904 resultados para yield curve
Resumo:
Observations of individual weight, duration of development and production of different stages of Tropodiaptomus incognitus are presented. The study is based on data gathered from Lake Chad in 1968.
Resumo:
PART I
The total cross-section for the reaction 21Ne(α, n)24Mg has been measured in the energy range 1.49 Mev ≤ Ecm ≤ 2.6 Mev. The cross-section factor, S(O), for this reaction has been determined, by means of an optical model calculation, to be in the range 1.52 x 1012 mb-Mev to 2.67 x 1012 mb-Mev, for interaction radii in the range 5.0 fm to 6.6 fm. With S(O) ≈ 2 x 1012 mb-Mev, the reaction 21Ne(α, n)24Mg can produce a large enough neutron flux to be a significant astrophysical source of neutrons.
PART II
The reaction12C(3He, p)14N has been studied over the energy range 12 Mev ≤ Elab ≤ 18 Mev. Angular distributions of the proton groups leading to the lowest seven levels in 14N were obtained.
Distorted wave calculations, based on two-nucleon transfer theory, were performed, and were found to be reliable for obtaining the value of the orbital angular momentum transferred. The present work shows that such calculations do not yield unambiguous values for the spectroscopic factors.
Resumo:
International fisheries agencies recommend exploitation paths that satisfy two features. First, for precautionary reasons exploitation paths should avoid high fishing mortality in those fisheries where the biomass is depleted to a degree that jeopardise the stock's capacity to produce the Maximum Sustainable Yield (MSY). Second, for economic and social reasons, captures should be as stable (smooth) as possible over time. In this article we show that a conflict between these two interests may occur when seeking for optimal exploitation paths using age structured bioeconomic approach. Our results show that this conflict be overtaken by using non constant discount factors that value future stocks considering their relative intertemporal scarcity.
Resumo:
YAlO3 single crystal doped with Ce3+ at concentration 1% was grown by the temperature gradient technique. The as-grown crystal was pink. After H-2 annealing or air annealing at 1400degreesC for 20 h, the crystal was turned into colorless. We concluded there were two kinds of color centers in the as-grown crystal. One is F+ center attributed to absorption band peaking at about 530 nm, the other is O- center attributed to absorption band peaking at about 390 nm. This color centers model can be applied in explaining the experiment phenomena including the color changes, the absorption spectra changes, and the light yield changes of Ce:YAP crystals before and after annealing. (C) 2004 American Institute of Physics.
Resumo:
Growth is one of the most important characteristics of cultured species. The objective of this study was to determine the fitness of linear, log linear, polynomial, exponential and Logistic functions to the growth curves of Macrobrachium rosenbergii obtained by using weekly records of live weight, total length, head length, claw length, and last segment length from 20 to 192 days of age. The models were evaluated according to the coefficient of determination (R2), and error sum off square (ESS) and helps in formulating breeders in selective breeding programs. Twenty full-sib families consisting 400 PLs each were stocked in 20 different hapas and reared till 8 weeks after which a total of 1200 animals were transferred to earthen ponds and reared up to 192 days. The R2 values of the models ranged from 56 – 96 in case of overall body weight with logistic model being the highest. The R2 value for total length ranged from 62 to 90 with logistic model being the highest. In case of head length, the R2 value ranged between 55 and 95 with logistic model being the highest. The R2 value for claw length ranged from 44 to 94 with logistic model being the highest. For last segment length, R2 value ranged from 55 – 80 with polynomial model being the highest. However, the log linear model registered low ESS value followed by linear model for overall body weight while exponential model showed low ESS value followed by log linear model in case of head length. For total length the low ESS value was given by log linear model followed by logistic model and for claw length exponential model showed low ESS value followed by log linear model. In case of last segment length, linear model showed lowest ESS value followed by log linear model. Since, the model that shows highest R2 value with low ESS value is generally considered as the best fit model. Among the five models tested, logistic model, log linear model and linear models were found to be the best models for overall body weight, total length and head length respectively. For claw length and last segment length, log linear model was found to be the best model. These models can be used to predict growth rates in M. rosenbergii. However, further studies need to be conducted with more growth traits taken into consideration
Resumo:
For the first time, a quaternary doping system of Er3+, Yb3+, Ce3+, Na+:CaF2 single crystal was demonstrated to have high fluorescence yield in the eye-safe 1.5 mu m region under 980 nm laser diode pumping, with relatively broad and flat gain curves. A simplified model was established to illustrate the effect of Ce3+ on the branching ratio for the Er3+4I11/2 -> I-4(13/2) transition. With 0.2-at.% Er3+ and 2.0-at.% Ce3+ in the quaternary-doped CaF2 crystal, the branching ratio was estimated to be improved more than 40 times by the deactivating effect of Ce3+ on the Er3+ 4I11/2 level. The quaternary-doped CaF2, system shows great potential to achieve high laser performance in the 1.5 mu m region. (c) 2006 Elsevier B.V. All rights reserved.
