Growth And Characterization Of Te-Se System And Some Tei.I.Urioes

The physical properties of solid matter are basically influenced by the existence of lattice defects; as a result the study of crystal defects has assumed a central position in solid state physics and materials science. The study of dislocations ixa single crystals can yield a great deal of information on the mechanical properties of materials. In order to secure a full understanding of the processes taking place in semiconducting materials, it is important to investigate the microhardness of these materials-—the most reliable method of determining the fine structure of crystals, the revelation of micro—inhomogenities in the distribution of impurities, the effect of dislocation density on the mechanical properties of crystals etc. Basically electrical conductivity in single crystals is a defect controlled phenomenon and hence detailed investigation of the electrical properties of these materials is one of the best available methods for the study of defects in them. In the present thesis a series of detailed studies carried out in Te—Se system, Bi2Te3 and In2Te3 crystals using surface topographical, dislocation and microindentation analysis as well as electrical measurements are presented

Synthesis, Characterization and Applications of Hybrid Nanocomposites of TiO2 With Conducting Polymers

A nanocomposite is a multiphase solid material where one of the phases has one, two or three dimensions of less than 100 nanometers (nm), or structures having nano-scale repeat distances between the different phases that make up the material. In the broadest sense this definition can include porous media, colloids, gels and copolymers, but is more usually taken to mean the solid combination of a bulk matrix and nano-dimensional phase(s) differing in properties due to dissimilarities in structure and chemistry. The mechanical, electrical, thermal, optical, electrochemical, catalytic properties of the nanocomposite will differ markedly from that of the component materials. Size limits for these effects have been proposed, <5 nm for catalytic activity, <20 nm for making a hard magnetic material soft, <50 nm for refractive index changes, and <100 nm for achieving superparamagnetism, mechanical strengthening or restricting matrix dislocation movement. Conducting polymers have attracted much attention due to high electrical conductivity, ease of preparation, good environmental stability and wide variety of applications in light-emitting, biosensor chemical sensor, separation membrane and electronic devices. The most widely studied conducting polymers are polypyrrole, polyaniline, polythiophene etc. Conducting polymers provide tremendous scope for tuning of their electrical conductivity from semiconducting to metallic region by way of doping and are organic electro chromic materials with chemically active surface. But they are chemically very sensitive and have poor mechanical properties and thus possessing a processibility problem. Nanomaterial shows the presence of more sites for surface reactivity, they possess good mechanical properties and good dispersant too. Thus nanocomposites formed by combining conducting polymers and inorganic oxide nanoparticles possess the good properties of both the constituents and thus enhanced their utility. The properties of such type of nanocomposite are strongly depending on concentration of nanomaterials to be added. Conducting polymer composites is some suitable composition of a conducting polymer with one or more inorganic nanoparticles so that their desirable properties are combined successfully. The composites of core shell metal oxide particles-conducting polymer combine the electrical properties of the polymer shell and the magnetic, optical, electrical or catalytic characteristics of the metal oxide core, which could greatly widen their applicability in the fields of catalysis, electronics and optics. Moreover nanocomposite material composed of conducting polymers & oxides have open more field of application such as drug delivery, conductive paints, rechargeable batteries, toners in photocopying, smart windows, etc.The present work is mainly focussed on the synthesis, characterization and various application studies of conducting polymer modified TiO2 nanocomposites. The conclusions of the present work are outlined below, Mesoporous TiO2 was prepared by the cationic surfactant P123 assisted hydrothermal synthesis route and conducting polymer modified TiO2 nanocomposites were also prepared via the same technique. All the prepared systems show XRD pattern corresponding to anatase phase of TiO2, which means that there is no phase change occurring even after conducting polymer modification. Raman spectroscopy gives supporting evidence for the XRD results. It also confirms the incorporation of the polymer. The mesoporous nature and surface area of the prepared samples were analysed by N2 adsorption desorption studies and the mesoporous ordering can be confirmed by low angle XRD measurementThe morphology of the prepared samples was obtained from both SEM & TEM. The elemental analysis of the samples was performed by EDX analysisThe hybrid composite formation is confirmed by FT-IR spectroscopy and X-ray photoelectron spectroscopyAll the prepared samples have been used for the photocatalytic degradation of dyes, antibiotic, endocrine disruptors and some other organic pollutants. Photocatalytic antibacterial activity studies were also performed using the prepared systemsAll the prepared samples have been used for the photocatalytic degradation of dyes, antibiotic, endocrine disruptors and some other organic pollutants. Photocatalytic antibacterial activity studies were also performed using the prepared systems Polyaniline modified TiO2 nanocomposite systems were found to have good antibacterial activity. Thermal diffusivity studies of the polyaniline modified systems were carried out using thermal lens technique. It is observed that as the amount of polyaniline in the composite increases the thermal diffusivity also increases. The prepared systems can be used as an excellent coolant in various industrial purposes. Nonlinear optical properties (3rd order nonlinearity) of the polyaniline modified systems were studied using Z scan technique. The prepared materials can be used for optical limiting Applications. Lasing studies of polyaniline modified TiO2 systems were carried out and the studies reveal that TiO2 - Polyaniline composite is a potential dye laser gain medium.

