Análise comparativa entre Brasil e Alemanha sobre autoprodução de energia elétrica residencial

The energy crisis has affected many countries. With the growing warning with the emission in the atmosphere and the lack of resources, the seek for sustainable sources for energy genaration have become even bigger. Some Countries, as Germany, started first in this journey, creating an incentive program to self-generation with renewable sources (wind, photovoltaics, biomass, etc.), giving priority for smaller plants. In Germany the program called EEG started in 2004. In Brazil, since the beggining of 2012, the self-generators did not know how they could be beneficted for self-generation, and self-generation didn't become commun in the country. However, with NR 482, of April 17th, 2012, the parameters were defined, and the self-generator could have a guideline. Therewith, studyies can be redirected for a better knowlegde of the conditions the self-generator will be sujected, in addition to Germany's case as reference to compare with Brazil's case. In this paper these studies are made, focused in wind power (wind turbines) and photovoltaic panels

Estudo das principais políticas para melhoria da eficiência energética no setor elétrico

This paper aims at comparing the national and international incentive policies in energy efficiency investment and presenting the main trends, measures adopted and economical and environmental results obtained, as well as possible improvements and expansions of these programs. This analysis is justified by the current moment, not only of the Brazilian Power Systems (SEB) but also of the global power systems with the constant increase of demand and depletion of natural resources implying in a need of a better use of them and of the power they generate, which directly affects the losses on the generation, transmission, distribution and consumption of energy, in addition to reducing the impacts on the environment. At last but not least, through this study it was possible to gleam not only at new possible ways for these programs, but also failures and inefficiencies that can be improved in the measures currently being used

Estudo e análise comparativa da eficiência de um sistema alimentado por células fotovoltaicas para utilização em luminárias do tipo LED com e sem etapas de conversão

Energy efficiency is an increasingly important issue due to the current scenario where increasing demand is growing faster than the energy supplied. It is important, therefore, analyze and minimize electrical system losses. This study conducts a comparison of a system formed by a photovoltaic generator feeding an LED lamp directly without steps DC-AC -DC conversion, and a system using these conversion steps for the same lamp power. Losses in conversion steps are quantified and the degradation of power quality occurred due to conversion is evaluated

Análise do desempenho térmico de habitações populares da microrregião de Guaratinguetá - SP

Pós-graduação em Engenharia Mecânica - FEG

Demanda energética na sessão de exercício resistido com características de hipertrofia e resistência muscular localizada

Pós-graduação em Ciências da Motricidade - IBRC

Análise do comportamento da bateria utilizada em sistemas fotovoltáicos de pequeno porte

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise da viabilidade do uso de biogás gerado a partir de dejetos bovinos em microturbinas para fins de geração, cogeração e trigeração de energia

The use of digesters has become an important alternative for the proper disposal of organic agricultural wastes, serving as a solution to some environmental and health problems. Furthermore, the process of digestion provides commercially valuable by products such as biogas and bio fertilizer. The generation of biogas from agricultural waste, and its use in power generation systems has aroused great interest in rural areas because it enables supply in whole or in large part the energy demand of ownership by reducing production costs. The advent of technology has brought new forms of energy conversion of biogas, as the use of micro turbines specifies to be fuelled with biogas derived from the decomposition of organic matter in digesters, since it has a low level of methane in its composition, and high degree of impurities such as hydrogen sulphide, which are harmful to equipment and reduce the calorific value of biogas. The use of micro turbines behind other advantages like low emissions, great fuel flexibility and low maintenance. This paper presents an analysis of the feasibility of using biogas generated from cattle manure in micro turbines to generate electricity. Behind also an assessment of the energy potential that each animal has on various uses of biogas, and forms of energy recovery from the exhaust gases of the micro turbine. Also conducts an evaluation of the energy savings that the use of biogas aggregates properties.

Análise matemática e estatística da produtividade de lavouras cafeeiras agroquímica e orgânica na região da alta paulista

Studies with organic systems have shown the feasibility and ecological and social sustainability of these agroecosystems, unlike the systems agrochemicals (conventional) production. Some studies have concluded that for the model agrochemical exists less interaction between the flow of internal energy, basically the crop receives all inputs to production with no increase in "energy quality" within the system, while in the organic model of production has increased interaction between different resources in the system. The current economic and ecological crisis, exposed no sustainability of the production pattern of industrialized agriculture developed in a way, showing the dependence of developed countries on imports of agricultural commodities produced in the third world, among there coffee. Given these facts, developed a survey to identify problems in the Alta Paulista region, west of São Paulo State, in relation to coffee production systems. Actually, the fundamental problem, according to the research, farmers in this region, is to choose a viable production system correctly (environmental, social and economic); agrochemical or organic. The objectives of this study were to analyze the yield of production systems and agro-chemical and organic coffee in the period from 2003 to 2007, in 30 producing properties, located in this region, in order to point the production system to produce the highest yield. According to the methodology of CONAB, data collected were recorded on spreadsheets to be used as variables in statistical analysis models and mathematics. We performed a descriptive analysis of productivity data and were used for statistical analysis tests for parametric and nonparametric analysis of variance. The mathematical analyses of the curves were prepared with Origin for Windows 6.0 software, which uses numerical methods to fit the data supplied to a function of variable parameters. Unlike conventional systems of production, the organic system showed greater viability of the production model. Furthermore, with the quantitative modeling proposal, it is possible to perform the evaluation of these types of investments, providing more security to the farmer at the time of decision.

