Measurements of environmental background radiation in the surrounding area of a coal-fired power plant

Certain materials used and produced in a wide range of non-nuclear industries contain enhanced activity concentrations of natural radionuclides. In particular, electricity production from coal is one of the major sources of increased exposure to man from enhanced naturally occurring materials. Over the past decades there has been some discussion about the elevated natural background radiation in the area near coal-fired power plants due to high uranium and thorium content present in coal. This work describes the methodology developed to assess the radiological impact due to natural radiation background increasing levels, potentially originated by a coal-fired power plant’s operation. Gamma radiation measurements have been done with two different instruments: a scintillometer (SPP2 NF, Saphymo) and a gamma ray spectrometer with energy discrimination (Falcon 5000, Canberra). A total of 40 relevant sampling points were established at locations within 20 km from the power plant: 15 urban and 25 suburban measured stations. The highest values were measured at the sampling points near to the power plant and those located in the area within the 6 and 20 km from the stacks. This may be explained by the presence of a huge coal pile (1.3 million tons) located near the stacks contributing to the dispersion of unburned coal and, on the other hand, the height of the stacks (225 m) which may influence ash’s dispersion up to a distance of 20 km. In situ gamma radiation measurements with energy discrimination identified natural emitting nuclides as well as their decay products (212Pb, 214Pb, 226Ra 232Th, 228Ac, 234Th 234Pa, 235U, etc.). This work has been primarily done to in order to assess the impact of a coal-fired power plant operation on the background radiation level in the surrounding area. According to the results, an increase or at least an influence has been identified both qualitatively and quantitatively.

Assessment of heavy metals in the surroundings of coal-fired power plant

This paper aims to survey metal concentrations in soils in the vicinity of a coal-firedpower plant located in southwest of Portugal. Two annual sampling campaigns were carried out to measure a hypothetical soil contamination around the coal plant. The sampling area was divided into two subareas, both centered in the emission source, delimited by two concentric circles with radius of 6 km and 20 km. About 40 samplings points were defined in the influence area. Metals measurements were performed with a portable analytical X-ray dispersive energy fluorescence spectrometer identifying about 20 different elements in each sampling point. The most relevant elements measured included As, Cu, Fe, Hg, Pb, Ti and Zn in both sampling areas. Considering the results obtained in the first sampling campaign, arsenic is predominantly higher within the 6-20 km sampling area. The second sampling campaign showed that both sampling areas presented relatively similar metal concentrations except for Fe, Mn, Sr and Zn which concentration is higher within the 6-20 km sampling area. Also, As, Fe, Mn and Ti concentrations decreased significantly from the first to the second sampling campaign and their concentration were predominately higher in the NE-E and E-SE directions.

Particulate matter flux deposition in the vicinity of a coal-fired power plant

This paper describes the methodology adopted to assess local air quality impact in the vicinity of a coal power plant located in the south of Portugal. Two sampling areas were selected to assess the deposition flux of dust fallout and its potential spatial heterogeneity. The sampling area was divided into two subareas: the inner, with higher sampling density and urban and suburban characteristics, inside a 6-km circle centered on the stacks, and an outer subarea, mainly rural, with lower sampling density within a radius of 20 km. Particulate matter deposition was studied in the vicinity of the coal fired power plant during three seasonal sampling campaigns. For the first one, the average annual flux of dust fallout was 22.51 g/(m2 yr), ranging from 4.20 to 65.94 g/(m2 yr); for the second one was 9.47 g/(m2 yr), ranging from 0.78 to 32.72 g/(m2 yr) and for the last one was 38.42 g/(m2 yr), ranging from 1.41 to 117.48 g/(m2 yr). The fallout during the second campaign turned out to be much lower than for others. This was in part due to meteorological local patterns but mostly due to the fact that the power plant was not working at full power during the second sampling campaign.155

Modelling the Contribution of 40K, 232Th and 226Ra to Radiation Dose and Risk from Airborne Discharges of Coal-Fired Power Plants

Coal contains trace elements and naturally occurring radionuclides such as 40K, 232Th, 238U. When coal is burned, minerals, including most of the radionuclides, do not burn and concentrate in the ash several times in comparison with their content in coal. Usually, a small fraction of the fly ash produced (2-5%) is released into the atmosphere. The activities released depend on many factors (concentration in coal, ash content and inorganic matter of the coal, combustion temperature, ratio between bottom and fly ash, filtering system). Therefore, marked differences should be expected between the by-products produced and the amount of activity discharged (per unit of energy produced) from different coal-fired power plants. In fact, the effects of these releases on the environment due to ground deposition have been received some attention but the results from these studies are not unanimous and cannot be understood as a generic conclusion for all coal-fired power plants. In this study, the dispersion modelling of natural radionuclides was carried out to assess the impact of continuous atmospheric releases from a selected coal plant. The natural radioactivity of the coal and the fly ash were measured and the dispersion was modelled by a Gaussian plume estimating the activity concentration at different heights up to a distance of 20 km in several wind directions. External and internal doses (inhalation and ingestion) and the resulting risk were calculated for the population living within 20 km from the coal plant. In average, the effective dose is lower than the ICRP’s limit and the risk is lower than the U.S. EPA’s limit. Therefore, in this situation, the considered exposure does not pose any risk. However, when considering the dispersion in the prevailing wind direction, these values are significant due to an increase of 232Th and 226Ra concentrations in 75% and 44%, respectively.

