889 resultados para Clinical Assessment Tools
Resumo:
The United Nation Intergovernmental Panel on Climate Change (IPCC) makes it clear that climate change is due to human activities and it recognises buildings as a distinct sector among the seven analysed in its 2007 Fourth Assessment Report. Global concerns have escalated regarding carbon emissions and sustainability in the built environment. The built environment is a human-made setting to accommodate human activities, including building and transport, which covers an interdisciplinary field addressing design, construction, operation and management. Specifically, Sustainable Buildings are expected to achieve high performance throughout the life-cycle of siting, design, construction, operation, maintenance and demolition, in the following areas: • energy and resource efficiency; • cost effectiveness; • minimisation of emissions that negatively impact global warming, indoor air quality and acid rain; • minimisation of waste discharges; and • maximisation of fulfilling the requirements of occupants’ health and wellbeing. Professionals in the built environment sector, for example, urban planners, architects, building scientists, engineers, facilities managers, performance assessors and policy makers, will play a significant role in delivering a sustainable built environment. Delivering a sustainable built environment needs an integrated approach and so it is essential for built environment professionals to have interdisciplinary knowledge in building design and management . Building and urban designers need to have a good understanding of the planning, design and management of the buildings in terms of low carbon and energy efficiency. There are a limited number of traditional engineers who know how to design environmental systems (services engineer) in great detail. Yet there is a very large market for technologists with multi-disciplinary skills who are able to identify the need for, envision and manage the deployment of a wide range of sustainable technologies, both passive (architectural) and active (engineering system),, and select the appropriate approach. Employers seek applicants with skills in analysis, decision-making/assessment, computer simulation and project implementation. An integrated approach is expected in practice, which encourages built environment professionals to think ‘out of the box’ and learn to analyse real problems using the most relevant approach, irrespective of discipline. The Design and Management of Sustainable Built Environment book aims to produce readers able to apply fundamental scientific research to solve real-world problems in the general area of sustainability in the built environment. The book contains twenty chapters covering climate change and sustainability, urban design and assessment (planning, travel systems, urban environment), urban management (drainage and waste), buildings (indoor environment, architectural design and renewable energy), simulation techniques (energy and airflow), management (end-user behaviour, facilities and information), assessment (materials and tools), procurement, and cases studies ( BRE Science Park). Chapters one and two present general global issues of climate change and sustainability in the built environment. Chapter one illustrates that applying the concepts of sustainability to the urban environment (buildings, infrastructure, transport) raises some key issues for tackling climate change, resource depletion and energy supply. Buildings, and the way we operate them, play a vital role in tackling global greenhouse gas emissions. Holistic thinking and an integrated approach in delivering a sustainable built environment is highlighted. Chapter two demonstrates the important role that buildings (their services and appliances) and building energy policies play in this area. Substantial investment is required to implement such policies, much of which will earn a good return. Chapters three and four discuss urban planning and transport. Chapter three stresses the importance of using modelling techniques at the early stage for strategic master-planning of a new development and a retrofit programme. A general framework for sustainable urban-scale master planning is introduced. This chapter also addressed the needs for the development of a more holistic and pragmatic view of how the built environment performs, , in order to produce tools to help design for a higher level of sustainability and, in particular, how people plan, design and use it. Chapter four discusses microcirculation, which is an emerging and challenging area which relates to changing travel behaviour in the quest for urban sustainability. The chapter outlines the main drivers for travel behaviour and choices, the workings of the transport system and its interaction with urban land use. It also covers the new approach to managing urban traffic to maximise economic, social and environmental benefits. Chapters five and six present topics related to urban microclimates including thermal and acoustic issues. Chapter five discusses urban microclimates and urban heat island, as well as the interrelationship of urban design (urban forms and textures) with energy consumption and urban thermal comfort. It introduces models that can be used to analyse microclimates for a careful and considered approach for planning sustainable cities. Chapter six discusses urban acoustics, focusing on urban noise evaluation and mitigation. Various prediction and simulation methods for sound propagation in micro-scale urban areas, as well as techniques for large scale urban noise-mapping, are presented. Chapters seven and eight discuss urban drainage and waste management. The growing demand for housing and commercial