Digital radiography detectors: a technical overview

Developments in digital detector technologies have been taking place and new digital technologies are available for clinical practice. This chapter is intended to give a technical state-of-the-art overview about computed radiography (CR) and digital radiography (DR) detectors. CR systems use storage-phosphor image plates with a separate image readout process and DR technology converts X-rays into electrical charges by means of a readout process using TFT arrays. Digital detectors offer several advantages when compared to analogue detectors. The knowledge about digital detector technology for use in plain radiograph examinations is thus a fundamental topic to be acquired by radiology professionals and students. In this chapter an overview of digital radiography systems (both CR and DR) currently available for clinical practice is provided.

Digital radiography detector performance

The characterization of physical properties of digital imaging systems requires the determination and measurement of detectors’ physical performance. Those measures such as modulation transfer function (MTF), noise power spectra (NPS), and detective quantum efficiency (DQE) provide objective evaluations of digital detectors’ performance. To provide an MTF, NPS, and DQE calculation from raw-data images it is necessary to implement a method that is undertaken by two major steps: (1) image acquisition and (2) quantitative measure determination method. In this chapter a comprehensive description about a method to provide the measure of performance of digital radiography detectors is provided.

Technical considerations concerning digital technologies

This chapter addresses technical issues concerning digital technologies. Radiological equipment and technique are briefly introduced together with a discussion about requirements and advantages of digital technologies. Digital technologies offer several advantages when compared to conventional analogical systems, or screen–film (SF) systems. While in clinical practice the practitioners should be aware of technical factors such as image acquisition, management of patient dose, and diagnostic image quality. Thus, digital technologies require an up-to-date scientific knowledge concerning their use in projection radiography. In this chapter, technical considerations concerning digital technologies are provided.

Assessment of patient dose in digital systems

The assessment of patient dose has gained increased attention, still being an issue of concern that arises from the use of digital systems. The development of digital technology offers the possibility for a reduction of radiation dose around 50% without loss in image quality when compared to a conventional screen–film system. Digital systems give an equivalent or superior diagnostic performance and also several other advantages, but the risk of overexposure with no adverse effect on image quality could be present. This chapter refers to the management of patient dose and provides an explanation of dose-related concepts. In this chapter, exposure influence in dose and image representation and the effects of radiation exposure are also discussed.

Practical insights into digital radiology

Digital radiography detectors—based on different technological solutions—are currently available for clinical applications and widespread in clinical practice. Computed radiography (CR) and digital radiology systems have been available for clinical applications and the trend over the last few years has become digital. Radiology departments have been changing from traditional screen–film technology to digital technology. This chapter is intended to give the reader a practical understanding about the key aspects concerning digital systems, related to the performance of different technologies, image quality, and dose and patient safety/protection. The discussion around an optimization framework for digital systems is provided.

Image enhancement for digital radiography

Once in a digital form, a radiographic image may be processed in several ways in order to turn the visualization an act of improved diagnostic value. Practitioners should be aware that, depending on each clinical context, digital image processing techniques are available to help to unveil visual information that is, in fact, carried by the bare digital radiograph and may be otherwise neglected. The range of visual enhancement procedures includes simple techniques that deal with the usual brightness and contrast manipulation up to much more elaborate multi-scale processing that provides customized control over the emphasis given to the relevant finer anatomical details. This chapter is intended to give the reader a practical understanding of image enhancement techniques that might be helpful to improve the visual quality of the digital radiographs and thus to contribute to a more reliable and assertive reporting.

MASDSheGATS – Scheduling System for Dynamic Manufacturing Environments

This chapter addresses the resolution of scheduling in manufacturing systems subject to perturbations. The planning of Manufacturing Systems involves frequently the resolution of a huge amount and variety of combinatorial optimisation problems with an important impact on the performance of manufacturing organisations. Examples of those problems are the sequencing and scheduling problems in manufacturing management, routing and transportation, layout design and timetabling problems.

O desafio do digital no século XXI: a análise à estratégia de Comunicação da Presidência da República

Temos assistido, especialmente ao longo dos últimos dois anos,a um progressivo aumento da utilização das redes sociais por parte da Presidência da República Portuguesa, com destaque para o Facebook. Tal repete a tendência registada a nível mundial, com especial destaque para os EUA e para o seu actual presidente, Barack Obama. No caso português, a Presidência da República, órgão de soberania liderado pelo Prof. Cavaco Silva,é um dos mais activos nesta frente, procurando utilizar as redes sociais como um barómetro sobre a forma como os portugueses sentem a democracia e o estado da nação.

