Nonlinear behavior of TiO2 center dot Ta2O5 center dot MnO2 material doped with BaO and Bi2O3

A study was made on the effect of the addition of BaO (0.025-0.05 mol%) and Bi2O3 (0.025-0.05 mol%) to the TiO2.Ta2O5.MnO2 material. The samples were characterized by X-ray diffraction, and current-voltage measurements were accomplished for determination of the nonlinear coefficient. An analysis was made to evaluate the microstructural characteristics of the materials. The most appropriate sintering conditions for the materials were analyzed with the purpose of obtaining the best nonlinear coefficient associated with the smallest breakdown electric field. After sintering at 1400 degreesC for 2 h, a low-voltage (30 V cm(-1)) varistor was obtained, which, however, presented a low nonlinear coefficient (6). It was found that the sintering conditions must be controlled in order to improve the electrical properties of these materials. (C) 2004 Elsevier B.V. All rights reserved.

Electrostatic force microscopy as a tool to estimate the number of active potential barriers in dense non-Ohmic polycrystalline SnO2 devices

In the present work, electroactive grain boundaries of highly dense metal oxide SnO2-based polycrystalline varistors were determined by electrostatic force microscopy (EFM). The EFM technique was applied to identify electroactive grain boundaries and thus estimate the amount of active grain boundary, which, in the metal oxide SnO2-based varistor, was calculated at around 85%, i.e., much higher than that found in traditional metal oxide ZnO-based varistors. The mean potential barrier height value obtained from the EFM analysis was in complete agreement with the values calculated from the C-V measurements, together with a complex capacitance plane analysis that validates the methodology proposed here. (c) 2006 American Institute of Physics.

Improved Conductivity Induced by Photodesorption in SnO2 Thin Films Grown by a Sol-Gel Dip Coating Technique

Thin films of undoped and Sb-doped SnO2 have been prepared by a sol-gel dip-coating technique. For the high doping level (2-3 mol% Sb) n-type degenerate conduction is expected, however, measurements of resistance as a function of temperature show that doped samples exhibit strong electron trapping, with capture levels at 39 and 81 meV. Heating in a vacuum and irradiation with UV monochromatic light (305 nm) improve the electrical characteristics, decreasing the carrier capture at low temperature. This suggests an oxygen related level, which can be eliminated by a photodesorption process. Absorption spectral dependence indicates an indirect bandgap transition with Eg ≅ 3.5 eV. Current-voltage characteristics indicate a thermionic emission mechanism through interfacial states.

A new design methodology for multipulse rectifiers with Delta auto-connected transformers and a retrofit application in Adjustable Speed Drives (ASDs)

Multipulse rectifiers can replace a conventional six pulse three-phase rectifier (diode bridge) providing a DC voltage with low ripple, low Total Harmonic Distortion of current (THDi) and a high Power Factor (PF). In this context is presented a multipulse rectifier with generalized Delta-differential autotransformer topology, which can provide any level of DC output voltage for any level of three-phase AC input voltage. This paper presents all the possible configurations for Delta topology in order to choose, through graphics, one configuration that presents reduced weight and volume. The average voltage on the DC bus must be compatible with the DC voltage in the six pulse rectifier used in commercial ASDs. Therefore, it is possible to apply the retrofit technique to replace the conventional bridge rectifier by the proposed multipulse rectifier. Based on mathematic models and simulation results, an 18-pulse rectifier with Delta topology, 220 V of line voltage, 315 V of DC output, and rating 2.5 kW of power was designed, implemented and applied for three different commercial ASDs. Experimental results as voltage and current waveforms and results about PF and THDi will be presented. © 2012 IEEE.

Deposition and photo-induced electrical resistivity of dip-coated NiO thin films from a precipitation process

Thin films of the semiconductor NiO are deposited using a straightforward combination of simple and versatile techniques: the co-precipitation in aqueous media along with the dip- coating process. The obtained material is characterized by gravimetric/differential thermal analysis (TG-DTA) and X-ray diffraction technique. TG curve shows 30 % of total mass loss, whereas DTA indicates the formation of the NiO phase about 578 K (305 C). X-ray diffraction (XRD) data confirms the FCC crystalline phase of NiO, whose crystallinity increases with thermal annealing temperature. UV-Vis optical absorption measurements are carried out for films deposited on quartz substrate in order to avoid the masking of bandgap evaluation by substrate spectra overlapping. The evaluated bandgap is about 3.0 eV. Current-voltage (I-V) curves measured for different temperatures as well as the temperature-dependent resistivity data show typical semiconductor behavior with the resistivity increasing with the decreasing of temperature. The Arrhenius plot reveals a level 233 meV above the conduction band top, which was attributed to Ni2+ vacancy level, responsible for the p-type electrical nature of NiO, even in undoped samples. Light irradiation on the films leads to a remarkable behavior, because above bandgap light induced a resistivity increase, despite the electron-hole generation. This performance was associated with excitation of the Ni 2+ vacancy level, due to the proximity between energy levels. © 2012 Springer Science+Business Media New York.

