Structural geology of the region between Pacoima and Little Tujunga Canyons, San Gabriel Mountains, California

An area of about 25 square miles in the western part of the San Gabriel Mountains was mapped on a scale of 1000 feet to the inch. Special attention was given to the structural geology, particularly the relations between the different systems of faults, of which the San Gabriel fault system and the Sierra Madre fault system are the most important ones. The present distribution and relations of the rocks suggests that the southern block has tilted northward against a more stable mass of old rocks which was raised up during a Pliocene or post-Pliocene orogeny. It is suggested that this northward tilting of the block resulted in the group of thrust faults which comprise the Sierra Madre fault system. It is show that this hypothesis fits the present distribution of the rocks and occupies a logical place in the geologic history of the region as well or better than any other hypothesis previously offered to explain the geology of the region.

Dynamic rupture simulation integrated with earthquake observations

Dynamic rupture simulations are unique in their contributions to the study of earthquake physics. The current rapid development of dynamic rupture simulations poses several new questions: Do the simulations reflect the real world? Do the simulations have predictive power? Which one should we believe when the simulations disagree? This thesis illustrates how integration with observations can help address these questions and reduce the effects of non-uniqueness of both dynamic rupture simulations and kinematic inversion problems. Dynamic rupture simulations with observational constraints can effectively identify non-physical features inferred from observations. Moreover, the integrative technique can also provide more physical insights into the mechanisms of earthquakes. This thesis demonstrates two examples of such kinds of integration: dynamic rupture simulations of the M_w 9.0 2011 Tohoku-Oki earthquake and of earthquake ruptures in damaged fault zones:

(1) We develop simulations of the Tohoku-Oki earthquake based on a variety of observations and minimum assumptions of model parameters. The simulations provide realistic estimations of stress drop and fracture energy of the region and explain the physical mechanisms of high-frequency radiation in the deep region. We also find that the overridding subduction wedge contributes significantly to the up-dip rupture propagation and large final slip in the shallow region. Such findings are also applicable to other megathrust earthquakes.

(2) Damaged fault zones are usually found around natural faults, but their effects on earthquake ruptures have been largely unknown. We simulate earthquake ruptures in damaged fault zones with material properties constrained by seismic and geological observations. We show that reflected waves in fault zones are effective at generating pulse-like ruptures and head waves tend to accelerate and decelerate rupture speeds. These mechanisms are robust in natural fault zones with large attenuation and off-fault plasticity. Moreover, earthquakes in damaged fault zones can propagate at super-Rayleigh speeds that are unstable in homogeneous media. Supershear transitions in fault zones do not require large fault stresses. In the end, we present observations in the Big Bear region, where variability of rupture speeds of small earthquakes correlates with the laterally variable materials in a damaged fault zone.

Análisis de la influencia de la orientación de las fibras metálicas en la resistencia de la matriz de hormigón de acuerdo al Ensayo Barcelona

[ES]El objetivo de este trabajo de fin de grado es analizar la influencia que tiene la cuantía y orientación de fibras metálicas presentes en el interior de probetas de hormigón autocompactante y cuyo objetivo es reforzar y aumentar la resistencia a tracción de este material. Se expondrán las propiedades que combina el HACRFA gracias a la autocompactación del hormigón y la inclusión de fibras en su interior y los beneficios que este nuevo material aporta. Por otro lado, se tratara de situar este estudio en un contexto, analizando a la vez cuál es el alcance y los objetivos más importantes que se han tenido en cuenta. A continuación, y a modo de complementación de su contexto, este trabajo tiene un estado del arte, en el que se mencionarán métodos y ensayos necesarios para llegar a un resultado que permita predecir cuál será la resistencia del material, y por tanto su tenacidad o capacidad de absorber energía, sin necesidad de emplear más que un método fácil y rápido, obviando el resto de ensayos destructivos utilizados en este trabajo. Para tal fin, se establece una metodología que, gracias a ensayos de laboratorio, permita establecer una relación entre el método sencillo que se ha mencionado, el método inductivo, y un resultado teórico de la tenacidad que presenta el HACRFA. Se observará cómo la desviación entre los ensayos experimentales y los resultados teóricos obtenidos es prácticamente nula, despreciando situaciones en las que se presenten comportamientos muy diferentes debido a fallos durante los ensayos.

