Differential susceptibility to performance degradation across categories of facial emotion - a model confirmation

Patients with a number of psychiatric and neuropathological conditions demonstrate problems in recognising facial expressions of emotion. Research indicating that patients with schizophrenia perform more poorly in the recognition of negative valence facial stimuli than positive valence stimuli has been interpreted as evidence of a negative emotion specific deficit. An alternate explanation rests in the psychometric properties of the stimulus materials. This model suggests that the pattern of impairment observed in schizophrenia may reflect initial discrepancies in task difficulty between stimulus categories, which are not apparent in healthy subjects because of ceiling effects. This hypothesis is tested, by examining the performance of healthy subjects in a facial emotion categorisation task with three levels of stimulus resolution. Results confirm the predictions of the model, showing that performance degrades differentially across emotion categories, with the greatest deterioration to negative valence stimuli. In the light of these results, a possible methodology for detecting emotion specific deficits in clinical samples is discussed.

Degradation of hydroxycinnamic acid mixtures in aqueous sucrose solutions by the Fenton process

The degradation efficiencies and behaviors of caffeic acid (CaA), p-coumaric acid (pCoA) and ferulic acid (FeA) in aqueous sucrose solutions containing the mixture of these hydroxycinnamic acids (HCAs) mixtures were studied by the Fenton oxidation process. Central composite design and multi-response surface methodology were used to evaluate and optimize the interactive effects of process parameters. Four quadratic polynomial models were developed for the degradation of each individual acid in the mixture and the total HCAs degraded. Sucrose was the most influential parameter that significantly affected the total amount of HCA degraded. Under the conditions studied there was < 0.01% loss of sucrose in all reactions. The optimal values of the process parameters for a 200 mg/L HCA mixture in water (pH 4.73, 25.15 °C) and sucrose solution (13 mass%, pH 5.39, 35.98 °C) were 77% and 57% respectively. Regression analysis showed goodness of fit between the experimental results and the predicted values. The degradation behavior of CaA differed from those of pCoA and FeA, where further CaA degradation is observed at increasing sucrose and decreasing solution pH. The differences (established using UV/Vis and ATR-FTIR spectroscopy) were because, unlike the other acids, CaA formed a complex with Fe(III) or with Fe(III) hydrogen-bonded to sucrose, and coprecipitated with lepidocrocite, an iron oxyhydroxide.

Rethinking board composition: Balancing competence and compatibility in director selection

Board composition is critical to board effectiveness. Shaping an effective board begins with the selection of directors. While much attention has been paid to the skills and qualifications directors require, there has been less focus on the necessity for board members to interact and work well together. This exploratory study offers insights into what qualities directors look for when selecting new members and the approach adopted to identify and select them. The findings of 10 in-depth interviews with Australian directors suggest new members are selected both on competencies and compatibility. Yet not all selection approaches adequately assess candidates for these two criteria. As a result many appointments fail to realise the selection criteria reducing capacity to reach its full potential.

Elemental composition of ambient fine particles in urban schools : sources of children’s exposure

Currently, there is a limited understanding of the sources of ambient fine particles that contribute to the exposure of children at urban schools. Since the size and chemical composition of airborne particle are key parameters for determining the source as well as toxicity, PM1 particles (mass concentration of particles with an aerodynamic diameter less than 1 µm) were collected at 24 urban schools in Brisbane, Australia and their elemental composition determined. Based on the elemental composition four main sources were identified; secondary sulphates, biomass burning, vehicle and industrial emissions. The largest contributing source was industrial emissions and this was considered as the main source of trace elements in the PM1 that children were exposed to at school. PM1 concentrations at the schools were compared to the elemental composition of the PM2.5 particles (mass concentration of particles with an aerodynamic diameter less than 2.5 µm) from a previous study conducted at a suburban and roadside site in Brisbane. This comparison revealed that the more toxic heavy metals (V, Cr, Ni, Cu, Zn and Pb), mostly from vehicle and industrial emissions, were predominantly in the PM1 fraction. Thus, the results from this study points to PM1 as a potentially better particle size fraction for investigating the health effects of airborne particles.

Dynamic agent composition for large-scale agent-based models

PURPOSE: This paper describes dynamic agent composition, used to support the development of flexible and extensible large-scale agent-based models (ABMs). This approach was motivated by a need to extend and modify, with ease, an ABM with an underlying networked structure as more information becomes available. Flexibility was also sought after so that simulations are set up with ease, without the need to program. METHODS: The dynamic agent composition approach consists in having agents, whose implementation has been broken into atomic units, come together at runtime to form the complex system representation on which simulations are run. These components capture information at a fine level of detail and provide a vast range of combinations and options for a modeller to create ABMs. RESULTS: A description of the dynamic agent composition is given in this paper, as well as details about its implementation within MODAM (MODular Agent-based Model), a software framework which is applied to the planning of the electricity distribution network. Illustrations of the implementation of the dynamic agent composition are consequently given for that domain throughout the paper. It is however expected that this approach will be beneficial to other problem domains, especially those with a networked structure, such as water or gas networks. CONCLUSIONS: Dynamic agent composition has many advantages over the way agent-based models are traditionally built for the users, the developers, as well as for agent-based modelling as a scientific approach. Developers can extend the model without the need to access or modify previously written code; they can develop groups of entities independently and add them to those already defined to extend the model. Users can mix-and-match already implemented components to form large-scales ABMs, allowing them to quickly setup simulations and easily compare scenarios without the need to program. The dynamic agent composition provides a natural simulation space over which ABMs of networked structures are represented, facilitating their implementation; and verification and validation of models is facilitated by quickly setting up alternative simulations.

