High-efficient production of boron nitride nanosheets via an optimized ball milling process for lubrication in oil

Although tailored wet ball milling can be an efficient method to produce a large quantity of two-dimensional nanomaterials, such as boron nitride (BN) nanosheets, milling parameters including milling speed, ball-to-powder ratio, milling ball size and milling agent, are important for optimization of exfoliation efficiency and production yield. In this report, we systematically investigate the effects of different milling parameters on the production of BN nanosheets with benzyl benzoate being used as the milling agent. It is found that small balls of 0.1-0.2 mm in diameter are much more effective in exfoliating BN particles to BN nanosheets. Under the optimum condition, the production yield can be as high as 13.8% and the BN nanosheets are 0.5-1.5 μm in diameter and a few nanometers thick and of relative high crystallinity and chemical purity. The lubrication properties of the BN nanosheets in base oil have also been studied. The tribological tests show that the BN nanosheets can greatly reduce the friction coefficient and wear scar diameter of the base oil.

Boron nitride nanosheets as improved and reusable substrates for gold nanoparticles enabled surface enhanced Raman spectroscopy.

Atomically thin boron nitride (BN) nanosheets have been found to be excellent substrates for noble metal particles enabled surface enhanced Raman spectroscopy (SERS), thanks to their good adsorption of aromatic molecules, high thermal stability and weak Raman scattering. Faceted gold (Au) nanoparticles have been synthesized on BN nanosheets using a simple but controllable and reproducible sputtering and annealing method. The size and density of the Au particles can be controlled by sputtering time, current and annealing temperature etc. Under the same sputtering and annealing conditions, the Au particles on BN of different thicknesses show various sizes because the surface diffusion coefficients of Au depend on the thickness of BN. Intriguingly, decorated with similar morphology and distribution of Au particles, BN nanosheets exhibit better Raman enhancements than silicon substrates as well as bulk BN crystals. Additionally, BN nanosheets show no noticeable SERS signal and hence cause no interference to the Raman signal of the analyte. The Au/BN substrates can be reused by heating in air to remove the adsorbed analyte without loss of SERS enhancement.

Highly crumpled boron nitride nanosheets as adsorbents: scalable solvent-less production

Boron nitride nanosheets (BNNSs), so-called “white graphene”, have recently received increasing attention, both theoretically and experimentally. Although many synthetic procedures have been proposed for the synthesis of BNNSs, finding a simple, solvent-less, catalyst-free, and large-scale production route is still a challenge. Here, a facile, solvent-less, low cost, and high yield process is developed, in which mechanical solid-state exfoliation allows scalable production of crumple BNNSs from commercial BN powders with a high surface area. Importantly, these BNNSs show unprecedentedly high adsorption of proteins described by various adsorption isotherms and kinetics models. In addition, the saturated BNNSs exhibit excellent recyclability, and maintain a high sorption capacity even after five cycles through simply regeneration process of heating in air. This easy recyclability route further demonstrates the great potential of BNNSs for water cleaning application.

Multifunctional polymer/porous boron nitride nanosheet membranes for superior trapping emulsified oils and organic molecules

Effective oil/water separation and removal of organic molecules from water are of worldwide importance for water source protection. Multifunctional sorbent materials with excellent sorption capacity, stability, and recyclability properties need to be developed. Here, flexible and multifunctional polymer/porous boron nitride nanosheets (BNNSs) membranes with high water permeability, exhibiting high effectiveness and stability in the purification of simulated wastewater tainted with either oil/water emulsion or organic molecules, are reported. Remarkably, the flexible nature of these porous membranes enables simplicity of operation for water remediation processing and ease of post-processing collection. The composite membrane also displays a remarkably high permeability of 8 × 10⁴ L μm m^-2 h^-1 bar^-1, roughly three orders of magnitude higher than pure polymer, and excellent filter efficiencies for the pharmaceuticals ciprofloxacin, chlortetracycline, and carbamazepine (up to 14.2 L g^-1 of BNNSs in the composite membrane for a concentration of 10 mg L^-1 ciprofloxacin) and the dye methylene blue (up to 9.3 L g^-1 of BNNSs in the composite membrane at a concentration of 30 mg L^-1). Exhausted membranes can be readily rejuvenated by simple washing with retention of their high-performance characteristics. The results demonstrate the potential efficacy and practicality of these membranes for water cleaning.