developments in the 21st century, as well as the environmental pressure caused by climate change, has increased the focus on sustainable urban drainage systems (SUDS). Chapter seven discusses the SUDS concept which is an integrated approach to surface water management. It takes into consideration quality, quantity and amenity aspects to provide a more pleasant habitat for people as well as increasing the biodiversity value of the local environment. Chapter eight discusses the main issues in urban waste management. It points out that population increases, land use pressures, technical and socio-economic influences have become inextricably interwoven and how ensuring a safe means of dealing with humanity’s waste becomes more challenging. Sustainable building design needs to consider healthy indoor environments, minimising energy for heating, cooling and lighting, and maximising the utilisation of renewable energy. Chapter nine considers how people respond to the physical environment and how that is used in the design of indoor environments. It considers environmental components such as thermal, acoustic, visual, air quality and vibration and their interaction and integration. Chapter ten introduces the concept of passive building design and its relevant strategies, including passive solar heating, shading, natural ventilation, daylighting and thermal mass, in order to minimise heating and cooling load as well as energy consumption for artificial lighting. Chapter eleven discusses the growing importance of integrating Renewable Energy Technologies (RETs) into buildings, the range of technologies currently available and what to consider during technology selection processes in order to minimise carbon emissions from burning fossil fuels. The chapter draws to a close by highlighting the issues concerning system design and the need for careful integration and management of RETs once installed; and for home owners and operators to understand the characteristics of the technology in their building. Computer simulation tools play a significant role in sustainable building design because, as the modern built environment design (building and systems) becomes more complex, it requires tools to assist in the design process. Chapter twelve gives an overview of the primary benefits and users of simulation programs, the role of simulation in the construction process and examines the validity and interpretation of simulation results. Chapter thirteen particularly focuses on the Computational Fluid Dynamics (CFD) simulation method used for optimisation and performance assessment of technologies and solutions for sustainable building design and its application through a series of cases studies. People and building performance are intimately linked. A better understanding of occupants’ interaction with the indoor environment is essential to building energy and facilities management. Chapter fourteen focuses on the issue of occupant behaviour; principally, its impact, and the influence of building performance on them. Chapter fifteen explores the discipline of facilities management and the contribution that this emerging profession makes to securing sustainable building performance. The chapter highlights a much greater diversity of opportunities in sustainable building design that extends well into the operational life. Chapter sixteen reviews the concepts of modelling information flows and the use of Building Information Modelling (BIM), describing these techniques and how these aspects of information management can help drive sustainability. An explanation is offered concerning why information management is the key to ‘life-cycle’ thinking in sustainable building and construction. Measurement of building performance and sustainability is a key issue in delivering a sustainable built environment. Chapter seventeen identifies the means by which construction materials can be evaluated with respect to their sustainability. It identifies the key issues that impact the sustainability of construction materials and the methodologies commonly used to assess them. Chapter eighteen focuses on the topics of green building assessment, green building materials, sustainable construction and operation. Commonly-used assessment tools such as BRE Environmental Assessment Method (BREEAM), Leadership in Energy and Environmental Design ( LEED) and others are introduced. Chapter nineteen discusses sustainable procurement which is one of the areas to have naturally emerged from the overall sustainable development agenda. It aims to ensure that current use of resources does not compromise the ability of future generations to meet their own needs. Chapter twenty is a best-practice exemplar - the BRE Innovation Park which features a number of demonstration buildings that have been built to the UK Government’s Code for Sustainable Homes. It showcases the very latest innovative methods of construction, and cutting edge technology for sustainable buildings. In summary, Design and Management of Sustainable Built Environment book is the result of co-operation and dedication of individual chapter authors. We hope readers benefit from gaining a broad interdisciplinary knowledge of design and management in the built environment in the context of sustainability. We believe that the knowledge and insights of our academics and professional colleagues from different institutions and disciplines illuminate a way of delivering sustainable built environment through holistic integrated design and management approaches. Last, but not least, I would like to take this opportunity to thank all the chapter authors for their contribution. I would like to thank David Lim for his assistance in the editorial work and proofreading.