Análise parâmetros elétricos consumo, fator de carga e demanda de empresas de refino de óleo vegetal

Empresas muitas vezes tem seu consumo de energia elétrica descontrolados por possuírem motores elétricos muitas vezes super-dimensionados, trabalhando em vazio ou em horário de pico. Sendo este tipo de atividade responsável por grande parte do gasto energético da empresa. Existem dois fatores que avaliam o modo de utilização desta energia, denominados fator de potência (fp) e fator de carga (fc), que indicam a eficiência e racionalidade da forma de utilização da energia elétrica, respectivamente. A necessidade de uma avaliação global da utilização da energia, levando em consideração os dois fatores citados, é realizada por especialistas da área energética para a determinação da situação real da empresa. Podendo ser uma tarefa árdua muitas vezes demorada. Para isto é necessária uma análise estatística descritiva dos dados. Este trabalho tem como objetivo realizar esta analise de dados de uma empresa de refino de óleo vegetal.

Metodologia de determinação de funções de pertinência de controla-dores fuzzy para a avaliação energética de empresas de avicultura de postura

The objective of this work is to determine the membership functions for the construction of a fuzzy controller to evaluate the energy situation of the company with respect to load and power factors. The energy assessment of a company is performed by technicians and experts based on the indices of load and power factors, and analysis of the machines used in production processes. This assessment is conducted periodically to detect whether the procedures performed by employees in relation to how of use electricity energy are correct. With a fuzzy controller, this performed can be done by machines. The construction of a fuzzy controller is initially characterized by the definition of input and output variables, and their associated membership functions. We also need to define a method of inference and a processor output. Finally, you need the help of technicians and experts to build a rule base, consisting of answers that provide these professionals in function of characteristics of the input variables. The controller proposed in this paper has as input variables load and power factors, and output the company situation. Their membership functions representing fuzzy sets called by linguistic qualities, as “VERY BAD” and “GOOD”. With the method of inference Mandani and the processor to exit from the Center of Area chosen, the structure of a fuzzy controller is established, simply by the choice by technicians and experts of the field energy to determine a set of rules appropriate for the chosen company. Thus, the interpretation of load and power factors by software comes to meeting the need of creating a single index that indicates an overall basis (rational and efficient) as the energy is being used.

Análise diferencial da potência máxima gerada por um sistema solar fotovoltaico

The Earth receives annually 1,5.1018 kWh of solar energy, which corresponds to 1000 times the world energy consumption in this period. This fact comes out that, besides being responsible for the maintenance of life on Earth, the solar radiation is in an inexhaustible energy source, with an enormous potential for use by systems capture and conversion into another form of energy. In many applications of low power systems that convert light directly into electricity, called photovoltaic advantageously replace other means of production processes, where its distribution is very significant. The determination of the power generated by such a system is of paramount importance for the design energy of its implementation and evaluation of the system itself. This study aims to determine a relationship between the maximum power generated by solar photovoltaic and characteristic parameters of the generator. This relationship allows to evaluate the performance of such a system. For simulations of the developed equations were used 3 photovoltaic modules with an output of 100 Wp each, and data collection was performed during one year by enrolling in addition to meteorological data, solar irradiance incident on the modules.

Análise matemática da potência gerada por sistemas fotovoltáicos e suas aplicações

A radiação solar constitui-se numa inesgotável fonte energética, havendo um enorme potencial de utilização por meio de sistemas de captação e conversão em outra forma de energia. Para a conversão direta da energia solar em elétrica, são utilizadas células fotovoltaicas constituídas, que associadas constituem um módulo fotovoltaico, sendo que também quando agrupados, formam painéis fotovoltaicos. Estes painéis associados a outros equipamentos que transformam ou armazenam energia elétrica para que ela possa ser utilizada é chamado de sistema fotovoltaico. Neste trabalho, foram determinadas analiticamente formas de obtenção de curvas de corrente e potência fotovoltaicas, e também o ponto de potência máxima. Tais métodos foram aplicados no sistema fotovoltaico localizado na FCA/UNESP, sendo utilizado um sistema constituído por três módulos fotovoltaicos. Para o desenvolvimento das equações que regem a potência dos sistemas fotovoltaicos, procurou-se estudar o circuito elétrico de células fotovoltaicas, sendo necessária também a aplicação de métodos numéricos iterativos para a determinação de alguns parâmetros elétricos. De acordo com os teoremas apresentados, foi possível determinar as expressões analíticas da resistência série e do ponto de potência máxima de uma célula fotovoltaica, possibilitando a geração dos gráficos de tais funções com os dados obtidos experimentalmente. Comparando-se os valores obtidos pelas funções com os valores padrões do sistema fotovoltaico instalado, o valor calculado apresentou um erro de 1,03% em relação ao dado pelo fabricante, representando uma excelente aproximação. Desta forma, pode-se concluir que os métodos e teoremas dos sistemas fotovoltaicos apresentados podem servir de auxílio a futuros dimensionamentos para aplicações destes sistemas.

