Neopaleozoic striated surfaces in the granitic basement and clast pavement remains of Salto, SP

Near Guarau Ceramic, localized southwest of Salto city in the State of Sao Paulo, two granite outcrops, distant some tens of meters from each other, display Neopaleozoic striated surfaces. These surfaces are in contact with diamictites from the Itarare Subgroup. The striae correspond to sub parallel grooves with millimetric spacing and depth, oriented about N48E and dipping 12 degrees to 42 degrees towards SE. Observed features and association with diamictites indicate an origin by glacial abrasion due to ice movement from southeast towards northwest. About 1.8 km east of Salto, unconsolidated material containing flat-iron-shaped and striated clasts was found on top of granite outcrops, interpreted as clasts pavement remains.

Litoestratigrafia e deformação cenzóica na região de Icapuí, Ceará, e implicações para a estruturação de campos de petróleo na borda ocidental da bacia Potiguar(NE do Brasil)

This thesis deals with the sedimentological/stratigraphic and structural evolution of the sedimentary rocks that occur in the NW continental border of the Potiguar Basin. These rocks are well exposed along coastal cliffs between the localities of Lagoa do Mato and Icapuí, Ceará State (NE Brazil). The sedimentological/stratigraphic study involved, at the outcrop scale, detailed facies descriptions, profile mapping of the vertical succession of different beds, and columnar sections displaying inferred lateral relationships. The approach was complemented by granulometric and petrographic analyses, including the characterization of heavy mineral assemblages. The data set allowed to recognize two kinds of lithological units, a carbonate one of very restricted occurrence at the base of the cliffs, and three younger, distinct siliciclastic units, that predominate along the cliffs, in vertical and lateral extent. The carbonate rocks were correlated to the late Cretaceous Jandaíra Formation, which is covered by the siliciclastic Barreiras Formation. The Barreiras Formation occurs in two distinct structural settings, the usual one with nondeformed, subhorizontal strata, or as tilted beds, affected by strong deformation. Two lithofacies were recognized, vertically arranged or in fault contacts. The lower facies is characterized by silty-argillaceous sandstones with low-angle cross bedding; the upper facies comprises medium to coarse grained sandstones, with conglomeratic layers. The Tibau Formation (medium to coarse-grained sandstones with argillite intercalations) occurs at the NW side of the studied area, laterally interlayered with the Barreiras Formation. Eolic sediments correlated to the Potengi Formation overly the former units, either displaying an angular unconformity, or simply an erosional contact (stratigraphic unconformity). Outstanding structural features, identified in the Barreiras Formation, led to characterize a neocenozoic stress field, which generated faults and folds and/or reactivated older structures in the subjacent late cretaceous (to paleogene, in the offshore basin) section. The structures recognized in the Barreiras Formation comprise two distinct assemblages, namely a main extensional deformation between the localities of Ponta Grossa and Redonda, and a contractional style (succeeded by oblique extensional structures) at Vila Nova. In the first case, the structural assemblage is dominated by N-S (N±20°Az) steep to gently-dipping extensional faults, displaying a domino-style or listric geometry with associated roll-over structures. This deformation pattern is explained by an E-W/WNW extension, contemporaneous with deposition of the upper facies of the Barreiras Formation, during the time interval Miocene to Pleistocene. Strong rotation of blocks and faults generated low-angle distensional faults and, locally, subvertical bedding, allowing to estimate very high strain states, with extension estimates varying between 40% up to 200%. Numerous detachment zones, parallel to bedding, help to acommodate this intense deformation. The detachment surfaces and a large number of faults display mesoscopic features analoguous to the ones of ductile shear zones, with development of S-C fabrics, shear bands, sigmoidal clasts and others, pointing to a hydroplastic deformation regime in these cases. Local occurrences of the Jandaíra limestone are controled by extensional faults that exhume the pre-Barreiras section, including an earlier event with N-S extension. Finally, WNWtrending extensional shear zones and faults are compatible with the Holocene stress field along the present continental margin. In the Vila Nova region, close to Icapuí, gentle normal folds with fold hinges shallowly pluging to SSW affect the lower facies of the Barreiras Formation, displaying an incipient dissolution cleavage associated with an extension lineation at high rake (a S>L fabric). Deposition of the upper facies siliciclastics is controlled by pull-apart graben structures, bordered by N-NE-trending sinistral-normal shear zones and faults, characterizing an structural inversion. Microstructures are compatible with tectonic deformation of the sedimentary pile, burried at shallow depths. The observed features point to high pore fluid pressures during deformation of the sediments, producing hydroplastic structures through mechanisms of granular flow. Such structures are overprinted by microfractures and microfaults (an essentially brittle regime), tracking the change to microfracturing and frictional shear mechanisms accompanying progressive dewatering and sediment lithification. Correlation of the structures observed at the surface with those present at depth was tested through geophysical data (Ground Penetrating Radar, seismics and a magnetic map). EW and NE-trending lineaments are observed in the magnetic map. The seismic sections display several examples of positive flower structures which affect the base of the cretaceous sediments; at higher stratigraphic levels, normal components/slips are compatible with the negative structural inversion characterized at the surface. Such correlations assisted in proposing a structural model compatible with the regional tectonic framework. The strong neogenepleistocene deformation is necessarily propagated in the subsurface, affecting the late cretaceous section (Açu and Jandaíra formations), wich host the hydrocarbon reservoirs in this portion of the Potiguar Basin. The proposed structural model is related to the dextral transcurrent/transform deformation along the Equatorial Margin, associated with transpressive terminations of E-W fault zones, or at their intersections with NE-trending lineaments, such as the Ponta Grossa-Fazenda Belém one (the LPGFB, itself controlled by a Brasiliano-age strike-slip shear zone). In a first step (and possibly during the late Cretaceous to Paleogene), this lineament was activated under a sinistral transpressional regime (antithetic to the main dextral deformation in the E-W zones), giving way to the folds in the lower facies of the Barreiras Formation, as well as the positive flower structures mapped through the seismic sections, at depth. This stage was succeeded (or was penecontemporaneous) by the extensional structures related to a (also sinistral) transtensional movement stage, associated to volcanism (Macau, Messejana) and thermal doming processes during the Neogene-Pleistocene time interval. This structural model has direct implications to hydrocarbon exploration and exploitation activities at this sector of the Potiguar Basin and its offshore continuation. The structure of the reservoirs at depth (Açu Formation sandstones of the post-rift section) may be controlled (or at least, strongly influenced) by the deformation geometry and kinematics characterized at the surface. In addition, the deformation event recognized in the Barreiras Formation has an age close to the one postulated for the oil maturation and migration in the basin, between the Oligocene to the Miocene. In this way, the described structural cenario represents a valid model to understand the conditions of hydrocarbon transport and acummulation through space openings, trap formation and destruction. This model is potentially applicable to the NW region of the Potiguar Basin and other sectors with a similar structural setting, along the brazilian Equatorial Atlantic Margin

