Introducción

Sexualidad y Escritura (1850-2000) is a collection of thirteen essays which focus on the complex relationship between gender and writing in Spain from 1850 to 2000. This collection aims to provide a specifically Spanish cultural and historical context to the study of gender and writing and to challenge the effectiveness and validity of applying and adapting some feminist theory (based mainly in French and Anglo literary traditions) to works by both male and female Spanish writers. The introduction sets the tone of the essays it contains by discussing the Gilbert and Guar’s concept of female authors anxiety of authorship, and the reasons why their notions of the male dominated writing profession does not necessarily apply to Spanish literature of the nineteenth century in particular. The notable presence and success of female writers during the Romantic period and the way in which they in effect managed to feminize the writing profession illustrates how very different the Spanish literary context is from French, English or American models. The editors state that, rather than needing to work up the courage to take up the pen and publish their works, the issue facing Spanish women writers during parts of the last 150 years has been how to either maintain or regain their authorial voice and their place in letters, fighting to keep their heads above the rising and falling tides of literary trends.

Computer control of chemical process plants with special reference to distillation

A sieve plate distillation column has been constructed and interfaced to a minicomputer with the necessary instrumentation for dynamic, estimation and control studies with special bearing on low-cost and noise-free instrumentation. A dynamic simulation of the column with a binary liquid system has been compiled using deterministic models that include fluid dynamics via Brambilla's equation for tray liquid holdup calculations. The simulation predictions have been tested experimentally under steady-state and transient conditions. The simulator's predictions of the tray temperatures have shown reasonably close agreement with the measured values under steady-state conditions and in the face of a step change in the feed rate. A method of extending linear filtering theory to highly nonlinear systems with very nonlinear measurement functional relationships has been proposed and tested by simulation on binary distillation. The simulation results have proved that the proposed methodology can overcome the typical instability problems associated with the Kalman filters. Three extended Kalman filters have been formulated and tested by simulation. The filters have been used to refine a much simplified model sequentially and to estimate parameters such as the unmeasured feed composition using information from the column simulation. It is first assumed that corrupted tray composition measurements are made available to the filter and then corrupted tray temperature measurements are accessed instead. The simulation results have demonstrated the powerful capability of the Kalman filters to overcome the typical hardware problems associated with the operation of on-line analyzers in relation to distillation dynamics and control by, in effect, replacirig them. A method of implementing estimator-aided feedforward (EAFF) control schemes has been proposed and tested by simulation on binary distillation. The results have shown that the EAFF scheme provides much better control and energy conservation than the conventional feedback temperature control in the face of a sustained step change in the feed rate or multiple changes in the feed rate, composition and temperature. Further extensions of this work are recommended as regards simulation, estimation and EAFF control.

The vibrational spectra of rectangular plates

The wire drive pulse-echo system has been extensively used to excite and measure modes of vibration of thin rectangular plates. The frequency spectra of different modes have been investigated as a function of the material elastic moduli and the plate geometry. Most of the work was carried out on isotropic materials. For square plates a wide selection of materials were used. These were made isotropic in their in-plane dimensions where the displacements are taking place. The range of rnaterials enabled the dependence on Poisson's ratio to be investigated. A method of determining the value of Poisson's ratio resulted from this investigation. Certain modes are controlled principally by the shear modulus. Of these the fundamental has two nodal lines across the plate surface. One of them, which has nodes at the corners, (the Lame mode) is uniquely a pure shear mode where the diagonal is a full wave length. One controlled by the Young's modulus has been found. The precise harmonic relationship of the Lame mode series in square and rectangular plates was established. Use of the Rayleigh-Lamb equation has extended the theoretical support. The low order modes were followed over a wide range of sides ratios. Two fundamental types of modes have been recognised; These are the longitudinal modes where the frequency is controlled by the length of the plate only and the 2~f product has an asymptotic value approaching the rod velocity. The other type is the in-plane flexural modes (in effect a flexurally vibrating bar where the -2/w is the geometrical parameter). Where possible the experimental work was related to theory. Other modes controlled by the width dimension of the plate were followed. Anisotropic materials having rolled sheet elastic symmetry were investigated in terms of the appropriate theory. The work has been extended to examine materials from welds in steel plates.