Arquitetura crustal da bacia de Almada no contexto das bacias da margem lesste da América do Sul

A Bacia de Almada, localizada no estado da Bahia, compartilha características similares com as outras bacias da margem leste do Brasil, quando é analisada segundo aspectos como os processos sedimentares e o regime de esforço dominante durante a sua formação. Observa-se uma diferença marcante em relação as outras bacias quando é analisada sob a ótica da composição da crosta transicional, uma vez que não se registra atividade vulcânica durante a fase rifte. A aquisição de um extenso levantamento sísmico 3D, com cabos de 6 km de comprimento e 9.2 segundos de tempo de registro (tempo sísmico duplo), resultaram em imagens sísmicas de boa qualidade das estruturas profundas do rifte. Adicionalmente, estudos de modelagem gravimétrica foram integrados com a análise sísmica para corroborar o modelo geológico. A Bacia de Almada é parte dos sistemas de rifte continentais, desenvolvidos durante o Berriasiano até o Aptiano, que antecederam a quebra do continente do Gondwana, evoluindo posteriormente para uma margem passiva divergente. O processo do rifteamento desenvolveu cinco sub-bacias de orientação NNE-SSO, desde posições terrestres até marinhas profundas, produzindo um arcabouço estrutural complexo. Os perfis da sísmica profunda mostram o afinamento progressivo da crosta continental até espessuras da ordem de 5 km, abaixo da sub-bacia mais oriental, com fatores de estiramento crustal próximo a 7 antes do desenvolvimento de crosta oceânica propriamente dita. As imagens sísmicas de boa qualidade permitem também o reconhecimento de sistemas de falhas lístricas que se iniciam na crosta superior, evoluem atravessando a crosta e conectando as sub-bacias para finalizar em um descolamento horizontal na crosta inferior estratificada. Adicionalmente, a bacia apresenta um perfil assimétrico, compatível com mecanismos de cisalhamento simples. As margens vulcânicas (VM) e não vulcânicas (NVM), são os extremos da análise composicional das margens divergentes continentais. Na Bacia de Almada não se reconhecem os elementos arquiteturais típicos das VM, tais como são as grandes províncias ígneas, caracterizadas por cunhas de refletores que mergulham em direção ao mar e por intenso vulcanismo pré- e sin-rifte nas bacias. Embora a margem divergente do Atlântico Sul seja interpretada tradicionalmente como vulcânica, o segmento do rifte ao sul do Estado da Bahia apresenta características não-vulcânicas, devido à ausência destes elementos arquiteturais e aos resultados obtidos nas perfurações geológicas que eventualmente alcançam a seqüência rifte e embasamento. Regionalmente a margem divergente sul-americana é majoritariamente vulcânica, embora a abundância e a influência do magmatísmo contemporâneo ao rifte seja muito variável. Ao longo da margem continental, desde a Bacia Austral no sul da Argentina, até a Bacia de Pernambuco no nordeste do Brasil, podem ser reconhecidos segmentos de caráter vulcânico forte, médio e não vulcânico. Nos exemplos clássicos de margens não vulcânicas, como a margem da Ibéria, a crosta transicional é altamente afinada podendo apresentar evidências de exumação de manto. Na Bacia de Almada, a crosta transicional apresenta importante estiramento embora não haja evidências concretas de exumação de manto. Os mecanismos responsáveis pela geração e intrusão dos grandes volumes de magma registrados nas margens divergentes são ainda sujeitos a intenso debate. Ao longo da margem divergente sul-americana há evidências da presença dos mecanismos genéticos de estiramento litosférico e impacto de plumas. Alternativamente estes dois mecanismos parecem ter tido um papel importante na evolução tectônica da margem sudeste e sul, diferenciando-as da margem continental onde foi implantada a Bacia de Almada.

Structural and clumped-isotope constraints on the mechanisms of displacement along low-angle detachments

Despite years of research on low-angle detachments, much about them remains enigmatic. This thesis addresses some of the uncertainty regarding two particular detachments, the Mormon Peak detachment in Nevada and the Heart Mountain detachment in Wyoming and Montana.