Pirometamorfismo nos arenitos da Formação Açu, Bacia Potiguar, NE do Brasil

Pyrometamorphism results from conditions of high temperatures and very low pressures provoked by the intrusion of hypabyssal basic bodies into sedimentary or metassedimentary hosting rocks. The onshore portion of the Potiguar Basin in NE Brazil offers examples of this type of metamorphism nearby the contacts of Paleogene to Neogene plugs, sills and dikes of diabases and basalts crosscutting sandstones, siltstones and shales of the Açu Formation (Albian-Cenomanian). The thermal effects over these rocks are reflected on textures and minerals assemblages that characterize the sanidinite facies of metamorphism, often with partial melting of the feldspathic and mica-rich matrix. The liquid formed is potassic and peraluminous, with variably colored rhyolitic glass (colorless, yellow, brown) comprising microcrystals of tridymite, sanidine and clinoenstatite, besides residual detrital clasts of quartz and rarely zircon, staurolite and garnet. Lenses of shale intercalated within the sandstones display crystallites of Fe-cordierite (sekaninaite), mullite, sanidine, armalcolite (Fe-Ti oxide) and brown spinel. The rocks formed due to the thermal effect of the intrusions are called buchites for which two types are herein described: a light one derived from feldspathic sandstone and siltstone protoliths; and a dark one derived from black shale protoliths. Textures indicating partial melting and minerals such as sanidine, mullite, tridymite and armalcolite strongly demonstrate that during the intrusion of the basic bodies the temperature reached 1,000-1,150°C, and was followed by quenching. Cooling of the interstitial melts has as consequences the closure of pores and decrease of the permeability of the protolith, which varies from about 17-11% in the unaffected rocks to zero in the thermally modified types. Although observed only at contacts and over small distances, the number of basic intrusions hosted within the Potiguar Basin in both onshore and offshore portions leaves opened the possibility of important implications of the thermal effects over the hydrocarbon exploration in this area as well in other Cretaceous and Paleozoic basins in Brazil

Glacially striated, soft sediment surfaces on late Paleozoic tillite at São Luiz do Purunã, PR

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

AMS and grain shape fabric of the Late Palaeozoic diamictites of the Southeastern Paran Basin, Brazil

