Estados emocionais e atividade física em idosos: contribuições da literatura brasileira

This study with qualitative nature aims to analyze the impact of external factors on mood states, considering physical activity as an important factor to improve not only the physical, but also psychological factors, especially when we think of the activities performed in-group. Thus, a literature review was conducted in order to investigate in books, journals, scientific papers published in magazines, newspapers and electronic platforms the influence of exercise on emotional states of elderly people. The terms used across the curriculum contributed to the conformity of ideas on the subject. By checking some researches, it can be seen that external factors such as music, local infrastructure, professional relationship with the elderly people and other factors have been suggested as possible influencers of humor in physical activity. Knowing the preferences beyond the close contact with the elderly student, is the best way to affect possible aspects of the activity beyond just preventing circumvention of activity, avoiding sedentary lifestyle that will bring risks to the health of the elderly people

Qualidade das medidas antropométricas produzidas em unidades de atenção básica à saúde da região de Botucatu-SP, Brasil

The aim of this study was to evaluate the quality of weight measurements produced in Primary Health Care Centers in Botucatu and surroundings. 14 Health Care Centers were included, all of them located in four towns in the area of Botucatu (4,555; 5,656; 18,761 and 128,397 inhabitants). General conditions and scale calibration conditions found in those Health Care Centers were evaluated. In order to evaluate the weight accuracy obtained by the local team, 10 adult users of each Center were addressed by the rater during the service routine in order to get a new weight evaluation, immediately after the measurement made by the team. The statistic method applied for checking the weight measurement held in the Heath Care Center and the scales accuracy was the measurement error technique (MET). The results have showed that out of 19 scales, 6 of them overestimated the weight by 50 grams, 1 of them underestimated the weight by 200 grams and the others were accurate. Evaluated as a group, the result of the scale MET was 44.3g. Regarding the conformity of the measures obtained by the MET of the adults weighing in the Health Care Centers compared to the ones obtained by the researcher, the expected result was obtained in only one Center (< 100g). The results have showed data compromise, rather due to lack of health team training than due to the conditions of the equipment used for the measurement.

Isotopic analysis method (δ13C) in apple-flavoured soft drinks

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O ofuscamento da infância no brilho das telas: relações entre teoria crítica, educação e sociedade

Pós-graduação em Educação Escolar - FCLAR

On the implementation of good manufacturing practices in a small processing unity of mozzarella cheese in Brazil

This study reports the implementation of GMPs in a mozzarella cheese processing plant. The mozzarella cheese manufacturing unit is located in the Southwestern region of the state of Parana, Brazil, and processes 20,000 L of milk daily. The implementation of GMP took place with the creation of a multi-disciplinary team and it was carried out in four steps: diagnosis, report of the diagnosis and road map, corrective measures and follow-up of GMP implementation. The effectiveness of actions taken and GMP implementation was compared by the total percentages of non-conformities and conformities before and after implementation of GMR Microbiological indicators were also used to assess the implementation of GMP in the mozzarella cheese processing facility. Results showed that the average percentage of conformity after the implementation of GMP was significant increased to 66%, while before it was 32% (p < 0.05). The populations of aerobic microorganisms and total coliforms in equipment were significantly reduced (p < 0.05) after the implementation of GMP, as well as the populations of total coliforms in the hands of food handlers (p < 0.05). In conclusion, GMP implementation changed the overall organization of the cheese processing unity, as well as managers and food handlers' behavior and knowledge on the quality and safety of products manufactured. (C) 2011 Elsevier Ltd. All rights reserved.

In Vitro Analysis of Bacterial Morphology by Atomic Force Microscopy of Low Level Laser Therapy 660, 830 and 904 nm

Objective: The objective of this study was to analyze the bacterial morphology by atomic force microscopy (AFM) after the application of low-level laser therapy (LLLT) in in vitro culture of Staphylococcus aureus ATCC 29213. Background data: Infections caused by S. aureus are among the highest occurring in hospitals and can often colonize pressure ulcers. LLLT is among the methods used to accelerate the healing of ulcers. However, there is no consensus on its effect on bacteria. Materials and methods: After being cultivated and seeded, the cultures were irradiated using wavelengths of 660, 830, and 904 nm at fluences of 0, 1, 2, 3, 4, 5, and 16 J/cm(2). Viable cells of S. aureus strain were counted after 24 h incubation. To analyze the occurrence of morphological changes, the topographical measurement of bacterial cells was analyzed using the AFM. Results: The overall assessment revealed that the laser irradiation reduced the S. aureus growth using 830 and 904 nm wavelengths; the latter with the greatest inhibition of the colony-forming units (CFU/mL) (331.1 +/- 38.19 and 137.38 +/- 21.72). Specifically with 660 nm, the statistical difference occurred only at a fluence of 3 J/cm(2). Topographical analysis showed small changes in morphological conformity of the samples tested. Conclusions: LLLT reduced the growth of S. aureus with 830 and 904 nm wavelengths, particularly with 904 nm at a fluence of 3 J/cm(2), where the greatest topographical changes of the cell structure occurred.

