1969 ASSESSMENT OF BLACKBIRD DEPREDATIONS ON FIELD CORN IN OHIO AND MICHIGAN

In 1966, when the annual damage survey was initiated, Dr. C. R. Weaver, Statistician at the Ohio Agriculture Research and Development Center, Wooster, Ohio, drew up a sampling plan, balancing costs against desired precision. The plan included three combinations of fields to be sampled and stations per field for high damage areas, three combinations for moderate damage areas, and two combinations for light damage areas. Alternatives for the high damage area included (1) 497 fields with two stations per field (± .48), (2) 775 fields with two stations per field (± .26), and (3) 235 fields with ten stations per field (— .68). For the moderate damage areas, the alternatives were (1) 441 fields with three stations per field (± .26), (2) 155 fields with three stations per field (± .50), and (3) 235 fields with ten stations per field (± .32). The light dam¬age area alternatives were (1) 297 fields with three stations per field (- .26), and (2) 81 fields with three stations per field (± .50). The original survey in 1966 sampled eight counties in three regions. In 1967, 14 counties in the same three regions were sampled. Two new counties were added to one region and two new regions with two counties each (treated as one region for sampling purposes) were added to the 1968 survey. The 1968 survey was of sufficient size to be representative of the corn damage picture in Ohio and Southeast Michigan. The 1969 survey was identical to the 1968 survey.

Interaction between toxigenic fungi and weevils in corn grain samples

This study investigated the ability of weevils to transmit Aspergillus flavus and Fusarium verticillioides fungal spores and the consequent production of mycotoxins. For this purpose, corn grain samples were stored in flasks connected to a hose to form a closed system (flasks A and B). Flasks A were inoculated with the following groups: group 1 (corn + weevil); group 2 (corn + A. flavus); group 3 (corn + A. flavus + weevil); group 4 (corn + F. verticillioides); group 5 (corn + E verticillioides + weevil), and group 6 (corn + A. flavus + E verticillioides + weevil). Flasks B contained sterile grains. The samples were incubated for 10, 20 and 30 days, posteriorly, weight, water activity, mycoflora, aflatoxins and fumonisins. The corn grain samples were also submitted to scanning electron microscopy. Our results showed that weevils could enhance corn grains contamination by these fungi, hence, could increase mycotoxins production. These findings demonstrate the importance of weevils as fungal vectors and the need for good manipulation and storage practices of grains. (C) 2012 Elsevier Ltd. All rights reserved.

Phosphorus utilization by corn as affected by green manure, nitrogen and phosphorus fertilizers

The objective of this work was to evaluate the utilization by corn plants of P from triple superphosphate fertilizer labeled with P-32 (P-32-TSP), and of P from soil as affected by N rates and by the green manures (GM) sunn hemp (Crotalaria juncea) and millet (Pennisetum glaucum). The experiment was carried out using pots filled with 5 kg Oxisol (Rhodic Hapludox). A completely randomized design was used, in a 4x4x2 factorial arrangement, with four replicates. The treatments were: four P rates as TSP (0, 0.175, 0.350, and 0.700 g P per pot); four N rates as urea (0, 0.75, 1.50, and 2.25 g N per pot); and sunn hemp or millet as green manure. The additions of N and P by the GM were taken into account. After grain physiologic maturation, corn dry matter, P contents, accumulated P, and P recovery in the different treatments were measured. P-32-TSP recovery by corn increased with N increasing rates, and decreased with increasing rates of P-32-TSP. The mineral fertilizer provides most of the accumulated P by corn plants. The recovery of P-32-TSP by corn was 13.12% in average. The green manure species influence the assimilation of P-32-TSP by the plants.

Synthesis of carbon nanomaterials from corn waste (DDGS)

Syntesis of carbon nanomaterials from corn waste (DDGS). The world's largest ethanol producer (USA) uses corn as feedstock. DDGS (distillers dried grains with solubles) is the main waste generated from this process (around 32 million t/year). DDGS samples were pyrolyzed at 1000 degrees C in a furnace with controlled atmosphere. The effluent was channeled to a second furnace, in which catalyst substrates were placed. Chromatographic analysis was used to evaluate the gaseous effluents, showing that the catalyst reduced hydrocarbon emissions. The solid products formed were analyzed by SEM and TEM. Graphitic structures and carbon nanofibers, 50 mu m in length and with diameters of 80-200 nm, were formed.

