Gerenciamento dos resíduos de serviços de saúde do pronto socorro de um hospital escola na cidade de Botucatu

Health Care Waste (HCW) represents 1%, and it has presently gained a lot of importance. Adequate management is one of the great challenges to be faced by health care centers. It has gained distinction and been widely discussed by members of the sectors involved with sanitation, public health and environmental issues due to waste physical, chemical biological characteristics, which pose potential risk to the environment and public health. The present study aims at evaluating HCW internal management by following all its phases, determining indicators, classifying and quantifying, establishing production rates (kg /patient/day) for the sector and designing materials to disseminate appropriate HCW disposal in the Emergency Room of the UNESP University Hospital in the city of Botucatu according to the guidelines presently in force. : From June to October 2011, the waste flow was observed from its production to final disposal. Four weight measurements were performed on four consecutive days in the month of August by using a properly calibrated (in grams) digital scale at the times scheduled for collection of the produced waste. Hence, the daily and monthly amounts were estimated according to their classification. All the waste packaged in the bags in garbage cans in the Emergency Room for a 24-hour period was considered to be a sample. Separation was not adequately performed in that sector, and waste from Group A was mixed with that from Group D. The amount of infectious waste produced in the sector corresponded to 87.80 %, common waste to 10.93 % and recyclable waste to 1.27%. The mean daily HCW production was of 123.300 kg/day, and the total monthly production was of 3,822 kg/month, which was distributed as follows: Group A 3,355,750 kg/month; Group D 417,570 kg/month and recyclables 48,670 kg/month. The production rate corresponded to 0.47 kg/patient/day, thus showing... (Complete abstract click electronic access below)

Diagnóstico dos resíduos de construção e demolição: uma contribuição à elaboração e implantação da gestão integrada dos RCD no município de Guaratinguetá – SP

The problem of solid waste has caused discussions about the huge amount that is generated in Brazilian cities, in particular the waste from construction and demolition (CDW), called spoil. In many cases these wastes are disposed of improperly and even criminally in urban areas, causing serious economic, social and environmental problems. Due to the lack of public policies and appropriate management of such waste came up with the CONAMA, in its resolution nº 307 of 2002, the obligation of municipalities in deploy the integrated management of construction and demolition wastes for the resolution of problems caused by inadequate management and disposal of such waste. By following a methodology suggested by Pinto & González (2005), with adaptations of other authors, it is proposed in this work the lifting of a diagnosis of the CDW in the municipality of Guaratinguetá-SP, through theoretical analysis and field research, with purpose to guide the public servants in the elaboration and implementation of integrated management. The results must contain information necessary for that end, such as the knowledge of generators, agents, collectors and transporters, disposition areas and the disposal of waste

Análise de desempenho de lâmpadas LEDs e LFCs como alternativas em iluminação residencial em função da implementação da portaria ministerial n° 1007 que limita o uso de lâmpadas incandescentes no Brasil

With the imposition of the suspension of production and subsequent banning of incandescent light bulbs will be necessary to replace it by other more energy-efficient. Although the main alternative is the compact fluorescent lamp, the environmental impact caused by it due to incorrect disposal and the amount of harmonics included in the network resulting in losses related to the quality of electric power system makes them sought new alternatives for lighting systems that are efficient and have low environmental impact. In this context, the LED (Lighting Emitting Diode), based on solid-state components, is presented as an option for new projects and replacement of existing lighting. In this work we studied aspects of energy, environmental and economic impacts of a possible replacement of conventional lighting systems for new technology. From laboratory tests and surveys of the costs of different types of lamps used for residential lighting, we performed a comparative analysis considering energy and economic aspects which showed that the LED technology, but has a high initial investment, it is best when power quality and environmental preservation are relevant factors in decision making for the choice of technology to be used in the lighting system

Caracterização físico-química e microbiológica de diferentes amostras de uma precipitação coletada e armazenada após passagem por telhado

The decreasing availability of drinking water is a problem that has existed for a long time and continues to be aggravated, especially by the increase in population and pollution of water resources. Due to the need to find alternatives in order to ensure water supplies in sufficient quantity and quality for consumption by populations, rainwater collection arises as an alternative. The present study was developed in Ipeúna-SP, consisting of an experimental system of collection and storage of rainwater on the roofs of buildings. Samples of the same precipitation, differentiated through the initial disposal and treatment of the collected water, were stored during a period of six months and monitored through physical, chemical and microbiological analyses. With the results, the qualitative characteristics of the stored precipitation were found, the main differences among the samples were identified and the needs of treatment were studied.