Tuning the nanostructure of DODAB/nickel tetrasulfonated phthalocyanine bilayers in LbL films

Nanostructured films of dioctadecyldimethylammonium bromide (DODAB) and nickel tetrasulfonated phthalocyanine (NiTsPc) were layer-by-layer (LbL) assembled to achieve a synergistic effect considering the distinct properties of both materials. Prior to LbL growth, the effect of NiTsPc on the structure of DODAB vesicles in aqueous medium was investigated by differential scanning calorimetry (DSC). Therefore, DODAB/NiTsPc LbL films were prepared using NiTsPc at concentrations below and above the limit concentration of vesicle formation according to our DSC experiments. As a result, LbL films with distinct nanostructures were obtained, which were studied at micro and nanoscales by micro-Raman and atomic force microscopy, respectively. A linear growth of the LbL films was observed by ultraviolet-visible absorption spectroscopy. However, the bilayer thickness and the surface morphology of the LbL films were radically affected depending on NiTsPc concentration. The electrostatic interaction between DODAB and NiTsPc was identified via Fourier transform infrared (FTIR) absorption spectroscopy as the main driving force responsible for LbL growth. Because LbL films have been widely applied as transducers in sensing devices, DODAB/NiTsPc LbL films having distinct nanostructures were tested as proof-of-principle in preliminary sensing experiments toward dopamine detection using impedance spectroscopy (e-tongue system). The real capacitance vs. dopamine concentration curves were treated using Principal Component Analysis (PCA) and an equivalent electric circuit, revealing the role played by the LbL film nanostructure and the possibility of building calibration curves. © 2013 Elsevier B.V.

Label free redox capacitive biosensing

A surface confined redox group contributes to an interfacial charging (quantifiable by redox capacitance) that can be sensitively probed by impedance derived capacitance spectroscopy. In generating mixed molecular films comprising such redox groups, together with specific recognition elements (here antibodies), this charging signal is able to sensitively transduce the recognition and binding of specific analytes. This novel transduction method, exemplified here with C-reactive protein, an important biomarker of cardiac status and general trauma, is equally applicable to any suitably prepared interfacial combination of redox reporter and receptor. The assays are label free, ultrasensitive, highly specific and accompanied by a good linear range. © 2013 Elsevier B.V.

Caracterização elétrica e microestrutural de cerâmicas varistoras de baixa tensão à base de ('SN IND.1-x''TI IND.x')'O IND.2' e 'SN''O IND.2' dopados com 'CO''O' e 'NB IND.2''O IND.5'

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

TNF alpha contributes for attenuating both Y(397)FAK and Y(416)Src phosphorylations in osteoblasts

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Epitheliotropic cutaneous T-cell lymphoma associated with melanoma in a dog: case report

Several types of tumors affect dogs' skin. Simultaneously occurring neoplasms with different histological patterns might be rarely present in the same animal. This paper describes the occurrence of epitheliotropic cutaneous T-cell lymphoma and melanoma in a dog. The animal had nodular lesions in the abdominal region and serpiginous plaques on the dorsal region of the trunk. Cytology evidenced malignant fusiform cells from the abdominal lesions as well as few round cells from the dorsal. The histopathological examination of the abdominal lesions showed dermis with polygonal to spindle-shaped neoplastic cells. The lesion of the dorsal region evidenced neoplastic round cells with generally distinct cell borders and a moderate amount of eosinophilic cytoplasm. Abdominal lesions were positive for Melan A. Dorsal and forelimb lesions were positive for CD3. This study reports the occurrence of epitheliotropic cutaneous T-cell lymphoma and malignant melanoma in a crossbred Boxer dog and discusses the importance of performing immunohistochemical profile to confirm the phenotype of the tumor.

Thermal inkjet printing of copper tetrasulfonated phthalocyanine (CuTsPc) as a semiconducting layer on flexible MIS capacitors

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Revealing archaeal diversity patterns and methane fluxes in Admiralty Bay, King George Island, and their association to Brazilian Antarctic Station activities