Evaluation of the identification protocol for newborns in a private hospital

This exploratory-descriptive quantitative study aimed to evaluate the protocol for identifying newborns admitted to the Neonatal Intensive and Semi-intensive Therapy Unit of a private hospital. The case series was made up of 540 observation opportunities, selected by simple random probability sampling. The data was collected between May and August 2010 according to a form and analyzed by descriptive statistic. The protocol's general performance had a conformity index of 82.2%. There were three stages to the protocol: identification components, the identification wristbands' condition and the number of identification wristbands. The highest percentage of conformity (93%) was attributed to the second stage and the lowest (89.3%) to the third, presenting a statistically significant difference of p=0.046. In the group of 'special' neonates, 88.5% conformity was achieved. These results will make it possible to restructure the protocol for identifying newborns and to establish care and managerial goals so as to improve the quality of care and the patients' safety.

Gauging food and nutritional care quality in hospitals

Background: Food and nutritional care quality must be assessed and scored, so as to improve health institution efficacy. This study aimed to detect and compare actions related to food and nutritional care quality in public and private hospitals. Methods: Investigation of the Hospital Food and Nutrition Service (HFNS) of 37 hospitals by means of structured interviews assessing two quality control corpora, namely nutritional care quality (NCQ) and hospital food service quality (FSQ). HFNS was also evaluated with respect to human resources per hospital bed and per produced meal. Results: Comparison between public and private institutions revealed that there was a statistically significant difference between the number of hospital beds per HFNS staff member (p = 0.02) and per dietitian (p < 0.01). The mean compliance with NCQ criteria in public and private institutions was 51.8% and 41.6%, respectively. The percentage of public and private health institutions in conformity with FSQ criteria was 42.4% and 49.1%, respectively. Most of the actions comprising each corpus, NCQ and FSQ, varied considerably between the two types of institution. NCQ was positively influenced by hospital type (general) and presence of a clinical dietitian. FSQ was affected by institution size: large and medium-sized hospitals were significantly better than small ones. Conclusions: Food and nutritional care in hospital is still incipient, and actions concerning both nutritional care and food service take place on an irregular basis. It is clear that the design of food and nutritional care in hospital indicators is mandatory, and that guidelines for the development of actions as well as qualification and assessment of nutritional care are urgent.

Formazione, apprendimento e nuove prospettive e-learning. Lo sviluppo delle nuove tecnologie didattiche e la creazione di sistemi di apprendimento lungo l’intero arco della vita

