Evaluation of Stockpiled Berseem Clover and Brown Midrib Sorghum x Sudangrass as Supplements for Grazed Cornstalks in Beef Cow Wintering Systems

Berseem clover and oats were incorporated into a corn-oat/berseem clover rotation in 1994-1996. Two cuttings of oat-berseem clover hay were harvested during the summer before forage was stockpiled for winter grazing. In 1995, brown midrib sorghum x sudangrass hybrid was seeded into a field adjacent to a corn field. This was repeated in 1996 with a standard sorghum x sudangrass hybrid. After corn harvest in 1994–1996, Charolais x Angus x Simmental cows and heifers in midgestation were allotted to corn crop residue, corn crop residue-berseem clover, and corn crop residue-sorghum x sudangrass fields at 2.5 acres/cow, or to a drylot. Berseem clover had greater concentration of digestible organic matter and crude protein than corn crop residues. Corn crop residue digestible organic matter concentration was lower than berseem clover and the brown midrib sorghum x sudangrass, but was higher than that of the standard sorghum x sudangrass hybrid in 1996. Cows grazing corn crop residues without complementary forages required an average of 2,374 less lb. hay per cow than cows maintained in a drylot in 1994-1996. In 1994 and 1996, simultaneous grazing of berseem clover with corn crop residues did not reduce hay feeding more than feeding corn crop residues alone, yet did significantly reduce the amount of hay needed in 1995 to maintain cows by 358 and 376 lb. hay per cow compared with grazing corn crop residues without complementary forage.

Evaluation of a Year-Round Grazing System: Winter Progress Report

The winter component of a year-round grazing system involving grazing of corn crop residues followed by grazing stockpiled grass legume forages was compared at the McNay Research Farm with that of the winter component of a minimal land system that maintained cows in drylot,. In the summer of 1995, two cuttings of hay were harvested from two 15-acre fields containing “Johnston” endophyte-free tall fescue and red clover, and two cuttings of hay were taken from two 15-acre fields of smooth bromegrass and red clover. Hay yields were 4,236 and 4,600 pounds of dry matter per acre for the tall fescue--red clover and smooth bromegrass--red clover. Following grain harvest four 7.5-acre fields containing corn crop residue were stocked with cows at midgestation at an allowance of 1.5 acres per cow. Forage yields at the initiation of corn crop grazing were 3,766pounds of dry matter per acre for corn crop residue, 1,748 pounds for tall fescue--red clover, and 1,.880 pounds for smooth bromegrass--red clover. Corn crop residues and stockpiled forages were grazed in a strip stocking system. For comparison, 20 cows were placed in two drylots simultaneously to the initiation of corn crop grazing where they remained throughout the winter and spring grazing seasons. Cows maintained in drylot or grazing corn crop residue and stockpiled forages were supplemented with hay as large round bales to maintain a body condition score of five. No seasonal differences in body weight and body condition were observed between grazing cows or cows maintained in drylot, but grazing cows required 87% and 84% less harvested hay than cows in drylot during the winter and spring respectively. Because less hay was needed to maintain grazing cows, an excess of 11,905 and 12,803 pounds of hay dry matter per cow remained in the year-round grazing system. During corn crop grazing, organic matter yield decreased at 27.3 pounds of organic matter per day from grazed areas of corn crop residue. Organic matter losses due to weathering were 9.4, 12.9, and 15.8 pounds per day in corn crop residue, tall fescue-red clover and smooth bromegrass-red clover. Organic matter losses from grazed and ungrazed areas during stockpiled grazing were 7.3 and 6.9 for tall fescue--red clover and 2.1, 2.9 for smooth bromegrass--red clover.

Geochemical synthesis for the Effingen Member in boreholes at Oftringen, Gösgen and Küttigen