Resumo:
Literature reviews suggest flavonoids, a sub-class of polyphenols, are beneficial for cognition. This is the first review examining the effect of consumption of all polyphenol groups on cognitive function. Inclusion criteria were polyphenol vs. control interventions and epidemiological studies with an objective measure of cognitive function. Participants were healthy or mildly cognitively impaired adults. Studies were excluded if clinical assessment or diagnosis of Alzheimer’s disease, dementia, or cognitive impairment was the sole measure of cognitive function, or if the polyphenol was present with potentially confounding compounds such as caffeine (e.g. tea studies) or Ginkgo Biloba. 28 studies were identified; 4 berry juice studies, 4 cocoa studies, 13 isoflavone supplement studies, 3 other supplement studies, and 4 epidemiological surveys. Overall, 16 studies reported cognitive benefits following polyphenol consumption. Evidence suggests that consuming additional polyphenols in the diet can lead to cognitive benefits, however, the observed effects were small. Declarative memory and particularly spatial memory appear most sensitive to polyphenol consumption and effects may differ depending on polyphenol source. Polyphenol berry fruit juice consumption was most beneficial for immediate verbal memory, whereas isoflavone based interventions were associated with significant improvements for delayed spatial memory and executive function. Comparison between studies was hampered by methodological inconsistencies. Hence, there was no clear evidence for an association between cognitive outcomes and polyphenol dose response, duration of intervention, or population studied. In conclusion, however, the findings do imply that polyphenol consumption has potential to benefit cognition both acutely and chronically.
Resumo:
Background: Dietary assessment methods are important tools for nutrition research. Online dietary assessment tools have the potential to become invaluable methods of assessing dietary intake because, compared with traditional methods, they have many advantages including the automatic storage of input data and the immediate generation of nutritional outputs. Objective: The aim of this study was to develop an online food frequency questionnaire (FFQ) for dietary data collection in the “Food4Me” study and to compare this with the validated European Prospective Investigation of Cancer (EPIC) Norfolk printed FFQ. Methods: The Food4Me FFQ used in this analysis was developed to consist of 157 food items. Standardized color photographs were incorporated in the development of the Food4Me FFQ to facilitate accurate quantification of the portion size of each food item. Participants were recruited in two centers (Dublin, Ireland and Reading, United Kingdom) and each received the online Food4Me FFQ and the printed EPIC-Norfolk FFQ in random order. Participants completed the Food4Me FFQ online and, for most food items, participants were requested to choose their usual serving size among seven possibilities from a range of portion size pictures. The level of agreement between the two methods was evaluated for both nutrient and food group intakes using the Bland and Altman method and classification into quartiles of daily intake. Correlations were calculated for nutrient and food group intakes. Results: A total of 113 participants were recruited with a mean age of 30 (SD 10) years (40.7% male, 46/113; 59.3%, 67/113 female). Cross-classification into exact plus adjacent quartiles ranged from 77% to 97% at the nutrient level and 77% to 99% at the food group level. Agreement at the nutrient level was highest for alcohol (97%) and lowest for percent energy from polyunsaturated fatty acids (77%). Crude unadjusted correlations for nutrients ranged between .43 and .86. Agreement at the food group level was highest for “other fruits” (eg, apples, pears, oranges) and lowest for “cakes, pastries, and buns”. For food groups, correlations ranged between .41 and .90. Conclusions: The results demonstrate that the online Food4Me FFQ has good agreement with the validated printed EPIC-Norfolk FFQ for assessing both nutrient and food group intakes, rendering it a useful tool for ranking individuals based on nutrient and food group intakes.
