FEM calibrated ARMAX model updating method for time domain damage identification

Due to environmental loads, mechanical damages, structural aging and human factors, civil infrastructure inevitably deteriorate during their service lives. Since their damage may claim human lives and cause significant economic losses, how to identify damages and assess structural conditions timely and accurately has drawn increasingly more attentions from structural engineering community worldwide. In this study, a fast and sensitive time domain damage identification method will be developed. To do this, a finite element model of a steel pipe laid on the soil is built and the structural responses are simulated under different damage scenarios. Based on the simulated data, an Auto Regressive Moving Average Exogenous (ARMAX) model is then built and calibrated. The calibrated ARMAX model is used to identify different damage scenarios through model updating process using clonal selection algorithm (CSA). The results demonstrate the application potential of the proposed method in identifying the pipeline conditions. To further verify its performance, laboratory tests of a steel pipe laid on the soil with and without soil support (free span damage) are carried out. The identification results of pipe-soil system show that the proposed method is capable of identifying damagein a complex structural system. Therefore, it can be applied to identifying pipeline conditions.

Study on LiFe1 − xSm xPO4/C used as cathode materials for lithium-ion batteries with low Sm component

LiFe1 − xSmxPO4/C cathode materials were synthesized though a facile hydrothermal method. Compared with high-temperature solid-phase sintering, the method can allow for the fabrication of low Sm content (2 %), a scarce and expensive rare earth element, while the presence of an optimized carbon coating with large amount of sp²-type carbon sharply increases the material’s electrochemical performance. The high-rate dischargeability at 5 C, as well as the exchange current density, can be increased by 21 and 86 %, respectively, which were attributed to the fine size and the large cell parameter a/c as much. It should be pointed out that the a/c value will be increased for the LiFePO4 Sm-doped papered by both of the two methods, while the mechanism is different: The value c is increased for the front and the value a is decreased for the latter, respectively.

A relação entre utilização de tecnologia no varejo e o intento estratégico : um estudo de caso do Grupo Pão de Açúcar

O desenvolvimento tecnológico aliado a transformação do ambiente organizacional, torna a exploração dos recursos de tecnologia da informação um componente que exerce fundamental influência na concepção da estratégia ernpresarisi. Este estudo busca compreender os fatores determinantes do relacionamento existente entre estratégia e tecnologia por meio da análise dos seguintes assuntos: as aplicações da tecnologia no varejo, as transformação do ambiente organizacional, a evolução do pensamento estratégico e a tecnologia como um dos principais fatores estratégicos para promover a competitividade no cenário da Nova Economia. Na pesquisa de campo, foi adotada a metodologia de pesquisa exploratória com a utilização de um estudo de caso de uma rede varejista brasileira, com o intuíto de ilustrar, com um exemplo real, o direcionamento estratégico influenciado pela tecnologia da informação de uma empresa que atua no mundo tradicional e virtual.

O pão e a festa: patrimônio imaterial e turismo em Juiz de Fora

Esta pesquisa tem por objetivo analisar os pedidos de registro do Pão Alemão e da Deutsches Fest como bens culturais de natureza imaterial de Juiz de Fora, sendo elementos representantes da cultura e da tradição dos imigrantes alemães que fazem parte da história da cidade. A Festa Alemã ou Deutsches Fest é, atualmente, um dos maiores eventos do calendário cultural e turístico de Juiz de Fora, cidade localizada na Zona da Mata do Estado de Minas Gerais. Realizada no bairro Borboleta, antiga Colônia Alemã, a festa foi criada em 1969, por descendentes dos alemães que imigraram para o município, em meados do século XIX. O Pão Alemão, encontrado nas festas e casas do bairro, além de ser o principal elo de preservação da memória construída por esses descendentes alemães, tornou-se importante elemento simbólico, enquanto modo de preparo da legítima culinária alemã. Pão e Festa fazem parte de uma tradição constituída, ao longo de anos, para afirmar a identidade do grupo, proporcionando-lhe ampliar sua participação nos âmbitos políticos e econômicos locais.

