CALLIPHORIDAE (DIPTERA) IN MANAUS: IV. BACTERIA ISOLATED FROM BLOWFLIES COLLECTED IN STREET MARKETS

Staphylococcus aureus, Escherichia coli, Proteussp., Providenciasp., Citrobactersp. and Klebsiellasp. were isolated from calliphorid flies collected in eight street markets in the city of Manaus, Amazonas State, Brazil. The presence of £. coliin the samples suggests that faecal contamination is occurring and that these flies are potential vehicles of enteropathogenic bacteria to exposed foods.

Fatores de sucesso e dificuldades das spin-offs empresariais: o caso das agências de mediação de seguros

Dissertação de mestrado em Marketing e Estratégia

Producing LFT composite parts for large consumption markets from thermoplastic powder-coated towpregs

Thermoplastic matrix composites are receiving increasing interest in last years. This is due to several advantageous properties and speed of processing of these materials as compared to their thermoset counterparts. Among thermoplastic composites, Long Fibre Thermoplastics (LFTs) have seen the fastest growth, mainly due to developments in the automotive sector. LFTs combine the (semi-)structural material properties of long (>1 cm) fibres, with the ease and speed of thermoplastic processing. This paper reports a study of a novel low-cost LFT technology and resulting composites. A patented powder-coating machine able to produce continuously pre-impregnated materials directly from fibre rovings and polymer powders was used to process glass-fibre reinforced polypropylene (GF/PP) towpregs. Such pre-impregnated materials were then chopped and used to make LFTs in a patented low-cost piston-blender developed by the Centre of Lightweight Structures, TUD-TNO, the Netherlands. The work allowed studying the most relevant towpreg production parameters and establishing the processing window needed to obtain a good quality GF/PP powder coated material. Finally, the processing window that allows producing LFTs of good quality in the piston-blender and the mechanical properties of final stamped GF/PP composite parts were also determined.

A cost study of common surface finish systems for steel structures

This paper presents part of a study aimed at finding a suitable, yet cost-effective, surface finish for a steel structure subject to the car washing environment and corrosive chemicals. The initial, life cycle and average equivalent annual (AEAC) costs for surface finishing methods were calculated for a steel structure using the LCCC algorithm developed by American Galvanizers Association (AGA). The cost study consisted of 45 common surface finish systems including: hot-dip galvanization (HDG), metallization, acrylic, alkyd and epoxy as well as duplex coatings such as epoxy zinc and inorganic zinc (IOZ). The results show that initial, life cycle and AEAC costs for hot dip galvanization are the lowest among all the other methods, followed by coal tar epoxy painting. The annual average cost of HDG for this structure was estimated about €0.22/m2, while the other cost-effective alternatives were: IOZ, polyurea, epoxy waterborne and IOZ/epoxy duplex coating.

Pultrusion of fibre reinforced thermoplastic pre-impregnated materials

Fibre reinforced thermoplastic pre impregnated materials produced continuously by diverse methods and processing conditions were used to produce composites using pultrusion. The processing windows used to produce these materials and composites profiles were optimized by using the Taguchi / DOE (Design of Experiments) methods. Composites were manufactured by pultrusion and compression moulding and subsequently submitted to mechanical testing and microscopy analysis. The obtained results were compared with the expected theoretical ones predicted from the Rule of Mixtures (ROM) and with those of similar engineering conventional available materials. The results obtained shown that produced composites have adequate properties for applications in common and structural engineering markets.

Color change using HSB color system of dental resin composites immersed in different common Amazon region beverages

The purpose of this study is to evaluate in vitro the color stability of composite resins when exposed to beverages with high coloring contents from the Amazon region. 240 samples from four different composite brands (Natural Look, Z350, 4Seasons and Opallis) of hue A3 were fabricated using an acrylic matrix. The samples were stored in distilled water at 37ºC for 24 hours. The initial color (T0) was registered using a Canon EOS Rebel XTi 10 mp camera, and then the samples were divided into four groups (n=15): G1 (coffee), G2 (açaí juice), G3 (energetic guaraná) and G4 (control - distilled water). The samples were exposed to solutions of DES (6hs) and RE (18hs) and placed in a double boiler under constant agitation, at 37ºC for 30 days. The samples were immersed in the coloring solutions for 15 minutes daily. After 7, 15 and 30 days, new photographic registers were made (T1, T2 and T3). The images were analyzed using Corel PHOTO-PAINT 12 software to identify the colors through the HSB system. The Kruskal-Wallis and t tests (p<0.05) demonstrated significant differences in color (hue, saturation and brightness). The results revealed that none of the tested composites showed color stability when exposed to coloring solutions, and that the Amazon region beverages (açaí juice and energetic guaraná) showed to be less coloring than coffee.