Diagnóstico dos resíduos de construção e demolição para elaboração e implantação da gestão integrada dos RCD no município de Guanambi – BA

Taking as starting the environmental, social and economic impact of construction and demolition waste in Brazilian cities were created legal mechanisms for management and administration, seeking to minimize the impacts to the maximum, since the irregular deposition can be characterized as environmental crime. CONAMA Resolution No. 307 of 2002 establishing the mandatory implementation of an Integrated Management System Construction Waste and Demolition, guiding the classification and designation of the waste generating agents, collection agents and transporters, and the areas of culling and disposal of waste. The technical partnership between the Ministry of Cities, the Environment Ministry and the Caixa Econômica Federal, coordinated by Pinto & Gonzales (2005) Management in the work and management of construction waste, proposed a guidance manual to guide the implementation of a System Integrated Management of Construction Waste in Municipalities. The municipality of Guanambi in the state of Bahia, in full economic rise, lacks a waste management of construction and demolition, since there has areas for the disposal of waste being proposed in this paper the diagnosis of waste generation in the municipality as part of the methodology proposed by the work of Pinto & Gonzales (2005).

Estudos de degradação de filmes de polietileno

A produção de lixo pela humanidade é inevitável, porém, o destino dos residuos sólidos e seu acondicionamento inadequado têm trazido graves problemas ambientais. Dentre os resíduos sólidos, os plásticos merecem destaque, pois cresceram significativamente em uso e descarte, totalizando 20% do volume mundial de lixo. Isto decorre de algumas das propriedades destes materiais, como durabilidade, resistência, leveza e baixo custo de produção. Nas grandes cidades brasileiras, 7% do lixo produzido correspondem a produtos de plástico em filme, geralmente usado em aplicações de curta duração, como o polietileno. Este material persiste no ambiente por décadas, sendo, portanto, resistente à degradação. Diversos destinos podem ser tomados pelo resíduo de polietileno descartado, como a deposição em lixões e aterros sanitários, incineração, reciclagem e biodegradação. A biodegradação pode ser definida como a degradação catalisada por atividade biológica, levando, no final do processo, à mineralização e/ou formação de biomassa. Na natureza, a destruição destes materiais se dá, na verdade, por meio da “degradação ambiental”, na qual atuam sinergeticamente a biodegradação, a fotooxidação, a termo-oxidação e a hidrólise. Neste sentido, desde os anos 1970, diferentes formulações foram propostas para otimizar a susceptibilidade do PE à degradação ambiental. Sabe-se que o PE está sujeito a sofrer mudanças quando exposto à luz ultravioleta e/ou ao calor, e que estas modificações podem alterar a resposta dos microrganismos no processo de biodegradação. Desta forma, este estudo analisou as modificações ocasionadas por tratamentos com luz ultravioleta, calor e exposição ao sol, bem como a resposta da microbiota natural do solo a estes tratamentos, através de análises de espectroscopia... (Resumo completo, clicar acesso eletrônico abaixo)

Estudo de caso: aplicação do método DMAIC-White Belt- na redução de latas amassadas em uma produção de leite em pó

This work consists of the implementation of the steps Define, Measure , Analyze , Improve and Control ( DMAIC ) to develop a Six Sigma project in an industry the food industry. The objective was to demonstrate a potential for reducing the occurrence of crushed cans in potting milk powder industry in a White Belt project. The food industry accounts for about 9 % of Brazil's gross domestic product ( GDP ), generating thousands of jobs . Among the major sectors of the food industry is the manufacturing sector of milk , occupies approximately 10 % of the total turnover of the food industry . Brazil is considered today one of the eight largest producers of milk powder in the world. The milk powder is packed , mostly for aluminum cans that are lined internally with varnishes and other materials to protect the milk of metals from aluminum. When the cans are dented food protection is compromised and may lead ingestion causing dis-eases such as botulism. Aiming to solve the problem of dented cans methodology was used as a case study with a quantitative approach through the DMAIC method. Some quality tools used in each step of the project as brainstorming , cause and effect diagram , flowchart , ef-fort and impact matrix, 5W1H , among other Pareto diagram is presented . A survey about the disposal of cans in the company verifying a mean loss and, from this histor-ical , a goal loss was calculated was performed . With the target set we calculated the annual saving design . During application of DMAIC was found that the highest rate of loss occurred in transportation between the factory and the factory that fills cans milk . Several actions were taken to resolve problems that resulted in dented cans and the first two months of phase control it was found that the smaller losses calculated target resulting in a saving for the company. The short time of implementa-tion of the Improve phase did not allow a more detailed a ...