Towards the wide implementation of standards IEC 61968/70 (CIM) and IEC 61850 in the distribution system (CIGRÉ C6-105_2010)

Currently, power systems (PS) already accommodate a substantial penetration of distributed generation (DG) and operate in competitive environments. In the future, as the result of the liberalisation and political regulations, PS will have to deal with large-scale integration of DG and other distributed energy resources (DER), such as storage and provide market agents to ensure a flexible and secure operation. This cannot be done with the traditional PS operational tools used today like the quite restricted information systems Supervisory Control and Data Acquisition (SCADA) [1]. The trend to use the local generation in the active operation of the power system requires new solutions for data management system. The relevant standards have been developed separately in the last few years so there is a need to unify them in order to receive a common and interoperable solution. For the distribution operation the CIM models described in the IEC 61968/70 are especially relevant. In Europe dispersed and renewable energy resources (D&RER) are mostly operated without remote control mechanisms and feed the maximal amount of available power into the grid. To improve the network operation performance the idea of virtual power plants (VPP) will become a reality. In the future power generation of D&RER will be scheduled with a high accuracy. In order to realize VPP decentralized energy management, communication facilities are needed that have standardized interfaces and protocols. IEC 61850 is suitable to serve as a general standard for all communication tasks in power systems [2]. The paper deals with international activities and experiences in the implementation of a new data management and communication concept in the distribution system. The difficulties in the coordination of the inconsistent developed in parallel communication and data management standards - are first addressed in the paper. The upcoming unification work taking into account the growing role of D&RER in the PS is shown. It is possible to overcome the lag in current practical experiences using new tools for creating and maintenance the CIM data and simulation of the IEC 61850 protocol – the prototype of which is presented in the paper –. The origin and the accuracy of the data requirements depend on the data use (e.g. operation or planning) so some remarks concerning the definition of the digital interface incorporated in the merging unit idea from the power utility point of view are presented in the paper too. To summarize some required future work has been identified.

An architecture for ambient intelligent environments

This paper presents the proposal of an architecture for developing systems that interact with Ambient Intelligence (AmI) environments. This architecture has been proposed as a consequence of a methodology for the inclusion of Artificial Intelligence in AmI environments (ISyRAmI - Intelligent Systems Research for Ambient Intelligence). The ISyRAmI architecture considers several modules. The first is related with the acquisition of data, information and even knowledge. This data/information knowledge deals with our AmI environment and can be acquired in different ways (from raw sensors, from the web, from experts). The second module is related with the storage, conversion, and handling of the data/information knowledge. It is understood that incorrectness, incompleteness, and uncertainty are present in the data/information/knowledge. The third module is related with the intelligent operation on the data/information/knowledge of our AmI environment. Here we include knowledge discovery systems, expert systems, planning, multi-agent systems, simulation, optimization, etc. The last module is related with the actuation in the AmI environment, by means of automation, robots, intelligent agents and users.

A literacia digital como pré-requisito do acesso ao conhecimento: estudo numa população estudantil da licenciatura em Farmácia da ESTSP-IPP