The study of Antarctic archaeal communities adds information on the biogeography of this group and helps understanding the dynamics of biogenic methane production in such extreme habitats. Molecular methods were combined to methane flux determinations in Martel Inlet, Admiralty Bay, to assess archaeal diversity, to obtain information about contribution of the area to atmospheric methane budget and to detect possible interferences of the Antarctic Brazilian Station Comandante Ferraz (EACF) wastewater discharge on local archaeal communities and methane emissions. Methane fluxes in Martel Inlet ranged from 3.2 to 117.9 mu mol CH(4) m(-2) d(-1), with an average of 51.3 +/- 8.5 mu mol CH(4) m(-2) d(-1) and a median of 57.6 mu mol CH(4) m(-2)d(-1). However, three negative fluxes averaging -11.3 mu mol CH(4) m(-2) d(-1) were detected in MacKellar Inlet, indicating that Admiralty Bay can be either a source or sink of atmospheric methane. Denaturing gradient gel electrophoresis (DGGE) showed that archaeal communities at EACF varied with depth and formed a group separated from the reference sites. Granulometric analysis indicated that differences observed may be mostly related to sediment type. However, an influence of wastewater input could not be discarded, since higher methane fluxes were found at CF site. suggesting stimulation of local methanogenesis. DGGE profile of the wastewater sample grouped separated from all other samples, suggesting that methanogenesis stimulation may be due to changes in environmental conditions rather than to the input of allochtonous species from the wastewater. 16S ribosomal DNA clone libraries analysis showed that all wastewater sequences were related to known methanogenic groups belonging to the hydrogenotrophic genera Methanobacterium and Methanobrevibacter and the aceticlastic genus Methanosaeta. EACF and Botany Point sediment clone libraries retrieved only groups of uncultivated Archaea, with predominance of Crenarchaeota representatives (MCG, MG1, MBG-B, MBG-C and MHVG groups). Euryarchaeota sequences found were mostly related to the LDS and RC-V groups, but MBG-D and DHVE-5 were also present. No representatives of cultivated methanogenic groups were found, but coverage estimates suggest that a higher number of clones would have to be analyzed in order to cover the greater archaeal diversity of Martel Inlet sediment. Nevertheless, the analysis of the libraries revealed groups not commonly found by other authors in Antarctic habitats and also indicated the presence of groups of uncultivated archaea previously associated to methane rich environments or to the methane cycle. (C) 2010 Elsevier Ltd. All rights reserved.

Pulmonary hypertension diagnosed by right heart catheterisation in sickle cell disease

Recent studies have recognised the importance of pulmonary hypertension (PH) in sickle cell disease (SCD). The aim of this study was to determine the prevalence and prognostic impact of PH and its features in patients with SCD. 80 patients with SCD underwent baseline clinical evaluation, laboratory testing, 6-min walk tests (6MWTs) and echocardiography. Patients with a peak tricuspid regurgitant jet velocity (TRV) of >= 2.5 m.s(-1) were further evaluated through right heart catheterisation (RHC) to assure the diagnosis of PH. Our study evidenced a 40% prevalence of patients with elevated TRV at echocardiography. RHC (performed in 25 out of 32 patients) confirmed PH in 10% (95% CI 3.4-16.5%) of all patients, with a prevalence of post-capillary PH of 6.25% (95% CI 0.95-11.55%) and pre-capillary PH of 3.75% (95% CI -0.4-7.9%). Patients with PH were older, had worse performance in 6MWTs, and more pronounced anaemia, haemolysis and renal dysfunction. Survival was shorter in patients with PH. Our study reinforced the use of echocardiography as a screening tool for PH in SCD and the mandatory role of RHC for proper diagnosis. Our findings confirmed the prognostic significance of PH in SCD as its association to pronounced haemolytic profile.

Electrical spectroscopy of rubrene bulk and thin film crystals

One of the most diffused electronic device is the field effect transistor (FET), contained in number of billions in each electronic device. Organic optoelectronics is an emerging field that exploits the unique properties of conjugated organic materials to develop new applications that require a combination of performance, low cost and processability. Organic single crystals are the material with best performances and purity among the variety of different form of organic semiconductors. This thesis is focused on electrical and optical characterization of Rubrene single crystal bulk and thin films. Rubrene bulk is well known but for the first time we studied thin films. The first Current-voltage characterization has been performed for the first time on three Rubrene thin films with three different thickness to extract the charge carriers mobility and to assess its crystalline structure. As results we see that mobility increase with thickness. Field effect transistor based on Rubrene thin films on $SiO_2$ have been characterize by current-voltage (I-V) analyses (at several temperatures) and reveals a hopping conduction. Hopping behavior probably is due to the lattice mismatch with the substrate or intrinsic defectivity of the thin films. To understand effects of contact resistance we tested thin films with the Transmission Line Method (TLM) method. The TLM method revealeds that contact resistance is negligible but evidenced a Schottky behavior in a limited but well determined range of T. To avoid this effect we carried out annealing treatment after the electrode evaporation iswe performed a compete I-V characterization as a function of in temperature to extract the electronic density of states (DOS) distribution through the Space Charge Limited Current (SCLC) method. The results show a DOS with an exponential trenddistribution, as expected. The measured mobility of thin films is about 0.1cm^2/Vs and it increases with the film thickness. Further studies are necessary to investigate the reason and improve performances. From photocurrent spectrum we calculated an Eg of about 2.2eV and both thin films and bulk have a good crystal order. Further measurement are necessary to solve some open problems

