Efeitos da farinha de folhas de mandioca sobre a atividade das enzimas AST, ALT, FA e lipídios hepáticos de ratos Wistar

Folhas de mandioca possuem substâncias como ligninas e saponinas que podem apresentar efeito hipolipidêmico. Todavia, um estudo recente relatou aumento no peso do fígado de ratos alimentados com dietas contendo farinha de folhas de mandioca (FFM - Manihot esculenta Crantz cv. Cacao), tornando-se necessário um estudo mais aprofundado dos efeitos desta farinha sobre os parâmetros hepáticos. Para este estudo, um ensaio biológico com 32 ratos machos Wistar foi conduzido por um período de 7 semanas, sendo os tratamentos: dieta controle e dietas contendo 5, 10 e 15% de FFM. As dietas contendo FFM não apresentaram efeitos sobre as atividades das enzimas Aspartato Aminotransferase (AST) e Fosfatase Alcalina (FA), mas aumentaram significativamente a atividade da enzima alanina aminotransferase (ALT). O estudo histopatológico revelou vacuolização do citoplasma dos hepatócitos para todos os grupos. No entanto, a freqüência de animais com vacuolização acentuada foi superior nos grupos que receberam dietas com FFM, apresentando também maiores teores de lipídios e colesterol total hepáticos e maior relação peso fígado/peso corporal. Estes resultados indicam que os antinutrientes presentes nas folhas de mandioca, como taninos, cianeto e saponinas, podem ser responsáveis pela redução da função hepática nos animais alimentados com FFM.

Avaliação do uso da casca do fruto e das folhas de Caesalpinia ferrea Martius como suplemento nutricional de Fe, Mn e Zn

As plantas medicinais podem ser usadas como fontes alternativas de nutrientes minerais na dieta alimentar. Elementos como ferro, manganês e zinco apresentam biodisponibilidade variável em função de suas formas químicas (espécies) presentes em um alimento. Este trabalho tem como objetivo avaliar o teor e a biodisponibilidade de ferro, manganês e zinco em extratos da casca do fruto e das folhas de Caesalpinia ferrea Martius por Espectrometria de Absorção Atômica com Chama (FAAS). Os agentes extratores testados foram as soluções de NaOH 0,05 mol. L-1, tampão Tris-HCl 0,05 mol.L-1 (pH= 8), tampão Tris-HCl 0,05 mol.L-1 (pH = 8) em dodecil sulfato de sódio (SDS) 1% (m/v), HCl 0,05 mol.L-1 e água quente (60 ºC). A casca do fruto e as folhas de Caesalpinia ferrea Martius apresentaram níveis altos de ferro e manganês quando comparados aos de outras plantas medicinais. Os elementos estudados mostraram predominante associação com compostos de alta e baixa massa molecular, espécies solúveis e insolúveis em água. Dentre os elementos analisados, o ferro apresentou melhor biodisponibilidade na casca do fruto e nas folhas. Manganês e zinco se mostraram mais biodisponível nas folhas. A casca do fruto e as folhas de Caesalpinia ferrea Martius podem ser uma fonte alternativa de ferro, manganês e zinco na dieta alimentar.

Análise da pureza genética e discriminação de cultivares de vinca (Catharanthus roseus (L.) G.Don) usando "random amplified polymorphic DNA" em DNA extraído de sementes e folhas

A técnica "Random Amplified Polymorphic DNA" (RAPD) surgiu como uma ferramenta útil para testar a pureza genética e a discriminação de cultivares em muitas espécies. É uma técnica simples, rápida, relativamente de baixo custo e permite o uso de DNA extraído de sementes secas, o que é muito importante em um programa de análise de sementes. O uso desta tecnologia no teste da pureza genética pode ser muito interessante para algumas espécies, como a vinca (Catharanthus roseus (L.) G.Don), pois pouco se conhece a respeito da seqüência de seu DNA. É interessante, também, pelo fato de existir grande número de "primers" comercialmente disponíveis, que podem ser prontamente utilizados para gerar dados. Essa técnica pode ser mais facilmente utilizada para gerar padrões de bandas polimórficas suficientes para discriminar genótipos diferentes. Todavia, no presente estudo, os padrões RAPD de bandas obtidas de amostras de DNA extraído de sementes de vinca em "bulk" foram não-consistentes, o mesmo ocorrendo com o uso de DNA extraído de sementes individuais de um mesmo cultivar, o que evidencia que a técnica não é aplicável para testar a pureza genética e a discriminação de cultivares de vinca. Entretanto, os padrões de bandas RAPD gerados a partir de DNA extraído de tecido foliar de plântulas foram mais reproduzíveis e poderiam ser considerados na caracterização de cultivares.