Introdução: O uso das TIC, nomeadamente dos ambientes virtuais de aprendizagem, são uma possibilidade pedagógica promissora e atractiva pois permitem a construção de conhecimento e a interacção entre alunos, professores e tutores. Na perspectiva do estudante, compreende-se que, em contextos virtuais de aprendizagem a tendência é a de se valorizar cada vez mais a sua participação no processo de ensino e de aprendizagem. No entanto, para que seja possível a implementação de educação a distância é necessário que os estudantes, para além da motivação e da responsabilidade acrescida, possuam um conjunto de competências específicas para participar, efectivamente, num contexto virtual de aprendizagem. Nesse contexto, e para verificar se o uso das tecnologias no processo educacional é exequível, é necessário conhecer as competências digitais dos alunos da Licenciatura em Farmácia da Escola Superior de Tecnologia da Saúde do Porto. Métodos: O estudo é descritivo-transversal e permitiu a recolha de dados através do inquérito por questionário, previamente validado. A amostra em estudo foi retirada da população formada pelos 230 estudantes da Licenciatura de Farmácia, por um processo de amostragem não probabilística por conveniência, perfazendo um total de 52 indivíduos que frequentam o 2º ano. Apresentação de Resultados e Discussão: Os resultados permitiram concluir que os estudantes utilizam as TIC de forma variada mas normalmente em actividades de lazer. Em relação ao conhecimento e utilização das ferramentas da Web 2.0 concluí-se que, na generalidade, os estudantes não conhecem e não dominam a maioria das ferramentas da Web 2.0.Ou seja, os estudantes, mesmo com as suas habilidades e conhecimentos sobre tecnologia, principalmente em relação ao uso de computadores e da Internet, e conhecendo a importância destes recursos como simplificadores nos estudos, continuam a apresentar limitações, provavelmente devido a falta de informação ou a informações duvidosas provenientes de uma utilização incorrecta dos recursos. Estes resultados representam também um desafio, uma vez que caberá à Escola capacitar os estudantes na utilização de novas tecnologias, uma vez que, estas capacidades são cada vez mais solicitadas no mercado de trabalho, e serão primordiais para o sucesso do estudante numa formação a distância mediada por computador.

Pelos mares da leitura literária no ensino superior: há lugar(es) para/do livro na era digital?

É consensualmente reconhecida na atualidade a relevância da leitura na sociedade, abrindo-se, de forma crescente, a uma multiplicidade de dimensões alimentadas pela comunicação em rede. No ensino superior, tais dimensões merecem particular atenção, não só pelos desafios lançados pelo seu caráter cada vez mais diversificado, como pelas possíveis consequências que daí podem advir para o futuro profissional dos estudantes. Assim, nesta comunicação temos como objetivo indagar a importância do livro na era digital enquanto possível suporte configurador de práticas de leitura literária de estudantes do ensino superior a frequentar um 1.º Ciclo de estudos de Bolonha. No que se refere à metodologia adotada, face aos objetivos do estudo, considerámos adequada uma abordagem de natureza qualitativa, tendo como referencial metodológico o estudo de caso. Os participantes foram 27 estudantes inscritos na unidade curricular de Iniciação à Leitura e à Escrita que integra o plano de estudos da licenciatura em Educação Básica, na Escola Superior de Educação de Viseu (3.º ano, 1.º semestre, ano letivo 2015-2016). Os instrumentos utilizados foram 27 reflexões escritas individuais realizadas no âmbito do trabalho autónomo dos estudantes. A técnica privilegiada foi a análise de conteúdo. Apesar dos amplos itinerários de leitura proporcionados pela era digital, conclui-se que os estudantes atribuem grande importância ao livro impresso enquanto potenciador da motivação para a leitura literária, relegando para segundo plano possíveis vantagens do livro em suporte digital. Embora a tecnologia seja omnipresente no seu quotidiano, é o livro que resguarda os lugares das memórias que se entretecem nos seus percursos de leitura.

Optoelectronic Digital Capture Device Based on Si/C Multilayer Heterostructures

Combined tunable WDM converters based on SiC multilayer photonic active filters are analyzed. The operation combines the properties of active long-pass and short-pass wavelength filter sections into a capacitive active band-pass filter. The sensor element is a multilayered heterostructure produced by PE-CVD. The configuration includes two stacked SiC p-i-n structures sandwiched between two transparent contacts. Transfer function characteristics are studied both theoretically and experimentally. Results show that optical bias activated photonic device combines the demultiplexing operation with the simultaneous photodetection and self amplification of an optical signal acting the device as an integrated photonic filter in the visible range. Depending on the wavelength of the external background and irradiation side, the device acts either as a short- or a long-pass band filter or as a band-stop filter. The output waveform presents a nonlinear amplitude-dependent response to the wavelengths of the input channels. A numerical simulation and two building-blocks active circuit is presented and gives insight into the physics of the device.

Solução doméstica para televisão digital

Mestrado em Engenharia Electrotécnica e de Computadores

A dimensão política da segurança para o ciberespaço na União Europeia : a agenda digital, a estratégia de cibersegurança e a cooperação UE-OTAN

Mestrado em Relações Internacionais.