Desidratação de lodo proveniente de ETA através de tubos geotexteis

Currently exists a growing concern for the preservation of the environment Around the world, the environmental awareness in Brazil has strengthened during the past two decades. This concern in Brazil arises from the creation of mechanisms of supervision and punishment on the part of the environmental agencies. In order to meet the pertinent legislation many public and private companies have performed dehydration of waste generated in the process of treatment of industrial effluents, waste water and water treatment in order to reduce transport and disposal costs. The use of geotextile tubes has proven technically and economically feasible to be applied in various situations from water treatment to mining tailings. This work presents the solution adopted for an environmental liability in water treatment plant through the use of geotextile tubes to reduce the water content of the disposal. We evaluated the size distribution curves, Atterberg limits, and chemical composition of the residue. Found high concentrations of aluminum in the waste which would characterize environmental pollution if disposed off directly in nature with no treatment

Deslocamento de abomaso em vacas leiteiras

The genetic selection and the nutritional management to improve milk production make the dairy cattle more susceptible to the development of diseases, such as the abomasal displacement. It is the most frequently detected abomasal problem and it is the main cause of abdominal surgeries in dairy cattle. It is a multifactorial disease that occurs mainly in dairy cattle of high production during the puerperium. The abomasal displacement can occur to the right (DAD) or to the left (DAE), being the former more frequent than the latter. It is related to feeding management and occurs in animals that also have other diseases such as hypocalcaemia, ketosis and retained placenta. The disease causes economical losses in dairy cattle because of the costs with treatment, reduction of production, increase of the interval between the parturition, loss of body weight, early discard of the matrix and mortality. The most usual clinical signs are apathy, dehydration, low to serious ruminal timpanismo (gas accumulation in the abomasum) with reduction or lack of motility, liquid splash sound during the ballottement of the right flank, metallic sound to percussion, presence of a structure similar to distended viscera in the thorax or in the paralombar cavity on the side corresponding to the displacement, and liquefied, dark, scarce and fetid feces. The treatment is surgical, and the most used technique is the omentopexy on the left flank. The hidroelectrolytic correction must be performed and the concomitant diseases must be treated. The prophylaxis consists of adequate nutrition and pre-parturition management, besides reduction of stress and other diseases of the puerperium

Reciclagem de poliestireno expandido: compósito com fibras de sisal para confecção de placas de circuito impresso

In this work polystyrene composites reinforced with recycled sisal fibers were processed, in order to apply in the manufacture of printed circuit boards. A thermoplastic matrix of recycled polystyrene was used, this material came from waste expanded polystyrene (EPS) used in appliance's packages. Composites were prepared with 15% and 25% of sisal fibers. To obtain the composites, wasted EPS and natural sisal fibers were chosen, to encourage recycling and reuse of household waste and also the use of renewable resources. The composites were analyzed by standard tensile and flexural test, in order to verify the mechanical properties of the material. The characterization of the composite was done by scanning electron microscopy (SEM) , thermogravimetry (TGA / DTG) , differential scanning calorimetry (DSC) and dielectric analysis . The analysis of the results showed that the percentage of fibers in the composite influences directly the thermal and mechanical properties. Plates with a lower percentage of fibers showed superior properties at a higher percentage. The composite material obtained is easy to process and it's use is feasible for the confection of printed circuit boards, considering it's mechanical, thermal and insulative properties

Desafios ambientais na indústria automobiliística: uma análise do processo de reciclagem e reutilização de materiais

This research has as main objective the analysis of the auto industry has done to reduce disposal of solid waste in its production process as much as to facilitate the recycling of cars after they complete their life cycle. Despite the auto industry is not one of the most polluting in terms of its production process, it produces a good that is causing major pollution. In despite of the great current concern in seeking to reduce the emissions of pollutants by vehicles, as important as the quest for cleaner fuels is the study of how to dispose of old cars. Even if the car production does not increase significantly each year in relative terms, we must consider the fleet of used cars that still circulates in the world. Ending the mammoth “cemeteries” of automobiles, however, it is not so easy, even because the car is composed of various materials, which in many cases are not easily separable. In addition to an overview, the research seeks to examine the possible advances in Brazil related to the process of auto recycling

Coleta e estratégia simplificada de tratamento de água de chuva para fins não potáveis com ênfase no uso industrial