Anaemia in pregnant women before and after the mandatory fortification of wheat and corn flours with iron

Objective: To estimate the frequency of anaemia in pregnant women before and after the fortification of flours with Fe. Design: Retrospective study developed from secondary data obtained from medical records. Setting: Two health units in Rio de Janeiro, Brazil. Subjects: Socio-economic, demographic, obstetric and Hb concentration data were collected of 778 pregnant women attending prenatal care. Two study groups were created: the first referred to the period before fortification (G1, n 391), including women whose parturition happened before June 2004; and the second referred to the period after fortification (G2, n 387), including women whose last menstrual cycle happened after June 2005. The Hb cut-off point adopted for anaemia diagnosis was <11.0 g/dl. Results: In linear regression models, when Hb concentration was expressed as a dependent variable, women in G2 presented Hb concentration 0.26 g/dl and 0.36 g/dl higher during the second and third trimesters of pregnancy, respectively, compared with G1. In logistic regression models where the dependent variable was anaemia during the second and third trimesters, it was verified that being a member of G2 was a protective factor against anaemia in the third trimester. Regarding the presence of anaemia at any gestational moment, it was verified that being a member of G2 represented a protective factor against anaemia during pregnancy. Conclusions: Results indicate the protective effect of the fortification of flours with Fe in the fight against gestational anaemia, contributing to prevention and control of this nutritional disorder among pregnant women.

Diurnal and nocturnal herbivore induction on maize elicit different innate response of the fall armyworm parasitoid, Campoletis flavicincta

Herbivore-attacked plants produce specific volatile substances that represent important cues for host finding by natural enemies. The fall armyworm Spodoptera frugiperda (J.E. Smith) (Lepidoptera: Noctuidae) is a voracious herbivore and usually feed on maize in all periods of the day. Given that plant needs light to synthesize de novo herbivore-induced volatiles, volatile blend may be changed depending on time of the day the plant is induced, what could interfere in natural enemy foraging. In this sense, the current study aimed to investigate differential attractiveness of maize elicited by fall armyworm regurgitant under light and dark conditions to its specialist larval parasitoid Campoletis flavicincta (Ashmead) (Hymenoptera: Ichneumonidae). All bioassays were conducted in Y-tube olfactometer to assess parasitoid response to odors from undamaged maize, mechanical damage, and regurgitant-treated plants at 0-1, 5-6, and 24-25 h after induction. The results showed that na < ve wasps were attracted to volatiles emitted by nocturnal regurgitant-treated maize at 5-6 h, but not to odors from diurnal regurgitant-treated plants. The differential attractiveness is likely due to blend composition as nocturnal regurgitant-treated plants emit aromatic compounds and the homoterpene (3E)-4,8-dimethyl-1,3,7-nonatriene in larger amounts than diurnal-treated plants.

Characterization of aflatoxigenic and non-aflatoxigenic strains of Aspergillus section Flavi isolated from corn grains of different geographic origins in Brazil

Aflatoxins can cause great economic losses and serious risks to humans and animals health. The largest aflatoxin producers belong to Aspergillus section Flavi and can occur naturally in food commodities. Studies showed that molecular tools as well as the type of sclerotia produced by the strains could be helpful for identification of Aspergillus species and could be correlated with levels of toxin production. The purpose of this work was to characterize the genetic diversity using AFLP technique, the type of sclerotia and the ability of aflatoxin production by isolated strains from corn of different origins in Brazil, and to verify whether qPCR based on aflR and aflP genes is appropriate for estimating the level of aflatoxin production. All the 75 strains were classified as A. flavus and the AFLP technique showed a wide intraspecific variability within them. Regarding sclerotia production, 34% were classified as S and 66% as L type. Among the aflatoxin-producers, 52.8% produced aflatoxin B-1, while 47.2% aflatoxins B-1 and B-2. Statistical analysis showed no correlation between sclerotia production and aflatoxigenicty, and no correlation between the phylogenetic clusters and aflatoxin production. Concerning the relative expression of aflR and aflP, Pearson's correlation test demonstrated low positive correlation between the expression of the aflR and aflP genes and the production of AFB(1) and AFB(2), but showed high positive correlation between aflR and aflP expression. In contrast to the other reference strains, A. oryzae ATCC 7282 showed no amplification of aflR and aflP. The results highlight the need for detection of reliable and reproducible markers with a high positive correlation with aflatoxin production.

The effects of extrusion conditions and the addition of volatile compounds and flavour enhancers to corn grits on the retention of the volatile compounds and texture of the extrudates

Corn grits that were supplemented with isovaleraldehyde, ethyl butyrate, butyric acid and flavour enhancers were extruded under different processing conditions. Volatile compounds retained in the extrudates were isolated by dynamic headspace and analysed using gas chromatographymass spectrometry. The expansion ratio, density and cut force to break down the extrudates were evaluated and aroma intensity was assessed using a multisample difference test. Butyric acid showed the greatest retention (96.4%), regardless of the extrusion conditions. All compounds were better retained when samples were extruded at 20% feed moisture and 90 degrees C processing temperature (2.981.0%), conditions that also resulted in greater aromatic intensity (moderate to moderate-strong intensity). The addition of volatile compounds reduced the expansion ratio and cut force, whereas the addition of flavour enhancers increased the expansion ratio but reduced ethyl butyrate and butyric acid retention.