Constraints on the geometry and kinematics of emplacement of the Mormon Peak detachment are provided by detailed geologic mapping of the Meadow Valley Mountains, along with an analysis of structural data within the allochthon in the Mormon Mountains. Identifiable structures well suited to constrain the kinematics of the detachment include a newly mapped, Sevier-age monoclinal flexure in the hanging wall of the detachment. This flexure, including the syncline at its base and the anticline at its top, can be readily matched to the base and top of the frontal Sevier thrust ramp, which is exposed in the footwall of the detachment to the east in the Mormon Mountains and Tule Springs Hills. The ~12 km of offset of these structural markers precludes the radial sliding hypothesis for emplacement of the allochthon.

The role of fluids in the slip along faults is a widely investigated topic, but the use of carbonate clumped-isotope thermometry to investigate these fluids is new. Faults rocks from within ~1 m of the Mormon Peak detachment, including veins, breccias, gouges, and host rocks, were analyzed for carbon, oxygen, and clumped-isotope measurements. The data indicate that much of the carbonate breccia and gouge material along the detachment is comminuted host rock, as expected. Measurements in vein material indicate that the fluid system is dominated by meteoric water, whose temperature indicates circulation to substantial depths (c. 4 km) in the upper crust near the fault zone.

Slip along the subhorizontal Heart Mountain detachment is particularly enigmatic, and many different mechanisms for failure have been proposed, predominantly involving catastrophic failure. Textural evidence of multiple slip events is abundant, and include multiple brecciation events and cross-cutting clastic dikes. Footwall deformation is observed in numerous exposures of the detachment. Stylolitic surfaces and alteration textures within and around “banded grains” previously interpreted to be an indicator of high-temperature fluidization along the fault suggest their formation instead via low-temperature dissolution and alteration processes. There is abundant textural evidence of the significant role of fluids along the detachment via pressure solution. The process of pressure solution creep may be responsible for enabling multiple slip events on the low-angle detachment, via a local rotation of the stress field.

Clumped-isotope thermometry of fault rocks associated with the Heart Mountain detachment indicates that despite its location on the flanks of a volcano that was active during slip, the majority of carbonate along the Heart Mountain detachment does not record significant heating above ambient temperatures (c. 40-70°C). Instead, cold meteoric fluids infiltrated the detachment breccia, and carbonate precipitated under ambient temperatures controlled by structural depth. Locally, fault gouge does preserve hot temperatures (>200°C), as is observed in both the Mormon Peak detachment and Heart Mountain detachment areas. Samples with very hot temperatures attributable to frictional shear heating are present but rare. They appear to be best preserved in hanging wall structures related to the detachment, rather than along the main detachment.

Evidence is presented for the prevalence of relatively cold, meteoric fluids along both shallow crustal detachments studied, and for protracted histories of slip along both detachments. Frictional heating is evident from both areas, but is a minor component of the preserved fault rock record. Pressure solution is evident, and might play a role in initiating slip on the Heart Mountain fault, and possibly other low-angle detachments.

Caracterização geológica da ocorrência de óleo na Formação Rio Bonito associada a um modelo não convencional de geração