The thesis of this paper is based on the assumption that the socio-economic system in which we are living is characterised by three great trends: growing attention to the promotion of human capital; extremely rapid technological progress, based above all on the information and communication technologies (ICT); the establishment of new production and organizational set-ups. These transformation processes pose a concrete challenge to the training sector, which is called to satisfy the demand for new skills that need to be developed and disseminated. Hence the growing interest that the various training sub-systems devote to the issues of lifelong learning and distance learning. In such a context, the so-called e-learning acquires a central role. The first chapter proposes a reference theoretical framework for the transformations that are shaping post-industrial society. It analyzes some key issues such as: how work is changing, the evolution of organizational set-ups and the introduction of learning organization, the advent of the knowledge society and of knowledge companies, the innovation of training processes, and the key role of ICT in the new training and learning systems. The second chapter focuses on the topic of e-learning as an effective training model in response to the need for constant learning that is emerging in the knowledge society. This chapter starts with a reflection on the importance of lifelong learning and introduces the key arguments of this thesis, i.e. distance learning (DL) and the didactic methodology called e-learning. It goes on with an analysis of the various theoretic and technical aspects of e-learning. In particular, it delves into the theme of e-learning as an integrated and constant training environment, characterized by customized programmes and collaborative learning, didactic assistance and constant monitoring of the results. Thus, all the aspects of e-learning are taken into exam: the actors and the new professionals, the virtual communities as learning subjects, the organization of contents in learning objects, the conformity to international standards, the integrated platforms and so on. The third chapter, which concludes the theoretic-interpretative part, starts with a short presentation of the state-of-the-art e-learning international market that aims to understand its peculiarities and its current trends. Finally, we focus on some important regulation aspects related to the strong impulse given by the European Commission first, and by the Italian governments secondly, to the development and diffusion of e-learning. The second part of the thesis (chapters 4, 5 and 6) focus on field research, which aims to define the Italian scenario for e-learning. In particular, we have examined some key topics such as: the challenges of training and the instruments to face such challenges; the new didactic methods and technologies for lifelong learning; the level of diffusion of e-learning in Italy; the relation between classroom training and online training; the main factors of success as well as the most critical aspects of the introduction of e-learning in the various learning environments. As far as the methodological aspects are concerned, we have favoured a qualitative and quantitative analysis. A background analysis has been done to collect the statistical data available on this topic, as well as the research previously carried out in this area. The main source of data is constituted by the results of the Observatory on e-learning of Aitech-Assinform, which covers the 2000s and four areas of implementation (firms, public administration, universities, school): the thesis has reviewed the results of the last three available surveys, offering a comparative interpretation of them. We have then carried out an in-depth empirical examination of two case studies, which have been selected by virtue of the excellence they have achieved and can therefore be considered advanced and emblematic experiences (a large firm and a Graduate School).

Sviluppo, implementazione e valutazione funzionale di un nuovo modello protesico di caviglia

Total ankle arthroplasty (TAA) is still not as satisfactory as total hip and total knee arthroplasty. For the TAA to be considered a valuable alternative to ankle arthrodesis, an effective range of ankle mobility must be recovered. The disappointing clinical results of the current generation of TAA are mostly related to poor understanding of the structures guiding ankle joint mobility. A new design (BOX Ankle) has been developed, uniquely able to restore physiologic ankle mobility and a natural relationship between the implanted components and the retained ligaments. For the first time the shapes of the tibial and talar components in the sagittal plane were designed to be compatible with the demonstrated ligament isometric rotation. This resulted in an unique motion at the replaced ankle where natural sliding as well as rolling motion occurs while at the same time full conformity is maintained between the three components throughout the flexion arc. According to prior research, the design features a spherical convex tibial component, a talar component with radius of curvature in the sagittal plane longer than that of the natural talus, and a fully conforming meniscal component. After computer-based modelling and preliminary observations in several trial implantation in specimens, 126 patients were implanted in the period July 2003 – December 2008. 75 patients with at least 6 months follow-up are here reported. Mean age was 62,6 years (range 22 – 80), mean follow-up 20,2 months. The AOFAS clinical score systems were used to assess patient outcome. Radiographs at maximal dorsiflexion and maximal plantar flexion confirmed the meniscalbearing component moves anteriorly during dorsiflexion and posteriorly during plantarflexion. Frontal and lateral radiographs in the patients, show good alignment of the components, and no signs of radiolucency or loosening. The mean AOFAS score was observed to go from 41 pre-op to 74,6 at 6 month follow-up, with further improvement at the following follow-up. These early results reveal satisfactory clinical scores, with good recovery of range of motion and reduction of pain. Radiographic assessment reveals good osteointegration. All these preliminary results confirm biomechanical studies and the validity of this novel ligamentcompatible prosthesis design. Surely it will be important to re-evaluate these patients later.

Dielektrische Relaxation und Retardation lokaler Prozesse in glasbildenden Materialien

