Infrared and infrared emission spectroscopy of gallium oxide α-GaO(OH) nanostructures

Infrared spectroscopy has been used to study nano to micro sized gallium oxyhydroxide α-GaO(OH), prepared using a low temperature hydrothermal route. Rod-like α-GaO(OH) crystals with average length of ~2.5 μm and width of 1.5 μm were prepared when the initial molar ratio of Ga to OH was 1:3. β-Ga2O3 nano and micro-rods were prepared through the calcination of α-GaO(OH) The initial morphology of α-GaO(OH) is retained in the β-Ga2O3 nanorods. The combination of infrared and infrared emission spectroscopy complimented with dynamic thermal analysis were used to characterise the α-GaO(OH) nanotubes and the formation of β-Ga2O3 nanorods. Bands at around 2903 and 2836 cm-1 are assigned to the -OH stretching vibration of α-GaO(OH) nanorods. Infrared bands at around 952 and 1026 cm-1 are assigned to the Ga-OH deformation modes of α-GaO(OH). A significant number of bands are observed in the 620 to 725 cm-1 region and are assigned to GaO stretching vibrations.

Year 6 students' idiosyncratic notions of unitising, reunitising and regrouping decimal number places

Having flexible notions of the unit (e.g., 26 ones can be thought of as 2.6 tens, 1 ten 16 ones, 260 tenths, etc.) should be a major focus of elementary mathematics education. However, often these powerful notions are relegated to computations where the major emphasis is on "getting the right answer" thus procedural knowledge rather than conceptual knowledge becomes the primary focus. This paper reports on 22 high-performing students' reunitising processes ascertained from individual interviews on tasks requiring unitising, reunitising and regrouping; errors were categorised to depict particular thinking strategies. The results show that, even for high-performing students, regrouping is a cognitively complex task. This paper analyses this complexity and draws inferences for teaching.

Development of a particle number and particle mass vehicle emissions inventory for an urban fleet

Motor vehicles are major emitters of gaseous and particulate pollution in urban areas, and exposure to particulate pollution can have serious health effects, ranging from respiratory and cardiovascular disease to mortality. Motor vehicle tailpipe particle emissions span a broad size range from 0.003-10µm, and are measured as different subsets of particle mass concentrations or particle number count. However, no comprehensive inventories currently exist in the international published literature covering this wide size range. This paper presents the first published comprehensive inventory of motor vehicle tailpipe particle emissions covering the full size range of particles emitted. The inventory was developed for urban South-East Queensland by combining two techniques from distinctly different disciplines, from aerosol science and transport modelling. A comprehensive set of particle emission factors were combined with traffic modelling, and tailpipe particle emissions were quantified for particle number (ultrafine particles), PM1, PM2.5 and PM10 for light and heavy duty vehicles and buses. A second aim of the paper involved using the data derived in this inventory for scenario analyses, to model the particle emission implications of different proportions of passengers travelling in light duty vehicles and buses in the study region, and to derive an estimate of fleet particle emissions in 2026. It was found that heavy duty vehicles (HDVs) in the study region were major emitters of particulate matter pollution, and although they contributed only around 6% of total regional vehicle kilometres travelled, they contributed more than 50% of the region’s particle number (ultrafine particles) and PM1 emissions. With the freight task in the region predicted to double over the next 20 years, this suggests that HDVs need to be a major focus of mitigation efforts. HDVs dominated particle number (ultrafine particles) and PM1 emissions; and LDV PM2.5 and PM10 emissions. Buses contributed approximately 1-2% of regional particle emissions.

Increase in particle number emissions from motor vehicles due to interruption of steady traffic flow

We assess the increase in particle number emissions from motor vehicles driving at steady speed when forced to stop and accelerate from rest. Considering the example of a signalized pedestrian crossing on a two-way single-lane urban road, we use a complex line source method to calculate the total emissions produced by a specific number and mix of light petrol cars and diesel passenger buses and show that the total emissions during a red light is significantly higher than during the time when the light remains green. Replacing two cars with one bus increased the emissions by over an order of magnitude. Considering these large differences, we conclude that the importance attached to particle number emissions in traffic management policies be reassessed in the future.

