts can invade native vegetation fragments in proximity to commercial stands, and what factors promote this invasive growth. Thus, three experiments were established in forest fragments located in three different regions of Brazil. Each experiment was composed of 40 plots (1 m(2) each one), 20 plots located at the border between the forest fragment and eucalypts plantation, and 20 plots in the interior of the forest fragments. In each experimental site, the plots were paired by two soil exposure conditions, 10 plots in natural conditions and 10 plots with soil exposure (no plant and no litter). During the rainy season, 2 g of eucalypts seeds were sown in each plot, including Eucalyptus grandis or a hybrid of E. urophylla x E. grandis, the most common commercial eucalypt species planted in the three region. At 15, 30, 45, 90, 180, 270 and 360 days after sowing, we assessed the number of seedlings of eucalypts and the number of seedlings of native species resulting from natural regeneration. Fifteen days after sowing, the greatest number of eucalypts seedlings (37 m(-2)) was observed in the plots with lower luminosity and exposed soil. Also, for native species, it was observed that exposed soil improved natural germination reaching the highest number of 163 seedlings per square meter. Site and soil exposure were the factors that have the greatest influence on seed germination of both eucalypt and native species. However, 270 days after sowing, eucalypt seedlings were not observed at any of the three experimental sites. The result shows the inability of eucalypts to adapt to condition outside of their natural range. However, native species demonstrated their strong capacity for natural regeneration in forest fragments under the same conditions where eucalypts were seeded. (C) 2011 Elsevier B.V. All rights reserved.

Effect of acibenzolar-S-methyl and Saccharomyces cerevisiae on the activation of Eucalyptus defences against rust

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)