Lokale sekundäre Prozesse in glasbildenden Materialien sind wegen ihrer Wechselwirkung mit der primären Relaxation von besonderem Interesse. Für D-Sorbitol wurde die beta-Relaxation mit drei verschiedenen dielektrischen Meßtechniken untersucht und die Ergebnisse miteinander verglichen. Im Gegensatz zu konventionellen Messungen der dielektrischen Retardation, detektiert eine echte dielektrische Relaxationsmessung den Zerfall des elektrischen Feldes unter der Bedingung einer konstanten dielektrischen Verschiebung. Eine weitere dielektrische Relaxationsmethode ist die Solvatationsdynamik. Sie detektiert die dielektrische Relaxation in der direkten Umgebung eines Farbstoffmoleküls. Die Übereinstimmung der lokal ermittelten und der makroskopisch gemittelten Ergebnisse für den Glaszustand weisen darauf hin, daß die Sekundärrelaxation in D-Sorbitol eine räumlich homogene Eigenschaft ist. Im Gegensatz zu beta-Prozessen anderer Materialien, zeigt nur der abgeschreckte Glaszustand von ortho-Terphenyl einen sekundären Prozeß. Es wurde beobachtet, daß die beta-Amplitude beim Ausheilen langsam abnimmt und im Gleichgewichtszustand der Flüssigkeit oberhalb der Glasübergangstemperatur völlig verschwindet. Viele glasbildende Materialien, wie z. B. Salol zeigen keinen dielektrischen beta-Prozeß. Im Gegensatz zu Messungen mit Standardkühlraten, zeigt eine stark abgeschreckte Salol-Probe eine symmetrische dielektrische Sekundärrelaxation. Diese neuartige Eigenschaft von Salol verschwindet irreversibel, wenn sich die Temperatur der Glasübergangstemperatur nähert.

Biomass Gasification - Process analysis and dimensioning aspects for downdraft units and gas cleaning lines