The Effingen Member is a low-permeability rock unit of Oxfordian age (ca. 160 Ma) that occurs across northern Switzerland. It comprises sandy calcareous marls and (argillaceous) limestones. This report describes the hydrogeochemistry, mineralogy and supporting physical properties of the Effingen Member in three boreholes in the Jura-Südfuss area: Oftringen, Gösgen and Küttigen, where it is 220–240 m thick. The top of the Effingen Member is at 420, 66 and 32 m depths at the three sites. Core materials are available from Oftringen and Gösgen, whereas information from Küttigen is limited to cuttings, in-situ hydrogeological testing and geophysical logging. Hydrogeological boundaries of the Effingen Member vary between locations. Ground-water flows were identified during drilling at the top (Geissberg Member), but not at the base, of the Effingen Member at Oftringen, at the base (Hauptrogenstein Formation) of the Effingen Member at Gösgen, and in a limestone layer (Gerstenhübel unit) within the Effingen Member at Küttigen. The marls and limestones of the Effingen Member have carbonate contents of 46–91 wt.-% and clay-mineral contents of 5–37 wt.-%. Pyrite contents are up to 1.6 wt.-%, but no sulphate minerals were detected by routine analyses. Clay minerals are predominantly mixed-layer illite-smectite, illite and kaolinite, with sporadic traces of chlorite and smectite. Veins filled with calcite ± celestite occur through the Effingen Member at Oftringen but not at Gösgen or Küttigen. They formed at 50–70 ºC from externally derived fluids, probably of Miocene age. Water contents are 0.7–4.2 wt.-%, corresponding to a water-loss porosity range of 1.9–10.8 vol.-%. Specific surface areas, measured by the BET method, are 2–30 m2/g, correlating with clay-mineral contents. Water activity has been measured and yielded surprisingly low values down to 0.8. These cannot be explained by pore-water salinity alone and include other effects, such as changes in the fabric due to stress release or partial saturation. Observed variations in measurements are not fully understood. Cation exchange capacity (CEC) and exchangeable cation populations have been studied by the Ni-en method. CEC, derived from the consumption of the index cation Ni, is 9–99 meq/kgrock at a solid:liquid ratio of 1, correlating with the clay-mineral content. Cation concentrations in Ni-en extract solutions are in the order Na+≥Ca2+>Mg2+>K+>Sr2+. However, the analytical results from the Ni-en extractions have additional contributions from cations originating from pore water and from mineral dissolution reactions that occurred during extraction, and it was not possible to reliably quantify these contributions. Therefore, in-situ cation populations and selectivity coefficients could not be derived. A suite of methods have been used for characterising the chemical compositions of pore waters in the Effingen Member. Advective displacement was used on one sample from each Oftringen and Gösgen and is the only method that produces results that approach complete hydrochemical compositions. Aqueous extraction was used on core samples from these two boreholes and gives data only for Cl- and, in some cases, Br-. Out-diffusion was used on core samples from Oftringen and similarly gives data for Cl- and Br- only. For both aqueous extraction and out-diffusion, reaction of the experimental water with rock affected concentrations of cations, SO42 and alkalinity in experimental solutions. Another method, centrifugation, failed to extract pore water. Stable isotope ratios (δ18O and δ2H) of pore waters in core samples from Oftringen were analysed by the diffusive exchange method and helium contents of pore water in Oftringen samples were extracted for mass spectrometric analysis by quantitative outgassing of preserved core samples. Several lines of evidence indicate that drillcore samples might not have been fully saturated when opened and subsampled in the laboratory. These include comparisons of water-loss porosities with physical porosities, water-activity measurements, and high contents of dissolved gas as inferred from ground-water samples. There is no clear proof of partial saturation and it is unclear whether this might represent in-situ conditions or is due to exsolution of gas due to the pressure release since drilling. Partial saturation would have no impact on the recalculation of pore-water compositions from aqueous extraction experiments using water-loss porosity data. The largest uncertainty in the pore-water Cl- concentrations recalculated from aqueous extraction and out-diffusion experiments is the magnitude of the anion-accessible fraction of water-loss porosity. General experience of clay-mineral rich formations suggests that the anion-accessible porosity fraction is very often about 0.5 and generally in a range of 0.3 to 0.6 and tends to be inversely correlated with clay-mineral contents. Comparisons of the Cl- concentration in pore water obtained by advective displacement with that recalculated from aqueous extraction of an adjacent core sample suggests a fraction of 0.27 for an Oftringen sample, whereas the same procedure for a Gösgen sample suggests a value of 0.64. The