Oak Mere cSAC

This is the report on Habitats Directive, the Review of Consents Stage 1 and 2 by the Environment Agency of the Oak Mere cSAC. The Habitats Directive has the main aim to promote the maintenance of biodiversity by defining a common framework for the conservation of wild plants and animals and habitats of community interest. The Directive establishes a European ecological network known as "Natura 2000". The network comprises Special Areas of Conservation (SAC) and Special Protection Areas (SPA). In the section on Stage 1 or Screening Process of the Habitat Directive, it is identified the likely impacts upon the Oak Mere cSAC of a project, plan or activities, either alone or in combination with other projects, plans or activities, and considers whether these impacts are likely to be significant. In the section on Stage 2 or Appropiate Assessment of the Habitat Directive, it is considered the impact on the integrity of the Oak Mere cSAC of the projects, plans or activities, either alone or in combination with other projects, plans or activities, with respect to the site’s structure and function and its conservation objectives. Additionally, where these are adverse impacts, an assessment of the potential mitigation of those impacts. The criteria used in this report to identify relevant projects, plans or activities and their impacts are water quality discharge consents, waste management licences, abstraction licences, Integration Pollution Control (IPC) and Integrated Pollution Prevention Control (IPPC) permits. Proformas, hydrogeological and GIS maps are included in the review.

River Leith fluvial aufit. Final project report

This is the River Leith fluvial audit: Final project report produced by Lancaster University in 1998. Freeze cores extracted from the upper and lower ends of River Leith illustrate that the bed is highly compacted in the downstream reach. Fine material is locally derived from bedrock at depths of only 32 cms into the bed and in one core fine material is 66% of the extracted core. Levels of fines that are believed to be detrimental to fish are put at 20 to 30%. Reduced flow and stream power from water abstraction may lead to a greater infiltration of fine material if gravels are not regularly flushed through with flood flows. Infiltration of fine material can lead to river bed compaction and concretion. A small abstraction may have no effect on the morphology of a river if the reduced discharge is within the normal range of flows experienced. However if the impact on flows is small it is still possible that fine sediment problems will develop progressively and the effects may not be noticed for several years.

Fisheries survey of the River Otter 1978

This is the Fisheries survey of the River Otter report produced by South West Water Authority in 1979. This report focuses on the trout fishery in the River Otter and the possible effects of abstraction and/or pollution. A survey was carried out to describe the fish stocks. Trout and eels were the dominant species. The population structure of trout was peculiar, there being relatively few juveniles. Growth was good and there were numerous trout of take able size in the river at the end of the fishing season. Variations in the parameters measured are explained and nothing can be attributed to abstraction or pollution.

River Bray fisheries survey 1978-80

This is the River Bray fisheries survey 1978-80 report produced by South West Water Authority in 1981. This report aims to assess the possible effects of new abstraction conditions at Leahamford on the fish communities of the River Bray, surveys have been carried out in 1978, 197S and 1980. Field work was done in August and September each; year. Abstraction began in summer 1979. On the River Bray one site upstream and three downstream of Leahamford were chosen. One site on the River Mole was surveyed and is considered as a control site, being not directly affected by abstraction. The sketch map shows these sites in relation to Leahamford.

Impact of dead and sunken water hyacinth on biotic communities, the aquatic environment and socio-economic activities

The mobile water hyacinth, which was produced in growth zones, especially Murchison Bay, was mainly exported to three sheltered storage bays (Thruston, Hannington and Waiya). Between 1996 and May 1998, the mobile form of water hyacinth occupied about 800 ha in Thruston Bay, 750 ha in Hannington Bay and 140 ha in Waiya Bay). Biological control weevils and other factors, including localised nutrient depletion, weakened the weed that was confined to the bays and it sunk around October 1998. The settling to the bottom of such huge quantities of organic matter its subsequent decomposition and the debris from this mass was likely to have environmental impacts on biotic communities (e.g. fish and invertebrate), physico-chemical conditions (water quality), and on socio-economic activities (e.g. at fish landings, water abstraction, and hydro-power generation points). Sunken water. hyacinth debris could also affect nutrient levels in the water column and lead to reduction in the content of dissolved oxygen. The changes in nutrient dynamics and oxygen levels could affect algal productivity, invertebrate composition and fish communities. Socio-economic impacts of dead sunken weed were expected from debris deposited along the shoreline especially at fish landings, water abstraction and hydropower generation points. Therefore, environmental impact assessment studies were carried out between 1998 and 2002 in selected representative zones of Lake Victoria to identify the effects of the sunken water hyacinth biomass

