Enxertia em citros por substituição de ápice caulinar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Pegamento e crescimento inicial de enxertos do pessegueiro 'Aurora-1' em clones de umezeiro (Prunus mume Sieb. et Zucc.) e 'Okinawa' [Prunus persica (L.) Batsch] propagados por estacas herbáceas

O presente estudo teve por objetivo avaliar o pegamento e o crescimento inicial de enxertos do pessegueiro 'Aurora-1' em clones de umezeiro (Prunus mume Sieb. et Zucc.) e 'Okinawa' [Prunus persica (L.) Batsch] propagados por estacas herbáceas. Realizaram-se dois experimentos, adotando-se a enxertia de borbulhia por escudo (março) e borbulhia por escudo modificada (julho). Com os resultados obtidos, pode-se concluir que é viável a realização da enxertia do 'Aurora-1' nos Clones 05; 10 e 15 de umezeiro e no 'Okinawa', tanto em março quanto em julho, com as metodologias utilizadas. O 'Okinawa' induz crescimento mais rápido ao enxerto, de forma que o ponto máximo do comprimento é atingido em tempo menor.

Vegetative propagation of bauhinia x blakeana, an ornamental sterile tree

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Rigitano: nova cultivar de umezeiro para porta-enxerto de pessegueiro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Potássio no desenvolvimento inicial da soqueira de cana crua

Na colheita mecanizada sem o uso de fogo ocorre deposição de palhada na superfície do solo, a qual pode ser reciclada e reduzir a adubação potássica para a cana-de-açúcar, em relação à cana queimada, o que pode refletir em menor custo de produção. Objetivou-se avaliar o efeito da aplicação de potássio no desenvolvimento inicial da soqueira de primeiro corte da cana-de-açúcar (variedade SP 89-1115), em sistema de colheita sem despalha a fogo. O experimento foi instalado em uma área de primeira soqueira de cana-de-açúcar, cultivada em Latossolo Vermelho, textura argilosa. Os tratamentos foram constituídos por cinco doses de K2O (0 kg ha-1; 32,5 kg ha-1; 65,0 kg ha-1; 130,0 kg ha-1; e 195,0 kg ha-1), na forma de KCl, aplicado em 2009, dispostos em blocos casualizados e com cinco repetições. As variáveis de crescimento avaliadas foram: número de perfilhos, altura de planta e diâmetro de colmo, aos 120 dias após o brotamento. A aplicação de potássio proporcionou incremento com ajuste linear do teor de potássio no solo, nas camadas 0-0,20 m e 0,20-0,40 m de profundidade, atingindo 0,18 cmol c dm-3 e 0,12 cmol c dm-3, respectivamente, para a maior dose de K. A aplicação de K não afetou o número de perfilhos e diâmetro de colmo, mas influenciou a altura, atingindo maior valor na dose de 195,0 kg ha-1 de K2O.

Contribution of matrix vesicles and alkaline phosphatase to ectopic bone formation

Endochondral calcification involves the participation of matrix vesicles (MVs), but it remains unclear whether calcification ectopically induced by implants of demineralized bone matrix also proceeds via MVs. Ectopic bone formation was induced by implanting rat demineralized diaphyseal bone matrix into the dorsal subcutaneous tissue of Wistar rats and was examined histologically and biochemically. Budding of MVs from chondrocytes was observed to serve as nucleation sites for mineralization during induced ectopic osteogenesis, presenting a diameter with Gaussian distribution with a median of 306 ± 103 nm. While the role of tissue-nonspecific alkaline phosphatase (TNAP) during mineralization involves hydrolysis of inorganic pyrophosphate (PPi), it is unclear how the microenvironment of MV may affect the ability of TNAP to hydrolyze the variety of substrates present at sites of mineralization. We show that the implants contain high levels of TNAP capable of hydrolyzing p-nitrophenylphosphate (pNPP), ATP and PPi. The catalytic properties of glycosyl phosphatidylinositol-anchored, polidocanol-solubilized and phosphatidylinositol-specific phospholipase C-released TNAP were compared using pNPP, ATP and PPi as substrates. While the enzymatic efficiency (k cat/Km) remained comparable between polidocanol-solubilized and membrane-bound TNAP for all three substrates, the k cat/Km for the phosphatidylinositol-specific phospholipase C-solubilized enzyme increased approximately 108-, 56-, and 556-fold for pNPP, ATP and PPi, respectively, compared to the membrane-bound enzyme. Our data are consistent with the involvement of MVs during ectopic calcification and also suggest that the location of TNAP on the membrane of MVs may play a role in determining substrate selectivity in this micro-compartment.

