Influence of chitosan coating on protein-based nanohydrogels properties and in vitro gastric digestibility

Chitosan coating was applied in Lactoferrin (Lf)-Glycomacropeptide (GMP) nanohydrogels by layer-by-layer coating process. A volume ratio of 0.1 of Lf-GMP nanohydrogels (0.2 mg.mL-1, at pH 5.0) to chitosan (1 mg.mL-1, at pH 3) demonstrated to be the optimal condition to obtain stable nanohydrogels with size of 230 ± 12 nm, a PdI of 0.22 ± 0.02 and a -potential of 30.0 ± 0.15 mV. Transmission electron microscopy (TEM) images showed that the application of chitosan coating in Lf-GMP did not affect the spherical shape of nanohydrogels and confirmed the low aggregation of nanohydrogels in solution. The analysis of chemical interactions between chitosan and Lf-GMP nanohydrogels were performed by Fourier transform infrared spectroscopy (FTIR) and by circular dichroism (CD) that revealed that a specific chemical interaction occurring between functional groups of protein-based nanohydrogels and active groups of the chitosan was established. The effect of chitosan coating on release mechanisms of Lf-GMP nanohydrogels at acid conditions (pH 2, 37 ºC) was evaluated by the encapsulation of a model compound (caffeine) in these systems. Linear Superposition Model was used to fit the experimental data and revealed that Fick and relaxation mechanisms are involved in caffeine release. It was also observed that the Fick contribution increase with the application of chitosan coating. In vitro gastric digestion was performed with Lf-GMP nanohydrogels and Lf-GMP nanohydrogels with chitosan coating and it was observed that the presence of chitosan improve the stability of Lf and GMP (proteins were hydrolysed at a slower rate and were present in solution by longer time). Native electrophoreses revealed that the nanohydrogels without coating remained intact in solution until 15 min and with chitosan coating remained intact until 60 min, during gastric digestion.

Aromatic amines sources, environmental impact and remediation

Aromatic amines are widely used industrial chemicals as their major sources in the environment include several chemical industry sectors such as oil refining, synthetic polymers, dyes, adhesives, rubbers, perfume, pharmaceuticals, pesticides and explosives. They result also from diesel exhaust, combustion of wood chips and rubber and tobacco smoke. Some types of aromatic amines are generated during cooking, special grilled meat and fish, as well. The intensive use and production of these compounds explains its occurrence in the environment such as in air, water and soil, thereby creating a potential for human exposure. Since aromatic amines are potential carcinogenic and toxic agents, they constitute an important class of environmental pollutants of enormous concern, which efficient removal is a crucial task for researchers, so several methods have been investigated and applied. In this chapter the types and general properties of aromatic amine compounds are reviewed. As aromatic amines are continuously entering the environment from various sources and have been designated as high priority pollutants, their presence in the environment must be monitored at concentration levels lower than 30 mg L1, compatible with the limits allowed by the regulations. Consequently, most relevant analytical methods to detect the aromatic amines composition in environmental matrices, and for monitoring their degradation, are essential and will be presented. Those include Spectroscopy, namely UV/visible and Fourier Transform Infrared Spectroscopy (FTIR); Chromatography, in particular Thin Layer (TLC), High Performance Liquid (HPLC) and Gas chromatography (GC); Capillary electrophoresis (CE); Mass spectrometry (MS) and combination of different methods including GC-MS, HPLC-MS and CE-MS. Choosing the best methods depend on their availability, costs, detection limit and sample concentration, which sometimes need to be concentrate or pretreated. However, combined methods may give more complete results based on the complementary information. The environmental impact, toxicity and carcinogenicity of many aromatic amines have been reported and are emphasized in this chapter too. Lately, the conventional aromatic amines degradation and the alternative biodegradation processes are highlighted. Parameters affecting biodegradation, role of different electron acceptors in aerobic and anaerobic biodegradation and kinetics are discussed. Conventional processes including extraction, adsorption onto activated carbon, chemical oxidation, advanced oxidation, electrochemical techniques and irradiation suffer from drawbacks including high costs, formation of hazardous by-products and low efficiency. Biological processes, taking advantage of the naturally processes occurring in environment, have been developed and tested, proved as an economic, energy efficient and environmentally feasible alternative. Aerobic biodegradation is one of the most promising techniques for aromatic amines remediation, but has the drawback of aromatic amines autooxidation once they are exposed to oxygen, instead of their degradation. Higher costs, especially due to power consumption for aeration, can also limit its application. Anaerobic degradation technology is the novel path for treatment of a wide variety of aromatic amines, including industrial wastewater, and will be discussed. However, some are difficult to degrade under anaerobic conditions and, thus, other electron acceptors such as nitrate, iron, sulphate, manganese and carbonate have, alternatively, been tested.

Sensitive label-free electron chemical capacitive transducer signal for D-dimer electroanalyses

Supplementary data associated with this article can be found, in the online version, at: http://dx.doi.org/10.1016/j.electacta.2015.09.169.