Alterações no conteúdo e nas propriedades antioxidantes de compostos fenólicos isolados de folhas galhadas de Rollinia laurifolia Schdtl (annonacea) : correlação com o dimorfismo sexual do coccideo indutor da galha

As galhas ou cecídeas, são caracterizadas por um crescimento anormal do tecido a estímulos específicos de um organismo invasor, que pode ser: bactéria, fungo, nematódeo ou artrópodo. A interação organismo invasor/planta hospedeira altera os estados químicos e fisiológicos dos tecidos da planta durante a cecidogênese, e provavelmente do organismo indutor. Vários tipos de estímulos bióticos e abióticos são conhecidos como potenciais alteradores da produção de compostos fenólicos nas plantas. Estes compostos estão envolvidos na defesa da planta contra pestes e patógenos. Uma espécie de coccídeo, ainda não identificada, induz galhas foliares em espécimes de Rollinia laurifolia Schdtl. (ANNONACEAE). Os coccídeos são caracterizados por um acentuado dimorfismo sexual, que também é expresso nas galhas que produzem. As galhas fêmeas são relativamente grandes, enquanto as galhas macho são menores e menos complexas. Os objetivos deste estudo foram verificar a relação ecológica/bioquímica entre inseto e planta averiguando possíveis diferenças entre folhas sadias e folhas galhadas, além também de verificá-las entre galhas fêmeas e galhas macho. Técnicas de determinação de fenóis totais, HPLC, TRAP e TBARS foram usadas neste estudo. Observou-se que a ocorrência de galhas nas folhas de R. laurifolia está relacionada à significativa redução no conteúdo fenólico total das mesmas. Qualitativamente também houve alteração no perfil fenólico das folhas galhadas em comparação com as folhas sadias. TRAP e TBARS também mostraram alterações no conteúdo fenólico das folhas galhadas. Alterações no conteúdo fenólico e na capacidade antioxidante relacionada ao sexo do galhador, também foram observadas. Nossos resultados sugerem que a interação galhador/R. laurifolia altera o perfil fenólico das folhas, consequentemente é alterada também a capacidade antioxidante dos extratos de folhas com galhas macho e galhas fêmeas. Uma causa provável para estas mudanças seria a difusão de oxigênio para o tecido foliar e a oxidação de biomoléculas, disparando sinais para a produção de diferentes compostos fenólicos, em conseqüência do estresse biótico durante a cecidogênese, possivelmente em uma tentativa de a planta buscar o equilíbrio fisiológico com o galhador.

O cinema brasileiro ainda queima o filme? Re-estudando atitudes relativas a filmes nacionais

This text has the objective to compare attitudes and opinions of undergraduation students about Brazilian movies, evaluated in 1991 and 2003. The research was motivated by the author's perceptions that the changes occurred in the public cultural stimulus policy, at the end of 80's and beginning of 90's drove the national productions to a significant quality improvement, allowing them to work in conditions to compete in the Brazilian market without needing to take any advantage of law or policy for minimum projection share to national movies. The results attested a significant enhancement in the evaluation by the respondents of Brazilian movie production.

Estudo comparativo da queima rápida com a queima tradicional nas propriedades de materiais cerâmicos de base argilos

Dutra, R. P. S.; Varela,M. L.; Nascimento, R. M. ; Gomes, U. U. ; Martinelli1, A. E. ; Paskocimas, C. A. Estudo comparativo da queima rápida com a queima tradicional nas propriedades de materiais cerâmicos de base argilosa. Cerâmica [online]. 2009, vol.55, n.333, pp. 100-105. ISSN 0366-6913. doi:Disponivem em: . Acesso em: 04 out. 2010.