O trabalho teve como escopo a caracterização geológica, em termos estruturais e estratigráficos, do sistema petrolífero responsável pela ocorrência de óleos encontrados na Formação Rio Bonito, na região carbonífera de Santa Catarina. Atualmente, especula-se que a assinatura geoquímica destes óleos relaciona-se à Formação Irati associado a um modelo não convencional de geração, vinculando a maturação térmica à intrusão de diabásio, devido a um soterramento insuficiente da rocha geradora. Como a Formação Irati encontra-se posicionada estratigraficamente acima da Formação Rio Bonito, o sistema está associado a um forte controle estrutural para o modelo de migração. A preparação de um mapa geológico integrado para a área de estudo envolvendo dados geológicos de campo, dados aeromagnetométricos e informações de furos de sondagem permitiu um entendimento mais aprofundado do arcabouço tectônico-estratigráfico da região. Seções geológicas mostraram a presença de falhas de grandes rejeitos que promoveram um sistema de Horsts e Grabens relacionados às NE-SW e secundariamente a falhas E-W, que permitiram a colocação da Formação Irati em contato lateral ou em um posicionamento abaixo da Formação Rio Bonito. A partir das seções cronoestratigráficas elaboradas foi possível reconhecer prováveis selos, trapas estratigráficos e estruturais, associados ao sistema petrolífero Irati-Rio Bonito. A análise geoquímica (isótopos e biomarcadores) dos óleos coletados na Formação Rio Bonito apontaram que os mesmos estão associadas aos folhelhos do Membro Assistência da Formação Irati, por possuírem uma razão pristano/fitano menor que 1, gamacerano, e a presença de isoprenóides pentametileicosano (i-25) e esqualano (i-30). A partir de análises geoquímicas realizadas em extratos orgânicos extraídos de folhelhos da Formação Irati intrudidos por diabásio, obteve-se valores da relação entre biomarcadores correspondentes e valores de Ro que indicam que foi alcançado o pico de geração de óleo. Contudo, não há registro na área de estudo de um soterramento suficiente que favorecesse essa situação, levando-nos, assim, a acreditar em um modelo de geração não convencional, por meio da intrusão de diabásio nas rochas geradoras. O arcabouço estrutural e os óleos estudados na região sugerem um processo migratório de sudoeste para o nordeste, ao longo de um sistema de falhas NE-SW, encontradas na região, que foram geradas anteriormente ou concomitantemente ao derrame basáltico associado à Formação Serra Geral.

I. The Superstition Hills, California, earthquakes of 24 November 1987. II. Three-dimensional velocity structure of southern California.

Part 1 of this thesis is about the 24 November, 1987, Superstition Hills earthquakes. The Superstition Hills earthquakes occurred in the western Imperial Valley in southern California. The earthquakes took place on a conjugate fault system consisting of the northwest-striking right-lateral Superstition Hills fault and a previously unknown Elmore Ranch fault, a northeast-striking left-lateral structure defined by surface rupture and a lineation of hypocenters. The earthquake sequence consisted of foreshocks, the M_s 6.2 first main shock, and aftershocks on the Elmore Ranch fault followed by the M_s 6.6 second main shock and aftershocks on the Superstition Hills fault. There was dramatic surface rupture along the Superstition Hills fault in three segments: the northern segment, the southern segment, and the Wienert fault.

In Chapter 2, M_L≥4.0 earthquakes from 1945 to 1971 that have Caltech catalog locations near the 1987 sequence are relocated. It is found that none of the relocated earthquakes occur on the southern segment of the Superstition Hills fault and many occur at the intersection of the Superstition Hills and Elmore Ranch faults. Also, some other northeast-striking faults may have been active during that time.

Chapter 3 discusses the Superstition Hills earthquake sequence using data from the Caltech-U.S.G.S. southern California seismic array. The earthquakes are relocated and their distribution correlated to the type and arrangement of the basement rocks. The larger earthquakes occur only where continental crystalline basement rocks are present. The northern segment of the Superstition Hills fault has more aftershocks than the southern segment.

An inversion of long period teleseismic data of the second mainshock of the 1987 sequence, along the Superstition Hills fault, is done in Chapter 4. Most of the long period seismic energy seen teleseismically is radiated from the southern segment of the Superstition Hills fault. The fault dip is near vertical along the northern segment of the fault and steeply southwest dipping along the southern segment of the fault.

Chapter 5 is a field study of slip and afterslip measurements made along the Superstition Hills fault following the second mainshock. Slip and afterslip measurements were started only two hours after the earthquake. In some locations, afterslip more than doubled the coseismic slip. The northern and southern segments of the Superstition Hills fault differ in the proportion of coseismic and postseismic slip to the total slip.

The northern segment of the Superstition Hills fault had more aftershocks, more historic earthquakes, released less teleseismic energy, and had a smaller proportion of afterslip to total slip than the southern segment. The boundary between the two segments lies at a step in the basement that separates a deeper metasedimentary basement to the south from a shallower crystalline basement to the north.

