Pain, Disability, and Art: A Response to Verpaelst

Réponse à - travail créatif / Response to - Creative work

Process Monitoring and Defect Detection of Additive Manufacturing Using Inline Coherent Imaging

With applications ranging from aerospace to biomedicine, additive manufacturing (AM) has been revolutionizing the manufacturing industry. The ability of additive techniques, such as selective laser melting (SLM), to create fully functional, geometrically complex, and unique parts out of high strength materials is of great interest. Unfortunately, despite numerous advantages afforded by this technology, its widespread adoption is hindered by a lack of on-line, real time feedback control and quality assurance techniques. In this thesis, inline coherent imaging (ICI), a broadband, spatially coherent imaging technique, is used to observe the SLM process in 15 - 45 $\mu m$ 316L stainless steel. Imaging of both single and multilayer builds is performed at a rate of 200 $kHz$, with a resolution of tens of microns, and a high dynamic range rendering it impervious to blinding from the process beam. This allows imaging before, during, and after laser processing to observe changes in the morphology and stability of the melt. Galvanometer-based scanning of the imaging beam relative to the process beam during the creation of single tracks is used to gain a unique perspective of the SLM process that has been so far unobservable by other monitoring techniques. Single track processing is also used to investigate the possibility of a preliminary feedback control parameter based on the process beam power, through imaging with both coaxial and 100 $\mu m$ offset alignment with respect to the process beam. The 100 $\mu m$ offset improved imaging by increasing the number of bright A-lines (i.e. with signal greater than the 10 $dB$ noise floor) by 300\%. The overlap between adjacent tracks in a single layer is imaged to detect characteristic fault signatures. Full multilayer builds are carried out and the resultant ICI images are used to detect defects in the finished part and improve upon the initial design of the build system. Damage to the recoater blade is assessed using powder layer scans acquired during a 3D build. The ability of ICI to monitor SLM processes at such high rates with high resolution offers extraordinary potential for future advances in on-line feedback control of additive manufacturing.

Advanced Business Simulations-Incorporating business and process execution data

Key Performance Indicators (KPIs) and their predictions are widely used by the enterprises for informed decision making. Nevertheless , a very important factor, which is generally overlooked, is that the top level strategic KPIs are actually driven by the operational level business processes. These two domains are, however, mostly segregated and analysed in silos with different Business Intelligence solutions. In this paper, we are proposing an approach for advanced Business Simulations, which converges the two domains by utilising process execution & business data, and concepts from Business Dynamics (BD) and Business Ontologies, to promote better system understanding and detailed KPI predictions. Our approach incorporates the automated creation of Causal Loop Diagrams, thus empowering the analyst to critically examine the complex dependencies hidden in the massive amounts of available enterprise data. We have further evaluated our proposed approach in the context of a retail use-case that involved verification of the automatically generated causal models by a domain expert.

A Data Driven Tool supported CLD Creation Approach

The creation of Causal Loop Diagrams (CLDs) is a major phase in the System Dynamics (SD) life-cycle, since the created CLDs express dependencies and feedback in the system under study, as well as, guide modellers in building meaningful simulation models. The cre-ation of CLDs is still subject to the modeller's domain expertise (mental model) and her ability to abstract the system, because of the strong de-pendency on semantic knowledge. Since the beginning of SD, available system data sources (written and numerical models) have always been sparsely available, very limited and imperfect and thus of little benefit to the whole modelling process. However, in recent years, we have seen an explosion in generated data, especially in all business related domains that are analysed via Business Dynamics (BD). In this paper, we intro-duce a systematic tool supported CLD creation approach, which analyses and utilises available disparate data sources within the business domain. We demonstrate the application of our methodology on a given business use-case and evaluate the resulting CLD. Finally, we propose directions for future research to further push the automation in the CLD creation and increase confidence in the generated CLDs.