Pão Francês

Imagem componente do jogo “DigesTower (http://www.loa.sead.ufscar.br/digestower.php)” desenvolvido pela equipe do Laboratório de Objetos de Aprendizagem da Universidade Federal de São Carlos (LOA/UFSCar).

Pão Integral

Imagem componente do jogo “DigesTower (http://www.loa.sead.ufscar.br/digestower.php)” desenvolvido pela equipe do Laboratório de Objetos de Aprendizagem da Universidade Federal de São Carlos (LOA/UFSCar).

NUMERICAL SIMULATION of THE BEHAVIOR of THE BEHAVIOR of REINFORCED CONCRETE BEAMS and COLUMNS BY FEM CAASTEM 2000 PROGRAM

The objective of this paper is the numerical study of the behavior of reinforced concrete beams and columns by non-linear numerical simulations. The numerical analysis is based on the finite element method implemented in CASTEM 2000. This program uses the constitutive elastoplastic perfect model for the steel, the Drucker-Prager model for the concrete and the Newton-Raphson for the solution of non-linear systems. This work concentrates on the determination of equilibrium curves to the beams and force-strain curves to the columns. The numeric responses are confronted with experimental results found in the literature in order to check there liability of the numerical analyses.

Dissolved Po-210 and Pb-210 in Guarani aquifer groundwater, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Holographic recording in [Sb(Po-3)(3)](n)-Sb2O3 glassy films by photoinduced volume and refraction index changes

Glassy films of 0.2[Sb(PO3)(3)]-0,8Sb(2)O(3) with 0.8 mum-thickness were deposited on quartz substrates by electron beam evaporation. A contraction in the film thickness (photoinduced decrease in volume) and photobleaching effect associated with a decrease of up to 25% in the index of refraction has been observed in the films after irradiation near the bandgap (3.89 eV), using the 350.7 nm (3.54 eV) Kr+ ion laser line with 2.5 W/cm(2) for 30 min. A loss of 30% in the phosphorus concentration was measured by wavelength dispersive X-ray microanalysis in the film after laser irradiation with 5.0 W/cm(2) for 1.0 h. These photoinduced changes in the samples are dependent on the power density and intensity profile of the laser beam. Using a Lloyd's mirror setup for continuous wave holography it was possible to record holographic gratings with period from 500 nm up to 20 mum and depth profile of similar to50 nm in the films after laser irradiation with 5.0 W/cm(2) for 1 h. Real-time diffraction efficiency measurements have shown that ultraviolet irradiation induces first a refractive index grating formation, and after this, the photocon traction effect takes place generating an irreversible relief grating. Diffraction efficiency up to 10% was achieved for the recorded gratings. 3D-refraction index measurements and atomic force microscopy images are presented. (C) 2004 Elsevier B.V. All rights reserved.

A FEM approach to the equations of magneto-aerodynamics

In this work, a Finite Element Method treatment is outlined for the equations of Magnetoaerodynamics. In order to provide a good basis for numerical treatment of Magneto-aerodynamics, a full version of the complete equations is presented and FEM contribution matrices are deduced, as well as further terms of stabilization for the compressible flow case.

Integrating open source codes for solid modeling and automatic mesh generation in FEM applications

The applications of the Finite Element Method (FEM) for three-dimensional domains are already well documented in the framework of Computational Electromagnetics. However, despite the power and reliability of this technique for solving partial differential equations, there are only a few examples of open source codes available and dedicated to the solid modeling and automatic constrained tetrahedralization, which are the most time consuming steps in a typical three-dimensional FEM simulation. Besides, these open source codes are usually developed separately by distinct software teams, and even under conflicting specifications. In this paper, we describe an experiment of open source code integration for solid modeling and automatic mesh generation. The integration strategy and techniques are discussed, and examples and performance results are given, specially for complicated and irregular volumes which are not simply connected. © 2011 IEEE.

Micropartículas biodegradáveis para liberação prolongada intraocular de cetorolaco de trometamina obtidas po Spray Drying

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Elaboração e avaliação sensorial de pré-mistura de massa para pão sem glúten a partir de derivados energéticos de mandioca

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

O pão (1892-1896): veículo de divulgação literária e instrumento de intervenção na realidade social cearense

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)