Resumo:
Backgound and aims: The main purpose of the PEDAL study is to identify and estimate sample individual pharmacokinetic- pharmacodynamic (PK/PD) models for duodenal infusion of levodopa/carbidopa (Duodopa®) that can be used for in numero simulation of treatment strategies. Other objectives are to study the absorption of Duodopa® and to form a basis for power calculation for a future larger study. PK/PD based on oral levodopa is problematic because of irregular gastric emptying. Preliminary work with data from [Gundert-Remy U et al. Eur J Clin Pharmacol 1983;25:69-72] suggested that levodopa infusion pharmacokinetics can be described by a two-compartment model. Background research led to a hypothesis for an effect model incorporating concentration-unrelated fluctuations, more complex than standard E-max models. Methods: PEDAL involved a few patients already on Duodopa®. A bolus dose (normal morning dose plus 50%) was given after a washout during night. Data collection continued until the clinical effect was back at baseline. The procedure was repeated on two non-consecutive days per patient. The following data were collected in 5 to 15 minutes intervals: i) Accelerometer data. ii) Three e-diary questions about ability to walk, feelings of “off” and “dyskinesia”. iii) Clinical assessment of motor function by a physician. iv) Plasma concentrations of levodopa, carbidopa and the metabolite 3-O-methyldopa. The main effect variable will be the clinical assessment. Results: At date of abstract submission, lab analyses were currently being performed. Modelling results, simulation experiments and conclusions will be presented in our poster.
Resumo:
Objective Levodopa in presence of decarboxylase inhibitors is following two-compartment kinetics and its effect is typically modelled using sigmoid Emax models. Pharmacokinetic modelling of the absorption phase of oral distributions is problematic because of irregular gastric emptying. The purpose of this work was to identify and estimate a population pharmacokinetic- pharmacodynamic model for duodenal infusion of levodopa/carbidopa (Duodopa®) that can be used for in numero simulation of treatment strategies. Methods The modelling involved pooling data from two studies and fixing some parameters to values found in literature (Chan et al. J Pharmacokinet Pharmacodyn. 2005 Aug;32(3-4):307-31). The first study involved 12 patients on 3 occasions and is described in Nyholm et al. Clinical Neuropharmacology 2003:26:156-63. The second study, PEDAL, involved 3 patients on 2 occasions. A bolus dose (normal morning dose plus 50%) was given after a washout during night. Plasma samples and motor ratings (clinical assessment of motor function from video recordings on a treatment response scale between -3 and 3, where -3 represents severe parkinsonism and 3 represents severe dyskinesia.) were repeatedly collected until the clinical effect was back at baseline. At this point, the usual infusion rate was started and sampling continued for another two hours. Different structural absorption models and effect models were evaluated using the value of the objective function in the NONMEM package. Population mean parameter values, standard error of estimates (SE) and if possible, interindividual/interoccasion variability (IIV/IOV) were estimated. Results Our results indicate that Duodopa absorption can be modelled with an absorption compartment with an added bioavailability fraction and a lag time. The most successful effect model was of sigmoid Emax type with a steep Hill coefficient and an effect compartment delay. Estimated parameter values are presented in the table. Conclusions The absorption and effect models were reasonably successful in fitting observed data and can be used in simulation experiments.
Resumo:
BACKGROUND: Misoprostol is established for the treatment of incomplete abortion but has not been systematically assessed when provided by midwives at district level in a low-resource setting. We investigated the effectiveness and safety of midwives diagnosing and treating incomplete abortion with misoprostol, compared with physicians. METHODS: We did a multicentre randomised controlled equivalence trial at district level at six facilities in Uganda. Eligibility criteria were women with signs of incomplete abortion. We randomly allocated women with first-trimester incomplete abortion to clinical assessment and treatment with misoprostol either by a physician or a midwife. The randomisation (1:1) was done in blocks of 12 and was stratified for study site. Primary outcome was complete abortion not needing surgical intervention within 14-28 days after initial treatment. The study was not masked. Analysis of the primary outcome was done on the per-protocol population with a generalised linear-mixed effects model. The predefined equivalence range was -4% to 4%. The trial was registered at ClinicalTrials.gov, number NCT01844024. FINDINGS: From April 30, 2013, to July 21, 2014, 1108 women were assessed for eligibility. 1010 women were randomly assigned to each group (506 to midwife group and 504 to physician group). 955 women (472 in the midwife group and 483 in the physician group) were included in the per-protocol analysis. 452 (95·8%) of women in the midwife group had complete abortion and 467 (96·7%) in the physician group. The model-based risk difference for midwife versus physician group was -0·8% (95% CI -2·9 to 1·4), falling within the predefined equivalence range (-4% to 4%). The overall proportion of women with incomplete abortion was 3·8% (36/955), similarly distributed between the two groups (4·2% [20/472] in the midwife group, 3·3% [16/483] in the physician group). No serious adverse events were recorded. INTERPRETATION: Diagnosis and treatment of incomplete abortion with misoprostol by midwives is equally safe and effective as when provided by physicians, in a low-resource setting. Scaling up midwives' involvement in treatment of incomplete abortion with misoprostol at district level would increase access to safe post-abortion care. FUNDING: The Swedish Research Council, Karolinska Institutet, and Dalarna University.