Part 2 of the thesis deals with the three-dimensional velocity structure of southern California. In Chapter 7, an a priori three-dimensional crustal velocity model is constructed by partitioning southern California into geologic provinces, with each province having a consistent one-dimensional velocity structure. The one-dimensional velocity structures of each region were then assembled into a three-dimensional model. The three-dimension model was calibrated by forward modeling of explosion travel times.

In Chapter 8, the three-dimensional velocity model is used to locate earthquakes. For about 1000 earthquakes relocated in the Los Angeles basin, the three-dimensional model has a variance of the the travel time residuals 47 per cent less than the catalog locations found using a standard one-dimensional velocity model. Other than the 1987 Whittier earthquake sequence, little correspondence is seen between these earthquake locations and elements of a recent structural cross section of the Los Angeles basin. The Whittier sequence involved rupture of a north dipping thrust fault bounded on at least one side by a strike-slip fault. The 1988 Pasadena earthquake was deep left-lateral event on the Raymond fault. The 1989 Montebello earthquake was a thrust event on a structure similar to that on which the Whittier earthquake occurred. The 1989 Malibu earthquake was a thrust or oblique slip event adjacent to the 1979 Malibu earthquake.

At least two of the largest recent thrust earthquakes (San Fernando and Whittier) in the Los Angeles basin have had the extent of their thrust plane ruptures limited by strike-slip faults. This suggests that the buried thrust faults underlying the Los Angeles basin are segmented by strike-slip faults.

Earthquake and explosion travel times are inverted for the three-dimensional velocity structure of southern California in Chapter 9. The inversion reduced the variance of the travel time residuals by 47 per cent compared to the starting model, a reparameterized version of the forward model of Chapter 7. The Los Angeles basin is well resolved, with seismically slow sediments atop a crust of granitic velocities. Moho depth is between 26 and 32 km.

Geology of the Pacoima Area, Los Angeles County, California

The Pacoima area is located on an isolated hill in the northeast section of the San Fernando, the northeast portion of the Pacoima Quadrangle, Los Angeles County, California. Within it are exposed more than 2300 feet of Tertiary rocks, which comprise three units of Middle Miocene (?) age, and approximately 950 feet of Jurassic (?) granite basement. The formations are characterized by their mode of occurrence, marine and terrestial origin, diverse lithology, and structural features.

The basement complex is composed of intrusive granite, small masses of granodiorite and a granodiorite gneiss with the development of schistosity in sections. During the long period of erosion of the metamorphics, the granitic rocks were exposed and may have provided clastic constituents for the overlying formations.

As a result of rapid sedimentation in a transitional environment, the Middle Miocene Twin Peaks formation was laid down unconformably on the granite. This formation is essentially a large thinning bed of gray to buff pebble and cobble conglomerate grading to coarse yellow sandstone. The contact of conglomerate and granite is characterized by its faulted and depositional nature.

Beds of extrusive andesite, basalt porphyry, compact vesicular amygdaloidal basalts, andesite breccia, interbedded feldspathic sands and clays of terrestial origin, and mudflow breccia comprise the Pacoima formation which overlies the Twin Peaks formation unconformably. A transgressing shallow sea accompanied settling of the region and initiated deposition of fine clastic sediments.

The marine Topanga (?) formation is composed of brown to gray coarse sandstone grading into interbedded buff sandstones and gray shales. Intrusions of rhyolitedacite and ash beds mark continued but sporatic volcanism during this period.

The area mapped represents an arch in the Tertiary sediments. Forces that produced the uplift of the granite structural high created stresses that were relieved by jointing and faulting. Vertical and horizontal movement along these faults has displaced beds, offset contacts and complicated their structure. Uplift and erosion have exposed the present sequence of beds which dip gently to the northeast. The isolated hill is believed to be in an early stage of maturity.

The Pacoima Area

The Pacoima area consists of Miocene (sediments and basalts) rocks underlain by a quartz diorite basement complex of Jurassic age. The stratigranhic units range from 25 feet to more than 600 feet in thickness. The lower sediments are arkosic land- laid deposits while the Modelo formation, shallow marine in origin, consists of thinly bedded sandstones, shales, volcanic ash and calcareous members. An andesitic mass, possibly a volcanic plug, outcrops near the summit of one of the hills.