Diamictites interbedded with marine shales and turbidites onlap the eastern border of the Parana Basin (Southern Brazil). These poorly sorted sediments were deposited during the Permo-Carboniferous glaciation, and their matrix-supported clasts show no preferred orientation. These massive rocks have been studied using anisotropy of magnetic susceptibility (AMS) and grain shape fabric. Hysteresis loops and thermomagnetic measurements show that AMS depends mostly on the paramagnetic clays, but fine ferromagnetic particles also contribute to the anisotropy. The coarse silt to sand grain preferred orientation study supports the use of AMS in describing the diamictite fabric, at least regarding the orientation of the foliation. AMS and grain shape data reveal subhorizontal to weakly inclined magnetic and grain shape foliation parallel to the regional bedding. The magnetic lineations are normally scattered within the foliation plane in agreement with the oblate AMS ellipsoids found in these rocks. Both fabric patterns are consistent with deposition by subaqueous mudflows that were resedimented downslope, with elastic supply from continental sources. The off-vertical grain shape foliation poles suggest that the deposition of diamictites was controlled by the depocentre topography of the Rio do Sul sub-basin.

First record of petrified Permian pecopterids from the Parana Basin, Brazil (Corumbatai Formation, Passa Dois Group, northeastern State of São Paulo): Morphology, anatomy and paleoecological implications

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nova contribuiçao ao conhecimento da formação Rio Claro (T) na Folha Rio Claro (SP)

The Rio Claro Formation mainly occurs in the county of Rio Claro (SP) lying unconformably on Paleozoic and Mesozoic rocks. Its thickness is 30-40 m. It shows fine to coarse, regular to poor sorted, Triable sandstones and conglomerates with quartzite and quartz clasts in the base. Thin layers of mudstone occur interbeded. Stratigraphic maps had been elaborated in recent analyses allowing to improve the knowledge about the formation. The biggest thicknesses occur on the east part of the studied area. The coarse/fine clastic ratio map demonstrates that fine sediments are concentrated in the east side, and suggests the existence of barriers which conditioned perennial water body (or bodies) where decantation took place (east, south and southeast sides). The structural contour map of the Rio Claro Formation base indicates a NW/SE trough which was the main depositional axis. The integrated analysis demonstrates that the formation is formed by lacustrine, fluvial and debris flows deposits whose source area was located on NW side, with coalescent alluvial fans from where braided to psamitic meandering fluvial channels came. The location of the source area suggests no link with the Corumbataf River paleo-terraces.

Paleoambiente e proveniência da formação cabeças da bacia do Parnaíba: evidências da glaciação famenniana e implicações na potencialidade do reservatório

