856 resultados para subtropical coastal wetlands
Resumo:
The evaporite unit (the Lécera Formation), which was formed at the Triassic¿Liassic boundary in the Aragonian Branch of the Iberian Chain, was studied at the 01 Alacón borehole (Alacón village, Teruel province), where it is mainly constituted by a thick (>e and reflect deeper water settings, whereas in the upper part they correspond to shallower water settings. The evaporite sedimentation mainly occurred in a subsiding coastal basin of the salina or lagoon type. In this setting, the subaqueous precipitation of the carbonate and gypsum lithofacies was followed, in each cycle, by the interstitial growth of anhydrite in exposed conditions. As a whole, the evaporite succession reflects an infilling process. The conversion into anhydrite of the selenitic gypsum -probably also of the rest of depositional gypsum lithofaciesstarted under synsedimentary conditions and followed during shallow to moderate burial diagenesis.
Resumo:
Two facies characterize the Silurian and lower Devonian of the Catalonian Coastal Ranges, namely euxinic and pelagic carbonate facies. The first, is represented by black shales in which the atavus, acinaces, cyphus, triangulatus, convolutus, ?sedgwickii, ellesae and tumescens zones have been recognized. The graptolite succesion is far from complete on present evidence, but this is probably due to unfavorable environmental (taphonomic) conditions. This facies is similar to that prevailing throughout the Iberian massif and most of western Europe. The pelagic carbonate facies is peculiar to the Pridoli and lower Devonian and corresponds to the facies type prevailing in the Western Mediterranean Area. It is characterized by the nodular texture of limestones and marls, with all gradations between nodular limestones, marls and slates. Massive nodular limestone, occur in the lower part of the sequence (La Creu Formation) while the alternation of limestones, marls and slates charaterizes the upper part (Olorda Formation). Orthoconic cephalopds, crinoids, conodonts and tentaculites are the most common fossils present; graptolites occur in some shale horizons in the lower part of the Olorda Formation. These graptolites give strong indications of the uniformis and hercynicus zones (Lochkovian). The uppermost part of the sequence has not provided any graptolite fauna, but according their dacrioconarid fauna it corresponds probably to the Pragian.
Resumo:
The Paleozoic stratigraphic succession in the Catalonian Coastal Ranges spans the interval from Cambrian(?) to Carboniferous, with only one break, separating the pre-Carboniferous part of the sequence from the Carboniferous. The oldest rocks exposed form a sequence of schists, fine grained sandstones, gneisses (laminar pre-Hercynian intrusions), marbles, orto- and para-amphibolites and calcsilicate rocks. comparison with other localities iuggests an Early Cambrian age (or perhaps in part older). Upwards the sequence becomes more monotonous andconsists only of schists (or slates where themetamorphic grade is lower) and thin fine-grained sandstone layers (Cambrian-Ordovician). Still higher in the sequence, an altemation of greywackes and slates is found, with interlayered mud-supported conglomerates at its lower part and acid volcanic rocks which occur throughout the whole sequence. This part of the sequence has provided the oldest faunas known in the Catalonian Coastal Ranges, which indicate the Caradoc. Finally, in its uppermost part, the Ordovician sequence contains some thin limestone layers that contain Ashgill faunas. The Silurian, from Llandovery to Lower Ludlow, consists of black graptolitic shales with dolerite sills, whilst the upper Ludlow, Pridolian and Devonian consist of nodular limestones and marls withpelagic and hemipelagic faunas. The youngest Devonian faunas found correspond in general to the Emsian. The existence of a gap at this point of the sequence suggests the possibility that part of the Devonian could have been eroded. The Carboniferous is characterized by a thick culm sequence (Visean to Westphalian?), resting on thin chert and limestone layers (Tournaisian and Visean). A comparison with neighbouring areas shows a similarity regarding succession and facies with other Paleozoic massifs around the Western Mediterranean.