Body-shadowing effects in indoor MIMO-OFDM channel capacity

We investigate Multiple-Input and Multiple-Output Orthogonal Frequency Division Multiplexing (MIMO-OFDM) systems behavior in indoor populated environments that have line-of-site (LoS) between transmitter and receiver arrays. The in-house built MIMO-OFDM packet transmission demonstrator, equipped with four transmitters and four receivers, has been utilized to perform channel measurements at 5.2 GHz. Measurements have been performed using 0 to 3 pedestrians with different antenna arrays (2 £ 2, 3 £ 3 and 4 £ 4). The maximum average capacity for the 2x2 deterministic Fixed SNR scenario is 8.5 dB compared to the 4x4 deterministic scenario that has a maximum average capacity of 16.2 dB, thus an increment of 8 dB in average capacity has been measured when the array size increases from 2x2 to 4x4. In addition a regular variation has been observed for Random scenarios compared to the deterministic scenarios. An incremental trend in average channel capacity for both deterministic and random pedestrian movements has been observed with increasing number of pedestrian and antennas. In deterministic scenarios, the variations in average channel capacity are more noticeable than for the random scenarios due to a more prolonged and controlled body-shadowing effect. Moreover due to the frequent Los blocking and fixed transmission power a slight decrement have been observed in the spread between the maximum and minimum capacity with random fixed Tx power scenario.

New parameters for daytime wandering

This study aimed to describe wandering using new parameters and to evaluate parameters as a function of cognitive impairment and mobility. Forty-four wanderers in long-term care settings were videotaped 12 times. Rate and duration of wandering episodes were plotted and used to derive parameters from values above and below case medians, proportion of hours wandering, and time of day. Participants wandered during 47% of observations; on average, the hourly rate was 4.3 episodes, the peak hourly rate was 18 episodes, and the peak hourly duration was 19.9 minutes. Mini-Mental State Examination (MMSE) scores was negatively correlated with overall duration and number of observations during which duration exceeded 15 minutes per hour, was positively correlated with number of observations without wandering, and was not significantly correlated with rate-related parameters. Mobility correlated positively with rate and duration parameters. Interaction of MMSE score and mobility was the strongest predictor of wandering duration. Parameters derived from repeated measures provide a new view of daytime wandering and insight into relationships between MMSE score and mobility status with specific parameters of wandering.

Burden of care and general health in families of patients with schizophrenia

Background: De-institutionalization of psychiatric patients has led to a greater emphasis on family management in the community, and family members are often overwhelmed by the demands that caring for a patient with schizophrenia involves. Most studies of family burden in schizophrenia have taken place in developed countries. The current study examined family burden and its correlates in a regional area of a medium income country in South America. Method: Sixty-five relatives of patients with schizophrenia who were attending a public mental health out-patient service in the province of Arica, Chile, were assessed on Spanish versions of the Zarit Caregiver Burden Scale and SF-36 Health Survey (SF-36). Results: Average levels of burden were very high, particularly for mothers, carers with less education, carers of younger patients and carers of patients with more hospitalisations in the previous 3 years. Kinship and number of recent hospitalisations retained unique predictive variance in a multiple regression. Burden was the strongest predictor of SF-36 subscales, and the prediction from burden remained significant after entry of other potential predictors. Conclusions: In common with families in developed countries, family members of schizophrenia patients in regional Chile reported high levels of burden and related functional and health impact. The study highlighted the support needs of carers in contexts with high rates of poverty and limited health and community resources.

The Influence of Farm Management on NSW Rural Property Income and Total Average Annual Returns

The importance of agriculture in many countries has tended to reduce as their economies move from a resource base to a manufacturing industry base. Although the level of agricultural production in first world countries has increased over the past two decades, this increase has generally been at a less significant rate compared to other sectors of the economies. Despite this increase in secondary and high technology industries, developed countries have continued to encourage and support their agricultural industries. This support has been through both tariffs and price support. Following pressure from developing economies, particularly through the World Trade Organisation (WTO), GATT Uruguay round and the Cairns Group developed countries are now in various stages of winding back or de-coupling agricultural support within their economies. A major concern of farmers in protected agricultural markets is the impact of a free market trade in agricultural commodities on farm incomes, profitability and land values. This paper will analyse both the capital and income performance of the NSW rural land market over the period 1990-1999. This analysis will be based on several rural land use classifications and will compare the total return from rural properties based on the farm income generated by both the average farmer and those farmers considered to be in the top 20% of the various land use areas. The analysis will provide a comprehensive overview of rural production in a free trade economy.

Time series analysis of a Web search engine transaction log

In this paper, we use time series analysis to evaluate predictive scenarios using search engine transactional logs. Our goal is to develop models for the analysis of searchers’ behaviors over time and investigate if time series analysis is a valid method for predicting relationships between searcher actions. Time series analysis is a method often used to understand the underlying characteristics of temporal data in order to make forecasts. In this study, we used a Web search engine transactional log and time series analysis to investigate users’ actions. We conducted our analysis in two phases. In the initial phase, we employed a basic analysis and found that 10% of searchers clicked on sponsored links. However, from 22:00 to 24:00, searchers almost exclusively clicked on the organic links, with almost no clicks on sponsored links. In the second and more extensive phase, we used a one-step prediction time series analysis method along with a transfer function method. The period rarely affects navigational and transactional queries, while rates for transactional queries vary during different periods. Our results show that the average length of a searcher session is approximately 2.9 interactions and that this average is consistent across time periods. Most importantly, our findings shows that searchers who submit the shortest queries (i.e., in number of terms) click on highest ranked results. We discuss implications, including predictive value, and future research.