Differences in composition of symptom clusters between older and younger oncology patients

Context Older oncology patients have unique needs associated with the many physical, psychological,and social changes associated with the aging process. The mechanisms underpinning and the impact of these changes are not well understood. Identification of clusters of symptoms is one approach that has been used to elicit hypotheses about the biological and/or psychological basis for variations in symptom experiences. Objectives The purposes of this study were to identify and compare symptom clusters in younger (<60 years) and older ($60 years) patients undergoing cancer treatment. Methods. Symptom data from one Australian study and two U.S. studies were combined to conduct this analysis. A total of 593 patients receiving active treatment were dichotomized into younger (<60 years) and older ($60 years) groups. Separate exploratory factor analyses (EFAs) were undertaken within each group to identify symptom clusters from occurrence ratings of the 32 symptoms assessed by the Memorial Symptom Assessment Scale. Results In both groups, a seven-factor solution was selected. Four partially concordant symptom clusters emerged in both groups (i.e., mood/cognitive, malaise, body image, and genitourinary). In the older patients, the three unique clusters reflected physiological changes associated with aging, whereas in the younger group the three unique clusters reflected treatment-related effects. Conclusion The symptom clusters identified in older patients typically included a larger and more diverse range of physical and psychological symptoms. Differences also may be reflective of variations in treatment approaches between age groups. Findings highlight the need for better understanding of variation in treatment and symptom burden between younger and older adults with cancer.

Comparison of Body Composition Assessment Methods in Breast Cancer Survivors

Purpose/Objectives: To examine and compare the reliability of four body composition methods commonly used in assessing breast cancer survivors. Design: Cross-sectional. Setting: A rehabilitation facility at a university-based comprehensive cancer center in the southeastern United States. Sample: 14 breast cancer survivors aged 40-71 years. Methods: Body fat (BF) percentage was estimated via bioelectric impedance analysis (BIA), air displacement plethysmography (ADP), and skinfold thickness (SKF) using both three- and seven-site algorithms, where reliability of the methods was evaluated by conducting two tests for each method (test 1 and test 2), one immediately after the other. An analysis of variance was used to compare the results of BF percentage among the four methods. Intraclass correlation coefficient (ICC) was used to test the reliability of each method. Main Research Variable: BF percentage. Findings: Significant differences in BF percentage were observed between BIA and all other methods (three-site SKF, p < 0.001; seven-site SKF, p < 0.001; ADP, p = 0.002). No significant differences (p > 0.05) in BF percentage between three-site SKF, seven-site SKF, and ADP were observed. ICCs between test 1 and test 2 for each method were BIA = 1, ADP = 0.98, three-site SKF = 0.99, and seven-site SKF = 0.94. Conclusions: ADP and both SKF methods produce similar estimates of BF percentage in all participants, whereas BIA overestimated BF percentage relative to the other measures. Caution is recommended when using BIA as the body composition method for breast cancer survivors who have completed treatment but are still undergoing adjuvant hormonal therapy. Implications for Nursing: Measurements of body composition can be implemented very easily as part of usual care and should serve as an objective outcome measure for interventions designed to promote healthy behaviors among breast cancer survivors. - See more at: https://onf.ons.org/onf/38/4/comparison-body-composition-assessment-methods-breast-cancer-survivors#sthash.5djfTS1Q.dpuf

Heat-producing element enrichment in granitic rocks, the role of crustal composition and evolution

This study greatly enhanced our knowledge of the potential for geothermal energy development in Queensland as a viable clean energy source in the coming decades. Key outcomes of the project were understanding the first-order controls on the concentration of the heat-producing elements: uranium, thorium and potassium in granitic rocks, and constraining where rocks with the greatest heat-producing potential lie at depth in Queensland. Importantly, new temperature and heat flow maps for southwest Queensland were developed that will greatly assist future exploration efforts.