O histórico de prospecção de hidrocarbonetos da Bacia Paleozoica do Parnaíba, situada no norte-nordeste do Brasil, sempre foi considerado desfavorável quando comparado aos super-reservatórios estimados do Pré-Sal das bacias da Margem Atlântica e até mesmo interiores, como a Bacia do Solimões. No entanto, a descoberta de gás natural em depósitos da superseqüência mesodevoniana-eocarbonífera do Grupo Canindé, que incluem as formações Pimenteiras, Cabeças e Longá, impulsionou novas pesquisas no intuito de refinar a caracterização paleoambiental, paleogeográfica, bem como, entender o sistema petrolífero, os possíveis plays e a potencialidade do reservatório Cabeças. A avaliação faciológica e estratigráfica com ênfase no registro da tectônica glacial, em combinação com a geocronologia de zircão detrítico permitiu interpretar o paleoambiente e a proveniência do reservatório Cabeças. Seis associações de fácies agrupadas em sucessões aflorantes, com espessura máxima de até 60m registram a evolução de um sistema deltaico Devoniano influenciado por processos glaciais principalmente no topo da unidade. 1) frente deltaica distal, composta por argilito maciço, conglomerado maciço, arenito com acamamento maciço, laminação plana e estratificação cruzada sigmoidal 2) frente deltaica proximal, representada pelas fácies arenito maciço, arenito com laminação plana, arenito com estratificação cruzada sigmoidal e conglomerado maciço; 3) planície deltaica, representada pelas fácies argilito laminado, arenito maciço, arenito com estratificação cruzada acanalada e conglomerado maciço; 4) shoreface glacial, composta pelas fácies arenito com marcas onduladas e arenito com estratificação cruzada hummocky; 5) depósitos subglaciais, que englobam as fácies diamictito maciço, diamictito com pods de arenito e brecha intraformacional; e 6) frente deltaica de degelo, constituída pelas fácies arenito maciço, arenito deformado, arenito com laminação plana, arenito com laminação cruzada cavalgante e arenito com estratificação cruzada sigmoidal. Durante o Fammeniano (374-359 Ma) uma frente deltaica dominada por processos fluviais progradava para NW (borda leste) e para NE (borda oeste) sobre uma plataforma influenciada por ondas de tempestade (Formação Pimenteiras). Na borda leste da bacia, o padrão de paleocorrente e o espectro de idades U-Pb em zircão detrítico indicam que o delta Cabeças foi alimentado por áreas fonte situadas a sudeste da Bacia do Parnaíba, provavelmente da Província Borborema. Grãos de zircão com idade mesoproterozóica (~ 1.039 – 1.009 Ma) e neoproterozóica (~ 654 Ma) são os mais populosos ao contrário dos grãos com idade arqueana (~ 2.508 – 2.678 Ma) e paleoproterozóica (~ 2.054 – 1.992 Ma). O grão de zircão concordante mais novo forneceu idade ²⁰⁶Pb/²³⁸U de 501,20 ± 6,35 Ma (95% concordante) indicando idades de áreas-fonte cambrianas. As principais fontes de sedimentos do delta Cabeças na borda leste são produto de rochas do Domínio Zona Transversal e de plútons Brasilianos encontrados no embasamento a sudeste da Bacia do Parnaíba, com pequena contribuição de sedimentos oriundos de rochas do Domínio Ceará Central e da porção ocidental do Domínio Rio Grande do Norte. No Famenniano, a movimentação do supercontinente Gondwana para o polo sul culminou na implantação de condições glaciais concomitantemente com o rebaixamento do nível do mar e exposição da região costeira. O avanço das geleiras sobre o embasamento e depósitos deltaicos gerou erosão, deposição de diamictons com clastos exóticos e facetados, além de estruturas glaciotectônicas tais como plano de descolamento, foliação, boudins, dobras, duplex, falhas e fraturas que refletem um cisalhamento tangencial em regime rúptil-dúctil. O substrato apresentava-se inconsolidado e saturados em água com temperatura levemente abaixo do ponto de fusão do gelo (permafrost quente). Corpos podiformes de arenito imersos em corpos lenticulares de diamicton foram formados pela ruptura de camadas pelo cisalhamento subglacial. Lentes de conglomerados esporádicas (dump structures) nos depósitos de shoreface sugere queda de detritos ligados a icebergs em fases de recuo da geleira. A elevação da temperatura no final do Famenniano reflete a rotação destral do Gondwana e migração do polo sul da porção ocidental da América do Sul e para o oeste da África. Esta nova configuração paleogeográfica posicionou a Bacia do Parnaíba em regiões subtropicais iniciando o recuo de geleiras e a influência do rebound isostático. O alívio de pressão é indicado pela geração de sills e diques clásticos, estruturas ball-and-pillow, rompimento de camadas e brechas. Falhas de cavalgamento associadas à diamictitos com foliação na borda oeste da bacia sugerem que as geleiras migravam para NNE. O contínuo aumento do nível do mar relativo propiciou a instalação de sedimentação deltaica durante o degelo e posteriormente a implantação de uma plataforma transgressiva (Formação Longá). Diamictitos interdigitados com depósitos de frente deltaica na porção superior da Formação Cabeças correspondem a intervalos com baixo volume de poros e podem representar trapas estratigráficas secundárias no reservatório. As anisotropias primárias subglaciais do topo da sucessão Cabeças, em ambas as bordas da Bacia do Parnaíba, estende a influência glacial e abre uma nova perspectiva sobre a potencialidade efetiva do reservatório Cabeças do sistema petrolífero Mesodevoniano-Eocarbonífero da referida bacia.

Paleoambiente e diagênese da formação Itaituba, carbonífero da bacia do Amazonas, com base em testemunho de sondagem, região de Uruará, Pará

