Challenges of modeling depth-integrated marine primary productivity over multiple decades: A case study at BATS and HOT

The performance of 36 models (22 ocean color models and 14 biogeochemical ocean circulation models (BOGCMs)) that estimate depth-integrated marine net primary productivity (NPP) was assessed by comparing their output to in situ (14)C data at the Bermuda Atlantic Time series Study (BATS) and the Hawaii Ocean Time series (HOT) over nearly two decades. Specifically, skill was assessed based on the models' ability to estimate the observed mean, variability, and trends of NPP. At both sites, more than 90% of the models underestimated mean NPP, with the average bias of the BOGCMs being nearly twice that of the ocean color models. However, the difference in overall skill between the best BOGCM and the best ocean color model at each site was not significant. Between 1989 and 2007, in situ NPP at BATS and HOT increased by an average of nearly 2% per year and was positively correlated to the North Pacific Gyre Oscillation index. The majority of ocean color models produced in situ NPP trends that were closer to the observed trends when chlorophyll-alpha was derived from high-performance liquid chromatography (HPLC), rather than fluorometric or SeaWiFS data. However, this was a function of time such that average trend magnitude was more accurately estimated over longer time periods. Among BOGCMs, only two individual models successfully produced an increasing NPP trend (one model at each site). We caution against the use of models to assess multiannual changes in NPP over short time periods. Ocean color model estimates of NPP trends could improve if more high quality HPLC chlorophyll-alpha time series were available.

Specific depth cone resistivity measurements to determine soil engineering properties

The University of British Columbia (UBC) began performing piezocone penetration tests (CPTU) with electrical resistivity measurements (RCPTU) in 1989. Since then, RCPTU research at UBC has focused on obtaining geo-environmental parameters such as fluid resistivity and soil engineering properties such as porosity and degree of saturation from measurements of bulk soil electrical resistivity using the empirical relationship proposed by Archie (1942). Within this framework, the paper illustrates and discusses important design and calibration issues for resistivity modules such as the use of isolated circuitry to achieve linear calibrations over large ranges of resistivity. The suitability of RCPTU measurements for determination of geo-environmental and geotechnical parameters are assessed using typical ranges of soil and groundwater properties and methods of isolating individual factors for study are discussed. Illustrative examples of RCPTU research efforts including the environmental characterization of mine tailings, delineation of saline water intrusions in fresh water aquifers and the quality control of geotechnical ground densification are presented throughout the text. It is shown that groundwater temperature and hence ion mobility is not significantly altered by frictional heat generated during piezocone penetration and that ratio-based approaches to monitoring soil porosity can be used to eliminate the requirement for extensive groundwater sampling programs. Lastly, it is shown that RCPTU measurements above the water table can only be made using resistivity modules that are stable over a large range of resistivities and that such measurements are the most difficult to interpret because of grain surface conduction effects and generally unknown fluid resistivities.

Proposal of an On-demand Software Deployment System Based on Application Streaming, Virtualization Techniques and P2P Transport

This paper presents the work in progress of an on-demand software deployment system based on application virtualization concepts which eliminates the need of software installation and configuration on each computer. Some mechanisms were created, such as mapping of utilization of resources by the application to improve the software distribution and startup; a virtualization middleware which give all resources needed for the software execution; an asynchronous P2P transport used to optimizing distribution on the network; and off-line support where the user can execute the application even when the server is not available or when is out of the network. © Springer-Verlag Berlin Heidelberg 2010.

Micromechanics of dentin/adhesive interface in function of dentin depth: 3d finite element analysis

Objectives: The aim of this study was to analyze the stress distribution on dentin/adhesive interface (d/a) through a 3-D finite element analysis (FEA) varying the number and diameter of the dentin tubules orifice according to dentin depth, keeping hybrid layer (HL) thickness and TAǴs length constant. Materials and Methods: 3 models were built through the SolidWorks software: SD - specimen simulating superficial dentin (41 x 41 x 82 μm), with a 3 μm thick HL, a 17 μm length Tag, and 8 tubules with a 0.9 μm diameter restored with composite resin. MD - similar to M1 with 12 tubules with a 1.2 μm diameter, simulating medium dentin. DD - similar to M1 with 16 tubules with a 2.5 μm diameter, simulating deep dentin. Other two models were built in order to keep the diameter constant in 2.5 μm: MS - similar to SD with 8 tubules; and MM - similar to MD with 12 tubules. The boundary condition was applied to the base surface of each specimen. Tensile load (0.03N) was performed on the composite resin top surface. Stress field (maximum principal stress in tension - σMAX) was performed using Ansys Wokbench 10.0. Results: The peak of σMAX (MPa) were similar between SD (110) and MD (106), and higher for DD (134). The stress distribution pathway was similar for all models, starting from peritubular dentin to adhesive layer, intertubular dentin and hybrid layer. The peak of σMAX (MPa) for those structures was, respectively: 134 (DD), 56.9 (SD), 45.5 (DD), and 36.7 (MD). Conclusions: The number of dentin tubules had no influence in the σMAX at the dentin/adhesive interface. Peritubular and intertubular dentin showed higher stress with the bigger dentin tubules orifice condition. The σMAX in the hybrid layer and adhesive layer were going down from superficial dentin to deeper dentin. In a failure scenario, the hybrid layer in contact with peritubular dentin and adhesive layer is the first region for breaking the adhesion. © 2011 Nova Science Publishers, Inc.