Boron nitride colloidal solutions, ultralight aerogels and freestanding membranes through one-step exfoliation and functionalization

Manufacturing of aerogels and membranes from hexagonal boron nitride (h-BN) is much more difficult than from graphene or graphene oxides because of the poor dispersibility of h-BN in water, which limits its exfoliation and preparation of colloidal solutions. Here, a simple, one-step mechano-chemical process to exfoliate and functionalize h-BN into highly water-dispersible, few-layer h-BN containing amino groups is presented. The colloidal solutions of few-layer h-BN can have unprecedentedly high concentrations, up to 30 mg ml(-1), and are stable for up to several months. They can be used to produce ultralight aerogels with a density of 1.4 mg cm(-3), which is ∼1,500 times less than bulk h-BN, and freestanding membranes simply by cryodrying and filtration, respectively. The material shows strong blue light emission under ultraviolet excitation, in both dispersed and dry state.

Field emission properties from boron nitride nanotube field emitters

Boron nitride nanotubes (BNNTs) have been studied as a field emission material due to their unique and excellent properties such as high oxidation resistance and negative electron affinity. However, field emission properties of BNNT field emitters were rarely reported until now because it is difficult to synthesize high purity BNNTs and fabricate stable BNNT field emitters. Here, we report high field emission properties from BNNT field emitters fabricated on a tungsten rod.

Coffee leaf and stem anatomy under boron deficiency

A deficiência de B é muito comum nos cafezais brasileiros, mas as respostas do cafeeiro ao B têm sido erráticas, dependendo do ano, do modo e época de aplicação e, ainda, da fonte de B empregada. Um melhor entendimento dos efeitos do B na fisiologia e anatomia do cafeeiro é importante para o desenvolvimento de um programa racional de adubação boratada, uma vez que a anatomia da planta pode influenciar a translocação do nutriente. Neste experimento, plantas de dois cultivares foram cultivadas em soluções nutritivas com 0,0 (deficiente), 5,0 (adequado) e 25,0 µM (alto) de B. Quando os primeiros sintomas de deficiência apareceram, as folhas foram cortadas e tiveram suas paredes celulares isoladas e analisadas quanto aos teores de B e Ca. Cortes foram feitos em folhas novas e no ápice de ponteiros e fotografados em microscópio eletrônico de varredura. A resposta dos dois cultivares ao B foi semelhante, não tendo sido observados sintomas de toxidez. O teor de B nas paredes celulares foi aumentado com o incremento da concentração desse elemento na solução, enquanto o teor de Ca não foi afetado. A relação Ca/B decresceu com o aumento da concentração de B na solução. Com deficiência de B, os tecidos vasculares foram desorganizados e as paredes do xilema ficaram mais finas. Folhas de café com deficiência deste nutriente apresentaram menos estômatos, os quais se encontravam.

Compared boron uptake and translocation in cotton cultivars

O boro (B) tem baixa mobilidade no floema das plantas e é reconhecidamente o micronutriente cuja deficiência é mais comum no algodoeiro. Neste trabalho foi estudada a absorção e mobilidade do B em cultivares de algodão. O experimento foi conduzido em casa de vegetação, e as plantas foram cultivadas em solução nutritiva. Os tratamentos foram constituídos de três cultivares de algodão (FMT 701, DP 604BG e FMX 993) e cinco doses de B (0,0; 2,5; 5,0; 10,0 e 20,0 µmol L-1). As avaliações foram feitas em quatro semanas consecutivas, a partir da primeira semana após emissão do primeiro botão floral. A época de aparecimento e a intensidade de sintomas de deficiência de boro entre cultivares de algodão são diferentes. A cultivar DP604BG é inicialmente menos exigente em B, porém há necessidade de maior disponibilidade desse micronutriente no meio nutritivo para evitar o aparecimento de deficiência. O crescimento do algodoeiro é prejudicado pela carência de B, independentemente das diferenças no aparecimento de sintomas, não havendo diferença entre as cultivares.