Resumo:
OBJECTIVE: This study aimed to assess women´s acceptability of diagnosis and treatment of incomplete abortion with misoprostol by midwives, compared with physicians. METHODS: This was an analysis of secondary outcomes from a multi-centre randomized controlled equivalence trial at district level in Uganda. Women with first trimester incomplete abortion were randomly allocated to clinical assessment and treatment with misoprostol by a physician or a midwife. The randomisation (1:1) was done in blocks of 12 and stratified for health care facility. Acceptability was measured in expectations and satisfaction at a follow up visit 14-28 days following treatment. Analysis of women's overall acceptability was done using a generalized linear mixed-effects model with an equivalence range of -4% to 4%. The study was not masked. The trial is registered at ClinicalTrials.org, NCT 01844024. RESULTS: From April 2013 to June 2014, 1108 women were assessed for eligibility of which 1010 were randomized (506 to midwife and 504 to physician). 953 women were successfully followed up and included in the acceptability analysis. 95% (904) of the participants found the treatment satisfactory and overall acceptability was found to be equivalent between the two study groups. Treatment failure, not feeling calm and safe following treatment, experiencing severe abdominal pain or heavy bleeding following treatment, were significantly associated with non-satisfaction. No serious adverse events were recorded. CONCLUSIONS: Treatment of incomplete abortion with misoprostol by midwives and physician was highly, and equally, acceptable to women. TRIAL REGISTRATION: ClinicalTrials.gov NCT01844024.
Resumo:
The term “social entrepreneurship” has been attracting growing interest from different sectors in the past years, driven by the possibility of employing business techniques to tackle recurrent social and environmental issues. At the forefront of this global phenomenon is microcredit, seen by many as an effective anti-poverty tool and having the Grameen Bank as its flagship program. While the prospects of social entrepreneurship seem promising, the newness of the concept and its somewhat confusing definition make conditions difficult to analyze this contemporary phenomenon. Therefore, the objective of this study was to discuss the challenges faced by social entrepreneurs and alternatives of development for social businesses through a case study on a Brazilian microcredit institution and inclusive business, Banco Pérola. The case addresses a growing need for case studies designed for teaching in the field of social entrepreneurship. It was focused mainly on understanding the development challenges within Banco Pérola, and built based on interviews carried out with top management, credit officer and clients of the institution, as well as on secondary data collected. An analysis of the case study was performed under a Teaching Notes. As illustrated by the Banco Pérola case, the main difficulties encountered by social entrepreneurs relate to the systematization of processes and creation of operational routines, including for performance evaluation (impact assessment tools); to the capture and management of both financial and human capital; to scaling up the business model and to the need of forging closer and more personal relationships with customers as against in traditional banking practices. In spite of certain limitations, such as the fact that the case might soon become outdated due to the fast-changing environment surrounding Banco Pérola, or the fact that not all relevant stakeholders (e.g. partners) were selected for interviews, the research objective has been achieved and the study can be seen as a contribution to spreading the concept of social entrepreneurship.