Resumo:
In the Catalonian Coastal Ranges, Paleozoic sedimentary and meta-sedimentary rocks crop out in severa1 areas, intruded by late tectonic Hercynian granitoids and separated by Mesozoic and Tertiary cover sediments. Large structures are often difficult to recognize, although a general east-west trend can be observed on the geological map. Deformation was accompanied by the development of cleavages and regional metamorphism. Green-schist facies rocks are prominent throughout the Ranges, while amphibolite facies are restricted to small areas. In low-grade areas, the main deformation phase generated south-facing folds with an axial plane cleavage (slaty cleavage in metapelitic rocks). The intersection lineation (Ss/Sl) and the axes of minor folds trend cast-west, as do all mapable structures. Late deformations generated coarse crenulations, small chevrons and kink-bands, all intersecting the slaty cleavage at high angles. In medium- to high-grade areas no major folds have been observed. In these areas, the main foliation is a schistosity and is often folded, giving centimetric to decimetric, nearly isoclinal intrafolial folds. In schists, these folds aremuchmore common than inother lithologies, and can be associated with a crenulation cleavage. All these planar structures in high-grade rocks are roughly parallel. The late Hercynian deformational events, which gave rise to the crenulations and small chevrons, also produced large (often kilometric) open folds which fold the slaty cleavage and schistosity. As aconsequence, alternating belts with opposite dip (north and south) of the main foliation were formed. With respect to the Hercynian orogenic belt, the Paleozoic outcrops of the Catalonian Coastal Ranges are located within the northern branch of the Ibero-Armorican arc, and have a relatively frontal position within the belt. The Carboniferous of the Priorat-Prades area, together with other outcrops in the Castellón Province, the Montalbán massif (Iberian Chain) and the Cantabrian zone (specially the Pisuerga-Carrión Province) probably form part of a wide area of foreland Carboniferous deposition placed at the core of the arc.
Resumo:
We used high-resolution swath-bathymetry data to characterise the morphology of the abandoned subaqueous Sol de Riu delta lobe in the Ebro Delta, Western Mediterranean Sea. This study aims to assess the influence of an abandoned delta lobe on present-day coastal dynamics in a micro-tidal environment. Detailed mapping of the relict Sol de Riu lobe also showed a set of bedforms interpreted as footprints of human activities: seasonal V-shaped depressions on the middle shoreface due to boat anchoring and old trawling marks between 16 and 18 m water depth. Estimations of the mobility of bottom sediment showed that the shallowest shoreface (i.e. less than 7 m depth) is the most dynamic part of the relict lobe, while the middle shoreface experienced significant morphological changes since the lobe was abandoned. The deepest shoreface (i.e. water depth in excess of 15 m), which corresponds to the front of the lobe, is defined by a very small potential for morphological change. Simulations showed that while the relict lobe does not significantly affect the typical short period waves (Tp ≈4 s) in the study area, it does interfere with the most energetic wave conditions (Tp ≥ 7 s) acting as a shoal leading to the concentration of wave energy along the shoreline northwest of the lobe. The consequence of such modification of the high-energy wave propagation pattern by the relict lobe is an alteration of the wave-induced littoral sediment dynamics with respect to a situation without the lobe.
Resumo:
The aim of this study was to evaluate abundance, biomass and diversity of earthworms in the southern coast region of the Mata Atlântica biodiversity hotspot. A total of 51 study sites in pastures, banana monocultures, mixed agroforestry systems, secondary forests in succession and old-growth forests near the coast of Paraná, Brazil, were evaluated. Each site was sampled once. Species richness of the earthworms was generally low and varied little between sites. At all sites except for one, the peregrine species Pontoscolex corethrurus (Glossoscolecidae) strongly dominated. Three other peregrine species, Amynthas corticis, Amynthas gracilis (Megascolecidae) and Ocnerodrilus occidentalis (Ocnerodrilidae), were frequent in moist sites. No autochthonous species were found. Abundance and biomass of earthworms varied strongly within and between sites (0-338 individuals m-2, 0-96 g m-2 fresh weight). Pastures had significantly lower abundance than all other sites. The forest sites had similar earthworm abundance and biomass, with a tendency to be higher in younger succession stages. The coastal plain region has been strongly altered by human activities. Reasons for the lack of any autochthonous species and the dominance of one peregrine species require further investigation.