Molecular Beam Epitaxial Growth of III-V Semiconductor Nanostructures on Silicon Substrates

The main focus and concerns of this PhD thesis is the growth of III-V semiconductor nanostructures (Quantum dots (QDs) and quantum dashes) on silicon substrates using molecular beam epitaxy (MBE) technique. The investigation of influence of the major growth parameters on their basic properties (density, geometry, composition, size etc.) and the systematic characterization of their structural and optical properties are the core of the research work. The monolithic integration of III-V optoelectronic devices with silicon electronic circuits could bring enormous prospect for the existing semiconductor technology. Our challenging approach is to combine the superior passive optical properties of silicon with the superior optical emission properties of III-V material by reducing the amount of III-V materials to the very limit of the active region. Different heteroepitaxial integration approaches have been investigated to overcome the materials issues between III-V and Si. However, this include the self-assembled growth of InAs and InGaAs QDs in silicon and GaAx matrices directly on flat silicon substrate, sitecontrolled growth of (GaAs/In0,15Ga0,85As/GaAs) QDs on pre-patterned Si substrate and the direct growth of GaP on Si using migration enhanced epitaxy (MEE) and MBE growth modes. An efficient ex-situ-buffered HF (BHF) and in-situ surface cleaning sequence based on atomic hydrogen (AH) cleaning at 500 °C combined with thermal oxide desorption within a temperature range of 700-900 °C has been established. The removal of oxide desorption was confirmed by semicircular streaky reflection high energy electron diffraction (RHEED) patterns indicating a 2D smooth surface construction prior to the MBE growth. The evolution of size, density and shape of the QDs are ex-situ characterized by atomic-force microscopy (AFM) and transmission electron microscopy (TEM). The InAs QDs density is strongly increased from 108 to 1011 cm-2 at V/III ratios in the range of 15-35 (beam equivalent pressure values). InAs QD formations are not observed at temperatures of 500 °C and above. Growth experiments on (111) substrates show orientation dependent QD formation behaviour. A significant shape and size transition with elongated InAs quantum dots and dashes has been observed on (111) orientation and at higher Indium-growth rate of 0.3 ML/s. The 2D strain mapping derived from high-resolution TEM of InAs QDs embedded in silicon matrix confirmed semi-coherent and fully relaxed QDs embedded in defectfree silicon matrix. The strain relaxation is released by dislocation loops exclusively localized along the InAs/Si interfaces and partial dislocations with stacking faults inside the InAs clusters. The site controlled growth of GaAs/In0,15Ga0,85As/GaAs nanostructures has been demonstrated for the first time with 1 μm spacing and very low nominal deposition thicknesses, directly on pre-patterned Si without the use of SiO2 mask. Thin planar GaP layer was successfully grown through migration enhanced epitaxy (MEE) to initiate a planar GaP wetting layer at the polar/non-polar interface, which work as a virtual GaP substrate, for the GaP-MBE subsequently growth on the GaP-MEE layer with total thickness of 50 nm. The best root mean square (RMS) roughness value was as good as 1.3 nm. However, these results are highly encouraging for the realization of III-V optical devices on silicon for potential applications.