Pollen records of 11 profiles from Wendland in northern Germany

1) Ingesamt 11 Profile aus sechs Mooren und Seen im Gebiet des Hannoverschen Wendlandes wurden pollenanalytisch untersucht. Die Ablagerungen umfassen den Zeitraum vom Beginn der Älteren Tundrenzeit bis zur Gegenwart. 2) Die Waldgeschichte des Hannoverschen Wendlandes weist teils Merkmale der atlantisch geprägten Gebiete Nordwestdeutschlands, teils solche des kontinental beeinflußten nordostdeutschen Raumes auf und nimmt damit eine Zwischenstellung ein. 3) Die Kiefer wandert zu Beginn der Allerödzeit ein, d.h. später als im mecklenburgisch-märkischen Gebiet und im mitteldeutschen Trockengebiet. Im Verlauf der Allerödzeit bildeten sich hier wie dort lichte Kiefern-Birken-Wälder aus. 4) In der Jüngeren Tundrenzeit fand zunächst nur eine geringe Auflichtung der Wälder statt, und die Kiefer überwog weiterhin. Erst im späteren Verlauf dieser stadialen Phase breitete sich die Birke aus und verdrängte die Kiefer. Der späte Rückgang der Kiefer stellt eine Parallele zu der Entwicklung in Südostmecklenburg und in der Altmark dar. Die Abgrenzung dieser Phasen in der Jüngeren Tundrenzeit ist durch eine 14C-Datierung gesichert. 5) Noch im Atlantikum ähneln die Diagramme aus dem Gartower Talsandgebiet im Osten des Wendlandes in ihren hohen Kiefernanteilen denen der Sandergebiete in Brandenburg. Die Diagramme aus dem Moränengebiet des westlichen Wendlandes schließen dagegen mehr an die der östlichen Lüneburger Heide und des Hamburger Gebietes an. Dieser Unterschied wird auf edaphische Unterschiede zurückgeführt. 6) Seit dem frühen Subboreal glich auch die Vegetation des Gartower Gebietes mehr den buchenarmen Waldgesellschaften auf sauren Sandböden, wie sie im atlantischen Westen vorkommen. Die Kiefern sind fast ganz aus dem Waldbild verschwunden, wobei der rasche Rückgang zu Beginn des Subboreals sicher zu einem wesentlichen Teil vom Menschen beeinflusst worden ist. Die anschließende kiefernarme Zeit dauerte im gesamten Wendland bis zum Beginn der Kieferaufforstungen in der Neuzeit. 7) In allen untersuchten Diagrammen ist etwa seit dem Subboreal eine Besiedlung nachzuweisen. Diese muß im Osten des Wendlandes intensiver gewesen sein als im Westen. Es lassen sich Phasen geringer und intensiver Besiedlung nachweisen. 8) Seit Beginn des Subboreals ist das Waldbild schon so stark vom Menschen beeinflusst, dass die Ausbreitungsgeschichte der Laubwaldarten nicht ohne Berücksichtigung der Siedlungsphasen diskutiert werden kann. Besonders im Westen bestand eine ausgedehnte Lindenphase, die durch eine Siedlungszeit (Bronzezeit) beendet wurde. Beim folgenden Rückgang der Siedlungsintensität breitet sich bevorzugt die Hainbuche aus, die dann bei der nächsten Besiedlungsphase (Eisenzeit) zurückging. Erst danach erfolgte die maximale Rotbuchenausbreitung, die nur im Westteil des Wendlandes bedeutende Ausmaße zeigte, während im Ostteil rot- und hainbuchenreiche Eichenwälder entstanden. 9) Seit Beginn der mittelalterlichen Besiedlung ist dann der Eingriff des Menschen so stark gewesen, dass die edaphisch bedingten Unterschiede zwischen Moränen- und Sandergebieten im Pollenspektrum verwischt wurden. Sowohl die buchenreichen Wälder des westlichen als auch die buchenarmen Wälder des mittleren und des östlichen Teilgebietes müssen zu fast reinen Eichenwäldern geworden sein. 10) Calluna-Heiden sind im östlichen Wendland schon in vorgeschichtlicher Zeit nachzuweisen. Im Mittelalter und in der Neuzeit treten sie im gesamten Wendland auf. Etwa im 18. und 19. Jahrhundert war die Ausdehnung der Heideflächen am größten. Erst danach wurden sie im Zuge der Kiefernaufforstungen bis auf geringe Reste verdrängt. 11) Während in der spätglazialen Vegetation Juniperus auftritt, ist der Wacholder sowohl in vorgeschichtlicher als auch in geschichtlicher Zeit - im Gegensatz zur Lüneburger Heide - wohl niemals ein Bestandteil der anthropogenen Calluna-Heiden gewesen.