In such territories where food production is mostly scattered in several small / medium size or even domestic farms, a lot of heterogeneous residues are produced yearly, since farmers usually carry out different activities in their properties. The amount and composition of farm residues, therefore, widely change during year, according to the single production process periodically achieved. Coupling high efficiency micro-cogeneration energy units with easy handling biomass conversion equipments, suitable to treat different materials, would provide many important advantages to the farmers and to the community as well, so that the increase in feedstock flexibility of gasification units is nowadays seen as a further paramount step towards their wide spreading in rural areas and as a real necessity for their utilization at small scale. Two main research topics were thought to be of main concern at this purpose, and they were therefore discussed in this work: the investigation of fuels properties impact on gasification process development and the technical feasibility of small scale gasification units integration with cogeneration systems. According to these two main aspects, the present work was thus divided in two main parts. The first one is focused on the biomass gasification process, that was investigated in its theoretical aspects and then analytically modelled in order to simulate thermo-chemical conversion of different biomass fuels, such as wood (park waste wood and softwood), wheat straw, sewage sludge and refuse derived fuels. The main idea is to correlate the results of reactor design procedures with the physical properties of biomasses and the corresponding working conditions of gasifiers (temperature profile, above all), in order to point out the main differences which prevent the use of the same conversion unit for different materials. At this scope, a gasification kinetic free model was initially developed in Excel sheets, considering different values of air to biomass ratio and the downdraft gasification technology as particular examined application. The differences in syngas production and working conditions (process temperatures, above all) among the considered fuels were tried to be connected to some biomass properties, such elementary composition, ash and water contents. The novelty of this analytical approach was the use of kinetic constants ratio in order to determine oxygen distribution among the different oxidation reactions (regarding volatile matter only) while equilibrium of water gas shift reaction was considered in gasification zone, by which the energy and mass balances involved in the process algorithm were linked together, as well. Moreover, the main advantage of this analytical tool is the easiness by which the input data corresponding to the particular biomass materials can be inserted into the model, so that a rapid evaluation on their own thermo-chemical conversion properties is possible to be obtained, mainly based on their chemical composition A good conformity of the model results with the other literature and experimental data was detected for almost all the considered materials (except for refuse derived fuels, because of their unfitting chemical composition with the model assumptions). Successively, a dimensioning procedure for open core downdraft gasifiers was set up, by the analysis on the fundamental thermo-physical and thermo-chemical mechanisms which are supposed to regulate the main solid conversion steps involved in the gasification process. Gasification units were schematically subdivided in four reaction zones, respectively corresponding to biomass heating, solids drying, pyrolysis and char gasification processes, and the time required for the full development of each of these steps was correlated to the kinetics rates (for pyrolysis and char gasification processes only) and to the heat and mass transfer phenomena from gas to solid phase. On the basis of this analysis and according to the kinetic free model results and biomass physical properties (particles size, above all) it was achieved that for all the considered materials char gasification step is kinetically limited and therefore temperature is the main working parameter controlling this step. Solids drying is mainly regulated by heat transfer from bulk gas to the inner layers of particles and the corresponding time especially depends on particle size. Biomass heating is almost totally achieved by the radiative heat transfer from the hot walls of reactor to the bed of material. For pyrolysis, instead, working temperature, particles size and the same nature of biomass (through its own pyrolysis heat) have all comparable weights on the process development, so that the corresponding time can be differently depending on one of these factors according to the particular fuel is gasified and the particular conditions are established inside the gasifier. The same analysis also led to the estimation of reaction zone volumes for each biomass fuel, so as a comparison among the dimensions of the differently fed gasification units was finally accomplished. Each biomass material showed a different volumes distribution, so that any dimensioned gasification unit does not seem to be suitable for more than one biomass species. Nevertheless, since reactors diameters were found out quite similar for all the examined materials, it could be envisaged to design a single units for all of them by adopting the largest diameter and by combining together the maximum heights of each reaction zone, as they were calculated for the different biomasses. A total height of gasifier as around 2400mm would be obtained in this case. Besides, by arranging air injecting nozzles at different levels along the reactor, gasification zone could be properly set up according to the particular material is in turn gasified. Finally, since gasification and pyrolysis times were found to considerably change according to even short temperature variations, it could be also envisaged to regulate air feeding rate for each gasified material (which process temperatures depend on), so as the available reactor volumes would be suitable for the complete development of solid conversion in each case, without even changing fluid dynamics behaviour of the unit as well as air/biomass ratio in noticeable measure. The second part of this work dealt with the gas cleaning systems to be adopted downstream the gasifiers in order to run high efficiency CHP units (i.e. internal engines and micro-turbines). Especially in the case multi–fuel gasifiers are assumed to be used, weightier gas cleaning lines need to be envisaged in order to reach the standard gas quality degree required to fuel cogeneration units. Indeed, as the more heterogeneous feed to the gasification unit, several contaminant species can simultaneously be present in the exit gas stream and, as a consequence, suitable gas cleaning systems have to be designed. In this work, an overall study on gas cleaning lines assessment is carried out. Differently from the other research efforts carried out in the same field, the main scope is to define general arrangements for gas cleaning lines suitable to remove several contaminants from the gas stream, independently on the feedstock material and the energy plant size The gas contaminant species taken into account in this analysis were: particulate, tars, sulphur (in H2S form), alkali metals, nitrogen (in NH3 form) and acid gases (in HCl form). For each of these species, alternative cleaning devices were designed according to three different plant sizes, respectively corresponding with 8Nm3/h, 125Nm3/h and 350Nm3/h gas flows. Their performances were examined on the basis of their optimal working conditions (efficiency, temperature and pressure drops, above all) and their own consumption of energy and materials. Successively, the designed units were combined together in different overall gas cleaning line arrangements, paths, by following some technical constraints which were mainly determined from the same performance analysis on the cleaning units and from the presumable synergic effects by contaminants on the right working of some of them (filters clogging, catalysts deactivation, etc.). One of the main issues to be stated in paths design accomplishment was the tars removal from the gas stream, preventing filters plugging and/or line pipes clogging At this scope, a catalytic tars cracking unit was envisaged as the only solution to be adopted, and, therefore, a catalytic material which is able to work at relatively low temperatures was chosen. Nevertheless, a rapid drop in tars cracking efficiency was also estimated for this same material, so that an high frequency of catalysts regeneration and a consequent relevant air consumption for this operation were calculated in all of the cases. Other difficulties had to be overcome in the abatement of alkali metals, which condense at temperatures lower than tars, but they also need to be removed in the first sections of gas cleaning line in order to avoid corrosion of materials. In this case a dry scrubber technology was envisaged, by using the same fine particles filter units and by choosing for them corrosion resistant materials, like ceramic ones. Besides these two solutions which seem to be unavoidable in gas cleaning line design, high temperature gas cleaning lines were not possible to be achieved for the two larger plant sizes, as well. Indeed, as the use of temperature control devices was precluded in the adopted design procedure, ammonia partial oxidation units (as the only considered methods for the abatement of ammonia at high temperature) were not suitable for the large scale units, because of the high increase of reactors temperature by the exothermic reactions involved in the process. In spite of these limitations, yet, overall arrangements for each considered plant size were finally designed, so that the possibility to clean the gas up to the required standard degree was technically demonstrated, even in the case several contaminants are simultaneously present in the gas stream. Moreover, all the possible paths defined for the different plant sizes were compared each others on the basis of some defined operational parameters, among which total pressure drops, total energy losses, number of units and secondary materials consumption. On the basis of this analysis, dry gas cleaning methods proved preferable to the ones including water scrubber technology in al of the cases, especially because of the high water consumption provided by water scrubber units in ammonia adsorption process. This result is yet connected to the possibility to use activated carbon units for ammonia removal and Nahcolite adsorber for chloride acid. The very high efficiency of this latter material is also remarkable. Finally, as an estimation of the overall energy loss pertaining the gas cleaning process, the total enthalpy losses estimated for the three plant sizes were compared with the respective gas streams energy contents, these latter obtained on the basis of low heating value of gas only. This overall study on gas cleaning systems is thus proposed as an analytical tool by which different gas cleaning line configurations can be evaluated, according to the particular practical application they are adopted for and the size of cogeneration unit they are connected to.