Influence of habitual physical activity on gastric emptying in healthy males and relationships with body composition and energy expenditure

Although a number of studies have examined the role of gastric emptying (GE) in obesity, the influences of habitual physical activity level, body composition and energy expenditure (EE) on GE have received very little consideration. In this study, we have compared GE in active and inactive males, and we have characterised relationships with body composition (fat and fat free mass) and EE. Forty-four males (Active: n=22, Inactive: n=22; range BMI 21-36kg/m2; range percent fat mass 9-42%) were studied, with GE of a standardised (1676 kJ) pancake meal being assessed by 13C-octanoic acid breath test, body composition by air displacement plethysmography, resting metabolic rate (RMR) by indirect calorimetry and activity EE (AEE) by accelerometry. Results showed that GE was faster in active compared to inactive males (mean ±SD half time (t1/2): Active: 157±18 and Inactive: 179±21 min, p<0.001). When data from both groups were pooled, GE t1/2 was associated with percent fat mass (r=0.39, p<0.01) and AEE (r =-0.46, p<0.01). After controlling for habitual physical activity status, the association between AEE and GE remained, but not that for percent fat mass and GE. BMI and RMR were not associated with GE. In summary, faster GE is considered to be a marker of a habitually active lifestyle in males, and is associated with a higher AEE and lower percent fat mass. The possibility that GE contributes to a gross physiological regulation (or dysregulation) of food intake with physical activity level deserves further investigation.

Service composition and binding

Service composition enables the creation of services previously unavailable through the aggregation of existing services. The result is called a service composition. Exposing a service composition as a service, the result is called a composed service. It can be distinguished from atomic services. Service composition approaches can be differentiated along two axes: point in time of composition and degree of automation. With design-time and run-time we can identify two different points in time for doing a composition. Additionally we can distinguish between three different degrees of automation: manual, assisted, and automated service composition. © 2008 Springer Berlin Heidelberg.

Effects of biodiesel chemical composition on the chemical and physical properties of the primary and secondary diesel particulate matter

This thesis improves our insight towards the effects of using biodiesels on the particulate matter emission of diesel engines and contributes to our understanding of their potential adverse health effects. The novelty of this project is the use of biodiesel fuel with controlled chemical composition that enables us to relate changes of physiochemical properties of particles to specific properties of the biodiesel. For the first time, the possibility of a correlation of the volatility and the Reactive Oxygen Species concentration of the particles is investigated versus the saturation, oxygen content and carbon chain length of the fuel.

Assessment of body composition of Sri Lankan Australian children using ethnic specific equations

Since ethnic differences exist in body composition, assessment methods need to be validated prior to use in different populations. This study attempts to validate the use of Sri Lankan based body composition assessment tools on a group of 5 - 15 year old Australian children of Sri Lankan origin. The study was conducted at the Body Composition Laboratory of the Children’s Nutrition Research Centre at the Royal Children’s Hospital, Brisbane, Australia. Height (Ht), weight (Wt), segmental length (Lsegment name) and skinfold thickness (SFT) were measured. The whole body and segmental bio impedance analysis (BIA) were also measured. The body composition determined by the deuterium dilution technique (criterion method) was compared with the assessments done using prediction equations developed on Sri Lankan children. 27 boys and 15 girls were studied. All predictions of body composition parameters, except percentage fat mass (FM) assessed by the SFT-FM equation in girls gave statistically significant correlations with the criterion method. They had a low mean bias and most were not influenced by the measured parameter. Although living in a different socioeconomic state, the equations developed on children of the same ethnic background gives a better predictive value of body composition. This highlights the ethnic influence on body composition.

Development of height-weight based equation for assessment of body composition in Sri Lankan children

Objective To develop a height and weight based equation to estimate total body water (TBW) in Sri Lankan children. Methods Cross sectional descriptive study done involving 5–15 year old healthy children. Height and weight were measured. TBW was assessed using isotope dilution method (D2O) and fat free mass (FFM) calculated. Multiple regression analysis was used to develop prediction equation and validated using PRESS statistical technique. Height, weight and sex code (male=1; female=0) were used as prediction variables. Results This study provides height and weight equation for the prediction of TBW in Sri Lankan children. To the best of our knowledge there are no published height weight prediction equations validated on South Asian populations. Conclusion Results of this study need to be affirmed by more studies on other closely related populations by using multicomponent body composition.

Segmental bioelectrical impedance in the assessment of body composition of Sri Lankan children

Abstract: Over the years bioelectrical impedance assay (BIA) has gained popularity in the assessment of body composition. However, equations for the prediction of whole body composition use whole body BIA. This study attempts to evaluate the usefulness of segmental BIA in the assessment of whole body composition. A cross sectional descriptive study was conducted at the Professorial Paediatric Unit of Lady Ridgeway Hospital, Colombo, involving 259 (M/F:144/115) 5 to 15 year old healthy children. The height, weight, total and segmental BIA were measured and impedance indices and specific resistivity for the whole body and segments were calculated. Segmental BIA indices showed a significant association with whole body composition measures assessed by total body water (TBW) using the isotope dilution method (D2O). Impedance index was better related to TBW and fat free mass (FFM), while specific resistivity was better related to the fat mass of the body. Regression equations with different combinations of variables showed high predictability of whole body composition. Results of this study showed that segmental BIA can be used as an alternative approach to predict the whole body composition in Sri Lankan children.

Pro-angiogenic and anti-angiogenic factors in the degradation of osteoarthritic cartilage

This project has determined angiogenic and anti-angiogenic factors in osteoarthritis cartilage. The work has expanded our knowledge and understanding of the importance of anti-angiogenic factors in maintaining cartilage homeostasis. This study also tested the concept of topical application of anti-angiogenic treatment strategy for osteoarthritis.