An anticline, and possibly an associated syncline, has been developed by compressional folding. Small scale contortion is locally exposed. Regional dip is northward, decreasing from south to north in the area. Faulting is common, most faults trending nearly north-south. Movement along these faults ranges from a few feet to several hundred feet.

There are no important mineral deposits in the area. Quarrying of the basement rocks has been abandoned.

A Geologic Report on the Pacoima Area

The region treated in the following report is a small area of about one square mile near Pacoima, California. It consists of a group of small hills that that form the western abutment of the Hansen Dam. It is underlain by a section of intrusives, sediments, and extrusives, which may be subdivided into four groups.

The oldest rocks form the Dimebere complex of Jurassic (?) plutonic rocks, pegmatites, and schists. Lying uncomformably on this is a series of alternating terrestrial sandstones and bassalts of Tertiary age. These are unconformably overlain in turn by the Hansen Dam formation, a series of marine shales and sandstone correlated with the Temblor by the fossil contact. Finally into these strata was intruded the Munglish andesite.

These strata form a shallow, plunging anticline, whose axis trends slightly east of north and lies in the center of the hills. The unconformities have been offset in several places by a series of faults apparently related to the anticline.

A complete outline of the geologic history is included in the report.

Observation and interpretation of tectonic strain release mechanisms

In four chapters various aspects of earthquake source are studied.

Chapter I

Surface displacements that followed the Parkfield, 1966, earthquakes were measured for two years with six small-scale geodetic networks straddling the fault trace. The logarithmic rate and the periodic nature of the creep displacement recorded on a strain meter made it possible to predict creep episodes on the San Andreas fault. Some individual earthquakes were related directly to surface displacement, while in general, slow creep and aftershock activity were found to occur independently. The Parkfield earthquake is interpreted as a buried dislocation.

Chapter II

The source parameters of earthquakes between magnitude 1 and 6 were studied using field observations, fault plane solutions, and surface wave and S-wave spectral analysis. The seismic moment, M_O, was found to be related to local magnitude, M_L, by log M_O = 1.7 M_L + 15.1. The source length vs magnitude relation for the San Andreas system found to be: M_L = 1.9 log L - 6.7. The surface wave envelope parameter AR gives the moment according to log M_O = log AR₃₀₀ + 30.1, and the stress drop, τ, was found to be related to the magnitude by τ = 0.54 M - 2.58. The relation between surface wave magnitude M_S and M_L is proposed to be M_S = 1.7 M_L - 4.1. It is proposed to estimate the relative stress level (and possibly the strength) of a source-region by the amplitude ratio of high-frequency to low-frequency waves. An apparent stress map for Southern California is presented.

Chapter III

Seismic triggering and seismic shaking are proposed as two closely related mechanisms of strain release which explain observations of the character of the P wave generated by the Alaskan earthquake of 1964, and distant fault slippage observed after the Borrego Mountain, California earthquake of 1968. The Alaska, 1964, earthquake is shown to be adequately described as a series of individual rupture events. The first of these events had a body wave magnitude of 6.6 and is considered to have initiated or triggered the whole sequence. The propagation velocity of the disturbance is estimated to be 3.5 km/sec. On the basis of circumstantial evidence it is proposed that the Borrego Mountain, 1968, earthquake caused release of tectonic strain along three active faults at distances of 45 to 75 km from the epicenter. It is suggested that this mechanism of strain release is best described as "seismic shaking."

Chapter IV

The changes of apparent stress with depth are studied in the South American deep seismic zone. For shallow earthquakes the apparent stress is 20 bars on the average, the same as for earthquakes in the Aleutians and on Oceanic Ridges. At depths between 50 and 150 km the apparent stresses are relatively high, approximately 380 bars, and around 600 km depth they are again near 20 bars. The seismic efficiency is estimated to be 0.1. This suggests that the true stress is obtained by multiplying the apparent stress by ten. The variation of apparent stress with depth is explained in terms of the hypothesis of ocean floor consumption.