Defects in Self Assembled Colloidal Crystals

Colloidal self assembly is an efficient method for making 3-D ordered nanostructures suitable for materials such as photonic crystals and macroscopic solids for catalysis and sensor applications. Colloidal crystals grown by convective methods exhibit defects on two different scales. Macro defects such as cracks and void bands originate from the dynamics of meniscus motion during colloidal crystal growth while micro defects like vacancies, dislocation and stacking faults are indigenous to the colloidal crystalline structure. This paper analyses the crystallography and energetics of the microscopic defects from the point of view of classical thermodynamics and discusses the strategy for the control of the macroscopic defects through optimization of the liquid-vapor interface.

The Effect of Periodic Silane Burst on the Properties of GaN on Si (111) Substrates

The periodic silane burst technique was employed during metalorganic chemical vapor deposition of epitaxial GaN on AlN buffer layers grown on Si (111). Periodic silicon delta doping during growth of both the AlN and GaN layers led to growth of GaN films with decreased tensile stresses and decreased threading dislocation densities, as well as films with improved quality as indicated by x-ray diffraction, micro-Raman spectroscopy, atomic force microscopy, and transmission electron microscopy. The possible mechanism of the reduction of tensile stress and the dislocation density is discussed in the paper.

Strained Silicon on Silicon by Wafer Bonding and Layer Transfer from Relaxed SiGe Buffer

We report the creation of strained silicon on silicon (SSOS) substrate technology. The method uses a relaxed SiGe buffer as a template for inducing tensile strain in a Si layer, which is then bonded to another Si handle wafer. The original Si wafer and the relaxed SiGe buffer are subsequently removed, thereby transferring a strained-Si layer directly to Si substrate without intermediate SiGe or oxide layers. Complete removal of Ge from the structure was confirmed by cross-sectional transmission electron microscopy as well as secondary ion mass spectrometry. A plan-view transmission electron microscopy study of the strained-Si/Si interface reveals that the lattice-mismatch between the layers is accommodated by an orthogonal array of edge dislocations. This misfit dislocation array, which forms upon bonding, is geometrically necessary and has an average spacing of approximately 40nm, in excellent agreement with established dislocation theory. To our knowledge, this is the first study of a chemically homogeneous, yet lattice-mismatched, interface.

Resultados en reducción abierta de cadera por via interna: necrosis avascular y concordancia interobservador

Introducción: la luxación típica de la cadera es una patología con alta incidencia, de ahí la necesidad de métodos efectivos para lograr una reducción de esta. Han surgido varios métodos de reducción, uno de estos métodos es la reducción abierta por vía interna. Metodología Estudió descriptivo retrospectivo, incluyo los casos operados de reducción abierta por vía interna en el Instituto de Ortopedia Infantil Roosevelt y Clínica Jorge Piñeros Corpas por uno de los tutores, desde enero de 2006 hasta junio de 2011, valorando estas caderas según los criterios de Salter de necrosis avascular (NAV), con un seguimiento mínimo de 18 meses. Se evaluó la concordancia interobservador para la clasificación de Salter en tres ortopedistas infantiles. Resultados Se evaluaron 20 caderas en 16 pacientes a los que se realizo reducción abierta de luxación típica de cadera por vía interna. El 40 % de las caderas presentaron NAV, el 75% de estas caderas presentan NAV tipo I según la clasificación de Kalamchi. El índice Kappa para la clasificación de Salter en tres ortopedistas infantiles fue 0.6. Discusión El abordaje por vía interna para la reducción de luxación de cadera típica en niños menores de 18 meses es una alternativa más para el manejo de estos pacientes, que puede producir NAV en la cadera, pero esta NAV es tipo I de Kalamchi en la mayoría de casos. La reproducibilidad de la radiografía para la evaluación de NAV, realizada por personas expertas es buena, medida con índice kappa de 0.6.