QK-Means: A clustering technique based on community detection and K-Means for deployment of cluster head nodes

Wireless Sensor Networks (WSN) are a special kind of ad-hoc networks that is usually deployed in a monitoring field in order to detect some physical phenomenon. Due to the low dependability of individual nodes, small radio coverage and large areas to be monitored, the organization of nodes in small clusters is generally used. Moreover, a large number of WSN nodes is usually deployed in the monitoring area to increase WSN dependability. Therefore, the best cluster head positioning is a desirable characteristic in a WSN. In this paper, we propose a hybrid clustering algorithm based on community detection in complex networks and traditional K-means clustering technique: the QK-Means algorithm. Simulation results show that QK-Means detect communities and sub-communities thus lost message rate is decreased and WSN coverage is increased. © 2012 IEEE.

An assessment of fiscal and regulatory barriers to deployment of energy efficiency and renewable energy technologies in Guyana

Includes bibliography.

The employment situation in Latin America and the Caribbean: Countercyclical policies for a sustained recovery in employment

Latin America and the Caribbean experienced an unexpectedly vigorous economic recovery in 2010 after the output contraction of 2009. This upturn was reflected in the region’s employment and unemployment rates, which resumed the positive trends that had been broken by the crisis, and formal wages rose slightly. The strength of the recovery and labour-market performance varied markedly across subregions and countries, however. The first part of this joint ECLAC/ILO publication on the employment situation in Latin America and the Caribbean looks at how labour markets have responded to the rapid economic upswing in 2010 and early 2011, highlighting both the significant advances achieved in the post-crisis period and the sharp differences evident across subregions and countries. As well as tapping into the improved external conditions which followed upon the Asianled global economic upturn, several Latin American countries were also able to contain the impacts of the crisis and underpin their own recovery with countercyclical policies, thanks to the leeway gained by their macroeconomic management during the run of growth from 2003 to 2008. These countries were in a position to implement expansionary fiscal and monetary policies, some of which channelled higher fiscal spending through labour-market policies or softened the impact of the crisis on employment and income, as discussed in previous ECLAC/ILO bulletins. Since the region is fairly new to the use of countercyclical policies, the second part of this document reviews the experiences arising from those policies and considers lessons for institutionalizing them. Economic growth in the Latin American and Caribbean region has historically been marked by the volatility of its economic cycles, with high-growth periods being succeeded by deep crises. Volatility has conspired against the use of production resources over extended periods and short growth horizons have impeded investment in capital and labour. In the recent international crisis, the deployment of countercyclical macroeconomic policy helped to reduce the depth and duration of the impact and to leverage a more rapid recovery. It is therefore worth looking at the fundamentals of a long-term countercyclical macroeconomic policy which would provide the tools needed to deal with future crises and pave the way for economic growth that may be sustained over time. A special factor during this crisis was that a greater effort was made to support employment and income. Several of the labour-market policy measures taken acted as vehicles for conveying increased fiscal spending to individuals, reflecting greater consideration for equality concerns. Indeed, these measures were aimed not only at stabilizing andstrengthening domestic demand per se, but also at preventing the crisis from hitting lowest-income households the hardest, as had occurred in previous episodes. And —again unlike the pattern seen in previous episodes— inflation actually fell during the crisis as the high food and fuel prices seen in the run-up to it eased as a result of both existing macroeconomic policies and global conditions. This averted the surge in inequality so often seen in previous crises. Two caveats must be added, however. First, not all the countries were in a position to deploy strong countercyclical policies. Many simply lacked the fiscal space to do so. Second, some countries took this sort of measure more as an ad hoc response to the crisis than as part of a clearly established countercyclical policy strategy. The challenge, then, is to institutionalize a countercyclical approach throughout the economic cycle. Taking up this challenge is part of making economic growth more sustainable. This year —2011— was ushered in by rapid economic growth and substantial improvements in labour indicators. With the region’s GDP projected to grow well over 4% this year, ECLAC and ILO estimate that the regional unemployment rate will fall substantially again, from 7.3% in 2010 to between 6.7% and 7.0% in 2011.