Effect of different carbon materials as electron shuttles in the anaerobic biotransformation of nitroanilines

Aromatic amines resulted from azo dyes biotransformation under anaerobic conditions are generally recalcitrant to further anaerobic degradation. The catalytic effect of carbon materials (CM) on the reduction of azo dyes is known and has been confirmed in this work by increasing 3-fold the biological reduction rate of Mordant Yellow 1 (MY1). The resulting m-nitroaniline (m-NoA) was further degraded to m-phenylenediamine (m-Phe) only in the presence of CM. The use of CM to degraded anaerobically aromatic amines resulted from azo dye reduction was never reported before. In the sequence, we studied the effect of different CM on the bioreduction of o-, m- and p-NoA. Three microporous activated carbons with different surface chemistry, original (AC0), chemical oxidized with HNO3 (ACHNO3) and thermal treated (ACH2), and three mesoporous carbons, xerogels (CXA and CXB) and nanotubes (CNT) were assessed. In the absence of CM, NoA were only partially reduced to the corresponding Phe, whereas in the presence of CM, more than 90% was converted to the corresponding Phe. ACH2 and AC0 were the best electron shuttles, increasing the rates up to 8-fold. In 24h, the biological treatment of NoA and MY1 with AC0, decreased up to 88% the toxicity towards a methanogenic consortium, as compared to the non-treated solutions. This article is protected by copyright. All rights reserved

Production of whey protein-based aggregates under ohmic heating

Formation of whey protein isolate protein aggregates under the influence of moderate electric fields upon ohmic heating (OH) has been monitored through evaluation of molecular protein unfolding, loss of its solubility, and aggregation. To shed more light on the microstructure of the protein aggregates produced by OH, samples were assayed by transmission electron microscopy (TEM). Results show that during early steps of an OH thermal treatment, aggregation of whey proteins can be reduced with a concomitant reduction of the heating chargeby reducing the come-up time (CUT) needed to reach a target temperatureand increase of the electric field applied (from 6 to 12 V cm1). Exposure of reactive free thiol groups involved in molecular unfolding of -lactoglobulin (-lg) can be reduced from 10 to 20 %, when a CUT of 10 s is combined with an electric field of 12 V cm1. Kinetic and multivariate analysis evidenced that the presence of an electric field during heating contributes to a change in the amplitude of aggregation, as well as in the shape of the produced aggregates. TEM discloses the appearance of small fibrillar aggregates upon the influence of OH, which have recognized potential in the functionalization of food protein networks. This study demonstrated that OH technology can be used to tailor denaturation and aggregation behavior of whey proteins due to the presence of a constant electric field together with the ability to provide a very fast heating, thus overcoming heat transfer limitations that naturally occur during conventional thermal treatments.

A design of experiments to assess phosphorous removal and crystal properties in struvite precipitation of source separated urine using different Mg sources

Supplementary data associated with this article can be found, in the online version, at: http://dx.doi.org/10.1016/j.cej.2016.03.148.

Evaluation of the Medical Care of Patients with Hypertension in an Emergency Department and in Ambulatory Hypertension Unit

OBJECTIVE: To evaluate the characteristics of the patients receiving medical care in the Ambulatory of Hypertension of the Emergency Department, Division of Cardiology, and in the Emergency Unit of the Clinical Hospital of the Ribeirão Preto Medical School. METHODS: Using a protocol, we compared the care of the same hypertensive patients in on different occasions in the 2 different places. The characteristics of 62 patients, 29 men with a mean age of 57 years, were analyzed between January 1996 and December 1997. RESULTS: The care of these patients resulted in different medical treatment regardless of their clinical features and blood pressure levels. Thus, in the Emergency Unit, 97% presented with symptoms, and 64.5% received medication to rapidly reduce blood pressure. In 50% of the cases, nifedipine SL was the elected medication. Patients who applied to the Ambulatory of Hypertension presenting with similar features, or, in some cases, presenting with similar clinically higher levels of blood pressure, were not prescribed medication for a rapid reduction of blood pressure at any of the appointments. CONCLUSION: The therapeutic approach to patients with high blood pressure levels, symptomatic or asymptomatic, was dependent on the place of treatment. In the Emergency Unit, the conduct was, in the majority of cases, to decrease blood pressure immediately, whereas in the Ambulatory of Hypertension, the same levels of blood pressure, in the same individuals, resulted in therapeutic adjustment with nonpharmacological management. These results show the need to reconsider the concept of hypertensive crises and their therapeutical implications.

Retrospective Study of the Survival of Patients who Underwent Cardiopulmonary Resuscitation in an Intensive Care Unit

OBJECTIVE: To evaluate clinical and evolutive characteristics of patients admitted in an intensive care unit after cardiopulmonary resuscitation, identifying prognostic survival factors.METHODS: A retrospective study of 136 patients admitted between 1995 and 1999 to an intensive care unit, evaluating clinical conditions, mechanisms and causes of cardiopulmonary arrest, and their relation to hospital mortality.RESULTS: A 76% mortality rate independent of age and sex was observed. Asystole was the most frequent mechanism of death, and seen in isolation pulmonary arrest was the least frequent. Cardiac failure, need for mechanical ventilation, cirrhosis and previous stroke were clinically significant (p<0.01) death factors.CONCLUSION: Prognostic factors supplement the doctor's decision as to whether or not a patient will benefit from cardiopulmonary resuscitation.