former value for anion-accessible porosity fraction is presumed to be unrepresentative given the local mineralogical heterogeneity at that depth. Through-diffusion experiments with HTO and 36Cl- suggest that the anion-accessible porosity fraction in the Effingen Member at Oftringen and Gösgen is around 0.5. This value is proposed as a typical average for rocks of the Effingen Member, bearing in mind that it varies on a local scale in response to the heterogeneity of lithology and pore-space architecture. The substantial uncertainties associated with the approaches to estimating anion-accessible porosity propagate into the calculated values of in-situ pore-water Cl- concentrations. On the basis of aqueous extraction experiments, and using an anion-accessible porosity fraction of 0.5, Cl- concentrations in the Effingen Member at Oftringen reach a maximum of about 14 g/L in the centre. Cl- decreases upwards and downwards from that, forming a curved depth profile. Cl- contents in the Effingen Member at Gösgen increase with depth from about 3.5 g/L to about 14 g/L at the base of the cored profile (which corresponds to the centre of the formation). Out-diffusion experiments were carried out on four samples from Oftringen, distributed through the Effingen Member. Recalculated Cl- concentrations are similar to those from aqueous extraction for 3 out of the 4 samples, and somewhat lower for one sample. Concentrations of other components, i.e. Na+, K+, Ca2+, Mg2+, Sr2+, SO42- and HCO3- cannot be obtained from the aqueous extraction and out-diffusion experimental data because of mineral dissolution and cation exchange reactions during the experiments. Pore-water pH also is not constrained by those extraction experiments. The only experimental approach to obtain complete pore-water compositions for samples from Oftringen and Gösgen is advective displacement of pore water. The sample from Oftringen used for this experiment is from 445 m depth in the upper part of the Effingen Member and gave eluate with 16.5 g/L Cl- whereas aqueous extraction from a nearby sample indicated about 9 g/L Cl-. The sample from Gösgen used for advective displacement is from 123 m depth in the centre of the Effingen Member sequence and gave eluate with about 9 g/L Cl- whereas aqueous extraction gave 11.5 g/L Cl-. In both cases the pore waters have Na-(Ca)-Cl compositions and SO42- concentrations of about 1.1 g/L. The Gösgen sample has a Br/Cl ratio similar to that of sea water, whereas this ratio is lower for the Oftringen sample. Taking account of uncertainties in the applied experimental approaches, it is reasonable to place an upper limit of ca. 20 g/L on Cl- concentration for pore water in the Effingen Member in this area. There are major discrepancies between pore-water SO42- concentrations inferred from aqueous extraction or out-diffusion experiments and those obtained from advective displacement in both the Oftringen and Gösgen cases. A general conclusion is that all or at least part of the discrepancies are attributable to perturbation of the sulphur system and enhancement of SO42- by sulphate mineral dissolution and possibly minor pyrite oxidation during aqueous extraction and out-diffusion. Therefore, data for SO42- calculated from those pore-water sampling methods are considered not to be representative of in-situ conditions. A reference pore-water composition was defined for the Effingen Member in the Jura Südfuss area. It represents the probable upper limits of Cl- contents and corresponding anion and cation concentrations that are reasonably constrained by experimental data. Except for Cl- and possibly Na+ concentrations, this composition is poorly constrained especially with respect to SO42- and Ca2+ concentrations, and pH and alkalinity. Stable isotope compositions, δ18O and δ2H, of pore waters in the Effingen Member at Oftringen plot to the right of the meteoric water line, suggesting that 18O has been enriched by water-rock exchange, which indicates that the pore waters have a long residence time. A long residence time of pore water is supported by the level of dissolved 4He that has accumulated in pore water of the Effingen Member at Oftringen. This is comparable with, or slightly higher than, the amounts of 4He in the Opalinus Clay at Benken. Ground waters were sampled from flowing zones intersected by boreholes at the three locations. The general interpretation is that pore waters and ground-water solutes may have similar origins in Mesozoic and Cenozoic brackish-marine formations waters, but ground-water solutes have been diluted rather more than pore waters by ingress of Tertiary and Quaternary meteoric waters. The available hydrochemical data for pore waters from the Effingen Member at these three locations in the Jura-Südfuss area suggest that the geochemical system evolved slowly over geological periods of time, in which diffusion was an important mechanism of solute transport. The irregularity of Cl- and δ18O profiles and spatial variability of advective ground-water flows in the Malm-Dogger system suggests that palaeohydrogeological and hydrochemical responses to changing tectonic and surface environmental conditions were complex.