Vibrational methods applied to NDT testing and fluid density measurement

A system for the NDI' testing of the integrity of conposite materials and of adhesive bonds has been developed to meet industrial requirements. The vibration techniques used were found to be applicable to the development of fluid measuring transducers. The vibrational spectra of thin rectangular bars were used for the NDT work. A machined cut in a bar had a significant effect on the spectrum but a genuine crack gave an unambiguous response at high amplitudes. This was the generation of fretting crack noise at frequencies far above that of the drive. A specially designed vibrational decrement meter which, in effect, measures mechanical energy loss enabled a numerical classification of material adhesion to be obtained. This was used to study bars which had been flame or plasma sprayed with a variety of materials. It has become a useful tool in optimising coating methods. A direct industrial application was to classify piston rings of high performance I.C. engines. Each consists of a cast iron ring with a channel into which molybdenum, a good bearing surface, is sprayed. The NDT classification agreed quite well with the destructive test normally used. The techniques and equipment used for the NOT work were applied to the development of the tuning fork transducers investigated by Hassan into commercial density and viscosity devices. Using narrowly spaced, large area tines a thin lamina of fluid is trapped between them. It stores a large fraction of the vibrational energy which, acting as an inertia load reduces the frequency. Magnetostrictive and piezoelectric effects together or in combination enable the fork to be operated through a flange. This allows it to be used in pipeline or 'dipstick' applications. Using a different tine geometry the viscosity loading can be predoninant. This as well as the signal decrement of the density transducer makes a practical viscometer.

Investigation of some critical aspects of on-line surface measurement by a wavelength-division-multiplexing technique

Some critical aspects of a new kind of on-line measurement technique for micro and nanoscale surface measurements are described. This attempts to use spatial light-wave scanning to replace mechanical stylus scanning, and an optical fibre interferometer to replace optically bulky interferometers for measuring the surfaces. The basic principle is based on measuring the phase shift of a reflected optical signal. Wavelength-division-multiplexing and fibre Bragg grating techniques are used to carry out wavelength-to-field transformation and phase-to-depth detection, allowing a large dynamic measurement ratio (range/resolution) and high signal-to-noise ratio with remote access. In effect the paper consists of two parts: multiplexed fibre interferometry and remote on-machine surface detection sensor (an optical dispersive probe). This paper aims to investigate the metrology properties of a multiplexed fibre interferometer and to verify its feasibility by both theoretical and experimental studies. Two types of optical probes, using a dispersive prism and a blazed grating, respectively, are introduced to realize wavelength-to-spatial scanning.

Moving from HRM to knowledge productivity:a study of whether and how organizations become learning organizations

Practitioners and academics are in broad agreement that, above all, organizations need to be able to learn, to innovate and to question existing ways of working. This thesis develops a model to take into account, firstly, what determines whether or not organizations endorse practices designed to facilitate learning. Secondly, the model evaluates the impact of such practices upon organizational outcomes, measured in terms of products and technological innovation. Researchers have noted that organizations that are committed to producing innovation show great resilience in dealing with adverse business conditions (e.g. Pavitt, 1991; Leonard Barton, 1998). In effect, such organizations bear many of the characteristics associated with the achievement of ‘learning organization’ status (Garvin, 1993; Pedler, Burgoyne & Boydell, 1999; Senge, 1990). Seven studies are presented to support this theoretical framework. The first empirical study explores the antecedents to effective learning. The three following studies present data to suggest that people management practices are highly significant in determining whether or not organizations are able to produce sustained innovation. The thesis goes on to explore the relationship between organizational-level job satisfaction, learning and innovation, and provides evidence to suggest that there is a strong, positive relationship between these variables. The final two chapters analyze learning and innovation within two similar manufacturing organizations. One manifests relatively low levels of innovation whilst the other is generally considered to be outstandingly innovative. I present the comparative framework for exploring the different approaches to learning manifested by the two organizations. The thesis concludes by assessing the extent to which the theoretical model presented in the second chapter is borne out by the findings of the study. Whilst this is a relatively new field of inquiry, findings reveal that organizations have a much stronger chance of producing sustained innovation where they manage people proactively where people process themselves to be satisfied at work. Few studies to date have presented empirical evidence to substantiate theoretical endorsements to engage in higher order learning, so this research makes an important contribution to existing literature in this field.