Tratamiento del deslizamiento epifisiario capital femoral con fijación in situ versus luxación quirúrgica

Introducción: El Deslizamiento Epifisiario Capital Femoral es la enfermedad de la cadera más común en adolescentes entre los 9 y 16 años. Es de causa idiopática, más frecuente en hombres, se clasifica en 4 estadios según criterios clínicos y radiológicos. Se buscó evaluar la evolución de los deslizamientos moderados y severos tratados con una de las dos técnicas propuestas. Metodología Se realizó un estudio descriptivo con pacientes que fueron llevados a fijación in situ o luxación controlada entre 2008 y 2011. Resultados: Se incluyeron 26 pacientes, los cuales el 65.4% se les realizó luxación quirúrgica controlada y el 34.6% fijación in situ. El 70,6% de pacientes tenían DECF inestable y 70,5% tenían desplazamiento severo. La evaluación de la escala WOMAC para dolor, rigidez y capacidad funcional encontró mejores beneficios para el grupo de fijación in situ, estadísticamente significativos (p<0,05), no solo en términos de dolor, rigidez y capacidad funcional sino menor frecuencia de complicaciones. Las complicaciones más frecuentes en el grupo de luxación quirúrgica controlada fueron un caso de infección, 7 casos (41,2%) de necrosis avascular de cabeza femoral, 5 casos (29,4%) de condrolisis y 2 casos (11,8%) de pseudoartrosis; En el grupo de fijación in situ, solo 1 (11,1%) presentó Infección del Sitio Operatorio y 1 (11,1%) Condrolisis. Resultados significativos solo para necrosis avascular. Discusión: Los pacientes con deslizamientos moderados y severos manejados con fijación in situ tuvieron una mejor resultado con menor proporción de complicaciones.

Caracterización radiológica de pacientes con osteotomía pélvica tipo Ganz

Se realizó un estudio descriptivo observacional para describir los hallazgos radiológicos pre y postoperatorios de pacientes llevados a osteotomía periacetabular tipo Ganz, según las medidas radiológicas del mismo autor, en el Instituto de Ortopedia infantil Roosevelt entre los años 2008 y 2012.

Performance indicators for the physical therapy program’s field academic programs at the Universidad del Rosario for 2004-2007.