BNP was Associated with Ischemic Myocardial Scintigraphy and Death in Patients at Chest Pain Unit

Background:Recent studies have suggested that B-type Natriuretic Peptide (BNP) is an important predictor of ischemia and death in patients with suspected acute coronary syndrome. Increased levels of BNP are seen after episodes of myocardial ischemia and may be related to future adverse events.Objectives:To determine the prognostic value of BNP for major cardiac events and to evaluate its association with ischemic myocardial perfusion scintigraphy (MPS).Methods:This study included retrospectively 125 patients admitted to the chest pain unit between 2002 and 2006, who had their BNP levels measured on admission and underwent CPM for risk stratification. BNP values were compared with the results of the MPS. The chi-square test was used for qualitative variables and the Student t test, for quantitative variables. Survival curves were adjusted using the Kaplan-Meier method and analyzed by using Cox regression. The significance level was 5%.Results:The mean age was 63.9 ± 13.8 years, and the male sex represented 51.2% of the sample. Ischemia was found in 44% of the MPS. The mean BNP level was higher in patients with ischemia compared to patients with non-ischemic MPS (188.3 ± 208.7 versus 131.8 ± 88.6; p = 0.003). A BNP level greater than 80 pg/mL was the strongest predictor of ischemia on MPS (sensitivity = 60%, specificity = 70%, accuracy = 66%, PPV = 61%, NPV = 70%), and could predict medium-term mortality (RR = 7.29, 95% CI: 0.90-58.6; p = 0.045) independently of the presence of ischemia.Conclusions:BNP levels are associated with ischemic MPS findings and adverse prognosis in patients presenting with acute chest pain to the emergency room, thus, providing important prognostic information for an unfavorable clinical outcome.

Electron Beam Welding In-Process Control and Monitoring

This work presents the results of an investigation of processes in the melting zone during Electron Beam Welding(EBW) through analysis of the secondary current in the plasma.The studies show that the spectrum of the secondary emission signal during steel welding has a pronounced periodic component at a frequency of around 15–25 kHz. The signal contains quasi-periodic sharp peaks (impulses). These impulses have stochastically varying amplitude and follow each other inseries, at random intervals between series. The impulses have a considerable current (up to 0.5 A). It was established that during electron-beam welding with the focal spot scanning these impulses follow each other almost periodically. It was shown that the probability of occurrence of these high-frequency perturbation increases with the concentration of energy in the interaction zone. The paper also presents hypotheses for the mechanism of the formation of the high-frequency oscillations in the secondary current signal in the plasma.

Some mites of Yemen collected by the Medical Mission of the United States Naval Medical Research Unit No.3. / Charles D. Radford.

v.34:no.28(1954)

Memòria: estada a London South Bank University (Regne Unit)

Investigación producida a partir de una estancia en la London South Bank University, Reino Unido, entre los meses de setiembre y diciembre del 2005. Se estudia el trabajo sexual en el Reino Unido desde tres perspectivas diferentes. Por una parte, se trata la historia del feminismo anglosajón respecto a sus visiones sobre la prostitución, desde una aproximación a las fuentes. Por otra parte, se plantea la situación jurídico-política. Finalmente, se presenta brevemente a las principales entidades que dan apoyo al colectivo de trabajadoras del sexo en la ciudad de Londres.

Weighted Hardy spaces for the unit disc: approximation properties

In this paper we study basic properties of the weighted Hardy space for the unit disc with the weight function satisfying Muckenhoupt's (Aq) condition, and study related approximation problems (expansion, moment and interpolation) with respect to two incomplete systems of holomorphic functions in this space.

Comparasion of polyacrylamide gel electrophoresis (PAGE), immuno-electron microscopy (IEM) and enzyme immunoassay (EIA) for the rapid diagnosis of rotavirus infection in children

Detection of rotavirus RNA by polyacrylamide gel electrophoresis (PAGE) proved to be a highly sensitive and rapid diagnostic test. A comparison of this assay with immuno-electron microscopy (IEM) and enzyme immunoassay (EIA) in 245 faeces from children with gastroenteritis revealed complete agreement between the three assays in 238 (97.14%) samples. Among 75 samples positive in at least one of the three assays, negative results were observed in 5 (6.48%) by PAGE, in 6 (6.76%) by EIA and in none by IEM. Silver staining greatly increased the sensitivity of the PAGE assay. We conclude that although IEM remains the most sensitive and rapid rotavirus diagnostic assay, the PAGE technique has many advantages in its favour, including the non-requirement of expensive equipment, the use of only chemically defined reagents and the capacity to distinguish virus subgroup and variants and to detect non-crossreactive rotaviruses which are missed in serological assays.