Mechanical properties of sheet metal under forming conditions

In the bulge test, a sheet metal specimen is clamped over a circular hole in a die and formed into a bulge by the hydraulic pressure on one side of the specirnen. As the unsupported part of the specimen is deformed in this way, its area is increased, in other words, the material is generally stretched and its thickness generally decreased. The stresses causing this stretching action are the membrane stresses in the shell generated by the hydraulic pressure, in the same way as the rubber in a toy balloon is stretched by the membrane stresses caused by the air inside it. The bulge test is a widely used sheet metal test, to determine the "formability" of sheet materials. Research on this forming process (2)-(15)* has hitherto been almost exclusively confined to predicting the behaviour of the bulged specimen through the constitutive equations (stresses and strains in relation to displacements and shapes) and empirical work hardening characteristics of the material as determined in the tension test. In the present study the approach is reversed; the stresses and strains in the specimen are measured and determined from the geometry of the deformed shell. Thus, the bulge test can be used for determining the stress-strain relationship in the material under actual conditions in sheet metal forming processes. When sheet materials are formed by fluid pressure, the work-piece assumes an approximately spherical shape, The exact nature and magnitude of the deviation from the perfect sphere can be defined and measured by an index called prolateness. The distribution of prolateness throughout the workpiece at any particular stage of the forming process is of fundamental significance, because it determines the variation of the stress ratio on which the mode of deformation depends. It is found. that, before the process becomes unstable in sheet metal, the workpiece is exactly spherical only at the pole and at an annular ring. Between the pole and this annular ring the workpiece is more pointed than a sphere, and outside this ring, it is flatter than a sphere. In the forming of sheet materials, the stresses and hence the incremental strains, are closely related to the curvatures of the workpiece. This relationship between geometry and state of stress can be formulated quantitatively through prolateness. The determination of the magnitudes of prolateness, however, requires special techniques. The success of the experimental work is due to the technique of measuring the profile inclination of the meridional section very accurately. A travelling microscope, workshop protractor and surface plate are used for measurements of circumferential and meridional tangential strains. The curvatures can be calculated from geometry. If, however, the shape of the workpiece is expressed in terms of the current radial (r) and axial ( L) coordinates, it is very difficult to calculate the curvatures within an adequate degree of accuracy, owing to the double differentiation involved. In this project, a first differentiation is, in effect, by-passed by measuring the profile inclination directly and the second differentiation is performed in a round-about way, as explained in later chapters. The variations of the stresses in the workpiece thus observed have not, to the knowledge of the author, been reported experimentally. The static strength of shells to withstand fluid pressure and their buckling strength under concentrated loads, both depend on the distribution of the thickness. Thickness distribution can be controlled to a limited extent by changing the work hardening characteristics of the work material and by imposing constraints. A technique is provided in this thesis for determining accurately the stress distribution, on which the strains associated with thinning depend. Whether a problem of controlled thickness distribution is tackled by theory, or by experiments, or by both combined, the analysis in this thesis supplies the theoretical framework and some useful experimental techniques for the research applied to particular problems. The improvement of formability by allowing draw-in can also be analysed with the same theoretical and experimental techniques. Results on stress-strain relationships are usually represented by single stress-strain curves plotted either between one stress and one strain (as in the tension or compression tests) or between the effective stress and effective strain, as in tests on tubular specimens under combined tension, torsion and internal pressure. In this study, the triaxial stresses and strains are plotted simultaneously in triangular coordinates. Thus, both stress and strain are represented by vectors and the relationship between them by the relationship between two vector functions. From the results so obtained, conclusions are drawn on both the behaviour and the properties of the material in the bulge test. The stress ratios are generally equal to the strain-rate ratios (stress vectors collinear with incremental strain vectors) and the work-hardening characteristics, which apply only to the particular strain paths are deduced. Plastic instability of the material is generally considered to have been reached when the oil pressure has attained its maximum value so that further deformation occurs under a constant or lower pressure. It is found that the instability regime of deformation has already occurred long before the maximum pressure is attained. Thus, a new concept of instability is proposed, and for this criterion, instability can occur for any type of pressure growth curves.