Resumo:
Fundamento: A obesidade abdominal apresenta elevada prevalência em mulheres com síndrome dos ovários policísticos (SOP) e está associada a um aumento do risco cardiovascular. Objetivo: Verificar a acurácia da circunferência da cintura (CC), da relação cintura-quadril (RCQ), da relação cinturaestatura (RCEST) e do índice de conicidade (índice C), no que se refere à detecção de fatores de risco cardiovascular (FRCV) em mulheres com SOP. Métodos: Por meio de estudo transversal, foram alocadas 102 mulheres (26,5 ± 5 anos) com diagnóstico de SOP, de acordo com o consenso de Rotterdam. O colesterol total (CT), os triglicerídeos (TG), o LDL-colesterol (LDL-C), o HDLcolesterol (HDL-C), a glicemia de jejum, a glicemia após teste oral de tolerância à glicose (TOTG) e a pressão arterial (PA) foram avaliados em todas as pacientes, além das variáveis antropométricas. Resultados: A relação cintura-estatura foi o marcador que apresentou correlações positivas significativas com o maior número de FRCV (PA, TG e glicemia após TOTG), destacando-se ainda a correlação negativa com HDL-C. Todos os marcadores antropométricos avaliados se correlacionaram positivamente com PA, enquanto CC e RCQ apresentaram correlação positiva também com TG. No tocante à acurácia para detecção de FRCV, os indicadores antropométricos considerados apresentaram taxas de sensibilidade superiores a 60%, com destaque para a RCEST, que apresentou sensibilidade superior a 70%. Conclusão: A RCEST demonstrou ser o indicador antropométrico com a melhor acurácia para a predição de FRCV. Nesse sentido, propõe-se a inclusão desse parâmetro de fácil mensuração na avaliação clínica para o rastreamento de mulheres com SOP e FRCV----------------------ABSTRACT Background: Women with polycystic ovary syndrome (PCOS) present a high prevalence of abdominal obesity, which is associated with an increased cardiovascular risk. Objective: To verify the accuracy of the waist circumference (WC), waist-to-hip ratio (WHR), waist-to-height ratio (WHtR) and the conicity index (CI) in the detection of cardiovascular risk factors (CVRF) in women with PCOS. Methods: The present transversal study allocated 102 women (26.5 ± 5 years) with a diagnosis of PCOS, according to the Rotterdam criteria. Total cholesterol (TC), triglycerides (TG), LDL-cholesterol (LDL-C), HDL-cholesterol (HDL-C), fasting glucose, glucose after the oral glucose tolerance test (OGTT) and blood pressure (BP) were evaluated in all patients, in addition to the anthropometric variables. Results: The WHtR was the marker that presented significant positive correlations with the highest number of CVRF (BP, TG and post-OGTT glucose), whereas there was a negative correlation with HDL-C. All the evaluated anthropometric markers were positively correlated with BP, whereas WC and WHR also presented a positive correlation with TG. Regarding the accuracy for the detection of CVRF, the anthropometric markers presented a sensibility > 60%, especially the WHtR, which had a sensibility > 70%. Conclusion: The WHtR showed to be the most accurate anthropometric indicator for the prediction of CVRF. In this sense, we propose the inclusion of this easily-measured parameter in the clinical assessment for the screening of women with PCOS and CVRF
Resumo:
Alterations in the neuropsychomotor development of children are not rare and can manifest themselves with varying intensity at different stages of their development. In this context, maternal risk factors may contribute to the appearance of these alterations. A number of studies have reported that neuropsychomotor development diagnosis is not an easy task, especially in the basic public health network. Diagnosis requires effective, low-cost, and easy - to-apply procedures. The Denver Developmental Screening Test, first published in 1967, is currently used in several countries. It has been revised and renamed as the Denver II Test and meets the aforementioned criteria. Accordingly, the aim of this study was to apply the Denver II Test in order to verify the prevalence of suspected neuropsychomotor development delay in children between the ages of 0 and 12 months and correlate it with the following maternal risk factors: family income, schooling, age at pregnancy, drug use during pregnancy, gestational age, gestational problems, type of delivery and the desire to have children. For data collection, performed during the first 6 months of 2004, a clinical assessment was made of 398 children selected by pediatricians and the nursing team of each public health unit. Later, the parents or guardians were asked to complete a structured questionnaire to determine possible risk indicators of neuropsychomotor development delay. Finally the Denver II Developmental Screening Test (DDST) was applied. The data were analyzed together, using Statistical Package for Social Science (SPSS) software, version 6.1. The confidence interval was set at 95%. The Denver II Test yielded normal and questionable results. This suggests compromised neuropsychomotor development in the children examined and deserves further investigation. The correlation of the