Intelligent DMU creation: Nominal CAD model preparation for automated tolerance allocation

This paper examines the integration of a tolerance design process within the Computer-Aided Design (CAD) environment having identified the potential to create an intelligent Digital Mock-Up [1]. The tolerancing process is complex in nature and as such reliance on Computer-Aided Tolerancing (CAT) software and domain experts can create a disconnect between the design and manufacturing disciplines It is necessary to implement the tolerance design procedure at the earliest opportunity to integrate both disciplines and to reduce workload in tolerance analysis and allocation at critical stages in product development when production is imminent.
The work seeks to develop a methodology that will allow for a preliminary tolerance allocation procedure within CAD. An approach to tolerance allocation based on sensitivity analysis is implemented on a simple assembly to review its contribution to an intelligent DMU. The procedure is developed using Python scripting for CATIA V5, with analysis results aligning with those in literature. A review of its implementation and requirements is presented.

Parading through the Peace Process:Anthropology, Governance and Crisis in Northern Ireland

Because the authors both did work on the North Ireland parades, they became integrally involved as fieldworking anthropologists in the monitoring of these events, and in the creation of policy for their management. They detail how they worked with individuals and groups at every level, from protestors on the street up to the Secretary of State for the region. Later funded to examine legal and policing approaches to protests in other countries, especially South Africa, they show how they used this comparative knowledge to urge the implementation of measures which appear to have led to a diminution of violence in the parades. Finally, they assess their own contribution to the peace process in terms of contingency, timing, luck, flexibility, and industry.

Value creation in a reregulated market : Divestments, firms and dynamic processes

This thesis makes use of the unique reregulation of pharmaceutical monopoly in Sweden to critically examine intraindustry firm heterogeneity. It contributes to existing divestiture research as it studies the dynamism in between reconfigurations of value constellations and its effects on value creation of divested pharmacies. Because the findings showed that the predominant theory of intraindustry firm heterogeneity could not explain firm performance, the value constellation concept was applied as it captured the phenomena. A patterned finding informed how reconfigurations of value constellations in a reregulated market characterized by strict rules, regulations, and high competition did not generate additional value for firms on short term. My study unveils that value creation is hampered in situations where rules and regulations significantly affect firms’ ability to reconfigure their value constellations. The key practical implication is an alternative perspective on fundamental aspects of the reregulation and how policy-makers may impede firm performance and the intended creation of new value for not only firms but for society as a whole.

The Broader Impact of Disability Research: Aligning Public Policy with the Experiences of People with Disabilities and Healthcare Providers

Thesis (Ph.D.)--University of Washington, 2016-07

Institutional entrepreneurship and techniques of inclusiveness in the creation of the Intergovernmental Platform on Biodiversity and Ecosystem Services

This article contributes to understanding the conditions of social-ecological change by focusing on the agency of individuals in the pathways to institutionalization. Drawing on the case of the Intergovernmental Platform on Biodiversity and Ecosystem Services (IPBES), it addresses institutional entrepreneurship in an emerging environmental science-policy institution (ESPI) at a global scale. Drawing on ethnographic observations, semistructured interviews, and document analysis, we propose a detailed chronology of the genesis of the IPBES before focusing on the final phase of the negotiations toward the creation of the institution. We analyze the techniques and skills deployed by the chairman during the conference to handle the tensions at play both to prevent participants from deserting the negotiations arena and to prevent a lack of inclusiveness from discrediting the future institution. We stress that creating a new global environmental institution requires the situated exercise of an art of “having everybody on board” through techniques of inclusiveness that we characterize. Our results emphazise the major challenge of handling the fragmentation and plasticity of the groups of interest involved in the institutionalization process, thus adding to the theory of transformative agency of institutional entrepreneurs. Although inclusiveness might remain partly unattainable, such techniques of inclusiveness appear to be a major condition of the legitimacy and success of the institutionalization of a new global ESPI. Our results also add to the literature on boundary making within ESPIs by emphasizing the multiplicity and plasticity of the groups actually at stake.