Multinational firms, productivity and employment

Over the last three decades foreign direct investment (FDI) has become the most visible driver of globalisation. It has grown faster than world output and international trade and now reports world annual flows exceeding 1,000 billion US dollars. In this period, Germany has undergone significant changes in order to play an important role in the globalisation process. Apart from being a member state of the European Union (EU) whose key feature is the free flow of trade, investment and labour, the re-unification of East and West Germany in 1990 has been a significant development. This in effect has meant that East Germany as well as other Eastern European nations opened up to foreign investment for the first time. In this period, Germany has attracted in excess of 10 per cent of inward FDI into the EU and invested around 15 per cent of all FDI in the EU. This thesis explores empirically the potential impact of FDI on firms operating in and investing from Germany over a ten year period. Using panel data at the firm-level it concentrates on three areas relating to FDI. Firstly, it considers whether foreign-owned firms are more productive than German multinational firms and German non-multinational firms. Secondly, the thesis considers the impact of German investments abroad on domestic productivity. Finally, employment effects emanating from outward high-tech FDI are estimated for the leading OECD (Organisation of Economic Co-operation and Development) countries, namely Germany, Belgium, France, the Netherlands, Sweden, the United Kingdom and Japan. The findings of the first analysis indicate that while foreign-owned firms are generally more productive than German non-multinationals, there is no clear cut difference between foreign-owned firms and German multinationals. These differences would not have been uncovered, had the analysis compared foreign firms with all domestic firms. Equally, location within Germany is also important, as this productivity gap is more pronounced for firms which are located in the Eastern states. The findings of the second analysis suggest that engaging in outward FDI has an overall positive effect on the parent firm's productivity at home. Finally, results of the third analysis show that an expansion of high-tech offshoring activities by OECD multinationals (MNEs) is not associated with any reduction in employment at home.

Assessing the efficacy of structural merger remedies:choosing between theories of harm?

Previous empirical assessments of the effectiveness of structural merger remedies have focused mainly on the subsequent viability of the divested assets. Here, we take a different approach by examining how competitive are the market structures which result from the divestments. We employ a tightly specified sample of markets in which the European Commission (EC) has imposed structural merger remedies. It has two key features: (i) it includes all mergers in which the EC appears to have seriously considered, simultaneously, the possibility of collective dominance, as well as single dominance; (ii) in a previous paper, for the same sample, we estimated a model which proved very successful in predicting the Commission’s merger decisions, in terms of the market shares of the leading firms. The former allows us to explore the choices between alternative theories of harm, and the latter provides a yardstick for evaluating whether markets are competitive or not – at least in the eyes of the Commission. Running the hypothetical post-remedy market shares through the model, we can predict whether the EC would have judged the markets concerned to be competitive, had they been the result of a merger rather than a remedy. We find that a significant proportion were not competitive in this sense. One explanation is that the EC has simply been inconsistent – using different criteria for assessing remedies from those for assessing the mergers in the first place. However, a more sympathetic – and in our opinion, more likely – explanation is that the Commission is severely constrained by the pre-merger market structures in many markets. We show that, typically, divestment remedies return the market to the same structure as existed before the proposed merger. Indeed, one can argue that any competition authority should never do more than this. Crucially, however, we find that this pre-merger structure is often itself not competitive. We also observe an analogous picture in a number of markets where the Commission chose not to intervene: while the post-merger structure was not competitive, nor was the pre-merger structure. In those cases, however, the Commission preferred the former to the latter. In effect, in both scenarios, the EC was faced with a no-win decision. This immediately raises a follow-up question: why did the EC intervene for some, but not for others – given that in all these cases, some sort of anticompetitive structure would prevail? We show that, in this sample at least, the answer is often tied to the prospective rank of the merged firm post-merger. In particular, in those markets where the merged firm would not be the largest post-merger, we find a reluctance to intervene even where the resulting market structure is likely to be conducive to collective dominance. We explain this by a willingness to tolerate an outcome which may be conducive to tacit collusion if the alternative is the possibility of an enhanced position of single dominance by the market leader. Finally, because the sample is confined to cases brought under the ‘old’ EC Merger Regulation, we go on to consider how, if at all, these conclusions require qualification following the 2004 revisions, which, amongst other things, made interventions for non-coordinated behaviour possible without requiring that the merged firm be a dominant market leader. Our main conclusions here are that the Commission appears to have been less inclined to intervene in general, but particularly for Collective Dominance (or ‘coordinated effects’ as it is now known in Europe as well as the US.) Moreover, perhaps contrary to expectation, where the merged firm is #2, the Commission has to date rarely made a unilateral effects decision and never made a coordinated effects decision.