Resumo:
The occurrence of seasonal variations in growth is confirmed. The mean annual growth curve obtained is not different from that obtained by modal progression analysis. The comparison with results obtained by other authors in Florida did not permit to point out any sensible difference and the author concludes that the phenomena are quite similar but that it would be better, for yield computations, to use the observed age-length keys instead of the computed parameters.
Resumo:
A necessidade de se obter soluções para os diversos problemas estruturais na engenharia, associado ao amplo crescimento e difusão da construção metálica fez surgir, por volta dos anos 60, os perfis tubulares. As ligações soldadas entre perfis tubulares são as ligações de maior difusão nas construções com este tipo de perfil, sendo necessário portanto, estudos mais detalhados que tornem a utilização de ligações soldadas mais seguras e otimizadas. O Eurocode 3 possui um item específico para as ligações entre perfis tubulares, em especial as ligações soldadas devido a suas particularidades. Infelizmente, a norma brasileira NBR8800 não aborda as ligações envolvendo perfis tubulares. Para a execução da análise numérica no presente trabalho, faz-se necessário uma revisão bibliográfica. Com estes resultados, foram feitas modelagens de ligações tubulares com o método dos elementos finitos de forma a otimizar os modelos a serem utilizados em uma análise paramétrica futura. Desta forma, foram desenvolvidos dois modelos numéricos, um considerando ligação tipo T entre perfis tubulares quadrados e outro para uma ligação tipo K entre perfis circulares. Estes modelos foram caracterizados através de elementos de casca com seis graus de liberdade por nó considerando-se adicionalmente o efeito de membrana. A análise não-linear realizada considerou a não-linearidade do material através do critério de plastificação de Von Mises através de uma lei constitutiva tensão versus deformação bi-linear e a não-linearidade geométrica foi atribuída através da formulação de Lagrange atualizado. Dentre as principais conclusões obtidas no presente trabalho, pode-se citar que os resultados para as ligações tipo T, o Eurocode 3, fornece resultados que precisam ser observados com cautela. Todavia, para as ligações do tipo K, os resultados numéricos mostraram-se sempre inferiores aos valores através do Eurocode 3, representando um dimensionamento a favor da segurança.
Resumo:
A compilation of 48 estimates of Caribbean and Pacific coral reef fish catches, ranging from 0.1 to 23.7 t km super(-2) year super(-1), obtained from coral reef areas ranging from 0.1 to nearly 4-10 super(5) km super(2), are used to show that observed catches, and hence potential yield estimates, depend strongly on the reference area. The implications for coral reef fisheries assessments are discussed.
Resumo:
The von Bertalanffy growth function is used for length based analysis of growth and mortality patterns for management of fisheries. However, certain fish have growth patterns that the VBGF may not be able to describe adequately.e.g. the Acanthurus lineatus in Samoa. In such cases a two phase VBGF may be a useful approach.