results with preestablished maternal risk variables (family income, mother s schooling, age at pregnancy, drug use during the pregnancy and gestational age) was strongly significant. The other maternal risk variables (gestational problems, type of delivery and desire to have children) were not significant. Using an adjusted logistic regression model, we obtained the estimate of the greater likelihood of a child having suspected neuropsychomotor development delay: a mother with _75 4 years of schooling, chronological age less than 20 years and a drug user during pregnancy. This study produced two manuscripts, one published in Acta Cirúrgica Brasileira , in which an analysis was performed of children with suspected neuropsychomotor development delay in the city of Natal, Brazil. The other paper (to be published) analyzed the magnitude of the independent variable maternal schooling associated to neuropsychomotor development delay, every 3 months during the first twelve months of life of the children selected.. The results of the present study reinforce the multifactorial characteristic of development and the cumulative effect of maternal risk factors, and show the need for a regional policy that promotes low-cost programs for the community, involving children at risk of neuropsychomotor development delay. Moreover, they suggest the need for better qualified health professionals in terms of monitoring child development. This was an inter- and multidisciplinary study with the integrated participation of doctors, nurses, nursing assistants and professionals from other areas, such as statisticians and information technology professionals, who met all the requirements of the Postgraduate Program in Health Sciences of the Federal University of Rio Grande do Norte
Resumo:
This thesis entitled SINAES: the different faces of the evaluation at UFRN, aims to analyze the configuration that the national policy for assessment in higher education has taken on UFRN. We assume that in recent years there are an oscillation between the concepts of evaluation, according with the logic of public administration it has preferred an approach that presents itself as a promoter of quality, sometimes with regulatory aspects, sometimes with educational ones. The text discusses the use of the new assessment tools for higher education placing them under the new demands on state reform context in which this is to promote and measure quality based on the values of excellence and competitiveness. This movement arises from the redefinition of the role of the State that has been taking features of Evaluator State. From a historical review of government initiatives in the field of evaluation, we analyze the characteristics of assessment policies outlined over the past decades. We are based on the theoretical method that aims to examine the multiple determinants that shape a particular reality from the larger movement of totality. To identify, in this case, connections and ruptures that have emerged over the history of assessment policies aimed at higher education by checking their determinants in order to better explain the reality. To investigate the object of this study we used as instruments: the research literature and research documents, the semi-structured interviews and non-participant observation. The study revealed that there are different practices of evaluation and that before to establishment the SINAES program, the UFRN already had a culture of an institutional assessment, more participatory and democratic, opposing to the rigidity of the self-assessment in SINAES program that it was instituted by the Commission for assessment (CPA). We also noticed that the implementation of the SINAES at URFN has been performed very slowly and the breadth and complexity of the evaluation process has contributed to hinder its implementation in all dimensions provided by MEC. Although it was observed that in its operationalization the SINAES has assumed a more normative assessment and directed to establish rankings between courses and higher education schools than to establish a more qualitative assessment in this system. As regards the evaluation of the undergraduate course studied on this research and subjected to the three dimensions of evaluation proposed by SINAES (self-assessment, Evaluation of Courses and ENADE) it was not possible to verify an effective integration between the methods of assessing conducted. The results are considered separately, in only a partial view of the course evaluated the proposal what pits the SINAES as a system that involves the totality
Resumo:
