946 resultados para transmission-line matrix methods
Resumo:
Double three-phase transmission lines are analyzed in this paper using a modal transformation model. The main attribute of this model is the use of a single real transformation matrix based on line geometrical characteristics and the Clarke matrix. Because of this, for any line point, the electrical values can be accessed for phase domain or mode domain using the considered transformation matrix and without convolution methods. For non-transposed symmetrical lines the errors between the model results and the exact modes are insignificant values. The eigenvector and eigenvalue analyses for transposed lines search the similarities among the three analyzed transposition types and the possible simplifications for a non-transposed case.
Resumo:
The aim of this thesis is to study the mechanisms of instability that occur in swept wings when the angle of attack increases. For this, a simplified model for the a simplified model for the non-orthogonal swept leading edge boundary layer has been used as well as different numerical techniques in order to solve the linear stability problem that describes the behavior of perturbations superposed upon this base flow. Two different approaches, matrix-free and matrix forming methods, have been validated using direct numerical simulations with spectral resolution. In this way, flow instability in the non-orthogonal swept attachment-line boundary layer is addressed in a linear analysis framework via the solution of the pertinent global (Bi-Global) PDE-based eigenvalue problem. Subsequently, a simple extension of the extended G¨ortler-H¨ammerlin ODEbased polynomial model proposed by Theofilis, Fedorov, Obrist & Dallmann (2003) for orthogonal flow, which includes previous models as particular cases and recovers global instability analysis results, is presented for non-orthogonal flow. Direct numerical simulations have been used to verify the stability results and unravel the limits of validity of the basic flow model analyzed. The effect of the angle of attack, AoA, on the critical conditions of the non-orthogonal problem has been documented; an increase of the angle of attack, from AoA = 0 (orthogonal flow) up to values close to _/2 which make the assumptions under which the basic flow is derived questionable, is found to systematically destabilize the flow. The critical conditions of non-orthogonal flows at 0 _ AoA _ _/2 are shown to be recoverable from those of orthogonal flow, via a simple analytical transformation involving AoA. These results can help to understand the mechanisms of destabilization that occurs in the attachment line of wings at finite angles of attack. Studies taking into account variations of the pressure field in the basic flow or the extension to compressible flows are issues that remain open. El objetivo de esta tesis es estudiar los mecanismos de la inestabilidad que se producen en ciertos dispositivos aerodinámicos cuando se aumenta el ángulo de ataque. Para ello se ha utilizado un modelo simplificado del flujo de base, así como diferentes técnicas numéricas, con el fin de resolver el problema de estabilidad lineal asociado que describe el comportamiento de las perturbaciones. Estos métodos; sin y con formación de matriz, se han validado utilizando simulaciones numéricas directas con resolución espectral. De esta manera, la inestabilidad del flujo de capa límite laminar oblicuo entorno a la línea de estancamiento se aborda en un marco de análisis lineal por medio del método Bi-Global de resolución del problema de valores propios en derivadas parciales. Posteriormente se propone una extensión simple para el flujo no-ortogonal del modelo polinomial de ecuaciones diferenciales ordinarias, G¨ortler-H¨ammerlin extendido, propuesto por Theofilis et al. (2003) para el flujo ortogonal, que incluye los modelos previos como casos particulares y recupera los resultados del analisis global de estabilidad lineal. Se han realizado simulaciones directas con el fin de verificar los resultados del análisis de estabilidad así como para investigar los límites de validez del modelo de flujo base utilizado. En este trabajo se ha documentado el efecto del ángulo de ataque AoA en las condiciones críticas del problema no ortogonal obteniendo que el incremento del ángulo de ataque, de AoA = 0 (flujo ortogonal) hasta valores próximos a _/2, en el cual las hipótesis sobre las que se basa el flujo base dejan de ser válidas, tiende sistemáticamente a desestabilizar el flujo. Las condiciones críticas del caso no ortogonal 0 _ AoA _ _/2 pueden recuperarse a partir del caso ortogonal mediante el uso de una transformación analítica simple que implica el ángulo de ataque AoA. Estos resultados pueden ayudar a comprender los mecanismos de desestabilización que se producen en el borde de ataque de las alas de los aviones a ángulos de ataque finitos. Como tareas pendientes quedaría realizar estudios que tengan en cuenta variaciones del campo de presión en el flujo base así como la extensión de éste al caso de flujos compresibles.