Genomische Struktur und Promotorcharakterisierung des humanen ADAM10-Gens

Das ADAM10-Gen kodiert für eine membrangebundene Disintegrin-Metalloproteinase, die das Amyloidvorläuferprotein spaltet. Im Mausmodell konnte bewiesen werden, dass die Überexpression von ADAM10 die Plaquebildung vermindern und das Langzeitgedächtnis verbessert. Aus diesem Grund ist es für einen möglichen Therapieansatz für die Alzheimer’sche Erkrankung erforderlich, die Organisation des humanen ADAM10-Gens und seines Promotors aufzuklären. Beim Vergleich der genomischen Sequenzen von humanem und murinem ADAM10 zeigte sich eine hohe Übereinstimmung. Beide Gene umfassen 160 kbp und bestehen aus 16 Exons. Die ersten 500 bp stromaufwärts vom Translationsstartpunkt zwischen dem Menschen, der Maus und der Ratte sind hoch konserviert. Diese Region beinhaltet spezifische regulatorische Elemente, die die ADAM10-Transkription modulieren. In den ersten 2179 bp stromaufwärts vom humanen ADAM10-Translationsstartpunkt fanden sich einige potentiellen Transkriptionsfaktor-bindungsstellen (Brn-2, SREBP, Oct-1, Creb1/cJun, USF, Maz, MZF-1, NFkB und CDPCR3HD). Es wurde eine charakteristische GC-Box und eine CAAT-Box, aber keine TATA-Box identifiziert. Nach Klonierung dieser 2179 bp großen Region wurde eine starke Promotoraktivität, insbesondere in neuronalen Zelllinien, gefunden. Bei der Analyse von Deletionskonstrukten wurde die Region zwischen -508 und -300 als essentiell für die Transkriptionsaktivierung bestimmt. Die Promotoraktivität wird zudem streng herunterreguliert, wenn in die Region 317 bp stromaufwärts vom Startpunkt der Translation eine Punktmutation eingeführt wird. Diese per Computeranalyse als USF-Bindungsstelle deklarierte Region spielt eine zentrale Rolle bei der ADAM10-Transkription. Im EMSA wurde eine Protein-DNA-Interaktion für diese Region gezeigt. Durch transienten Transfektionen in Schneider Drosophila Insektenzellen konnte nachgewiesen werden, dass die Überexpression von Sp1 und USp3 für die ADAM10-Promotoraktivität entscheidend ist. In EMSA-Studien bestätigte sich eine Protein-DNA-Interaktion für die Region -366 bp stromaufwärts vom Translationsstartpunkt. Die Punktmutation in der CAAT-Box veränderte die die Promotoraktivität nicht. Da weiterhin für diese potentielle Bindungsstelle kein Bindungsfaktor vorausgesagt wurde, scheint die CAAT-Box keine Bedeutung bei der Promotorregulation zu spielen. Schließlich fand sich im EMSA eine Protein-DNA-Interaktion für die Bindungsstelle 203 bp stromaufwärts vom Translationsstartpunkt. Diese in Computeranalysen als RXR-Bindungsstelle identifizierte Region ist ebenfalls von Bedeutung in der Promotorregulation. Auf der Suche nach Substanzen, die die ADAM10-Promotoraktivität beeinflussen, wurde ein negativer Effekt durch die apoptoseauslösende Substanz Camptothecin und ein positiver Effekt durch die zelldifferenzierungsauslösende Substanz all-trans Retinsäure festgestellt. Mit dieser Arbeit wurde die genomische Organisation des ADAM10-Gens zusammen mit dem zugehörigen Promotor aufgeklärt und ein neuer Regulationsmechanismus für die Hochregulation der Expression der alpha-Sekretase ADAM10 gefunden. Im Weiteren sollen nun die genauen Mechanismen bei der Hochregulation der alpha-Sekretase ADAM10 durch Retinsäure untersucht und durch Mikroarray-Analysen an RNA-Proben transgener Mäuse, welche ADAM10 überexpremieren, neue therapeutische Ansätze zur Behandlung der Alzheimer´schen Erkrankung identifiziert werden.