Introducción: El programa de Fisioterapia de la Universidad del Rosario, en su responsabilidad social de generar un impacto positivo en la comunidad y en su propósito de formar profesionales, cuenta con los Programas Académicos de Campo (PAC) que se consideran una fuerte estrategia de extensión de la Universidad. Los PAC contribuyen a la adquisición de competencias para el desarrollo de procesos de acción-actuación-creación en los estudiantes para que resuelvan problemas en un espacio real de ejercicio profesional. Bajo esta perspectiva los PAC del programa de Fisioterapia muestran su comportamiento a través de la medición de indicadores de proceso y resultados propuestos desde el Programa con el fin de proveer información útil para la reorientación y permanente actualización de los contenidos programáticos en las asignaturas y en los mismos PAC. Materiales y métodos: En el siguiente artículo se presenta un análisis de los indicadores de demanda por género, régimen de Seguridad Social en Salud, procedimiento y morbilidad de los Programas Académicos de Campo Integral Pediátrico, Integral de Adultos y Rehabilitación cardíaca y/o pulmonar, con el fin de establecer las características de la población objeto de la prestación de los servicios y procurar información verificable que dé soporte para la construcción de procesos de cambio dentro de la dinámica de mejoramiento continuo que debe tener cualquier institución. Este seguimiento es útil para la toma de decisiones de planeación académica que contribuye a mejorar los procesos de planeación y a facilitar el cumplimiento de los propósitos de formación para cada práctica, y de esta manera ayuda a ser elemento de análisis para directivas, instructores y estudiantes en la orientación del proceso de gestión académico-administrativo, y a retroalimentar los procesos de planeación y programación académica. Resultados: Los resultados arrojados en el análisis de los datos de la morbilidad en los programas académicos de campo muestran el siguiente comportamiento durante los años 2004, 2005, 2006 y 2007. Conclusiones: En el PAC pediátrico la mayor incidencia es de asma con un 37,2% y la más baja incidencia es para luxación congénita de cadera y enfermedad mental de origen central con un 0,1%. El 58% de los usuarios es de género masculino, y el 81% del total pertenece al régimen contributivo. En la morbilidad del PAC de adultos la mayor incidencia es de EPOC, con un 23,2%, y la menor incidencia es de lumbalgia, con un 2,4%. La mayoría de usuarios atendidos (58%) son hombres, y el 58% de los usuarios pertenece al régimen contributivo. En el PAC de rehabilitación cardíaca y/o pulmonar la mayor incidencia fue de EPOC, con un 40%; seguido de neumonía, con 17%; y con una menor incidencia para asma, con un 2%. El 54% de los usuarios son hombres y el 91% del total pertenece al régimen subsidiado.

Endocarditis infecciosa por Staphylococcus Aureus Meticilino sensible y resistente en la Fundación Cardioinfantil – Instituto de Cardiología

Introducción y objetivos: La endocarditis infecciosa (EI) es una enfermedad grave producida por diversos gérmenes que afectan las válvulas cardiacas y el tejido endomiocárdico. El objetivo fue describir las características epidemiológicas, clínicas, ecocardiográficas y microbiológicas de la endocarditis infecciosa por Staphylococcus aureus (S. aureus) meticilino sensible y resistente de la Fundación Cardioinfantil – Instituto de Cardiología (FCI-IC) en el periodo de tiempo 2010- 2015. Métodos: Cohorte retrospectiva de casos de EI por S. aureus en la FCIIC para el período 2010-2015. Se realizó descripción de las variables generales de la población a estudio utilizando medidas de tendencia central y dispersión. Análisis de desenlaces teniendo cuenta la concentración inhibitoria mínima de vancomicina. Resultados: En el estudio se presentaron 27 casos de EI, con una mayor proporción de pacientes de sexo masculino, con hipertensión, diabetes y hemodiálisis. La fiebre fue la manifestación más frecuente seguida de fenómenos vasculares. La válvula más comprometida fue la mitral, principalmente nativa. Discusión: La presentación clínica de los pacientes con EI por S. aureus es aguda por lo que la fiebre es la principal manifestación clínica presentada, lo anterior favorece un rápido diagnóstico clínico. De las cepas de S. aureus causante de EI no se encontró gérmenes con sensibilidad intermedia ni resistente a la vancomicina según criterios establecidos por CLSI. Se encontró mayor proporción de pacientes con un valor de CMI para vancomicina mayor a 0,5μg/ml lo cual es importante dado que podemos estar enfrentándonos a cepas hetero VISA (hVISA).

Contrapuntos de la invención

Un instrumento musical implica la presencia de un registro sonoro que afecta tanto a la organización de los sonidos, silencios y ruidos, como a la disposición corporal que con él se va forjando. Desde esta consideración, la organización de la música llevada a cabo con las tecnologías eléctricas y electrónicas supone una profunda modificación de ambos aspectos. La llegada de la electricidad implica una triple dislocación: respecto a la transmisión de lo sonoro, a su posibilidad de reproducción y a la escucha. Estas dislocaciones son puestas en relación con invenciones que, desde el órgano de Ctesibios hasta el clavecín ocular de Castel, nos dibujan un marco en el que música, técnica, sensibilidad y sistema económico-social, tejen sus nexos. A lo largo de este recorrido se trazan lo que se ha denominado contrapuntos de la invención, que pueden tomar en las figuras de J.S. Bach y de J. Cage sus ejemplos más prominentes