Simulating intertwined design processes that have similar structures: A case study of a small company that creates made-to-order fashion products

The authors use simulation to analyse the resource-driven dependencies between concurrent processes used to create customised products in a company. Such processes are uncertain and unique according to the design changes required. However, they have similar structures. For simulation, a level of abstraction is chosen such that all possible processes are represented by the same activity network. Differences between processes are determined by the customisations that they implement. The approach is illustrated through application to a small business that creates customised fashion products. We suggest that similar techniques could be applied to study intertwined design processes in more complex domains. Copyright © 2011 Inderscience Enterprises Ltd.

Contact and channel modelling using part and function libraries in a function-based design approach

To support the development and analysis of engineering designs at the embodiment stage, designers work iteratively with representations of those designs as they consider the function and form of their constituent parts. Detailed descriptions of "what a machine does" usually include flows of forces and active principles within the technical system, and their localization within parts and across the interfaces between them. This means that a representation should assist a designer in considering form and function at the same time and at different levels of abstraction. This paper describes a design modelling approach that enables designers to break down a system architecture into its subsystems and parts, while assigning functions and flows to parts and the interfaces between them. In turn, this may reveal further requirements to fulfil functions in order to complete the design. The approach is implemented in a software tool which provides a uniform, computable language allowing the user to describe functions and flows as they are iteratively discovered, created and embodied. A database of parts allows the user to search for existing design solutions. The approach is illustrated through an example: modelling the complex mechanisms within a humanoid robot. Copyright © 2010 by ASME.

Capture fisheries in Uganda: why Bujagali hydro-power project and ecological monitoring?

Human use of water resow-ces in Uganda has grown and intensified along with population growth and increasing demand to meet the diverse human needs. In the case of Uganda's rivers, the main uses include fisheries, hydropower generation, abstraction for potable water supply, discharge of sewage and navigation. All these uses can disrupt the integrity of the aquatic ecosystem and may affect the survival of the diversity of organisms. In consideration of the need to increase electricity to meet demand, the Bujagali Hydro-power Project (BHPP) and the National Environment Management Authority (NEMA) recognised the importance of safeguards to mitigate impacts of the project. The National Fisheries Resources Research Institute (NaFIRRI) was assigned the role of providing baseline information on the aquatic ecosystem of the Upper Victoria Nile and to follow up the findings with a monitoring framework during construction and post-commissioning phases.

User responses to the learning demands of consumer products

Designers are typically male, under 35 years old and unimpaired. Users can be of any age and currently over 15% will have some form of impairment. As a result a vast array of consumer products suit youthful males and in many cases exclude other demographics (e.g. Keates and Clarkson, 2004). In studying the way a range of users learn how to use new products, key cognitive difficulties are revealed and linked back to the areas of the product causing the problems. The trials were structured so each user had to complete a specific set of tasks and were consistent across the user spectrum. The tasks set aimed to represent both everyday usage and less familiar functions. Whilst the knowledge gained could provide designers with valuable guidelines for the specific products examined, a more general abstraction provides knowledge of the pitfalls to avoid in the design of other product families.

Improving data quality in DSM modelling: A structural comparison approach

The Dependency Structure Matrix (DSM) has proved to be a useful tool for system structure elicitation and analysis. However, as with any modelling approach, the insights gained from analysis are limited by the quality and correctness of input information. This paper explores how the quality of data in a DSM can be enhanced by elicitation methods which include comparison of information acquired from different perspectives and levels of abstraction. The approach is based on comparison of dependencies according to their structural importance. It is illustrated through two case studies: creation of a DSM showing the spatial connections between elements in a product, and a DSM capturing information flows in an organisation. We conclude that considering structural criteria can lead to improved data quality in DSM models, although further research is required to fully explore the benefits and limitations of our proposed approach.