RADIX: a minimal-resources rapid-access drilling system

Determining the expected age at a potential ice-core drilling site on a polar ice sheet generally depends on a combination of information from remote-sensing methods, estimates of current accumulation and modelling. This poses irreducible uncertainties in retrieving an undisturbed ice core of the desired age. Although recently perfected radar techniques will improve the picture of the ice sheet below future drilling sites, rapid prospective drillings could further increase the success of deep drilling projects. Here we design and explore a drilling system for a minimum-size rapid-access hole. The advantages of a small hole are the low demand for drilling fluid, low overall weight of the equipment, fast installing and de-installing and low costs. We show that, in theory, drilling of a 20mm hole to a depth of 3000m is possible in ~4 days. First concepts have been realized and verified in the field. Both the drill cuttings and the hole itself can be used to characterize the properties of the ice sheet and its potential to provide a trustworthy palaeo-record. A candidate drilling site could be explored in ~2 weeks, which would enable the characterization of several sites in one summer season.

Incidencia de la fertilización en amaranto : zona semiárida pampenana (Argentina)

El objetivo fue evaluar la producción y la calidad de biomasa de Amaranthus mantegazzianus Pass. cv. Don Juan, en condiciones de secano, con fertilización de NPK y agregado de urea al momento de los cortes para obtención de materia verde y posterior producción de grano. Se sembró en el Campo Experimental de la Facultad de Agronomía de la Universidad Nacional de La Pampa, Argentina, el 18/11/ 2004 en parcelas con cinco surcos distanciados 0.35 m. Se establecieron dos tratamientos: un testigo sin fertilizar y otro fertilizado con NPK (19-19-19) 50 kg ha-1 como fertilizante base y urea (100 kg ha-1) al momento del corte, en un diseño en bloques al azar con cuatro repeticiones. Las condiciones ambientales adversas solamente permitieron la realización de un corte e imposibilitaron la obtención de grano. Se midió: producción de biomasa, porcentaje de materia seca, tamaño promedio de hojas (largo x ancho), ancho promedio del tallo, largo promedio del pecíolo, número de hojas por planta cortada. Se calculó la relación lámina de la hoja/largo de pecíolo. Se determinó el contenido de proteína cruda y minerales. La fertilización realizada aumenta la relación lámina de la hoja/pecíolo. Las variables medidas y el contenido de nutrientes no presentaron diferencias significativas entre las plantas fertilizadas y sin fertilizar.

Micropropagación de vid : protocolo para variedades

Las variedades europeas han sido micropropagadas eficientemente a partir de estacas uninodales en el medio Galzy (1964) modificado; sin embargo las "criollas" no han presentado un buen crecimiento en ellos. Se trabajó con las variedades "criollas" de vid: Cereza, Criolla Chica, Criolla Grande, Pedro Giménez y Torrontés Riojano. Los medios evaluados fueron Murashige Skoog (MS) (1962) y Galzy (1964) modificado (GM), enteros o con macro y micronutrientes diluidos a la mitad, solidificados y líquidos y se emplearon dos tipos de explantos: estacas uninodales y ápices. También se probaron dos tipos de soportes para los explantos en medios líquidos. Si bien se observaron diferencias según el genotipo, en medio sólido el porcentaje de plantas crecidas no se vio afectado por el tipo de explanto utilizado en la siembra, presentando mayor crecimiento las plantas provenientes de ápices y las cultivadas en medio MS ½. Al trabajar con medios líquidos, con esponja vegetal como soporte de los explantos, las plantas no prosperaron. Con puente de papel los mejores resultados se obtuvieron cultivando ápices en medio MS ½. Los resultados sugieren que el mejor medio para icropropagar estas variedades de vid a partir de ambos tipos de explantos es MS ½ sólido.

Comparación de materiales y épocas de plantación para Populus sp. : Mendoza (Argentina)

Este ensayo tuvo como objetivo determinar el material y la época de plantación más adecuada para la instalación en sitio definitivo de un cultivo de álamos con los clones Populus euramericana Conti 12 y Populus deltoides Harvard en las condiciones ambientales de la provincia de Mendoza. La plantación se realizó en dos épocas distintas: otoño y primavera, utilizando como material de plantación en ambos casos: a. barbados: plantas con raíz y brote de 1 año (R1T1); b. plantas recepadas: plantas con raíz de 1 año y brote del año cortado a 30 cm de nivel de suelo (R1T0); c. estacas: 1.5-2.5 cm de diámetro y 30-40 cm de longitud. Los resultados se expresaron en porcentaje de plantas prendidas y en volumen de madera producida por hectárea a los siete años en cada una de las variantes. Para los materiales y condiciones del ensayo el mejor resultado fue para el clon Conti 12 plantación en otoño utilizando barbados (plantas R1T1) o plantación en primavera utilizando estacas, barbados (R1T1) o plantas recepadas (R1T0). Para el clon Harvard, plantación en primavera utilizando planta recepada (R1T0) o estacas.

Pore fluid pressure at DSDP Leg 84 Holes

Evidence of considerable overpressuring of pore fluids in the sediment drilled during Leg 84 was obtained from direct measurement of pressure by two methods. The first involved measurement of back pressure when the annulus of the drill hole became constricted with unremoved drill cuttings or constriction was caused by plastic inflow of the drill hole walls. The second involved measurement of pressure ahead of the bit in conjunction with in situ water samples and heat flow. All measurements indicated abnormally high pore pressure even in slope deposits of the Middle America Trench off Guatemala.