Resumo:
Thesis (Master's)--University of Washington, 2016-08
Resumo:
The basic reproduction number is a key parameter in mathematical modelling of transmissible diseases. From the stability analysis of the disease free equilibrium, by applying Routh-Hurwitz criteria, a threshold is obtained, which is called the basic reproduction number. However, the application of spectral radius theory on the next generation matrix provides a different expression for the basic reproduction number, that is, the square root of the previously found formula. If the spectral radius of the next generation matrix is defined as the geometric mean of partial reproduction numbers, however the product of these partial numbers is the basic reproduction number, then both methods provide the same expression. In order to show this statement, dengue transmission modelling incorporating or not the transovarian transmission is considered as a case study. Also tuberculosis transmission and sexually transmitted infection modellings are taken as further examples.
Resumo:
In this study, further improvements regarding the fault location problem for power distribution systems are presented. The proposed improvements relate to the capacitive effect consideration on impedance-based fault location methods, by considering an exact line segment model for the distribution line. The proposed developments, which consist of a new formulation for the fault location problem and a new algorithm that considers the line shunt admittance matrix, are presented. The proposed equations are developed for any fault type and result in one single equation for all ground fault types, and another equation for line-to-line faults. Results obtained with the proposed improvements are presented. Also, in order to compare the improvements performance and demonstrate how the line shunt admittance affects the state-of-the-art impedance-based fault location methodologies for distribution systems, the results obtained with two other existing methods are presented. Comparative results show that, in overhead distribution systems with laterals and intermediate loads, the line shunt admittance can significantly affect the state-of-the-art methodologies response, whereas in this case the proposed developments present great improvements by considering this effect.
Resumo:
We propose quadrature rules for the approximation of line integrals possessing logarithmic singularities and show their convergence. In some instances a superconvergence rate is demonstrated.
Resumo:
A proteomics approach was used to identify the proteins potentially implicated in the cellular response concomitant with elevated production levels of human growth hormone in a recombinant Chinese hamster ovary (CHO) cell line following exposure to 0.5 mM butyrate and 80 muM zinc sulphate in the production media. This involved incorporation of two-dimensional (2-D) gel electrophoresis and protein identification by a combination of N-terminal sequencing, matrix-assisted laser desorption/ionisation-time of flight mass spectrometry, amino acid analysis and cross species database matching. From these identifications a CHO 2-D reference,map and annotated database have been established. Metabolic labelling and subsequent autoradiography showed the induction of a number of cellular proteins in response to the media additives butyrate and zinc sulphate. These were identified as GRP75, enolase and thioredoxin. The chaperone proteins GRP78, HSP90, GRP94 and HSP70 were not up-regulated under these conditions.
Resumo:
Introduction: Fibrinolyis is one of the first line therapies in high risk pulmonary embolism (PE) according to current guidelines. Previous studies showed that brinolytic therapy with tPA (tissue plasminogen activator, or alteplase) upregulates the concentrations of matrix metalloproteinases (MMPs) and contributes to hemorrhagic transformation after cardioembolic stroke. However, no previous study has described the circulating MMPs levels following fibrinolysis for acute PE. Materials and Methods: We serially measured the circulating levels of MMPs (MMP-9 and MMP-2) and their endogenous inhibitors, the tissue inhibitor of metalloproteinase (TIMP)-1 and TIMP-2 in alteplase and in streptokinase-treated patients with acute PE by gelatin zymography and by enzyme-linked immunosorbent assays, respectively. Results: We found that therapy of PE streptokinase or with alteplase is associated increased pro-MMP-9, but not MMP-2, concentrations for up to 24 hours, whereas no significant changes were found in TIMP-1 or TIMP-2 concentrations. This alteration returned to normal 3 to 5 days after thrombolysis. This is the first study reporting on MMPs alterations following fibrinolysis for acute PE. Conclusions: We found transient increases in circulating pro-MMP-9 levels following fibrinolysis for acute PE. Our findings support the hypothesis that increased MMP-9 levels may underlie the risk of intracerebral hemorrhage or other bleeding complication of thrombolysis for acute PE, and the use of MMP inhibitors may decrease such risk. (C) 2010 Elsevier Ltd. All rights reserved.
Resumo:
Head lice (Pediculus humanus capitis) infestations affect schoolchildren worldwide, creating social, economic and health consequences for families. Problems with self-detection, chronic infestations and classroom transmission are compounded by increasing resistance of the lice to pediculicides. Public health strategies are based on limited research and little is known about transmission dynamics. Mismanagement and transmission in the general community are blamed for control failure. The purpose of this study was to explore community head-lice experience in Brisbane, Australia, and to identify critical factors underlying control failure. A home-based pilot survey used physical examination to verify transmission and treatment patterns which were self-reported by a group of trace-contact families in addition to other unconnected participants. The survey was enlarged to further compare therapy outcomes and suspected risk factors. The findings reinforce those of previous studies - that children attending school and early childhood centres, and subsequently their families, are most at risk of contracting pediculosis capitis, and some may carry lice for years. First-line (pediculicidal) treatment and even additional physical methods of hand-picking and fine-toothed combing usually fail to eradicate lice quickly and completely (overall cure-rate 39 per cent, n = 84 cases). Failures were linked to hair characteristics. Public education alone may not control pediculosis. Accurate diagnosis requires considerable experience; a strong case exists for returning to institutional surveillance.