The Multi-Faceted Experience of Empathy in Intellectual Disability Settings: An IPA Study

This research thesis explored the concept of empathy. The specific purpose was to further understand the idea of empathy in relation to the experience of male support workers who provide residential care to adults with intellectual disabilities (ID) and challenging behaviour. The thesis aimed to provide some insights into how support workers develop and extract meaning from their experiences of relationships with clients and the impact of this on their own self-care, namely, self-compassion. Since personal accounts of experience were required, a qualitative methodology was employed, Interpretative Phenomenological Analysis (IPA) (Smith, 2004). This methodology was selected as it allows for the exploration and interpretation of idiographic lived experience and meaning making. 8 experienced support workers were interviewed using a semi structured interview. Four superordinate themes emerged from the data. These included: 1. Making sense of the others inner world; 2. Processes that enhance empathic practice; 3. Tensions and conflicts, and 4. Management of distressing feelings. Differing accounts of interpreting the needs of clients were identified which helped participants understand, make sense of their interpersonal experience and participate in their role. These included utilising academic knowledge and senses, particularly sight and hearing, which were seemingly complemented by a level of reflective practice. Additionally, to make sense of the experience of a client, they appeared to put themselves in their position, suggesting a form of empathy. Participants appeared to engage in a process of reflection on their relationships with clients, which helped them think about what they had learned about the person’s needs, moreover, this process enabled them to identify some of their own responses and feelings. However, participants seemed to struggle to recognise the occurrence or impact of distressing emotional experience and to express their feelings, possibly in response to a deep sense of responsibility and fear of transferring emotional distress to others. This dilemma of holding two potentially conflicting views of experience seemed to inhibit self-compassion. Although not specifically testing theories of empathy, from the overall findings, it could be suggested that empathy may be a dynamic, transient process that is influenced by reflexivity, values and context. The context in which participants discussed their practice, and situated within their accounts, suggested a sense of confusion and uncertainty. Consequently, it is suggested this impacted on how participants understood and related to clients, and to themselves. There were some specific implications for Counselling Psychology practice, mostly concerning training and supervision. These included recommendations for staff training and supervision, systemic organisational intervention, policy development, recommendations for revisions to models of specialist care frameworks and clinical training.

Skapandet av ett webbaserat ärendehanteringssystem för affärssystemet Pyramid med Scrum : Creation of a web based case management system for the business system Pyramid with Scrum

The business system known as Pyramid does today not provide its user with a reasonable system regarding case management for support issues. The current system in place requires the customer to contact its provider via telephone to register new cases. In addition to this, current system doesn’t include any way for the user to view any of their current cases without contacting the provider.A solution to this issue is to migrate the current case management system from a telephone contact to a web based platform, where customers could easier access their current cases, but also directly through the website create new cases. This new system would reduce the time required to manually manage each individual case, for both customer and provider, resulting in an overall reduction in cost for both parties.The result is a system divided into two different sections, the first one is an API created in Pyramid that acts as a web service, and the second one a website which customers can connect to. The website will allow users to overview their current cases, but also the option to create new cases directly through the site. All the information used to the website is obtained through the web service inside Pyramid. Analyzing the final design of the system, the developers where able to conclude both positive and negative aspects of the systems’ final design. If the platform chosen was the optimal choice or not, and also what can be include if the system is further developed, will be discussed.The development process and the method used during development will also be analyzed and discussed, what positive and negative aspects that where encountered. In addition to this the cause and effect of a development team smaller than the suggested size will also be analyzed. Lastly an analysis of actions that could’ve been made in order to prevent certain issues from occurring will.

Relating Innovative 2D Ideas into 3D Garments in Terms of Structure, Using ‘Sculptural Form Giving’ as an Intermediate Step in Creation.

This research focuses on finding a fashion design methodology to reliably translate innovative two-dimensional ideas on paper, via a structural design sculpture, into an intermediate model. The author, both as a fashion designer and a researcher, has witnessed the issues which arise, regarding the loss of some of the initial ideas and distortion during the two-dimensional creative sketch to three-dimensional garment transfer process. Therefore, this research is concerned with fashion designers engaged in transferring a two-dimensional sketch through the method ‘sculptural form giving’. This research method applies the ideal model of conceptual sculpture, in the fashion design process, akin to those used in the disciplines of architecture. These parallel design disciplines share similar processes for realizing design ideas. Moreover, this research investigates and formalizes the processes that utilize the measurable space between the garment and the body, to help transfer garment variation and scale. In summation, this research proposition focuses on helping fashion designers to produce a creative method that helps the designer transfer their imaginative concept through intermediate modeling.