Micropropagación de la enredadera nativa Mutisia subspinosa Cav.

La especie nativa Mutisia subspinosa es una enredadera perenne, resistente a heladas, con hermosas flores anaranjadas que presenta gran interés como ornamental. En trabajos previos de propagación a través de semillas o estacas se obtuvieron escasos resultados, lo que justificó el uso de la micropropagación. Para el establecimiento in vitro se utilizó el medio de Murashige Skoog (MS) diluido a la mitad. Se evaluó la adición de 6-bencilaminopurina (BAP) sola o en combinación con thidiazurón (TDZ) y un testigo sin hormonas. En la etapa de multiplicación se utilizó el mismo medio basal y se probaron dos auxinas: los ácidos indol butírico (AIB) y naftalén acético (ANA), además del uso de carbón activado. La composición del medio de cultivo más adecuada para el establecimiento fue la del testigo, mientras que para la multiplicación los mejores resultados se obtuvieron con la adición de 4 μmoles.L-1 de ANA. El agregado de 1 g.L-1 de carbón activado al medio de cultivo con 2,7 μmoles.L-1 mejoró la tasa de multiplicación y el enraizamiento.

Efecto del régimen de riego en el rendimiento de alfalfa para corte en el Valle Central de Catamarca, Argentina

En la provincia de Catamarca existe una gran superficie cultivada con alfalfa bajo riego. La falta de conocimiento de los requerimientos hídricos del cultivo en esta zona es un grave inconveniente. Con el objeto de subsanar este problema, se realizó en el Valle Central un ensayo de riego con un diseño en bloques completamente al azar, con cuatro tratamientos y cuatro repeticiones. Los tratamientos consistieron en la reposición de humedad al suelo a distintos umbrales: 75, 50, 25 y 0% de la capacidad de almacenamiento total de agua del suelo. Se evaluó la producción de materia seca en cada tratamiento durante siete cortes. Los resultados mostraron que al regar con un umbral del 75 o del 50% se obtienen rendimientos promedio similares de materia seca: 25.674,4 kg.ha-1.año-1 y 24.215,4 kg.ha-1.año-1 respectivamente. El trabajo muestra que hay diferencias significativas (p < 0,0001) entre las medias de estos tratamientos con respecto a los otros dos, que tienen rendimientos inferiores: 16.366,7 kg.ha-1.año-1 para el umbral de riego del 25% y de 9.970,9 kg.ha-1.año-1 para un umbral del 0%. Se concluyó que la producción del cultivo disminuye considerablemente con intervalos de riego muy prolongados.

Element oxides in basaltic glass fragments from ODP Hole 203-1243B

Sand-sized basaltic glass fragments were recovered in the liner of Core 203-1243B-19R, the deepest recovery from Hole 1243B. Microprobe analysis of 582 glassy cuttings cluster into five compositionally distinct groups, most of which are unlike the lithologic units described on board ship. Drilling operations intended to sweep cuttings from the caving hole and differences between the cuttings and geochemically distinct lithologic units of the upper part of the basement indicate that the cuttings came mainly, if not entirely, from the lower part of the hole. They give information about the part of Hole 1243B that had poor core recovery. Enriched mid-ocean-ridge basalt (MORB) from the upper part of the hole and transitional MORB from two groups of cuttings from sources low in the hole may be a trace of the Galápagos plume on the Pacific plate or may be a normal consequence of eruptions from two distinct magmas on fast-spreading crust.

Impact studies from different factors on root development from Stevia rebaudiana bertoni

The demand for an alternative and a high potency sweetener to substitute sugar increases year in year out, more so as a high percentage of the world population becomes increasingly diabetic. The alternative natural sweetener at hand has been Stevia rebaudiana Bertoni, a plant species, native to Paraguay and a member of the family compositae. Stevia is usually propagated by stem cuttings due to low percentage (10 %) seed germination, thus limiting large scales cultivation. To cultivate this crop en mass therefore, there is need to evolve efficient rooting techniques. Influences of irradiation from light, and hormones on rooting have been reported. The rooting efficacy in stem cuttings of this crop under varying light wavelengths, dark and hormone factors was investigated. Evaluated parameters include- (i) day of root emergent, (ii) percentage of rooted cuttings, (iii) average number, (iv) length and (v) width, of roots. Analysis of variance at p<.05 revealed that the number, length and width, of roots differed significantly in each case at p<0.000. Light irradiation was highly effective and a necessary factor for rooting in stems cuttings of this crop. The red light-IBA combined factors served best in stem micro-cutting practice and facilitation of effective mass cultivation in stevia crop.