A Formação Itaituba de idade carbonífera representa a sedimentação carbonática de depósitos transgressivos do Grupo Tapajós da Bacia do Amazonas. A sucessão Itaituba é interpretada como depósitos de planície de maré mista, constituídos de calcários fossilíferos, dolomitos finos, arenitos finos a grossos e subordinadamente siltitos avermelhados, evaporitos e folhelhos negros. A análise de fácies e microfácies do testemunho de sondagem da região de Uruará, Estado do Pará, permitiu individualizar dezenove fácies agrupadas em cinco associações: planície de maré (AF1), canal de maré (AF2), laguna (AF3), barra bioclástica (AF4) e plataforma externa (AF5). AF1 é composta por arenito fino com rip-up clasts e gretas de contração, marga com grãos de quartzo e feldspato, dolomudstone laminado com grãos terrígenos e dolomito fino silicificado, com intercalação de argilito com grãos de quartzo disseminados, dolomitizado e localmente com sílica microcristalina. AF2 consiste em arenito médio a grosso com estratificação cruzada acanalada, recoberta por filmes pelíticos nos foresets, arenito muito fino a fino com acamamento wavy, siltito laminado com falhas sinsedimentares e acamamento convoluto. AF3 é constituída de siltito vermelho maciço, mudstone com fósseis, floatstone com braquiópodes e pirita disseminada e mudstone maciço com frequentes grãos de quartzo. AF4 e AF5 exibem abundantes bioclastos representados por espinhos e fragmentos de equinodermas, conchas, fragmentos e espinhos de braquiópodes, ostracodes, foraminíferos, algas vermelhas e conchas de bivalves. AF4 é formada por grainstone oolítico fossilífero e grainstone com terrígenos principalmente grãos de quartzo monocristalino e AF5 se compõe de wackestone fossilífero, wackestone com terrígenos e mudstone maciço com grãos de quartzo monocristalino. Subarcósios (AF1), arcósios (AF2) e arcósios líticos (AF2) são os tipos de arenitos da sucessão Itaituba e apresentam como principais constituintes grãos de quartzo monocristalino e policristalino, K-feldspato, plagioclásio, pirita, muscovita detrítica, fragmento de rocha pelítica, metamórfica e chert e raros bioclastos. O cimento é de calcita espática não ferrosa, óxido/hidróxido de ferro e sobrecrescimento de sílica. A porosidade é intergranular, móldica e às vezes alongada, sem permeabilidade perfazendo até 11% da rocha. Os processos diagenéticos dos arenitos são compactação física, sobrecrescimento de sílica, cimentação de calcita, formação de matriz diagenética, compactação química, substituição de grãos, autigênese de pirita, formação de óxido/hidróxido de ferro e alteração do plagioclásio. Os processos diagenéticos dos carbonatos são: micritização, neomorfismo, colomitização, fraturamento, compactação química, cimentação de calcita, dissolução secundária e autigênese de minerais. A sucessão da Formação Itaituba representa um sistema de laguna/planície de maré ligada a uma plataforma marinha carbonática. Planícies de maré desenvolveram-se nas margens das lagunas e eram periodicamente supridas por influxos de terrígenos finos (silte) que inibiam a precipitação carbonática. Barras bioclásticas eram cortadas por canais de maré (inlet) que conectavam a laguna com a plataforma rasa rica em organismos bentônicos.

Microbialitos da formação Codó (Aptiano Superior) às margens do rio Tocantins em São Miguel do Tocantins (TO)

The southwestern region of the São Luís-Grajaú Basin has a rare outcrop of the Codó Formation (upper Aptian) with seven outstanding microbialite bioherms along the left margin of the Tocantins river, near Imperatriz (MA). Resting on sandstones of the Grajaú Formation, the Codó Formation presents: 1) a 20 cm thick basal calcilutite with gypsite pseudomorphs and some fossil tree stems; 2) metric dark shales with carbonate nodules and thin intercalated carbonate layers, enclosing some microbial laminites; 3) a 2 cm thick upper breccia composed of microbialite fragments and other carbonate clasts, with halite hoppers on the top; 4) the carbonate bioherms, which partially overlie the extensive shales and interrupt them laterally, as well as the breccia. The bioherms in the northern part of the outcrop are thicker (<2 m) and have interbedded dark shales, whereas the southern are thinner and continuous in the vertical direction. In general, they are composed of irregular gently to strongly wavy microbial laminites, sometimes with pseudocolumnar to conical lamination. All microbialites with highest synoptic relief (<20 cm) look like columnar stromatolites on weathered lateral expositions. In plan view, the horizontal sections of these microbialites are circular to slightly elliptic, sometimes forming very small channels (N60W) filled with fine breccia. The highest bed of the northern bioherm has mixed microbial laminites and columnar stromatolites, where intercolumnar spaces were filled with microbialite clasts, fish bones, plant fragments and very small probable crustacean coprolites. Several fractures and deformation in this upper bed indicate an initial brecciation process probably caused by subaerial exposure. In microscopic scale, the lamination is smooth, diffuse, defined by subtle granulation differences of very fine granular calcite crystals within micrite, but oxide levels, dissolution surfaces or thin precipitated calcite veneers...