Investigation of some critical aspects of on-line surface measurement by a wavelength-division-multiplexing technique

Some critical aspects of a new kind of on-line measurement technique for micro and nanoscale surface measurements are described. This attempts to use spatial light-wave scanning to replace mechanical stylus scanning, and an optical fibre interferometer to replace optically bulky interferometers for measuring the surfaces. The basic principle is based on measuring the phase shift of a reflected optical signal. Wavelength-division-multiplexing and fibre Bragg grating techniques are used to carry out wavelength-to-field transformation and phase-to-depth detection, allowing a large dynamic measurement ratio (range/resolution) and high signal-to-noise ratio with remote access. In effect the paper consists of two parts: multiplexed fibre interferometry and remote on-machine surface detection sensor (an optical dispersive probe). This paper aims to investigate the metrology properties of a multiplexed fibre interferometer and to verify its feasibility by both theoretical and experimental studies. Two types of optical probes, using a dispersive prism and a blazed grating, respectively, are introduced to realize wavelength-to-spatial scanning.

Implications of query caching for JXTA peers

This dissertation studies the caching of queries and how to cache in an efficient way, so that retrieving previously accessed data does not need any intermediary nodes between the data-source peer and the querying peer in super-peer P2P network. A precise algorithm was devised that demonstrated how queries can be deconstructed to provide greater flexibility for reusing their constituent elements. It showed how subsequent queries can make use of more than one previous query and any part of those queries to reconstruct direct data communication with one or more source peers that have supplied data previously. In effect, a new query can search and exploit the entire cached list of queries to construct the list of the data locations it requires that might match any locations previously accessed. The new method increases the likelihood of repeat queries being able to reuse earlier queries and provides a viable way of by-passing shared data indexes in structured networks. It could also increase the efficiency of unstructured networks by reducing traffic and the propensity for network flooding. In addition, performance evaluation for predicting query routing performance by using a UML sequence diagram is introduced. This new method of performance evaluation provides designers with information about when it is most beneficial to use caching and how the peer connections can optimize its exploitation.

Co-owners and severance - determining beneficial entitlement after Stack

The article seeks to examine the effect of a severance of a joint beneficial title following the House of Lords' ruling in Stack v Dowden [2007] 2 AC 432. If, under Stack, the parties' beneficial interests fall to be treated as identical to their legal interests (in effect, giving rise to a joint tenancy both at law and in equity), how does the mechanism of severance of a joint beneficial tenancy actually operate so as to give rise to separate and unequal shares where the parties' common intention has changed by virtue of post-acquisition events? The question is examined by reference to an ambulatory and new constructive trust, as well as where the parties have entered into an express declaration of trust of their beneficial interests.

Conclusion : on multiple levels of analysis, context, contingency and capital

In this concluding chapter, we bring together the threads and reflections on the chapters contained in this text and show how they relate to multi-level issues. The book has focused on the world of Human Resource Management (HRM) and the systems and practices it must put in place to foster innovation. Many of the contributions argue that in order to bring innovation about, organisations have to think carefully about the way in which they will integrate what is, in practice, organisationally relevant — but socially distributed — knowledge. They need to build a series of knowledge-intensive activities and networks, both within their own boundaries and across other important external inter-relationships. In so doing, they help to co-ordinate important information structures. They have, in effect, to find ways of enabling people to collaborate with each other at lower cost, by reducing both the costs of their co-ordination and the levels of unproductive search activity. They have to engineer these behaviours by reducing the risks for people that might be associated with incorrect ideas and help individuals, teams and business units to advance incomplete ideas that are so often difficult to codify. In short, a range of intangible assets must flow more rapidly throughout the organisation and an appropriate balance must be found between the rewards and incentives associated with creativity, novelty and innovation, versus the risks that innovation may also bring.