Levantamento e estudo das ocorrências de grafita do Distrito Grafitífero Aracoiába-Baturité, CE

O Distrito Grafitífero Aracoiába-Baturité apresenta depósitos do tipo gnaisse grafitoso (minério disseminado) e veio (minério maciço) com diferentes origens genéticas e com características físicas e ambientes geológicos de formação próprios. O minério tipo gnaisse grafitoso é de origem sedimentar, singenético, com teores de 1,5 a 8% de C, que se distribuem ao longo de duas extensas faixas paralelas, hospedadas na Subunidade Baturité, que constitui um importante metalotecto regional. A associação de grafita metamórfica disseminada em metassedimentos da Sequência Acarápe constitui um geoindicador de antiga bacia sedimentar neoproterozóica e, também, pode ser considerado como zona de geosutura resultante do subsequente fechamento de um oceano primitivo. As rochas desta subunidade correspondem na paleogeografia da Sequência Acarápe aos fácies de sopé de talude e de planície abissal. O minério tipo veio (fluido depositado) é epigenético e, com teores entre 20% e 70% de C, forma corpos tabulares e bolsões, controlados em escala local por estruturas de alívio (falhas, fraturas, zonas de contato, eixos de dobras etc.) que permitiram a percolação de soluções penumatolíticas relacionadas ao corpo plutônico de Pedra Aguda. As variações dos valores das relações entre isótopos estáveis de carbono (δ13C) na grafita do minério disseminado são de -26,72 a -23,52 e do minério maciço de -27,03 a -20,83, revelando sinal de atividades biológicas (bioassinaturas) e permitem afirmar que a grafita das amostras acima são derivadas de matéria orgânica. Foram apresentados os principais guias de prospecção para grafita e testados os seguintes métodos geofísicos: Eletro-Resistividade; GPR - Ground Penetrating Radar; Magnetometria; VLF (Very Low Frequency); e Polarização Induzida Espectral (IPS) / Resistividade (ER). A conjugação dos métodos de Polarização Induzida Espectral (IPS) e Eletro Resistividade (ER) foi o que demonstrou a melhor eficiência. Com relação à determinação do teor de carbono por termogravimetria (ATG), que é o método mais utilizado para este elemento. Verificou-se, que as faixas de queima atribuídas ao carbono no minério do Distrito de Aracoiába-Baturité (340 a 570C e de 570 a 1050C) eram diferentes das faixas do minério de Minas Gerais (350C a 650C e 650C a 1.050C). Esta constatação indica a necessidade de se determinar previamente as faixas de temperatura para cada região pesquisada.

Transparência e participação social da gestão pública: análise crítica das propostas apresentadas na 1 Conferência Nacional sobre Transparência Pública.

Este estudo visa a contribuir para a reflexão sobre transparência e participação social da gestão pública brasileira, realizando uma análise crítica sobre as propostas elaboradas pelos participantes da 1 Conferência Nacional sobre Transparência e Controle Social no seu eixo 1. Por meio da análise, buscou-se identificar se as propostas elaboradas pela sociedade durante a 1 Consocial contribuíram para o exercício do controle social com base na transparência e no acesso a informação. A metodologia utilizada foi a pesquisa exploratória e a pesquisa participante. O pesquisador fez parte como membro integrante do grupo analisado, utilizando a participação em conferências nos fóruns de discussão para a formulação de propostas. A participação se deu na etapa municipal - nos municípios de Macaé e Rio de Janeiro -, na conferência regional Niterói-Mangaratiba; na estadual do Rio de Janeiro, na conferência livre do CRC RJ e na conferência virtual, com a descrição das etapas preparatórias. Por meio da análise das propostas priorizadas na última etapa da 1 Consocial, observou-se a necessidade de uma maior divulgação das informações referente à administração pública, à exteriorização das competências dos instrumentos de participação social e à capacitação do cidadão para o exercício da participação social. Algumas falhas foram detectadas na formulação das propostas, como o desconhecimento dos participantes a respeito das leis existentes sobre transparência e das atribuições das ferramentas de participação social. Constatou-se a necessidade de capacitar o cidadão para esse tipo de conferência, realizando seminários, reuniões, palestras explicativas e eventos culturais sobre o tema Transparência e Controle Social. Outro ponto a ser trabalhado para alcançar uma participação maior da sociedade nas questões governamentais consiste no ensino das crianças e jovens sobre a importância de se exigir transparência dos dados públicos e a busca por espaço nos instrumentos de participação. A Lei da transparência atenderá seus objetivos, na medida em que o cidadão tiver a consciência do seu papel primordial na busca e no acompanhamento da informação.