Diabetes Mellitus (DM) affected approximately 171 million people in the world in the year 2000 as described by the World Health Organization (WHO). Because DM is a multisystem disease it can cause several complications especially those related to the cardiovascular system. The Peripheral Arterial Disease (PAD) of the lower limbs and the Diabetic Distal Symmetric Polyneuropathy (DDSP) can affect the DM patient causing consequences as the diabetic foot and eventually amputations. The main objective of this study was to determine the prevalence of PAD and sensorial impairment in 73 type 2 DM (DM2) patients and also assess the impact of PAD on quality of life, level of physical activity and body composition. For clinical assessment it was used: the ankle-brachial index (ABI); quantitative sensorial test for tactile sensibility (ST), pain (SD), vibration (SV); Achilles tendon reflex (RA); quality of life questionnaire (SF-36); modified Baecke physical activity questionnaire and bioelectric impedance. Prevalence of PAD in the studied population was 13.7%. ABI was inversely correlated to age (p=0,03; rhô= -0,26), diabetes duration (p=0,02; rhô= -0,28) and blood pressure (p= 0,0007; rhô= -0,33). There were lower scores for physical health summary on the SF-36 in DM2 patients; however, the presence of PAD predominantly mild did not significantly impact quality of life, body composition or physical activity level assessed by questionnaire. Fourteen patients (19.2%) present bilateral and symmetrical alterations in two or more sensorial tests compatible to DPN diagnosis. Abnormalities in ST, SD and SV were present in 27.3%, 24.6% and 8.2%; respectively. There was association of results from ST abnormalities with RA and mainly with SD, suggesting the importance of 10g monofilament use in DM2 routine assessment. In conclusion, the prevalence of PAD in subclinical DM2 was slightly higher compared to the general population and in agreement to previously published data in DM patients. The PAD severity was predominantly mild and still without repercussion on quality of life and body composition. Our study demonstrated a significant prevalence of both PAD and DPN in DM2 without previous diagnosis of these complications and indicates the necessity of early preventive and therapeutic interventions for this population
Resumo:
Many studies have been made to understand the process of tissular cicatrization, as well as the possible effects of laser therapy in the wound healing. However, the influence of low frequency laser irradiation in the repairing process is not completely understood. Our study has the purpose to assess clinically the effect of postoperative irradiation of the low frequency laser in humans, and the gingival repairing process postgingivoplasty performed with the extern bevel technique. Twenty-four patients with inflammatory gingival hyperplasia were enrolled in this study, which did not reduce with basic periodontal procedures, and patients with melanin pigmentation, with esthetic indications. After surgery the test group, randomly selected by a drawing, received laser application with energy density of 4 J/cm2, immediately after surgery and each 48 hours, during a week, with a total of 4 sections. The control group did not receive irradiation. The visual clinical analyses were performed by a single blind examiner, in the 2nd, 4th, 6th, 8th, 15th and 21st days post surgery. For statistic analyses of the data was used a Q-square test. Concerning the color, the results showed a better wound healing during days 6 to 8. when assessed the degree of progress of surgical wound, the results showed that the test group had a better cicatrization compared with the control group in the 2nd, 6th, 8th and 15th days post surgery, and at the 21st day both groups had the same results. Our results confirm that the laser had clinical influence in the repairing process after gingivoplasty surgery during days 2 to 15 post surgery
Correlação entre a qualidade de vida, classe funcional e idade em portadores de marca-passo cardíaco
Resumo:
OBJETIVO: Avaliar se existe correlação entre qualidade de vida e classe funcional em pacientes no pós-implante de marca-passo cardíaco, e sua relação com idade. MÉTODOS: Investigados 107 pacientes de ambos os sexos (49,5% do sexo feminino e 50,5% do sexo masculino), tempo médio de implante 6,36º ±2,99 meses e média de idade 69,3º ±12,6 anos. Para avaliação da classe funcional, foi utilizada escala proposta por Goldman e para qualidade de vida, questionário AQUAREL associado ao SF-36. Realizada análise estatística pela correlação de Spearman, com significância de 5%. RESULTADOS: Foram observadas correlações negativas entre qualidade de vida e classe funcional: AQUAREL nos três domínios, desconforto no peito (r=-0,197, P=0,042), dispneia (r=-0,508, P =0,000), arritmia (r=-0,271, P=0,005) e, no SF-36 nos oito domínios. em relação à idade, correlação negativa com Capacidade Funcional do SF-36 (r=-0,338, P=0,000) e não se observou correlação com AQUAREL. Entre idade e classe funcional observou-se correlação positiva (r=0,237, P=0,014). CONCLUSÃO: Neste estudo, encontrou-se correlação negativa entre qualidade de vida e classe funcional, evidenciando nesta amostra que os pacientes pertencentes a melhor classe funcional apresentaram melhor qualidade de vida. Conforme maior idade, pior a qualidade de vida em Capacidade Funcional e em classe funcional. Sugere-se, que idade e classe funcional influenciam qualidade de vida e as escalas de classificação funcional podem constituir um dos instrumentos que integram a avaliação e refletem a qualidade de vida em portadores de marca-passo.