Este projeto investigou alternativa de tratamento simplificada para fins não potáveis para aplicação em escala industrial. É neste contexto que esta pesquisa alojou sua importância – nas possíveis estratégias de tratamento, em especial na utilização de sistema contendo filtro de pressão e no uso do amido natural de milho como coagulante, auxiliando no processo de filtração, visando aumento da segurança sanitária e da qualidade da água de chuva disponibilizada para aproveitamento. A hipótese do trabalho foi investigar a possibilidade da diminuição ou até eliminação do volume de água descartada na operação de abstração da primeira chuva. Para tal, foram realizados ensaios em escala de laboratório com uma precipitação coletada nos dias 10/03/08 e 03/04/2008. Os resultados da estratégia de tratamento delineada foram comparados com os obtidos pela estratégia convencional com descarte de 1,5 mm da primeira chuva, o que corresponde a um volume de 558 L de água de chuva. Utilizou-se a dosagem de 6,0 mg/L para fim de comparação com a água bruta, sem nenhum tratamento, e com a água somente filtrada. Os resultados não confirmaram a hipótese de que o tratamento com amido natural permite eliminar a etapa de abstração da primeira chuva, porém, vale ressaltar que a qualidade da água coletada já era muito boa previamente ao tratamento. Merece destaque o fato de que a amostra de precipitação submetida aos ensaios apresentados foi coletada em período de freqüente precipitação e, embora tenha sido observado o interstício de 3 dias consecutivos de estiagem a qualidade da água de chuva coletada pode ser considerada boa (34UH de cor aparente; 8,84 UT de turbidez e 238,2 (NMP) de coliformes totais e 3 (NMP) de coliformes termotolerantes). Acredita-se que, para o caso de precipitações ocorridas após longo período de estiagem, a necessidade de tratamento... (Resumo completo, clicar acesso eletrônico abaixo)

Preparação e caracterização da casca de banana prata particulada para aplicação com reforço em compósito de matriz de PEAD

The waste, exaggerated and incorrect disposal of biomass are common practices in modern times where everything is disposable. However the growing concern with the nature and the environment compel man to give nobler destinations for these products through sustainability and recycling of waste. Banana peel is a residual biomass, which is not consumed. It generates tons of waste per week in São Paulo city. This trash is disposed in dumps and landfills, which could be reduced by using it as reinforcement in natural composites. The high density polyethylene (HDPE) is a polymer derived from the ethylene polymerization and is easily recycled. Which makes it a sustainable material. In the present work characteristics of the natural composite composed with banana peel and high-density polyethylene were studied. It was noted that removing the lignin present in the banana peel, the fiber introduces a significant improvement in thermal resistance. The preparation of composite was made with a ratio of 5% and 10% of reinforcement in comparison with polymeric matrix mass. Composites were thermally, mechanically and microscopically characterized. The addition of fiber in the polymer increased the mechanical strength of the composite. The fiber surface treatment with distilled water removed the amorphous material present in the fibers, improving significantly thermal stability and increasing crystallinity of the celullose. The addition of 5% fiber in mass to the polymer increased significantly the tensile strength and elasticity modulus for the composite. With 10% of fiber addiction there were also an improvement when compared with pure HDPE, but when compared with 5% composite the mechanical properties are slightly lower. This may be due to the fiber particle size, which are small and eventually become a hub of tension ... (Complete abstract click electronic access below)

Aplicação de cinza do bagaço de cana-de-açúcar em latossolo cultivado com cana-de-açúcar

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Avaliação da qualidade de óleos de fritura utilizados em restaurante universitário

Frying is a widely used method of preparing food, because it is a very fast and convenient process, and because it provides specific characteristics of color, flavor, odor, and texture, besides having great consumer acceptance. Therefore, the interest in the physiological effects that oils heated at high temperatures can cause to the human body arises. The aim of this work was to analyze the levels of frying used oil alteration in different kinds of foods served at the university restaurant at “Instituto de Biociências, Letras e Ciências Exatas” (IBILCE), in São José do Rio Preto-SP. In addition, it aims to make the restaurant aware of the good ways to fry and the commitment of providing good quality food to students and professionals of the Institute. With this purpose, determination of total polar compounds, conjugated dienoic acids, peroxide value, and fatty acid profile were analyzed. Two rapid tests were also used: 3M Fat Monitor and Oil Test kit. The results were compared with limits recommended for the disposal of oils and fats used in frying by the Brazilian Health Surveillance Agency (ANVISA), by other countries, and by other researches. Thus, it was concluded that the university restaurant provides the consumers with fried food of good quality, since none of the analyses showed results above recommended, although there is a need of improvement in the quality control of the oil used, in order to avoid unnecessary costs to the university restaurant.