Enxertia em figueira 'Roxo de Valinhos' por borbulhia e garfagem

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Uso de reguladores de crescimento para a superação da dormência e sua influência na brotação, no florescimento e na produção da amoreira-preta

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Propagação vegetativa de aroeira-pimenteira (Schinus terebinthifolius Raddi)

Este trabalho foi realizado com o objetivo de avaliar os melhores métodos e épocas de realização da enxertia, sobre o pegamento de enxertos de aroeira-pimenteira (Schinus terebinthifolius Raddi). Foram conduzidos dois experimentos, instalados na Faculdade de Ciências Agronômicas, da Universidade Estadual Paulista - Câmpus de Botucatu-SP, nos períodos de 16 de dezembro de 2005 a 30 de janeiro 2006 e de 03 de junho a 17 de julho de 2006. O delineamento utilizado foi de blocos casualizados, com cinco tratamentos, três repetições cada e dez plantas por parcela. Os tratamentos foram: garfagem no topo em fenda cheia, inglês simples, inglês complicado; borbulhia em T normal e T invertido. As diferentes épocas do ano alteraram o índice de pegamento, o que restringe o período de coleta de garfos. A maior porcentagem de pegamento ocorreu no mês de dezembro, com a enxertia em fenda cheia (40%). No mês de junho, não houve pegamento significativo, mostrando então que o mês de dezembro é o mês ideal, entre os estudados, para a realização da enxertia em aroeira. As garfagens em geral foram superiores à borbulhia. Houve baixo índice de pegamento, quando não foi nulo, e, além disso, suas borbulhas não apresentaram brotos dentro de 45 dias. A maior porcentagem de plantas com brotos, aos 45 dias, foi pelo método inglês simples, com 92%.

Armazenamento a frio de ramos porta-borbulhas e métodos de enxertia de cultivares de marmeleiro

Visando a aumentar o aproveitamento do material propagativo, ampliar o período de oferta das mudas de marmeleiro e dinamizar o uso da mão-de-obra no viveiro, faz-se necessário o armazenamento dos ramos porta-borbulhas. Sendo assim, o presente trabalho teve por objetivos estudar a viabilidade da manutenção dos ramos porta-borbulhas de diferentes cultivares de marmeleiro, por meio do armazenamento a frio, e diagnosticar o método de enxertia para promover melhor desenvolvimento do enxerto. Ramos dos marmeleiros 'Japonês' (Chaenomeles sinensis), 'Smyrna', 'Portugal', 'Mendoza Inta-37' e 'Provence' (Cydonia oblonga) foram coletados em julho de 2008. Uma parte dos ramos foi utilizada para a realização da enxertia (métodos de borbulhia e garfagem) em mudas de seis meses de idade do porta-enxerto 'Japonês', e a outra parte foi armazenada sob baixa temperatura (estacas envoltas em papel umedecido, embrulhadas em sacos de polietileno colocadas em câmara fria a 4°C), por 30 e 60 dias. Passados 60 dias, foi mensurada a porcentagem de brotação dos enxertos e, ao final de 120 dias da realização das enxertias, foram mensurados o comprimento, o diâmetro e a massa seca média dos enxertos. Concluiu-se que, apesar de as cultivares apresentarem diferença, recomenda-se que os ramos sejam armazenados por até 30 dias, sendo utilizada a enxertia pelo método de garfagem.

Ultrastructural analysis of the low level laser therapy effects on the lesioned anterior tibial muscle in the Gerbil

Low level laser therapy (LLLT) is known for its positive results but studies on the biological and biomodulator characteristics of the effects produced in the skeletal muscle are Still lacking. In this Study the effects of two laser dosages, 5 or 10 J/cm(2), on the lesioned tibial muscle were compared. Gerbils previously lesioned by 100 g load impact were divided into three groups: GI (n = 5) controls, lesion non-irradiated; GII (n = 5), lesion irradiated with 5 J/Cm(2) and GIII (n = 5), lesion irradiated with 10 J/cm(2), and treated for 7 consecutive days with a laser He-Ne (lambda = 633 rim). After intracardiac perfusion, the muscles were dissected and reduced to small fragments, post-fixed in 1% osmium tetroxide, dehydrated in increasing alcohol concentrations, treated with propylene oxide and embedded in Spurr resin at 60 degrees C. Ultrafine Cuts examined on a transmission electron microscope (Jeol 1010) revealed in the control GI group a large number of altered Muscle fibers with degenerating mitochondria, intercellular substance containing degenerating cell fragments and budding blood capillaries with Underdeveloped endothelial cells. However, groups GII and GIII showed muscle fibers with few altered myofibrils, regularly contoured mitochondria, ample intermembrane spaces and dilated mitochondrial crests. The clean intercellular Substance showed numerous collagen fibers and capillaries with multiple abluminal processes, intraluminal protrusions and several pinocytic vesicles in endothelial cells. it was concluded that laser dosages of 5 or 10 J/cm(2) delivered by laser He-Ne (lambda = 633 rim) during 7 consecutive days increase mitochondrial activity in muscular fibers, activate fibroblasts and macrophages and stimulate angiogenesis, thus suggesting effectivity of laser therapy tinder these experimental conditions. (C) 2009 Elsevier Ltd. All rights reserved.