Mycotoxin contamination of Maize and Guinea corn from markets in Plateau State, Nigeria

Maize (Zea mays) and guinea corn (Sorghum bicolor) are major food items in Plateau state, Nigeria. A multistage sampling technique was used to select the markets and store/warehouses used for this study; sample collection employed a simple random sampling method from different sampling points within designated areas. A total of 18 representative samples were collected and analyzed for the following mycotoxins: aflatoxins (Aflatoxin B1 - AFB1, Aflatoxin B2 - AFB2, Aflatoxin G1 - AFG1 and Aflatoxin G2 - AFG2), fumonisins (Fumonisin B1 - FB1 and Fumonisin B2 - FB2 ) and cyclopiazonic acid (CPA). Out of 12 samples analyzed for Aflatoxins, AFB1 was detected in 5, AFB2 in 1, AFG1 in 1 and AFG2 in 6 samples respectively. The highest concentration of AFB1 and AFG2 were found in maize samples from Pankshin market. Only maize samples from Mangu market were contaminated with AFB2 and also harboured the lowest concentration of AFG2. AFG1 contamination occurred in only guinea corn from Shendam market. and FB1 was detected in all 18 samples analyzed. The mycotoxin CPA was not detected in any of the samples. Aflatoxins levels in analyzed samples were regarded as safe based on Nigerian and European Union maximum permissible levels of 4g/kg. With the exception of two samples, FB1 levels in analyzed maize samples were within European Union maximum permissible levels of 1,000 to 3000g/kg. The health and food safety implications of these results for the human and animal population are further discussed.

Common symptoms of Nepalese soft contact lens wearers: A pilot study

Aim: To determine the common symptoms in current soft contact lens (CL) wearers and theirassociation with other factors among Nepalese population.Methods: All the current CL wearers who started to wear soft CL in Nepal Eye Hospital between July 2007 and June 2012 were invited for the participation. Frequency of the ten most common symptoms, divided into never, occasionally, frequently and consistent were recorded. Association between degree of symptoms with other factors, e.g. age, gender, profession, cigarette smoking, ethnicity, level of education and duration and wearing modality of CL wear were analyzed.Results: Out of 129 subjects participated in this study, 67% were female; the mean age of the subjects was 23.9 ± 4.3 years. Ninety seven percent of them had at least one symptom occasionally or frequently or consistently. Discomfort was found in 88.4% of the total subjects.Other common symptoms were foreign body sensation in 73.6%, redness in 65.9%, reduced wearing time in 63.6% and dryness in 62.8%. Symptoms were found occasionally in the majority of subjects. Degree of symptoms was not associated with age, gender, profession, education status, ethnicity of subjects and duration or modality of lens wear (p > 0.05) but was positively associated with passive cigarette smoking (p < 0.001).Conclusion: Almost all of the Nepalese soft CL wearers had some types of symptoms at least occasionally. Discomfort was the most common symptom. Degree of symptoms was associated with the passive smoking but not with other factors like age, sex, profession and duration of lens wear.

Common mental disorders among medical students

OBJECTIVE: Common mental disorders (CMD) have a high impact on interpersonal relationships and quality of life and are potential underlying causes for the development of more serious disorders. Medical students have been indicated as a risk population for the development of CMD. The aim of this study was to determine the frequency of CMD in undergraduate medical students and to identify related factors. METHODS: A cross-sectional study was performed in a sample population of medical students. CMD was identified according to the 20-item Self-Report Questionnaire. RESULTS: Two hundred and twenty-three students completed the questionnaire. The overall prevalence of CMD was 29.6% and its presence was independently associated with sleep disorders, not owning a car, not working and sedentary lifestyle. CONCLUSIONS: These findings indicate a high prevalence of CMD in the sample studied and are important for supporting actions to prevent mental disorders in future doctors and for reflecting on the curricula currently in use in medical schools.