Measuring episodic memory: A novel approach with an indefinite number of alternative forms

Both clinical practice and clinical research settings can require successive administrations of a memory test, particularly when following the trajectory of suspected memory decline in older adults. However, relatively few verbal episodic memory tests have alternative forms. We set out to create a broad based memory test to allow for the use of an essentially unlimited number of alternative forms. Four tasks for inclusion in such a test were developed. These tasks varied the requirement for recall as opposed to recognition, the need to form an association between unrelated words, and the need to discriminate the most recent list from earlier lists, all of which proved useful. A total of 115 participants completed the battery of tests and were used to show that the test could differentiate between older and younger adults; a sub-sample of 73 participants completed alternative forms of the tests to determine test-retest reliability and the amount of learning to learn.

The roles and importance of formal and informal sources of business support in young firms : evidence from the UK’s 2008 Federation of Small Business Survey

Objectives This research explores the relationship between young firms, their growth orientation-intention and a range of relationships which can be seen to provide business support. Prior-work Research indicates that networks impact the firm’s ability to secure resources (Sirmon and Hitt 2003; Liao and Welsch. 2004; Hanlon and Saunders 2007). Networks have been evaluated in a number of ways ranging from simple counts to characteristics of their composition (Davidsson and Honig 2003), strength of relationships (Granovetter 1973) and network diversity (Carter et al 2003). By providing access to resources and knowledge (from start-up assistance and raising capital, (e.g. Smallbone et al, 2003), networks may assist in enabling continued persistence during those times where firms may experience resource constraints owing to firm growth (Baker and Nelson 2005). Approach The data used in this research was generated in the 2008 UK Federation of Small Businesses (FSB) survey. Over 1,000 of the firms responding were found to fall into the category of “young”, ((defined as firms under 4 years old). Firms were considered the unit of analysis with the entrepreneur being the chief spokesperson for the firm. Preliminary data analysis considered key demographic characteristics and industry classifications, comparing the FSB data with that of the UK government’s own (BERR) Small Business Surveys of 2007 and 2008, to establish some degree of representativeness of the respondents. The analysis then examined networks with varying potential ability to provide support for young firms, the networks measured in terms of number, diversity, characteristic and strength in its relationship to young firm growth orientation. The diversity of business-support-related relationships ranged from friends and family, through professional services, customers and suppliers, and government business services, to trade associations and informal business networks. The characteristics of these formal and informal sources of support for new businesses are examined across a range of business support-type activities for new firms. The number of relationships and types of business support are also explored. Finally, the strength of these relationships is examined by analysis of the source of business support, type of business support, and links to the growth orientation-intention of the firm, after controlling for a number of key variables related to firm and industry status and owner characteristics. Results Preliminary analysis of the data by means of univariate analysis showed that average number of sources of advice was around 2.5 (from a potential total of 6). In terms of the diversity of relationships, universities had by far the smallest percentage of firms receiving beneficial advice from them. Government business services were beneficially used by 40% of young firms, the other relationship types being around the 50-55% mark. In terms of characteristics of the advice, the average number of areas in which benefit was achieved was around 5.5 of a maximum of 15. Start-up advice has by far the highest percentage of firms obtaining beneficial advice, with increasing sales, improving contacts and improving confidence being the other categories at or around the 50% mark. Other market-focused areas where benefits were also received were in the areas of new markets, existing product improvements and new product improvements, where around 40% of the young responding firms obtained benefit. Regression techniques evaluating the strength of these relationships in terms of the links between business support (by source of support, type of support, and range of support) and firm growth orientation-intention focus highlighted a number of significant relationships, even after controlling for a range of other explanatory variables identified in the literature. Specifically, there was found to be a positive relationship between receiving business advice generally (regardless of type or source) and growth orientation. This relationship was seen to be stronger, however, when looking at the number of types of beneficial advice received, and stronger again for the number of sources of this advice. In terms of individual sources of advice, customers and suppliers had the strongest relationship with growth, with Government business services also found to be significant. Combining these two sources was also seen to increase the strength of the relationship between these two sources of advice and growth orientation. In considering areas of support, growth was most strongly positively related to advice that benefited the development of new products and services, and also business confidence, but was negatively related to advice linked to business recovery. Finally, amalgamating the 4 key types and sources of advice to examine the impact of combinations of these types and sources of advice also improved the strength of the relationship. Implications The findings will assist in the understanding of young firms in general and growth more specifically, particularly the role and importance of specific sources, types and combinations of business support used more extensively by new young growth-oriented firms. Value This research may assist in processes designed to allow entrepreneurs to make better decisions; educators and support organizations to develop better advice and assistance, and Governments design better conditions for the creation of new growth-oriented businesses.