Mapping the spatial distribution of geomorphological processes in the Okstindan area of northern Norway, using Geomorphic Process Units as derived from remote sensing and ground survey

The delineation of Geomorphic Process Units (GPUs) aims to quantify past, current and future geomorphological processes and the sediment flux associated with them. Five GPUs have been identified for the Okstindan area of northern Norway and these were derived from the combination of Landsat satellite imagery (TM and ETM+) with stereo aerial photographs (used to construct a Digital Elevation Model) and ground survey. The Okstindan study area is sub-arctic and mountainous and is dominated by glacial and periglacial processes. The GPUs exclude the glacial system (some 37% of the study area) and hence they are focussed upon periglacial and colluvial processes. The identified GPUs are: 1. solifluction and rill erosion; 2. talus creep, slope wash and rill erosion; 3. accumulation of debris by rock and boulder fall; 4. rockwalls; and 5. stable ground with dissolved transport. The GPUs have been applied to a ‘test site’ within the study area in order to illustrate their potential for mapping the spatial distribution of geomorphological processes. The test site within the study area is a catchment which is representative of the range of geomorphological processes identified.

Mechanical effects of plant cell wall enzymes on xyloglucan/cellulose composites

Xyloglucan-acting enzymes are believed to have effects on type I primary plant cell wall mechanical properties. In order to get a better understanding of these effects, a range of enzymes with different in vitro modes of action were tested against cell wall analogues (bio-composite materials based on Acetobacter xylinus cellulose and xyloglucan). Tomato pericarp xyloglucan endo transglycosylase (tXET) and nasturtium seed xyloglucanase (nXGase) were produced heterologously in Pichia pastoris. Their action against the cell wall analogues was compared with that of a commercial preparation of Trichoderma endo-glucanase (EndoGase). Both 'hydrolytic' enzymes (nXGase and EndoGase) were able to depolymerise not only the cross-link xyloglucan fraction but also the surface-bound fraction. Consequent major changes in cellulose fibril architecture were observed. In mechanical terms, removal of xyloglucan cross-links from composites resulted in increased stiffness (at high strain) and decreased visco-elasticity with similar extensibility. On the other hand, true transglycosylase activity (tXET) did not affect the cellulose/xyloglucan ratio. No change in composite stiffness or extensibility resulted, but a significant increase in creep behaviour was observed in the presence of active tXET. These results provide direct in vitro evidence for the involvement of cell wall xyloglucan-specific enzymes in mechanical changes underlying plant cell wall re-modelling and growth processes. Mechanical consequences of tXET action are shown to be complimentary to those of cucumber expansin.

Rate-dependent fracture toughness of polycrystalline ice

A series of three-point bend tests using single edge notched testpieces of pure polycrystalline ice have been performed at three different temperatures (–20°C, –30°C and –40°C). The displacement rate was varied from 1 mm/min to 100 mm/min, producing the crack tip strain rates from about 10–3 to 10–1 s–1. The results show that (a) the fracture toughness of pure polycrystalline ice given by the critical stress intensity factor (K IC) is much lower than that measured from the J—integral under identical conditions; (b) from the determination of K IC, the fracture toughness of pure polycrystalline ice decreases with increasing strain rate and there is good power law relationship between them; (c) from the measurement of the J—integral, a different tendency was appeared: when the crack tip strain rate exceeds a critical value of 6 × 10–3 s–1, the fracture toughness is almost constant but when the crack tip strain rate is less than this value, the fracture toughness increases with decreasing crack tip strain rate. Re-examination of the mechanisms of rate-dependent fracture toughness of pure polycrystalline ice shows that the effect of strain rate is related not only to the blunting of crack tips due to plasticity, creep and stress relaxation but also to the nucleation and growth of microcracks in the specimen.