Análises energética e econômica da produção de leitões de produtores familiares do Oeste do Paraná

The present study aimed to analyze indicators of energy efficiency and economic production of piglets from family farmers in Paraná. We sought to determine possible differences in energy efficiencies and economic producers who manufactured rations on their property and those who bought rations Cooperative. The sample was obtained by accessibility (six producers who manufactured and six who bought rations) and not probabilistic, and the raw data were transformed into energy and economic units, and processed in electronic spreadsheets. The two production systems of piglets in the nursery phase, family farming, showed negative energy balance, with energy inputs higher than outputs. The two systems of rearing piglets showed no differences in energy efficiency, ie, they were not self-sufficient and needed to import energy sources from other systems. The indicators of economic efficiency of producers who buy rations as those who produce them in their properties were less than unity. Thus, most producers did not generate enough revenue to pay the costs in the short term and lost money.

Demanda energética de máquinas agrícolas na implantação da cultura do sorgo forrageiro

Forage sorghum can be grown in areas and environmental conditions dry and warm, where the productivity of other forage plants can often be uneconomical. The soil disturbance can be made only on the lines of planting (direct seeding) or entirely from the area for seeding (conventional tillage), as plowing, harrowing, subsoiling and chiseling (minimum tillage). The displacement speed ideal for planting is one in which the groove is opened and closed without removing the over-ground, allowing the distribution of seed spacing and depth constant. The experiment was conducted in a soil classified as Typic Oxisol at Lageado Experimental Farm, Faculty of Agronomic Sciences, UNESP, Botucatu campus. This study aimed to evaluate the response of sorghum in four forward speeds (3, 5, 6 and 9 km h-1) and four systems of soil management: SD (direct seeding), GP (harrow + sowing), LPG (disc harrow and two light disking + sowing) and CR (scarification and seeding). Data was subjected to analysis of variance in a factorial 4 x 4 and a randomized block design with split plots. The following parameters were determined: average speed, average strength of the drawbar, the average power drawbar, theoretical field capacity of the tractor-equipment, fuel consumption per hour. For the conditions under which the experiment was conducted, it was concluded that the hourly fuel consumption was not influenced by tillage systems and was inversely proportional to the increase of speed work, and that the change of speed in the sowing operation did not provide additional the values of average traction force on the bar of the tractor-planter.

Características agronômicas e demanda energética de cultivares de soja sob efeito dos sistemas de preparo do solo

The aim of this study was to evaluate the influence of preparation: intermediate grade, minimum tillage and no-till on the agronomic characteristics and energy demand of transgenic soybean cultivars and non-GMO soybeans. Soil preparation aims at improving physical, chemical and biological conditions, aiming at good emergence and plant development. The different types of tillage may interfere with the agronomic characteristics and productivity of plants, and in energy use which can cause variation in production costs. Genetically modified plants can be one of the alternatives for reduction of production costs in crops by reducing pesticide applications, enabling higher productivity with less environmental impact. The test was conducted in 2010/2011 at the agricultural Experimental Farm Lageado, belonging to the Faculty of Agronomic Sciences – UNESP, located in the city of Botucatu, SP in an area using no-till systems for the past 12 years. The experiment was carried out in a 3 x 2 factorial, randomized treatments were comprised of three soil preparation systems, minimum cultivation, intermediate grade preparation and no-till, with two cultivars of soybeans: MGBR-46 Conquest (conventional), Valuable RR (Transgenic). The data obtained was submitted to variance analysis using Tukey test at a 5% probability. With the results analyzed it might be observed that there was no significant difference between treatments, in the variables, the percentage of soil cover, final soybean plant population, grain yield and plant height. The results obtained show that the no-till system resulted in higher productivity than conventional tillage and minimum cultivation. The higher specific energy use per area was observed in minimum cultivation with a chisel plough, when compared to the preparation across the grid. The greatest fuel consumption was to treat minimum cultivation with chisel plough. The highest values were found in the skating system of minimum cultivation, being greater in conventional tillage system. It is more satisfactory for the producer to sow transgenic soy using a no-till system, because productivity retrieved from that system compensates for fuel expenditure.