Resumo:
In the context of electricity markets, transmission pricing is an important tool to achieve an efficient operation of the electricity system. The electricity market is influenced by several factors; however the transmission network management is one of the most important aspects, because the network is a natural monopoly. The transmission tariffs can help to regulate the market, for this reason transmission tariffs must follow strict criteria. This paper presents the following methods to tariff the use of transmission networks by electricity market players: Post-Stamp Method; MW-Mile Method Distribution Factors Methods; Tracing Methodology; Bialek’s Tracing Method and Locational Marginal Price. A nine bus transmission network is used to illustrate the application of the tariff methods.
Resumo:
INTRODUCTION: Vancomycin-resistant enterococci (VRE) can colonize or cause infections in high-risk patients and contaminate the environment. Our objective was to describe theepidemiological investigation of an outbreak of VRE, the interventions made, and their impact on its control. METHODS: We conducted a retrospective, descriptive, non-comparative study by reviewing the charts of patients with a VRE-positive culture in the University Hospital of Campinas State University, comprising 380 beds, 40 of which were in intensive care units (ICUs), who were admitted from February 2008-January 2009. Interventions were divided into educational activity, reviewing the workflow processes, engineering measures, and administrative procedures. RESULTS: There were 150 patients, 139 (92.7%) colonized and 11 (7.3%) infected. Seventy-three percent were cared for in non-ICUs (p = 0.028). Infection was more frequent in patients with a central-line (p = 0.043), mechanical ventilation (p = 0.013), urinary catheter (p = 0.049), or surgical drain (p = 0.049). Vancomycin, metronidazole, ciprofloxacin, and third-generation cephalosporin were previously used by 47 (31.3%), 31 (20.7%), 24 (16%), and 24 (16%) patients, respectively. Death was more frequent in infected (73%) than in colonized (17%) patients (p < 0.001). After the interventions, the attack rate fell from 1.49 to 0.33 (p < 0.001). CONCLUSIONS: Classical risk factors for VRE colonization or infection, e.g., being cared for in an ICU and previous use of vancomycin, were not found in this study. The conjunction of an educational program, strict adhesion to contact precautions, and reinforcement of environmental cleaning were able to prevent the dissemination of VRE.
Resumo:
CdS nanoparticles (NPs) were synthesized using colloidal methods and incorporated within a diureasil hybrid matrix. The surface capping of the CdS NPs by 3-mercaptopropyltrimethoxysilane (MPTMS) and 3-aminopropyltrimethoxysilane (APTMS) organic ligands during the incorporation of the NPs within the hybrid matrix has been investigated. The matrix is based on poly(ethylene oxide)/poly(propylene oxide) chains grafted to a siliceous skeleton through urea bonds and was produced by sol–gel process. Both alkaline and acidic catalysis of the sol–gel reaction were used to evaluate the effect of each organic ligand on the optical properties of the CdS NPs. The hybrid materials were characterized by absorption, steady-state and time-resolved photoluminescence spectroscopy and High Resolution Transmission Electron Microscopy (HR-TEM). The preservation of the optical properties of the CdS NPs within the diureasil hybrids was dependent on the experimental conditions used. Both organic ligands (APTMS and MPTMS) demonstrated to be crucial in avoiding the increase of size distribution and clustering of the NPs within the hybrid matrix. The use of organic ligands was also shown to influence the level of interaction between the hybrid host and the CdS NPs. The CdS NPs showed large Stokes shifts and long average lifetimes, both in colloidal solution and in the xerogels, due to the origin of the PL emission in surface states. The CdS NPs capped with MPTMS have lower PL lifetimes compared to the other xerogel samples but still larger than the CdS NPs in the original colloidal solution. An increase in PL lifetimes of the NPs after their incorporation within the hybrid matrix is related to interaction between the NPs and the hybrid host matrix.
Resumo:
Tese de Doutoramento em Ciência e Engenharia de Polímeros e Compósitos
Resumo:
This article is devoted to the research of VoIP transmission quality over Digital Power Line Carrier channels. Assessment of quality transmission is performed using E-model. Paper considers the possibility of joint using of Digital Power Line carrier equipment with different architecture in one network. As a result of the research, the rule for constructing of multi-segment Digital Power Line Carrier channels was formulated. This rule allows minimizing the transmission delay and saving frequency resources of high voltage Power Line Carrier range.
Resumo:
Magdeburg, Univ., Fak. für Naturwiss., Diss., 2014