O livro na revista: como revistas semanais brasileiras e portuguesas abordam livros e literatura

Dissertação de mestrado em Comunicação, Arte e Cultura

Association between coronary artery atherosclerosis and the intima-media thickness of the common carotid artery measured on ultrasonography

OBJECTIVE: To assess whether the intima-media thickness of the common carotid artery of patients with coronary artery disease is greater than that of individuals without that disease. METHODS: Case-control prospective study of prevalence assessing the thickness of the intima and media layers of 29 patients with coronary artery disease and 29 individuals without that disease by using ultrasonography of the carotid arteries. Diabetic patients and those with peripheral artery and cerebral vasculopathies were excluded from the study. RESULTS: The mean age was 51±7.5 years. Fifty-five per cent of the patients were males. Acute myocardial infarction was present in 62%; cardiac catheterization in 72%; saphenous bypass in 5%; and coronary angioplasty in 24%. The intima-media thickness of the common carotid artery in case patients and in control patients was, respectively, 0.81±0.25 mm and 0.62±0.18 mm (P=0.001). CONCLUSION: Intima-media thickness of the common carotid artery was significantly greater in patients with coronary artery disease.

A curious herbal :containing five hundred cuts, of the most useful plants, which are now used in the practice of physick engraved on folio copper plates, after drawings taken from the life /by Elizabeth Blackwell. To which is added a short description of ye plants and their common uses in physick.

1737 v. 1 #1010

A curious herbal :containing five hundred cuts, of the most useful plants, which are now used in the practice of physick engraved on folio copper plates, after drawings taken from the life /by Elizabeth Blackwell. To which is added a short description of ye plants and their common uses in physick.

1739 v. 2 #1011

Mercados emergentes en el escenario africano: oportunidades y desafíos para la política exterior argentina. Emergent markets in the African scene: opportunities and challenges for the Argentine foreign policy.

Este trabajo parte de la inquietud de cómo organizar y articular los recursos diplomáticos, económicos, tecnológicos y culturales que cuenta la Argentina en África, para incentivar e incrementar las vinculaciones entre ambas regiones. Teniendo en cuenta los nuevos escenarios emergentes del espacio africano y los lineamientos de política exterior ensayados por nuestro país en los últimos años, nuestro período de análisis se concentrará entre los años 2002 y 2007. Sostenemos que el desarrollo de una estrategia articulada y permanente hacia el África requiere un aprovechamiento más eficaz y eficiente de los recursos humanos, financieros y tecnológicos existentes. De esto modo, la Argentina podría posicionarse como un socio relevante en la agenda de los países africanos, proveyendo productos, tecnología y servicios a mercados complementarios y en expansión. El objetivo general del proyecto es reconocer las transformaciones recientes del diseño exterior argentino hacia los mercados emergentes, en particular hacia África.El abordaje de esta investigación tiene características tanto cualitativas como cuantitativas, al tiempo que pretende alcanzar un nivel de explicación debido al tipo de propuesta. Nuestras unidades de observación son aquellas instituciones y personalidades vinculadas a la elaboración e implementación de la política exterior de Argentina hacia los estados africanos en su conjunto (tanto de África Subsahariana como de África del Norte). En cuanto a las técnicas aplicadas se pueden reconocer diversas fases. En primera instancia se llevará adelante una exploración documental en la Cancillería argentina destinada a cubrir los principales lineamientos respecto al tema. Luego se revisarán documentos producidos por organismos privados y por investigadores científicos. Al mismo tiempo se realizarán entrevistas semiestructuradas a los actores claves que participaron en el proceso de toma de decisiones.Con este trabajo nos proponemos concretar un manual que contenga de forma sistemática las normativas y las prácticas que ejercen cada uno de los actores, tanto públicos como privados, en torno a las vinculaciones entre Argentina y los países de África. Este ordenamiento nos permitirá ofrecer a los responsables de tomas de decisiones un marco articulado, accesible y didáctico para el diseño y la ejecución de futuras políticas hacia la región. Actualmente, los lazos políticos, culturales y de cooperación entre los países de ambas regiones manifiestan un creciente dinamismo, poniendo en juego nuevos terrenos de colaboración como las Cumbres América del Sur-África, las reuniones inter-ministeriales, la firma de acuerdos de comercio entre el Mercosur y algunos estados africanos, entre otros. Sin embargo a pesar de estas señales auspiciosas, los mercados africanos no han sido explorados con la suficiente constancia y profundidad. El desarrollo de este proyecto permitirá, en primer lugar, constituir un corpus de información sobre las normativas y las prácticas en torno los vínculos argentino-africanos. Por otro lado, será una herramienta indispensable para la planificación y concreción de futuras políticas en torno al área. Cabe aclarar que no se limita a organismos del Estado sino también involucraría a actores privados implicados o interesados con los mercados emergentes africanos.