Development of corn and flaxseed snacks with high-fibre content using response surface methodology (RSM)

With the increasing emphasis on health and well-being, nutrition aspects need to be incorporated as a dimension of product development. Thus, the production of a high-fibre content snack food from a mixture of corn and flaxseed flours was optimized by response surface methodology. The independent variables considered in this study were: feed moisture, process temperature and flaxseed flour addition, as they were found to significantly impact the resultant product. These variables were studied according to a rotatable composite design matrix (-1.68, -1, 0, 1, 1.68). Response variable was the expansion ratio since it has been highly correlated with acceptability. The optimum corn-flaxseed snack obtained presented a sevenfold increase in dietary fibre, almost 100% increase in protein content compared to the pure corn snack, and yielded an acceptability score of 6.93. This acceptability score was similar to those observed for corn snack brands in the market, indicating the potential commercial use of this new product, which can help to increase the daily consumption of dietary fibre.

Response surface methodology (RSM) to evaluate moisture effects on corn stover in recovering xylose by DEO hydrolysis

Response surface methodology (RSM), based on a 2(2) full factorial design, evaluated the moisture effects in recovering xylose by diethyloxalate (DEO) hydrolysis. Experiments were carried out in laboratory reactors (10 mL glass ampoules) containing corn stover (0.5 g) properly ground. The ampoules were kept at 160 degrees C for 90 min.(-) Both DEO concentration and corn stover moisture content were statistically significant at 99% confidence level. The maximum xylose recovery by the response surface methodology was achieved employing both DEO concentration and corn stover moisture at near their highest levels area. We amplified this area by using an overlay plot as a graphical optimization using a response of xylose recovery more than 80%. The mathematical statistical model was validated by testing a specific condition in the satisfied overlay plot area. Experimentally, a maximum xylose recovery (81.2%) was achieved by using initial corn stover moisture of 60% and a DEO concentration of 4% w/w. The mathematical statistical model showed that xylose recovery increases during DEO corn stover acid hydrolysis as the corn stover moisture level increases. This observation could be important during the harvesting of corn before it is fully dried in the field. The corn stover moisture was an important variable to improve xylose recovery by DEO acid hydrolysis. (c) 2011 Elsevier Ltd. All rights reserved.

Performance of juveniles of Pseudoplatystoma fasciatum fed graded levels of corn gluten meal

The objective of this work was to evaluate corn gluten meal (CGM) as a substitute for fish meal in diets for striped catfish (Pseudoplatystoma fasciatum) juveniles. Eight isonitrogenous (46% crude protein) and isoenergetic (3,450 kcal kg(-1) digestible energy) diets, with increasing levels of CGM - 0, 6, 12, 18, 24, 30, 36, and 42%-, were fed to juvenile striped catfish (113.56 +/- 5.10 g) for seven weeks. Maximum values for weight gain, specific growth rate, protein efficiency ratio and feed conversion ratio, evaluated by polynomial quadratic regression, were observed with 10.4, 11.4, 15.4 and 15% of CGM inclusion, respectively. Feed intake decreased significantly from 0.8% CGM. Mesenteric fat index and body gross energy decreased linearly with increasing levels of CGM; minimum body protein contents were observed with 34.1% CGM. Yellow pigmentation of fillets significantly increased until 26.5% CGM, and decreased from this point forth. Both plasma glucose and protein concentrations decreased with increased CGM levels. The inclusion of 10-15% CGM promotes optimum of striped catfish juveniles depending on the parameter evaluated. Yellow coloration in fillets produced by CGM diets can have marketing implications.

X-Ray analysis to assess mechanical damage in sweet corn seeds

The X-ray test is a precise, fast and non-destructive method to detect mechanical damage in seeds. In the present study, the efficiency of X-ray analysis in identifying the extent of mechanical damage in sweet corn seeds and its relationship with germination and vigor was evaluated. Hybrid 'SWB 551' (sh2) seeds with round (R) and flat (F) shapes were classified as large (L), medium (M1, M2 and M3) and small (S), using sieves with round and oblong screens. After artificial exposure to different levels of damage (0, 1, 3, 5 and 7 impacts), seeds were X-rayed (15 kV, 5 min) and submitted to germination (25 °C/5 days) and cold (10 °C/7 days) tests. Digital images of normal and abnormal seedlings and ungerminated seeds from germination and cold tests were jointly analyzed with the seed X-ray images. Results showed that damage affecting the embryonic axis resulted in abnormal seedlings or dead seeds in the germination and cold tests. The X-ray analysis is efficient for identifying mechanical damage in sweet corn seeds, allowing damage severity to be associated with losses in germination and vigor.