Fiscal and organizational determinants of transportation outcomes: A quantitative and qualitative analysis of sustainability factors

Federal transportation legislation in effect since 1991 was examined to determine outcomes in two areas: (1) The effect of organizational and fiscal structures on the implementation of multimodal transportation infrastructure, and (2) The effect of multimodal transportation infrastructure on sustainability. Triangulation of methods was employed through qualitative analysis (including key informant interviews, focus groups and case studies), as well as quantitative analysis (including one-sample t-tests, regression analysis and factor analysis). ^ Four hypotheses were directly tested: (1) Regions with consolidated government structures will build more multimodal transportation miles: The results of the qualitative analysis do not lend support while the results of the quantitative findings support this hypothesis, possibly due to differences in the definitions of agencies/jurisdictions between the two methods. (2) Regions in which more locally dedicated or flexed funding is applied to the transportation system will build a greater number of multimodal transportation miles: Both quantitative and qualitative research clearly support this hypothesis. (3) Cooperation and coordination, or, conversely, competition will determine the number of multimodal transportation miles: Participants tended to agree that cooperation, coordination and leadership are imperative to achieving transportation goals and objectives, including targeted multimodal miles, but also stressed the importance of political and financial elements in determining what ultimately will be funded and implemented. (4) The modal outcomes of transportation systems will affect the overall health of a region in terms of sustainability/quality of life indicators: Both the qualitative and the quantitative analyses provide evidence that they do. ^ This study finds that federal legislation has had an effect on the modal outcomes of transportation infrastructure and that there are links between these modal outcomes and the sustainability of a region. It is recommended that agencies further consider consolidation and strengthen cooperation efforts and that fiscal regulations are modified to reflect the problems cited in qualitative analysis. Limitations of this legislation especially include the inability to measure sustainability; several measures are recommended. ^

The influence of HOPE VI public housing on public schools

In the United States, public school enrollment is typically organized by neighborhood boundaries. This dissertation examines whether the federally funded HOPE VI program influenced performance in neighborhood public schools. In effect since 1992, HOPE VI has sought to revitalize distressed public housing using the New Urbanism model of mixed income communities. There are 165 such HOPE VI projects nationwide. Despite nearly two decades of the program's implementation, the literature on its connection to public school performance is thin. My dissertation aims to narrow this research gap. There are three principal research questions: (1) Following HOPE VI, was there a change in socioeconomic status (SES) in the neighborhood public school? The hypothesis is that low SES (measured as the proportion of students qualifying for the Free and Reduced Lunch Program) would reduce. (2) Following HOPE VI, did the performance of neighborhood public schools change? The hypothesis is that the school performance, measured by the proportion of 5th grade students proficient in state wide math and reading tests, would increase. (3) What factors relate to the performance of public schools in HOPE VI communities? The focus is on non-school, neighborhood factors that influence the public school performance. For answering the first two questions, I used t-tests and regression models to test the hypotheses. The analysis shows that there is no statistically significant change in SES following HOPE VI. However, there are statistically significant increases in performance for reading and math proficiency. The results are interesting in indicating that HOPE VI neighborhood improvement may have some relationship with improving school performance. To answer the third question, I conducted a case study analysis of two HOPE VI neighborhood public schools, one which improved significantly (in Philadelphia) and one which declined the most (in Washington DC). The analysis revealed three insights into neighborhood factors for improved school performance: (i) a strong local community organization; (ii) local community's commitment (including the middle income families) to send children to the public school; and (iii) ties between housing and education officials to implement the federal housing program. In essence, the study reveals how housing policy is de facto education policy.