径流曲线法在黄土区小流域地表径流预测中的初步应用

径流曲线法是目前国际上预测无径流观测资料地区降水地表产流的主要模型,由于气候、水文及下垫面的差异,在黄土高原地区的应用受到限制。利用黄土高原地区3个小流域的303场降雨径流资料,针对黄土高原降雨地表径流特点优化模型中的初损率λ,并提出降雨强度修正函数,将降雨强度因子引入径流曲线法。优化后的模型效率E达到0.812,实测径流深与预测径流深的线性回归决定系数R2达到0.822。改进后的SCS-CN模型可用于黄土区小流域降雨地表产流预报,对黄土高原无资料地区侵蚀产流预报、指导水土保持工程配置和设计具有重要的理论和工程实践意义。

State-to-state dynamics of elementary chemical reactions using Rydberg H-atom translational spectroscopy

In this review, a few examples of state-to-state dynamics studies of both unimolecular and bimolecular reactions using the H-atom Rydberg tagging TOF technique were presented. From the H2O photodissociation at 157 nm, a direction dissociation example is provided, while photodissociation of H2O at 121.6 has provided an excellent dynamical case of complicated, yet direct dissociation process through conical intersections. The studies of the O(D-1) + H-2 --> OH+H reaction has also been reviewed here. A prototype example of state-to-state dynamics of pure insertion chemical reaction is provided. Effect of the reagent rotational excitation and the isotope effect on the dynamics of this reaction have also been investigated. The detailed mechanism for abstraction channel in this reaction has also been closely studied. The experimental investigations of the simplest chemical reaction, the H-3 system, have also been described here. Through extensive collaborations between theory and experiment, the mechanism for forward scattering product at high collision energies for the H+HD reaction was clarified, which is attributed to a slow down mechanism on the top of a quantized barrier transition state. Oscillations in the product quantum state resolved different cross sections have also been observed in the H+D-2 reaction, and were attributed to the interference of adiabatic transition state pathways from detailed theoretical analysis. The results reviewed here clearly show the significant advances we have made in the studies of the state-to-state molecular reaction dynamics.

Close-coupling time-dependent quantum dynamics study of the H+HCl reaction

The paper presents a theoretical study of the dynamics of the H + HCl system on the potential energy surface (PES) of Bian and Werner (Bian, W.; Werner, H. -J., J. Chem. Phys. 2000, 112, 220). A time-dependent wave packet approach was employed to calculate state-to-state reaction probabilities for the exchanged and abstraction channels. The most recent PES for the system has been used in the calculations. Reaction probabilities have also been calculated for several values of the total angular momentum J > 0. Those have then been used to estimate cross sections and rate constants for both channels. The calculated cross sections can be compared with the results of previous quasiclassical trajectory calculations and reaction dynamics experimental on the abstraction channel. In addition, the calculated rate constants are in the reasonably good agreement with experimental measurement.

Quantum dynamics study of isotope effect for H+CH4 reaction using the SVRT model

The semirigid vibrating rotor target model is applied to study the isotope effect in reaction H + CH4-->H-2 + CH3 using time-dependent wave-packet method. The reaction probabilities for producing H-2 and HD product channels are calculated. The energy dependence of the reaction probabilities shows oscillating structures for both reaction channels. At low temperature or collision energies, the H atom abstraction is favored due to tunnelling effect. In partially deuterated CHxDy (x + y = 4), the breaking of the C-H bond is favored over that of the C-D bond in the entire energy range studied. In H + CHD3 reaction at high energies, the HD product dominates simply due to statistical factor. (C) 2003 American Institute of Physics.

Theoretical studies of product polarization and state distributions of the H+HCl reaction

The angular momentum polarization and rotational state distributions of the H-2 and HCl products from the H + HCl reaction are calculated at a relative translational energy of 1.6 eV by using quasiclassical trajectories on two potential energy surfaces, one from G3 surface [T.C. Allison et al., J. Phys. Chem. 100 (1996) 13575], and the other from BW2 surface [W. Bian, H.-J. Werner, J. Chem. Phys. 112 (2000) 220]. Product rotational distributions obtained on the G3 potential energy surface (PES) are much closer to the experimental results (P.M. Aker et al., J. Chem. Phys. 90 (1989) 4795; J. Chem. Phys. 90 (1989) 4809) than the distributions calculated on the BW2 PES. The distributions of P(phi(r)) for the H-2 and HCl products obtained on the G3 PES are similar, whereas the rotational alignment effect of the H-2 product is stronger than that of the HCl product. In contrast to the polarization distributions obtained on the G3 PES, the rotational alignment effect of the two products calculated on the BW2 PES is similar. However, the abstraction reaction is dominated by out-of-plane mechanisms, while the exchange reaction is dominated by in-plane mechanisms. The significant difference of the product rotational polarization obtained on the G3 and BW2 PESs implies that the studies of the dynamical stereochemistry can provide a sensitive test for the accuracy of the PES. (C) 2002 Elsevier Science B.V. All rights reserved.