Learning to program : from pear-shaped to pairs

The consistently high failure rate in Queensland University of Technology’s introductory programming subject reflects a similar dilemma facing other universities worldwide. Experiments were conducted to quantify the effectiveness of collaborative learning on introductory level programming students over a number of semesters, replicating previous studies in this area. A selection of workshops in the introductory programming subject required students to problem-solve and program in pairs, mimicking the eXtreme Programming concept of pair programming. The failure rate for the subject fell from what had been an average of 30% since 2003 (with a high of 41% in 2006), to just 5% for those students who worked consistently in pairs.

Development of a particle number and particle mass emissions inventory for an urban fleet : a study in South-East Queensland

Motor vehicles are a major source of gaseous and particulate matter pollution in urban areas, particularly of ultrafine sized particles (diameters < 0.1 µm). Exposure to particulate matter has been found to be associated with serious health effects, including respiratory and cardiovascular disease, and mortality. Particle emissions generated by motor vehicles span a very broad size range (from around 0.003-10 µm) and are measured as different subsets of particle mass concentrations or particle number count. However, there exist scientific challenges in analysing and interpreting the large data sets on motor vehicle emission factors, and no understanding is available of the application of different particle metrics as a basis for air quality regulation. To date a comprehensive inventory covering the broad size range of particles emitted by motor vehicles, and which includes particle number, does not exist anywhere in the world. This thesis covers research related to four important and interrelated aspects pertaining to particulate matter generated by motor vehicle fleets. These include the derivation of suitable particle emission factors for use in transport modelling and health impact assessments; quantification of motor vehicle particle emission inventories; investigation of the particle characteristic modality within particle size distributions as a potential for developing air quality regulation; and review and synthesis of current knowledge on ultrafine particles as it relates to motor vehicles; and the application of these aspects to the quantification, control and management of motor vehicle particle emissions. In order to quantify emissions in terms of a comprehensive inventory, which covers the full size range of particles emitted by motor vehicle fleets, it was necessary to derive a suitable set of particle emission factors for different vehicle and road type combinations for particle number, particle volume, PM1, PM2.5 and PM1 (mass concentration of particles with aerodynamic diameters < 1 µm, < 2.5 µm and < 10 µm respectively). The very large data set of emission factors analysed in this study were sourced from measurement studies conducted in developed countries, and hence the derived set of emission factors are suitable for preparing inventories in other urban regions of the developed world. These emission factors are particularly useful for regions with a lack of measurement data to derive emission factors, or where experimental data are available but are of insufficient scope. The comprehensive particle emissions inventory presented in this thesis is the first published inventory of tailpipe particle emissions prepared for a motor vehicle fleet, and included the quantification of particle emissions covering the full size range of particles emitted by vehicles, based on measurement data. The inventory quantified particle emissions measured in terms of particle number and different particle mass size fractions. It was developed for the urban South-East Queensland fleet in Australia, and included testing the particle emission implications of future scenarios for different passenger and freight travel demand. The thesis also presents evidence of the usefulness of examining modality within particle size distributions as a basis for developing air quality regulations; and finds evidence to support the relevance of introducing a new PM1 mass ambient air quality standard for the majority of environments worldwide. The study found that a combination of PM1 and PM10 standards are likely to be a more discerning and suitable set of ambient air quality standards for controlling particles emitted from combustion and mechanically-generated sources, such as motor vehicles, than the current mass standards of PM2.5 and PM10. The study also reviewed and synthesized existing knowledge on ultrafine particles, with a specific focus on those originating from motor vehicles. It found that motor vehicles are significant contributors to both air pollution and ultrafine particles in urban areas, and that a standardized measurement procedure is not currently available for ultrafine particles. The review found discrepancies exist between outcomes of instrumentation used to measure ultrafine particles; that few data is available on ultrafine particle chemistry and composition, long term monitoring; characterization of their spatial and temporal distribution in urban areas; and that no inventories for particle number are available for motor vehicle fleets. This knowledge is critical for epidemiological studies and exposure-response assessment. Conclusions from this review included the recommendation that ultrafine particles in populated urban areas be considered a likely target for future air quality regulation based on particle number, due to their potential impacts on the environment. The research in this PhD thesis successfully integrated the elements needed to quantify and manage motor vehicle fleet emissions, and its novelty relates to the combining of expertise from two distinctly separate disciplines - from aerosol science and transport modelling. The new knowledge and concepts developed in this PhD research provide never before available data and methods which can be used to develop comprehensive, size-resolved inventories of motor vehicle particle emissions, and air quality regulations to control particle emissions to protect the health and well-being of current and future generations.