An assessment of fiscal and regulatory barriers to deployment of energy efficiency and renewable energy technologies in Belize

Belize is currently faced with several critical challenges associated with the production, distribution and use of energy. Despite an abundance of renewable energy resources, the country remains disproportionately dependent on imported fossil fuels, which exposes it to volatile and rising oil prices, limits economic development, and retards its ability to make the investments that are necessary for adapting to climate change, which pose a particularly acute threat to the small island states and low-lying coastal nations of the Caribbean. This transition from energy consumption and supply patterns that are based on imported fossil fuels and electricity towards a more sustainable energy economy that is based on environmentally benign, indigenous renewable energy technologies and more efficient use of energy requires concerted action as the country is already challenged by limited fiscal space which reduces its ability to provide some fiscal incentives, which have been proven to be effective tools for the promotion of sustainable energy markets in a number of countries. This report identifies the fiscal and regulatory barriers to implementation of energy efficiency measures and renewable energy technologies in Belize. Data and information were derived from stakeholder consultations conducted within the country. The major result of the assessment is that the transition of policies and plans into tangible action needs to be increased. In this regard, it is necessary to articulate sub-policies of the National Energy Policy to amend the Public Utilities Commission Act, to develop a grid interconnection policy, to establish minimum energy performance standards for buildings and equipment and to develop a public procurement policy. Finally, decisions on renewable energy and energy efficiency-related incentives from the Government formally requires decision-makers to solve what may be extremely complex optimization problems in order to obtain the lowest-cost provision of energy services to society, thereby weighing the cost of revenue losses with the benefits of fuel and infrastructure expansion savings. The establishment of a management system that is efficient, flexible, and transparent, which will facilitate the implementation of the strategic objectives and outputs in the time available, with the financial resources allocated is recommended. Support is required for additional institutional and capacity strengthening.

An assessment of fiscal and regulatory barriers to deployment of energy efficiency and renewable energy technologies in Curaçao

The current energy systems within Curaçao depend primarily on high cost, imported fossil fuels, and typically constitute power sectors that are characterized by small, inefficient generation plants which result in high energy prices. As a consequence of its dependence on external fuel supplies, Curaçao is extremely vulnerable to international oil price shocks, which can impact on economic planning and foreign direct investment within their industrial sectors. The ability of the successive governments to source capital for economic stimulation and social investment is therefore significantly challenging. Additionally, there is over-dependence on two of the most climate-sensitive economic sectors, namely the tourism and fisheries sectors, but the vulnerabilities of the country to the effects of climate change make adaptation difficult and costly. It is within this context that this report focuses on identification of the fiscal and regulatory barriers to implementation of energy efficiency and renewable energy technologies in Curaçao with a view of making recommendations for removal of these barriers. Consultations with key Government officials, the private sector as well as civil society were conducted to obtain information and data on the energy sector in the country. Desktop research was also conducted to supplement the information gathered from the consultations. The major result of the assessment is that Curaçao is at an early stage in the definition of its energy sector. Despite some infrastructural legacies of the pre-independence era, as well as a number of recent developments including the modernization and expansion of its windfarms and completion of a modern Electricity Policy, there are still a number of important institutional and policy gaps within the energy sector in Curaçao. The most significant deficiency is the absence of a ministry or Government agency with portfolio responsibility for the energy sector as a whole; this has: limited the degree to which the activities of energy sector stakeholders are coordinated and retarded the development and implementation of a comprehensive national energy policy. The absence of an energy policy, which provides the framework for energy planning, increases investor risk. Also, the lack of political continuity that has emanated from the frequent changes in Government administrations is a concern among stakeholders and has served to reduce investor confidence in particular, and market confidence in general.

Information and communication technology for disaster risk management in the Caribbean: subregional solutions to the challenge of limited human resource capacity

This document was adapted from a paper originally presented to the 8th Annual Caribbean Conference of Comprehensive Disaster Management, held in Montego Bay, Jamaica in December, 2013. It summarizes several activities that ECLAC has undertaken to assess the current state of information and communications technology (ICT) in the field of disaster risk management (DRM) as practiced in the Caribbean. These activities included an in-depth study that encompassed a survey of disaster management organizations in the region, an Expert Group Meeting attended by the heads of several national disaster offices, and a training workshop for professionals working in DRM in the Caribbean. One of the notable conclusions of ECLAC’s investigation on this topic is that the lack of human capacity is the single largest constraint that is faced in the implementation of ICT projects for DRM in the Caribbean. In considering strategies to address the challenge of limited human capacity at a regional level, two separate issues are recognized – the need to increase the ICT capabilities of disaster management professionals, and the need to make ICT specialists available to disaster management organizations to advise and assist in the implementation of technology-focused projects. To that end, two models are proposed to engage with this issue at a regional level. The first entails the establishment of a network of ICT trainers in the Caribbean to help DRM staff develop a strategic understanding of how technology can be used to further their organizational goals. The second is the development of “Centres of Excellence” for ICT in the Caribbean, which would enable the deployment of specialized ICT expertise to national disaster management offices on a project-by-project basis.

Atividade microbiana e diversidade de fungos micorrízicos arbusculares em espécies arbóreas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)