Gesù continuatore di Giovanni. Studio storico-esegetico sulla relazione tra Gesù di Nazaret e Giovanni il Battista

L’enigma della relazione tra Gesù e Giovanni il Battista ha da sempre stimolato l’immaginazione storica degli studiosi, suscitando una varietà di ipotesi e valutazioni, spesso assai diverse. Ciò nonostante, tutti concordano su un punto: che, almeno nella sua fase maggiore in Galilea, il ministero di Gesù fosse una realtà essenzialmente autonoma, diversa, originale e irriducibile rispetto alla missione di Giovanni. In controtendenza con questa “impostazione predefinita”, il presente studio sostiene la tesi secondo cui Gesù portò avanti la sua missione come intenzionale e programmatica prosecuzione dell’opera prematuramente interrotta di Giovanni. Nella prima parte, si esamina approfonditamente quale memoria della relazione sia conservata nelle fonti più antiche, cioè Q (qui analizzata con particolare attenzione) e Marco – a cui si aggiunge Matteo, che, in ragione dello stretto legame storico-sociologico con Q, offre un esempio illuminante di rinarrazione della memoria altamente originale eppure profondamente fedele. La conclusione è che la memoria più antica della relazione Gesù-Giovanni è profondamente segnata da aspetti di accordo, conformità e allineamento. Nella seconda parte si esaminano una serie di tradizioni che attestano che Gesù era percepito pubblicamente in relazione al Battista e che egli stesso condivideva e alimentava tale percezione riallacciandosi a lui in polemica con i suoi avversari, e dipingendolo come una figura di capitale importanza nella predicazione e nell’insegnamento a seguaci e discepoli. Infine, si argomenta l’esistenza di ampie e sostanziali aree di accordo tra i due a livello di escatologia, istruzioni etiche e programma sociale, missione penitenziale verso i peccatori e attività battesimale. L’ipotesi che Gesù portasse avanti l’attività riformatrice di Giovanni, in termini di una campagna purificatoria “penitenziale-battesimale-esorcistica” in preparazione dell’avvento di Dio, consente infine di armonizzare in modo soddisfacente i due aspetti più caratteristici dell’attività di Gesù (normalmente giustapposti, quando non contrapposti): escatologia e miracoli, il Gesù profeta e il Gesù taumaturgo.

Estimation of the risks of thermal stress due to the microclimate for manual fruit and vegetable harvesters in central Italy

Agricultural workers are exposed to various risks, including chemical agents, noise, and many other factors. One of the most characteristic and least known risk factors is constituted by the microclimatic conditions in the different phases of work (in field, in greenhouse, etc). A typical condition is thermal stress due to high temperatures during harvesting operations in open fields or in greenhouses. In Italy, harvesting is carried out for many hours during the day, mainly in the summer, with temperatures often higher than 30 degrees C. According to ISO 7243, these conditions can be considered dangerous for workers' health. The aim of this study is to assess the risks of exposure to microclimatic conditions (heat) for fruit and vegetable harvesters in central Italy by applying methods established by international standards. In order to estimate the risk for workers, the air temperature, radiative temperature, and air speed were measured using instruments in conformity with ISO 7726. Thermodynamic parameters and two more subjective parameters, clothing and the metabolic heat production rate related to the worker's physical activity, were used to calculate the predicted heat strain (PHS) for the exposed workers in conformity with ISO 7933. Environmental and subjective parameters were also measured for greenhouse workers, according to ISO 7243, in order to calculate the wet-bulb globe temperature (WBGT). The results show a slight risk for workers during manual harvesting in the field. On the other hand, the data collected in the greenhouses show that the risk for workers must not be underestimated. The results of the study show that, for manual harvesting work in climates similar to central Italy, it is essential to provide plenty of drinking water and acclimatization for the workers in order to reduce health risks. Moreover, the study emphasizes that the possible health risks for greenhouse workers increase from the month of April through July.