TIMESCAPES: an architectural process of memory and adaptation

What if the architectural process of making could incorporate time? All designers who impact the physical environment- consciously and unconsciously are gatekeepers of the past, commentators of the present, and speculators of the future. This project proposes the creation of architecture and adaptive public space that looks to historical memories, foster present day cultural formation, and new alternative visions for the city of the future. The thesis asks what it means to design for stasis and change in a variety of scales- urban, architectural, and detail and arrives at a speculated new neighborhood, institutional buildings, and landscape. Central to this project is the idea of the architect as archeologist, anthropologist, and artist. The project focuses on a rapidly changing part of the city of Fort Worth, Texas and assigns a multipurpose institutional buildings and public space as a method of investigation. The thesis hopes to further architectural discourse about into the role of architecture in the preservation of memory, adaptive potential of public spaces, and the role of time in architecture.

Building bridges between user and designer: co-creation, immersion and perspective taking

Designing for users rather than with users is still a common practice in technology design and innovation as opposed to taking them on board in the process. Design for inclusion aims to define and understand end-users, their needs, context of use, and, by doing so, ensure that end-users are catered for and included, while the results are geared towards universality of use. We describe the central role of end-user and designer participation, immersion and perspective to build user-driven solutions. These approaches provided a critical understanding of the counterpart role. Designer(s) could understand what the user’s needs were, experience physical impairments, and see from other’s perspective the interaction with the environment. Users could understand challenges of designing for physical impairments, build a sense of ownership with technology and explore it from a creative perspective. The understanding of the peer’s role (user and designer), needs and perspective enhanced user participation and inclusion.

Towards participatory political theology: democratic consolidation in Southeastern Europe and the role of Eastern Christianity in the process

This thesis defends the position that the Eastern Orthodoxy has the potential to develop, on the basis of its core concepts and doctrines, a new political theology that is participatory, personalist and universalist. This participatory political theology, as I name it, endorses modern democracy and the values of civic engagement. It enhances the process of democracy-building and consolidation in the SEE countries through cultivating the ethos of participation and concern with the common good among and the recognition of the dignity and freedom of the person. This political-theological model is developed while analyzing critically the traditional models of church-state relations (the symphonia model corresponding to the medieval empire and the Christian nation model corresponding to the nation-state) as being instrumentalized to serve the political goals of non-democratic regimes. The participatory political-theological model is seen as corresponding to the conditions of the constitutional democratic state. The research is justified by the fact the Eastern Orthodoxy has been a dominant religiouscultural force in the European South East for centuries, thus playing a significant role in the process of creation of the medieval and modern statehood of the SEE countries. The analysis employs comparative constitutional perspectives on democratic transition and consolidation in the SEE region with the theoretical approaches of political theology and Eastern Orthodox theology. The conceptual basis for the political-theological synthesis is found in the concept and doctrines of the Eastern Orthodoxy (theosis and synergy, ecclesia and Eucharist, conciliarity and catholicity, economy and eschatology) which emphasize the participatory, personalist and communal dimensions of the Orthodox faith and practice. The paradigms of revealing the political-theological potential of these concepts are the Eucharistic ecclesiology and the concept of divine-human communion as defining the body of Orthodox theology. The thesis argues that with its ethos of openness and engagement the participatory political theology presupposes political systems that are democratic, inclusive, and participatory, respecting the rights and the dignity of the person. The political theology developed here calls for a transformation and change of democratic systems towards better realization of their personalist and participatory commitments. In the context of the SEE countries the participatory political theology addresses the challenges posed by alternative authoritarian political theologies practiced in neighboring regions.