Sucessão estratigráfica e tratos de sistemas do Membro Romualdo, porção leste da Bacia do Araripe, nordeste do Brasil

Located in northeastern Brazil, the evolution of Araripe Basin has been associated with the fragmentation of Gondwana and opening of the South Atlantic. The Santana Formation belongs to the post-rift sequence of the basin and is characterized by the presence of laminated limestones in the lower portion (Mb. Crato), evaporite (Ipubi) and siliciclastics (Mb. Romualdo). For better understanding of the Romualdo's stratigraphy, depositional environments and tract of systems, a stratigraphic analysis was made with representative columnar sections of the unit. Sedimentary facies have been described in detail, as well as paleocurrents measured at different stratigraphic levels. It was found that the contact of Mb. Romualdo with the carbonate-evaporite section (Mbs. Crato and Ipubi) is a unconformity, evidenced by residual lags and thin layers of conglomerates above the contact. Above the conglomeratic levels predominate fine sandstones / medium interlayered with calciferous green shales. The percentage of shales increases towards the top, featuring retrogradational stacking culminating in layers of coquinas, excellent stratigraphic mark in the basin. Thin layers of coquins of gastropods comprising equinoids, located on the shale section, present in three sections marine deposits are associated with surfaces ravine. The upper section is characterized by recurrent facies of green shales, sandstones intercalated with sandstones progressively become more frequent towards the top of the unit, featuring the regressive part of the cycle. The sandstones present cross-stratification, often with mud clasts and clay layers in the foresets, and beddings of flaser type and wavy in heterolitic facies, suggesting the action of tidal currents. Paleocurrents measured in the sandstones show gaps with opposite flow directions outlining bipolar standards, which reinforce the interpretation of shallow marine environment influenced by tides during the sedimentation...

Diversity of lithologic components at Meridiani Planum, Mars: Insights from Mössbauer spectroscopic investigations

The two Mars Exploration Rovers (MER), Spirit and Opportunity, landed on the Martian surface in January 2004 and have since collected a wealth of information about their landing sites. As part of their payload, the miniaturised Mössbauer spectrometer MIMOS II contributes to the success of the mission by identifying Iron-bearing minerals and by determining Iron oxidation states in them. The basis of this work is the data set obtained at Opportunity’s landing site at Meridiani Planum. A portion of this data set is evaluated with different methods, with the aim to thoroughly characterize lithologic components at Meridiani Planum and possible relations between them.rnMIMOS II is able to measure Mössbauer spectra at different energies simultaneously, bearing information from different sampling depths of the investigated target. The ability of depth-selective Mössbauer spectroscopy to characterize weathered surface layers is illustrated through its application to two suitable rock targets that were investigated on Mars. In both cases, an enhanced concentration of Iron oxides at the rock surface was detected, pointing to a low degree of aqueous alteration. rnThe mineral hematite (α-Fe2O3) is present in the matrix of outcrop rocks and in spherules weathering from the outcrop. Simultaneous fitting of Mössbauer spectra was applied to data sets obtained on both target types to characterize the hematite component in detail. This approach reveals that two hematite populations are present, both in the outcrop matrix as well as in spherules. The hematite component with a comparably high degree of crystallinity and/or chemical purity is present in the outcrop matrix. The investigation of hematite at Meridiani Planum has shown that simultaneous fitting is a suitable and useful method to evaluate a large, correlated set of Mössbauer spectra.rnOpportunity encountered loose, cm-sized rocks along its traverse. Based on their composition and texture, these “cobbles” can be divided into three different groups. Outcrop fragments are impact-derived ejecta from local outcrop rocks. Cobbles of meteoritic origin contain the minerals kamacite (Fe,Ni) and troilite (FeS) and exhibit high Ni contents. Melt-bearing impact breccias bear similarities to local outcrop rocks and basaltic soil, with a phase composition and texture consistent with a formation scenario involving partial melting and inclusion of small, bright outcrop clasts. rnIron meteorites on the Martian surface experience weathering through the presence of even trace amounts of water due to their metallic nature. Opportunity encountered and investigated four Iron meteorites, which exhibit evidence for physical and chemical weathering. Discontinuous coatings contain Iron oxides, pointing to the influence of limited amounts of water. rnA terrestrial analogue site for Meridiani Planum is the Rio Tinto basin in south-west Spain. With its deposits of sulfate- and iron-oxide-bearing minerals, the region provides an adequate test bed for instrumentation for future Mars missions. In-situ investigations at Rio Tinto were carried out with a special focus on the combined use of Mössbauer spectroscopy with MIMOS II and Raman spectroscopy with a field-portable instrument. The results demonstrate that the two instruments provide complementary information about investigated samples.