Imaging the earth with ambient noise and earthquakes

In this thesis, I develop the velocity and structure models for the Los Angeles Basin and Southern Peru. The ultimate goal is to better understand the geological processes involved in the basin and subduction zone dynamics. The results are obtained from seismic interferometry using ambient noise and receiver functions using earthquake- generated waves. Some unusual signals specific to the local structures are also studied. The main findings are summarized as follows:

(1) Los Angeles Basin

The shear wave velocities range from 0.5 to 3.0 km/s in the sediments, with lateral gradients at the Newport-Inglewood, Compton-Los Alamitos, and Whittier Faults. The basin is a maximum of 8 km deep along the profile, and the Moho rises to a depth of 17 km under the basin. The basin has a stretch factor of 2.6 in the center decreasing to 1.3 at the edges, and is in approximate isostatic equilibrium. This "high-density" (~1 km spacing) "short-duration" (~1.5 month) experiment may serve as a prototype experiment that will allow basins to be covered by this type of low-cost survey.

(2) Peruvian subduction zone

Two prominent mid-crust structures are revealed in the 70 km thick crust under the Central Andes: a low-velocity zone interpreted as partially molten rocks beneath the Western Cordillera – Altiplano Plateau, and the underthrusting Brazilian Shield beneath the Eastern Cordillera. The low-velocity zone is oblique to the present trench, and possibly indicates the location of the volcanic arcs formed during the steepening of the Oligocene flat slab beneath the Altiplano Plateau.

The Nazca slab changes from normal dipping (~25 degrees) subduction in the southeast to flat subduction in the northwest of the study area. In the flat subduction regime, the slab subducts to ~100 km depth and then remains flat for ~300 km distance before it resumes a normal dipping geometry. The flat part closely follows the topography of the continental Moho above, indicating a strong suction force between the slab and the overriding plate. A high-velocity mantle wedge exists above the western half of the flat slab, which indicates the lack of melting and thus explains the cessation of the volcanism above. The velocity turns to normal values before the slab steepens again, indicating possible resumption of dehydration and ecologitization.

(3) Some unusual signals

Strong higher-mode Rayleigh waves due to the basin structure are observed in the periods less than 5 s. The particle motions provide a good test for distinguishing between the fundamental and higher mode. The precursor and coda waves relative to the interstation Rayleigh waves are observed, and modeled with a strong scatterer located in the active volcanic area in Southern Peru. In contrast with the usual receiver function analysis, multiples are extensively involved in this thesis. In the LA Basin, a good image is only from PpPs multiples, while in Peru, PpPp multiples contribute significantly to the final results.

A high-speed image sensing technique with adjustable frame rate based on an ordinary CCD

In the sinusoidal phase modulating interferometer technique, the high-speed CCD is necessary to detect the interference signals. The reason of ordinary CCD's low frame rate was analyzed, and a novel high-speed image sensing technique with adjustable frame rate based on ail ordinary CCD was proposed. And the principle of the image sensor was analyzed. When the maximum frequency and channel bandwidth were constant, a custom high-speed sensor was designed by using the ordinary CCD under the control of the special driving circuit. The frame rate of the ordinary CCD has been enhanced by controlling the number of pixels of every frame; therefore, the ordinary of CCD can be used as the high frame rate image sensor with small amount of pixels. The multi-output high-speed image sensor has the deficiencies of low accuracy, and high cost, while the high-speed image senor with small number of pixels by using this technique can overcome theses faults. The light intensity varying with time was measured by using the image sensor. The frame rate was LIP to 1600 frame per second (f/s), and the size of every frame and the frame rate were adjustable. The correlation coefficient between the measurement result and the standard values were higher than 0.98026, and the relative error was lower than 0.53%. The experimental results show that this sensor is fit to the measurements of sinusoidal phase modulating interferometer technique. (c) 2007 Elsevier GmbH. All rights reserved.