Bromatological evaluation of eleven corn cultivars harvested at two cutting heights

The objective of this study was to evaluate the chemical composition and dry matter in vitro digestibility of stem, leaf, straw, cob and kernel fractions of eleven corn (Zea mays) cultivars, harvested at two cutting heights. The experiment was designed as randomized blocks, with three replicates, in a 2 × 11 factorial arrangement (eleven cultivars and two cutting heights). The corn cultivars evaluated were D 766, D 657, D 1000, P 3021, P 3041, C 805, C 333, AG 5011, FOR 01, CO 9621 and BR 205, harvested at a low cutting height (5 cm above ground) and a high cutting height (5 cm below the first ear insertion). Cutting height influenced the dry matter content of the stem fraction, which was lower (23.95%) in plants harvested at the low, than in plants harvested at the high cutting height (26.28%). The kernel fraction had the highest dry matter in vitro digestibility (85.13%), while cultivars did not differ between each other. Cob and straw were the fractions with the highest level of neutral detergent fiber (80.74 and 79.77%, respectively) and the lowest level of crude protein (3.84% and 3.69%, respectively). The leaf fraction had the highest crude protein content, both for plants of low and high cuttings (15.55% and 16.20%, respectively). The increase in the plant cutting height enhanced the dry matter content and dry matter in vitro digestibility of stem fraction, but did not affect the DM content of the leaf fraction.

Comparison of indigestible markers from in situ and in vivo incubation to predict apparent digestibility in hay- and corn-fed horses

Four castrated crossbred horses were used in a randomized block design to study the use of indigestible internal markers iNDF and iADF obtained in situ (from bovines) or in vivo (from equines). Treatments consisted of determining digestibility by the direct method comprising total feces collection (TC) and by the indirect method comprising internal markers iNDF and iADF obtained by in situ incubation in bovine rumen or in vivo by the mobile nylon bag (MNB) technique with horses. iNDF-IV and iADF-IV resulted in better marker recovery rate (RR) (91.50%), similar to TC. The in situ technique resulted in lower RR values for the two indigestible markers, averaging 86.50% (p < 0.05). Estimates of the nutrient coefficient of digestibility (CD) were adequately predicted by iADF-IV, for horses fed on hay exclusively, with rates 46.41, 48.16, 47.92 and 45.51% for dry matter (DM), organic matter (OM), FDN and gross energy, respectively. Results show that MNB may be used to obtain iADF in horses fed on coast-cross hay exclusively, whereas NDFi and ADFi were selected for horses fed on mixed diets to predict the coefficient of nutrient digestibility.

Practical implications of aflatoxin contamination in corn

Aflatoxin (AFL) contamination of corn is a serious economic and food security issue. Although a variety of technical solutions for reducing AFL contamination of corn have been proposed, only a few have produced satisfactory results. A successful approach is a biocontrol strategy consisting of using non-flatoxigenic strains of Aspergillus flavus to replace indigenous AFL-producing isolates. The main objective of the present thesis was to investigate the dynamic and contamination of AFL/A. flavus in corn in Northern Italy. The study also investigated the role of the key-pest of corn, the European Corn Borer (ECB), on AFL contamination and dispersal of A. flavus propagules in corn. Finally, the study evaluated the feasibility of bioplastic-based granules entrapping a non-aflatoxigenic A. flavus strain for the biocontrol of this fungus in corn. The 2-year field study demonstrated the efficacy of the bioplastic formulation to reduce AFL contamination in corn. More precisely, although AFL contamination varied among the two years, application of 15 and 30 kg ha-1 of granules reduced AFL contamination to up 60 and 85% in 2009 and 2010 respectively. Microbiological analysis showed that the relative abundance of non-aflatoxigenic soil isolates significantly increased after 1 month from granules application (mid-May) and throughout the corn-growing season. These findings were consistent with data obtained using a bioplastic-based bait specifically developed to selectively isolate Aspergilli from soil and other environmental samples. In addition, field and laboratory evaluations showed that the level of damages produced by ECB larvae were not significantly correlated to A. flavus infestation and AFL contamination. Taking together, these findings demonstrated that AFL contamination of corn in Northern Italy was variable, but above the EU limit for human consumption. First proposed in the USA, this study showed the practical possibility of this formulation to be use for reducing AFL contamination in corn in the EU.