Boron adsorption in lowland soils from Parana State, Brazil

Boron adsorption by soil is the main phenomenon that affects its availability to plants. This, the present study investigated the effect of liming on B adsorption by lowland soils of Parana State, and to correlate these values with the physical and chemical properties of the soils. Surface samples of three lowland soils [Gleissolo Haplico (GX), Plintossolo Haplico (FX) and Cambissolo Haplico (CX)], with different origin material and physicochemical properties were used. Samples with or without liming application were incubated during 60 days. Boron adsorption was accomplished by shaking 4.0g soil samples, for 24 h, with 20 mL of 0.01 mol L-1 CaCl2 solution containing different concentrations of B (0, 1, 2, 4, 8 and 16 mg L-1). Sorption was fitted to non-linear form of the Langmuir adsorption isotherm. The adsorption isotherms indicated that the B adsorption increased with its increasing concentration in the equilibrium solution. Maximum adsorption capacity of B ranged from 3.0 to 13.9 mg kg(-1) (without liming) and 14.7 to 35.7 mg kg(-1) (with liming). Liming increased the amount of adsorbed B in Gleissolo Haplico and Plintossolo Haplico soils, although the bonding energy has decreased. The amount of adsorbed B by Cambissolo Haplico soil was not affected by liming application. The most important soil properties affecting the B adsorption in lowland soils were pH, clay content, exchangeable aluminum and iron oxide contents.

Boron rates for triticale and wheat crops

No Brasil não existem registros de respostas de adubação com boro para a cultura do triticale, sendo a ação deste nutriente uma incógnita, tanto em relação a deficiência quanto a toxidez, causas que levam a redução de produtividade. O objetivo deste trabalho foi avaliar a resposta do triticale a diferentes níveis de boro em comparação com o trigo (Triticum aestivum). Utilizou-se um Latossolo Vermelho distrófico com teor inicial de boro de 0,08 mg dm-3. O delineamento foi um fatorial 4 ´ 4, distribuído em blocos casualizados, com quatro repetições, quatro níveis de boro: 0; 0,62; 1,24 e 1,86 mg dm-3 de B e três cultivares de triticale, IAC 3, BR 4 e BR 53, mais um cultivar de trigo, IAPAR 38, para comparação. Cada cultivar respondeu de forma diferente com relação às variáveis estudadas em função da aplicação de diferentes níveis de boro. O trigo (IAPAR 38) apresenta maior eficiência na absorção de boro. A cultivar de triticale mais responsiva quanto à absorção foi a IAC 3, que apresentou característica semelhante ao trigo, seguida da cultivar BR 4, demonstrando serem cultivares tolerantes a maiores níveis de boro no solo. Para a BR 53, não ocorreu efeito para absorção, com a cultivar apresentando sensibilidade à toxidez de boro. A eficiência de absorção é diferenciada para cada genótipo possibilitando a escolha e utilização de plantas que possuam maior adaptação ao meio.

Fenologics characteristics of the Siciliano lemon tree on two rootstocks influenced by liming and boron addition

O presente estudo foi desenvolvido na UNESP/Botucatu, São Paulo, Brasil, num solo identificado como Oxisol, onde foram plantadas mudas de limoeiro Siciliano (C. limon) enxertadas em laranjeira Azeda (C. aurantium) e em limoeiro Cravo (C. limonia). O experimento consistiu em três níveis de saturação por bases (50%, 70% e 90%) e três doses de boro (0,5; 1,5 e 4,5 mg dm-3) no plantio em esquema fatorial de 3x3x2, com quatro repetições. Houve diferentes comportamentos entre os porta-enxertos no que se refere à composição mineral de folhas de limoeiro Siciliano , bem como, no desenvolvimento do sistema radicular, sendo maior na laranjeira azeda em relação ao limoeiro cravo. Não houve nenhum efeito na interação de níveis de saturação por bases e doses de boro para nenhum dos parâmetros avaliados.

Boron transport in Eucalyptus. 2. Identification in silico of a putative boron transporter for xylem loading in eucalypt

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Austenite decomposition of C-Mn steel containing boron by continuous cooling

The austenite decomposition in C-Mn steel containing boron was studied by continuous cooling from 1100 and 845 degreesC using the Jominy test. The results indicate that the different cooling speeds and the presence of boron refine and change the percentage of ferrite microstructure, martensite, and fine pearlite. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Electrochemical reduction of disperse orange 1 textile dye at a boron-doped diamond electrode

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)