Active processes, morphology, and dynamics of icy debris fans: Landform evolution along rapidly degrading escarpments in alpine regions undergoing recent deglaciation

In the past few decades the impacts of climate warming have been significant in alpine glaciated regions. Many valley glaciers formerly linked as distributary glaciers to high-level icecaps have decoupled at their icefalls, exposing major escarpments and generating a suite of dynamic landforrns dominated by mass wasting. Ice-dominated landforms, here termed icy debris fans, develop rapidly by ice avalanching, rockfall, and icy debris flow. Field-based reconnaissance studies at two alpine settings, the Wrangell Mountains of Alaska and the Southern Alps of New Zealand, provide a preliminary morphogenetic model of spatial and temporal evolution of icy debris fans in a range of alpine settings. The influence of these processes on landform evolution is largely unrecognized in the literature dealing with post-glacial landform adjustment known as the paraglacial. A better understanding of these dynamic processes will be increasingly important because of the extreme geohazards characterizing these areas. Our field studies show that after glacier decoupling, icy debris fans begin to form along the base of bedrock escarpments at the mouths of catchments and prograde over valley glaciers. The presence of a distinct catchment, apex, and fan morphology distinguishes these landforms from other landforms common in periglacial hillslope settings receiving abundant clastic debris and ice. Ice avalanching is the most abundant process involved in icy debris fan formation. Fans developed below weakly incised catchments are dominated by ice avalanching and are composed primarily of ice with minor lithic detritus. Typically, avalanches fall into the fan catchments where sediments transform into grainflows that flow onto the fans. Once on the fans, avalanche deposits ablate rapidly, flattening and concentrating lithic fragments at the surface. Icy debris fans may become thick enough to become glaciers with splay crevasse systems. Fans developed below larger, more complex catchments are composed of higher proportions of lithic detritus resulting from temporary storage of ice and lithic detritus deposits within the catchment. Episodic outbursts of meltwater from the icecap may mix with the stored sediments and mobilize icy debris flows (mixture of ice and lithic clasts) onto the fans. Our observations indicate that the entire evolutionary cycle of icy debris fans probably occurs during an early paraglacial interval (i.e., decades to 100 years). Observations comparing avalanche frequency, volume, and fan morphologic evolution at the Alaska site between 2006 and 2010 illustrate complex response between icy debris fans even within the same cirque - where one fan may be growing while others are downwasting because of differences in ice supply controlled by their respective catchments and icecap contributions. As ice supply from the icecap diminishes through time, icy debris fans rapidly downwaste and eventually evolve into talus cones that receive occasional but ephemeral ice avalanches.

Provenance signature of a forearc basin modified by spreading ridge subduction: Detrital zircon geochronology and detrital modes from the Paleogene Arkose Ridge Formation, southern Alaska

Upper Paleocene–Eocene boulder conglomerate, cross-stratified sandstone, and laminated carbonaceous mudstone of the Arkose Ridge Formation exposed in the southern Talkeetna Mountains record fluvial-lacustrine deposition proximal to the volcanic arc in a forearc basin modified by Paleogene spreading ridge subduction beneath southern Alaska. U-Pb ages of detrital zircon grains and modal analyses were obtained from stratigraphic sections spanning the 2,000 m thick Arkose Ridge Formation in order to constrain the lithology, age, and location of sediment sources that provided detritus. Detrital modes from 24 conglomerate beds and 54 sandstone thin sections aredominated by plutonic and volcanic clasts and plagioclase feldspar with minor quartz, schist, hornblende, argillite, and metabasalt. Westernmost sandstone and conglomerate strata contain <5% volcanic clasts whereas easternmost sandstone and conglomerate strata contain 40 to >80% volcanic clasts. Temporally, eastern sandstones andconglomerates exhibit an upsection increase in volcanic detritus from <40 to >80% volcanic clasts. U-Pb ages from >1400 detrital zircons in 15 sandstone samples reveal three main populations: late Paleocene–Eocene (60-48 Ma; 16% of all grains), Late Cretaceous–early Paleocene (85–60 Ma; 62%) and Jurassic–Early Cretaceous (200–100 Ma; 12%). A plot of U/Th vs U-Pb ages shows that >97% of zircons are <200 Ma and>99% of zircons have <10 U/Th ratios, consistent with mainly igneous source terranes. Strata show increased enrichment in late Paleocene–Eocene detrital zircons from <2% in the west to >25% in the east. In eastern sections, this younger age population increases temporally from 0% in the lower 50 m of the section to >40% in samples collected >740 m above the base. Integration of the compositional and detrital geochronologic data suggests: (1) Detritus was eroded mainly from igneous sources exposed directly north of the Arkose Ridge Formation strata, mainly Jurassic–Paleocene plutons and Paleocene–Eocenevolcanic centers. Subordinate metamorphic detritus was eroded from western Mesozoic low-grade metamorphic sources. Subordinate sedimentary detritus was eroded from eastern Mesozoic sedimentary sources. (2) Eastern deposystems received higher proportions of juvenile volcanic detritus through time, consistent with construction of adjacent slab-window volcanic centers during Arkose Ridge Formation deposition. (3)Western deposystems transported detritus from Jurassic–Paleocene arc plutons that flank the northwestern basin margin. (4) Metasedimentary strata of the Chugach accretionaryprism, exposed 20-50 km south of the Arkose Ridge Formation, did not contribute abundant detritus. Conventional provenance models predict reduced input of volcanic detritus to forearc basins during exhumation of the volcanic edifice and increasing exposure ofsubvolcanic plutons (Dickinson, 1995; Ingersoll and Eastmond, 2007). In the forearc strata of these conventional models, sandstone modal analyses record progressive increases upsection in quartz and feldspar concomitant with decreases in lithic grains, mainly volcanic lithics. Additionally, as the arc massif denudes through time, theyoungest detrital U-Pb zircon age populations become significantly older than the age of forearc deposition as the arc migrates inboard or ceases magmatism. Westernmost strata of the Arkose Ridge Formation are consistent with this conventional model. However, easternmost strata of the Arkose Ridge Formation contain sandstone modes that record an upsection increase in lithic grains accompanied by a decrease in quartz and feldspar, and detrital zircon age populations that closely match the age of deposition. This deviation from the conventional model is due to the proximity of the easternmost strata to adjacent juvenile volcanic rocks emplaced by slab-window volcanic processes. Provenance data from the Arkose Ridge Formation show that forearc basins modified by spreading ridge subduction may record upsection increases in non-arc, syndepositional volcanic detritusdue to contemporaneous accumulation of thick volcanic sequences at slab-window volcanic centers. This change may occur locally at the same time that other regions of the forearc continue to receive increasing amounts of plutonic detritus as the remnant arc denudes, resulting in complex lateral variations in forearc basin petrofacies and chronofacies.