The malate synthase of Paracoccidioides brasiliensis is a linked surface protein that behaves as an anchorless adhesin

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Paracoccidioidomycosis in a Dog: Case Report of Generalized Lymphadenomegaly

Paracoccidioidomycosis (PCM) is a severe systemic mycosis, endemic in Latin America and highly prevalent in Brazil, where it ranks eighth as a mortality cause among infectious and parasitic diseases in humans. The disease in animals has been little explored. It is observed that armadillos can harbor the fungus at high frequencies, although the active disease has not been well documented in this wild mammal. Dogs are susceptible to experimental infection, and the naturally acquired PCM-disease was reported only recently in a dog from Brazil. The present work reports the second case of naturally acquired PCM in a 6-year-old female dog that presented emaciation, lymphadenomegaly, and hepatosplenomegaly. Biochemical and pulmonary radiographic evaluation did not reveal any abnormalities. PCM was diagnosed by clinical findings, culturing, immunohistochemistry, and histopathology of popliteal lymph node. The fungus was recovered from popliteal lymph node, and the molecular analysis showed respective sequencing similarities of 99 and 100% for 803 nucleotides of the Gp43 gene and 592 nucleotides from the ITS-5.8S region of Paracoccidioides brasiliensis. Immunohistochemistry revealed severe lymphadenitis and presented numerous yeasts, which reacted against the gp43 antibody. Histopathology revealed a severe granulomatous lymphadenitis associated with numerous single or multiple budding yeasts. After diagnosis, the dog was successfully treated with itraconazol for 2 years. Veterinarians should be aware of the importance of considering PCM for differential diagnosis, especially in dogs from PCM-endemic areas, whose monophagocytic system involvement is evident.

Influence of microwave disinfection on the dimensional stability of intact and relined acrylic resin denture bases

Statement of problem. Microwave irradiation has been suggested as a method to disinfect denture bases. However, the effect of microwave heating on the dimensional stability of the relined denture bases is unknown.Purpose. The purpose of this study was to evaluate the dimensional stability of intact and relined acrylic resin denture bases after microwave disinfection.Material and methods. A standard brass cast simulating an edentulous maxillary arch was machined and used to fabricate 2- and 4-mm-thick denture bases (n=200), which were processed with heat-polymerized acrylic resin (Lucitone 550). The 2-mm thick-specimens (n=160) were relined with 2 mm of autopolymerizing resin (Tokuso Rebase Fast, Ufi Gel Hard, Kooliner, or New Truliner). Distances between 5 removable pins on the standard brass cast were measured with a Nikon optical comparator, and the area (mm(2)) formed by the distance between 5 pins was calculated and served as baseline. During fabrication, the pins were transferred to the intaglio surface of the specimens. Differences between the baseline area and those subsequently determined for the specimens were used to calculate the percent dimensional changes. The intact and relined denture bases were divided into 4 groups (n=10) and evaluated after: polymerization (control group P); 1 cycle of microwave disinfection (MW); daily microwave disinfection for 7 days (control group MW7); water storage for 7 days (WS7). Microwave irradiation was performed for 6 minutes at 650 W. Data were analyzed using 2-way ANOVA followed by Tukey's test (alpha=.05).Results. Intact specimens and those relined with Kooliner and New Truliner showed increased shrinkage after 1 (P=.05, .018, and .001, respectively) and 7 (P <.001, .003, and <.001, respectively) cycles of microwave disinfection. With the exception of specimens relined with Kooliner, intact specimens showed greater shrinkage than the relined specimens after 7 cycles of microwave disinfection.Conclusions. Microwave disinfection produced increased shrinkage of intact specimens and those relined with New Truliner and Kooliner.

Accuracy of impression and pouring techniques for an implant-supported prosthesis

Purpose: The purpose of this in vitro study was to compare the dimensional accuracy of a stone index and of 3 impression techniques (tapered impression copings, squared impression copings, and squared impression copings splinted with acrylic resin) associated with 3 pouring techniques (conventional, pouring using latex tubes fitted onto analogs, and pouring after joining the analogs with acrylic resin) for implant-supported prostheses. Materials and Methods: A mandibular brass cast with 4 stainless steel implant-abutment analogs, a framework, and 2 aluminum custom trays were fabricated. Polyether impression material was used for all impressions. Ten groups were formed (a control group and 9 test groups formed by combining each pouring technique and impression technique). Five casts were made per group for a total of 50 casts and 200 gap values (1 gap value for each implant-abutment analog). Results: The mean gap value with the index technique was 27.07 mu m. With the conventional pouring technique, the mean gap values were 116.97 mu m for the tapered group, 5784 mu m for the squared group, and 73.17 mu m for the squared splinted group. With pouring using latex tubes, the mean gap values were 65.69 mu m for the tapered group, 38.03 mu m for the squared group, and 82.47 mu m for the squared splinted group. With pouring after joining the analogs with acrylic resin, the mean gap values were 141.12 jum for the tapered group, 74.19 mu m for the squared group, and 104.67 mu m for the squared splinted group. No significant difference was detected among Index, squarellatex techniques, and master cast (P > .05). Conclusions: The most accurate impression technique utilized squared copings. The most accurate pouring technique for making the impression with tapered or squared copings utilized latex tubes. The pouring did not influence the accuracy of the stone casts when using splinted squared impression copings. Either the index technique or the use of squared coping combined with the latex-tube pouring technique are preferred methods for making implant-supported fixed restorations with dimensional accuracy.