Resumo:
We analyse the variations produced on tsunami propagation and impact over a straight coastline because of the presence of a submarine canyon incised in the continental margin. For ease of calculation we assume that the shoreline and the shelf edge are parallel and that the incident wave approaches them normally. A total of 512 synthetic scenarios have been computed by combining the bathymetry of a continental margin incised by a parameterised single canyon and the incident tsunami waves. The margin bathymetry, the canyon and the tsunami waves have been generated using mathematical functions (e.g. Gaussian). Canyon parameters analysed are: (i) incision length into the continental shelf, which for a constant shelf width relates directly to the distance from the canyon head to the coast, (ii) canyon width, and (iii) canyon orientation with respect to the shoreline. Tsunami wave parameters considered are period and sign. The COMCOT tsunami model from Cornell University was applied to propagate the waves across the synthetic bathymetric surfaces. Five simulations of tsunami propagation over a non-canyoned margin were also performed for reference. The analysis of the results reveals a strong variation of tsunami arrival times and amplitudes reaching the coastline when a tsunami wave travels over a submarine canyon, with changing maximum height location and alongshore extension. In general, the presence of a submarine canyon lowers the arrival time to the shoreline but prevents wave build-up just over the canyon axis. This leads to a decrease in tsunami amplitude at the coastal stretch located just shoreward of the canyon head, which results in a lower run-up in comparison with a non-canyoned margin. Contrarily, an increased wave build-up occurs on both sides of the canyon head, generating two coastal stretches with an enhanced run-up. These aggravated or reduced tsunami effects are modified with (i) proximity of the canyon tip to the coast, amplifying the wave height, (ii) canyon width, enlarging the areas with lower and higher maximum height wave along the coastline, and (iii) canyon obliquity with respect to the shoreline and shelf edge, increasing wave height shoreward of the leeward flank of the canyon. Moreover, the presence of a submarine canyon near the coast produces a variation of wave energy along the shore, eventually resulting in edge waves shoreward of the canyon head. Edge waves subsequently spread out alongshore reaching significant amplitudes especially when coupling with tsunami secondary waves occurs. Model results have been groundtruthed using the actual bathymetry of Blanes Canyon area in the North Catalan margin. This paper underlines the effects of the presence, morphology and orientation of submarine canyons as a determining factor on tsunami propagation and impact, which could prevail over other effects deriving from coastal configuration.
Resumo:
The objective of this work was to compare phyllochron and leaf area on individual stalks of selected sugarcane (Saccharum officinarum) clones grown in a subtropical environment. A two-year field experiment was carried out in Santa Maria, RS, Brazil, during the 2007/2008 and 2008/2009 growing seasons. Three sugarcane clones were used: IAC 822045 (early), SP 711406 (median) and CB 4176 (late), in a complete randomized block design, with four replications. Expanded leaf and total leaf (tips) number were determined, and expanded leaf area was measured. The phyllochron (ºC day leaf-1) based on expanded and tip leaf number was estimated, using 10ºC as base temperature. Allometric relationships between individual area and number of expanded leaves were fitted. Phyllochron was analysed as a four-factor experiment: clone, growing season, phyllochron phase, and phyllochron type. The early clone had the greatest potential for growing in a subtropical climate because of higher leaf output and leaf area.
Resumo:
Abstract
Resumo:
The objective of this work was to evaluate the adaptation of anthurium (Anthurium andraeanum) cultivars as cut flowers in a subtropical area, located in north of Paraná State, Brazil. The Apalai, Ianomami, Kinã, nK 102, Parakanã, Rubi, and Terena cultivars were cultivated in a nursery under 80% shade. The number of leaves and inflorescences, floral stem length, length and width of inflorescences, and spadix length were evaluated. The experimental design was in completely randomized blocks, with six replicates and five plants per plot. During the 18 months evaluated, 'Parakanã' produced 11 inflorescences per plant, whereas the other cultivars produced seven to nine inflorescences per plant. The number of leaves produced per plant was: 'Ianomami', 25; 'Parakanã', 20; 'Apalai' and 'Terena', 15; 'Kinã' and 'Rubi', 11; and 'nK 102', 9. The Apalai, nK 102, Parakanã, and Rubi cultivars are the most recommended as cut flowers; the Ianomami cultivar is not recommended as a cut flower in this region.
Resumo:
Prior to European settlement, wetland basins covered 4 to 6 million acres, or approximately 11% of Iowa's surface area. Wetlands were part of every watershed in the state, but nearly 95% of them have been drained for agriculture. As Iowa was settled wetlands were drained and developed, resulting in the loss of wildlife habitat, damage to water quality, rapid topsoil erosion, and increased incidents and severity of flooding. The condition of Iowa’s remaining wetlands is poorly known. The goal of this project was to assess the ecological condition of prairie pothole wetlands in a defined region of north-central Iowa. This project has worked to develop and establish our wetland sampling methods, while providing baseline data regarding the basic chemical, physical, and biological status of Iowa’s permanent and semi-permanent wetland resources. The baseline data obtained from our monitoring methods is mainly in the form of numerical values derived from the lab analyses of our samples. This data will be used to begin building a database to interpret ecological condition changes in Iowa’s wetlands as the sampling regime and assessment methodology are repeated over time.
Resumo:
Rapid assessment methods are valuable tools for collecting information about the quality and status of natural systems. However, they are not a substitute for detailed surveys of those systems. Users of this method should consider that the method may under-score or over-score the site that’s assessed, especially when the site is not a typical fen (i.e. a sedge meadow could score lower than fens, but in-fact be a relatively high quality sedge meadow). This assessment can be used throughout most of the spring, summer and fall period, however the ideal “index period” would be from late May through early October when native plant communities, as well as invasive species, are most apparent.