Catastrophic Flooding In North-Central Pennsylvania: Geomorphic Findings From The September 2011 Event And Their Significance To

Tropical Storm Lee produced 25-36 cm of rainfall in north-central Pennsylvania on September 4th through 8th of 2011. Loyalsock Creek, Muncy Creek, and Fishing Creek experienced catastrophic flooding resulting in new channel formation, bank erosion, scour of chutes, deposition/reworking of point bars and chute bars, and reactivation of the floodplain. This study was created to investigate aspects of both geomorphology and sedimentology by studying the well-exposed gravel deposits left by the flood, before these features are removed by humans or covered by vegetation. By recording the composition of gravel bars in the study area and creating lithofacies models, it is possible to understand the 2011 flooding. Surficial clasts on gravel bars are imbricated, but the lack of imbrication and high matrix content of sediments at depth suggests that surface imbrication of the largest clasts took place during hyperconcentrated flow (40-70% sediment concentration). The imbricated clasts on the surface are the largest observed within the bars. The lithofacies recorded are atypical for mixed-load stream lithofacies and more similar to glacial outburst flood lithofacies. This paper suggests that the accepted lithofacies model for mixed-load streams with gravel bedload may not always be useful for interpreting depositional systems. A flume study, which attempted to duplicate the stratigraphy recorded in the field, was run in order to better understand hyperconcentrated flows in the study area. Results from the study in the Bucknell Geology Flume Laboratory indicate that surficial imbrication is possible in hyperconcentrated conditions. After flooding the flume to entrain large amounts of sand and gravel, deposition of surficially imbricated gravel with massive or upward coarsening sedimentology occurred. Imbrication was not observed at depth. These experimental flume deposits support our interpretation of the lithofacies discovered in the field. The sizes of surficial gravel bar clasts show clear differences between chute and point bars. On point bars, gravels fine with increasing distance from the channel. Fining also occurs at the downstream end of point bars. In chute deposits, dramatic fining occurs down the axis of the chute, and lateral grain sizes are nearly uniform. Measuring the largest grain size of sandstone clasts at 8-11 kilometer intervals on each river reveals anomalies in the downstream fining trends. Gravel inputs from bedrock outcrops, tributaries, and erosion of Pleistocene outwash terraces may explain observed variations in grain size along streams either incised into the Appalachian Plateau or located near the Wisconsinan glacial boundary. Atomic Mass Spectrometry (AMS) radiocarbon dating of sediment from recently scoured features on Muncy Creek and Loyalsock Creek returned respective ages of 500 BP and 2490 BP. These dates suggest that the recurrence interval of the 2011 flooding may be several hundred to several thousand years. This geomorphic interval of recurrence is much longer then the 120 year interval calculated by the USGS using historical stream gauge records.