Radioactivity levels of 238U and 232Th decay series and related dose rates in the surroundings of a coal power plant using high resolution g-spectrometry

Gamma radiations measurements were carried out in the vicinity of a coal-fired power plant located in the southwest coastline of Portugal. Two different gamma detectors were used to assess the environmental radiation within a circular area of 20 km centred in the coal plant: a scintillometer (SPP2 NF, Saphymo) and a high purity germanium detector (HPGe, Canberra). Fifty urban and suburban measurements locations were established within the defined area and two measurements campaigns were carried out. The results of the total gamma radiation ranged from 20.83 to 98.33 counts per second (c.p.s.) for both measurement campaigns and outdoor doses rates ranged from 77.65 to 366.51 Gy/h. Natural emitting nuclides from the U-238 and Th-232 decay series were identified as well as the natural emitting nuclide K-40. The radionuclide concentration from the uranium and thorium series determined by gamma spectrometry ranged from 0.93 to 73.68 Bq/kg, while for K-40 the concentration ranged from 84.14 to 904.38 Bq/kg. The obtained results were used primarily to define the variability in measured environmental radiation and to determine the coal plant’s influence in the measured radiation levels. The highest values were measured at two locations near the power plant and at locations between the distance of 6 and 20 km away from the stacks, mainly in the prevailing wind direction. The results showed an increase or at least an influence from the coal-fired plant operations, both qualitatively and quantitatively.

Dispersion Modelling of Natural Radionuclides 238U, 232Th and 40K Released from Coal-fired Power Plants Operations

The aim of this work was to simulate the radionuclides dispersion in the surrounding area of a coal-fired power plant, operational during the last 25 years. The dispersion of natural radionuclides (236Ra, 232Th and 40K) was simulated by a Gaussian plume dispersion model with three different stability classes estimating the radionuclides concentration at ground level. Measurements of the environmen-tal activity concentrations were carried out by γ-spectrometry and compared with results from the air dispersion and deposition model which showed that the stabil-ity class D causes the dispersion to longer distances up to 20 km from the stacks.

Fate Hazardous elements in soils surrounding a coal-fired power plant complex

Proceedings of the 13th International UFZ-Deltares Conference on Sustainable Use and Management of Soil, Sediment and Water Resources - 9–12 June 2015 • Copenhagen, Denmark

Identification of atmospheric pollutants control mechanisms during co-combustion of coal and non-toxic wastes

Doctoral dissertation for Ph.D. degree in Sustainable Chemistry

Certificate for One Share of Capital Stock in Nicola Valley Coal and Coke Company

Certificate for 1 share of capital stock in Nicola Valley Coal and Coke Company to Welland D. Woodruff, May 13, 1905.

Certificate for Twenty-One Shares of Capital Stock in Nicola Valley Coal and Coke Company

Certificate for 21 shares of capital stock in Nicola Valley Coal and Coke Company to Welland D. Woodruff, Oct. 16, 1905.

Receipt from A. Mitchell, St. Catharines for coal

Receipt from A. Mitchell, St. Catharines for coal, Aug. 24, 1887.

A comparative study of the resilience of coal logistics chains in Australia, South Africa and Canada

Au cours des dernières années l'industrie du charbon a connu un essor important. L'importance du charbon dans l'économie mondiale provient d'une demande mondiale soutenue et de niveaux de production en hausse constante. De ce fait, le nombre élevé d'importateurs et d'exportateurs est à l'origine d'un système d'échange complexe où la compétition est féroce. En effet, un nombre grandissant de pays importateurs se partagent les sources d'approvisionnement tandis qu'un nombre limité de pays exportateurs s'efforcent de répondre à la demande tout en essayant de s'accaparer le plus de parts du marché mondial. L'objectif de cette recherche s'inscrit dans ce contexte en démontrant les bénéfices associés aux chaînes logistiques résilientes pour tout acteur de l'industrie soucieux de devancer la compétition. Une analyse de la logistique de l'industrie du charbon permet entre autres de se pencher sur les questions suivantes: Comment les infrastructures influencent-elles la résilience d'une chaîne logistique? Quels risques est-ce que les catastrophes naturelles présentent pour une chaîne logistique? Comment la gouvernance influence-t-elle la résilience d'une chaîne logistique? Une chaîne logistique représente le trajet effectué par un bien ou produit au cours de son cycle de vie, du point d'origine au point de consommation. Ceci étant dit, le meilleur moyen de régler les problèmes inhérents aux chaînes logistiques est de maintenir de hauts niveaux de résilience. Cette recherche évaluera donc la résilience de chaînes logistiques du charbon des industries australienne, sud-africaine et canadienne. Pour ce faire, trois variables seront étudiées: les infrastructures, les catastrophes naturelles et la gouvernance. La comparaison des trois cas à l'étude se fera par un nombre défini d'indicateurs (12 au total) pour chacune des variables étudiées. Les résultats de cette recherche démontrent que la résilience des trois cas à l'étude se ressemble. Cependant, certaines chaînes logistiques détiennent des avantages comparatifs qui améliorent grandement leur résilience et leur compétitivité. Plusieurs sujets de recherche pourraient être utilisés pour compléter cette recherche. L'analyse comparative pourrait être appliquée à d'autres chaînes logistiques pour vérifier la viabilité des résultats. Une analyse semblable pourrait également être entreprise pour le secteur en aval de la chaîne logistique. Finalement, une méthodologie basée sur des interviews pourrait ajouter un regard différent sur les questions abordées.

How we use coal.

Para apreciar cómo se usan las riquezas naturales y como punto de partida para el aprendizaje de las propiedades y sobre cuáles son algunos de los usos del carbón. La minería del carbón, tipos de carbón: el carbón para la calefacción, carbón para la producción de energía. Humo de carbón, alquitrán de hulla, la turba. Mas combustibles de carbón. Describe la forma en que no se debe utilizar. Tiene glosario, bibliografía y direcciones de Internet.