Genotoxicidade e composição do material particulado emitido pela queima de Biomassa: um estudo de caso em Tangará da Serra, Região da Amazônia Brasileira

Tangara da Serra is located on southwestern Mato Grosso and is found to be on the route of pollutants dispersion originated in the Legal Amazon s deforestation area. This region has also a wide area of sugarcane culture, setting this site quite exposed to atmospheric pollutants. The objective of this work was to evaluate the genotoxicity of three different concentrations of organic particulate matter which was collected from August through December / 2008 in Tangara da Serra, using micronucleus test in Tradescantia pallida (Trad-MCN). The levels of particulate matter less than 10μm (MP10) and black carbon (BC) collected on the Teflon and polycarbonate filters were determined as well. Also, the alkanes and polycyclic aromatic hydrocarbons (PAHs) were identified and quantified on the samples from the burning period by gas chromatography detector with flame ionization detection (GC-FID). The results from the analyzing of alkanes indicate an antropic influence. Among the PAHs, the retene was the one found on the higher quantity and it is an indicator of biomass burning. The compounds indene(1,2,3-cd)pyrene and benzo(k)fluoranthene were identified on the samples and are considered to be potentially mutagenic and carcinogenic. By using Trad-MCN, it was observed a significant increase on the micronucleus frequency during the burning period, and this fact can be related to the mutagenic PAHs which were found on such extracts. When the period of less burnings is analyzed and compared to the negative control group, it was noted that there was no significant difference on the micronuclei rate. On the other hand, when the higher burning period is analyzed, statistically significant differences were evident. This study showed that the Trad-MCN was sensible and efficient on evaluating the genotoxicity potencial of organic matter from biomass burning, and also, emphasizes the importance of performing a chemical composition analysis in order to achieve a complete diagnosis on environmental risk control

Avaliação do potencial genotóxico e citotóxico associado a queima artesanal da castanha de caju no Município de João Câmara

The Brazil is the third largest producer of cashew nuts in the world. Despite the social and economic importance of the cashew nut, its production is still carried out artisanally. One of the main problems encountered in the cashew production chain are the conditions under which the roasting of the nut occurs to obtain the kernel from the shell. In the present study was conducted a biomonitoring of the genotoxic and cytotoxicity effects associated with the elements from the cashew nut roasting in João Câmara - RN, semi-arid region of Brazil. To assess the genotoxic was used the bioassay of micronucleus (MN) in Tradescantia pallida. In addition, it was performed a comparative between the Tradescantia pallida and KU-20 and other biomarkers of DNA damage, such as the nucleoplasmic bridges (NBP) and nuclear fragments (NF) were quantified. The levels of particulate matter (PM1.0, PM2.5, PM10) and black carbon (BC) were also measured and the inorganic chemical composition of the PM2.5 collected was determined using X-ray fluorescence spectrometry analysis and the assessment of the cytotoxicity by MTT assay and exclusion method by trypan blue. . For this purpose, were chosen: the Amarelão community where the roasting occurs and the Santa Luzia farm an area without influence of this process. The mean value of PM2.5 (Jan 2124.2 μg/m3; May 1022.2 μg/m3; Sep 1291.9 μg/m3) and BC (Jan 363.6 μg/m3; May 70.0 μg/m3; Sep 69.4 μg/m3) as well as the concentration of the elements Al, Si, P, S, Cl, K, Ca, Ti, Cr, Mn, Fe, Ni, Cu, Zn, Se, Br and Pb obtained at Amarelão was significantly higher than at Santa Luzia farm. The genotoxicity tests with T. pallida indicated a significant increase in the number of MN, NBP and NF and it was found a negative correlation between the frequency of these biomarkers and the rainfall. The concentrations of 200 μg/mL and 400 μg/mL of PM2.5 were cytotoxic to MRC-5 cells. All together, the results indicated genotoxicity and citotoxicity for the community of Amarelão, and the high rates of PM2.5 considered a potential contributor to this effect, mainly by the high presence of transition metals, especially Fe, Ni, Cu, Cr and Zn, these elements have the potential to cause DNA damage. Other nuclear alterations, such as the NPBs and NFs may be used as effective biomarkers of DNA damage in tetrads of Tradescantia pallida. The results of this study enabled the identification of a serious occupational problem. Accordingly, preventative measures and better practices should be adopted to improve both the activity and the quality of life of the population. These measures are of fundamental importance for the sustainable development of this activity.

Coordenação entre as respostas da catalase e da ascorbato peroxidade em folhas de feijão caupi submetidas a diferentes fontes de peróxido de hidrogênio

The plants are often exposed to variations in environmental conditions that may trigger metabolic disturbances leading to a consequent loss in productivity of crops. These stressful conditions usually induce an accumulation of reactive oxygen species (ROS) in the cell, a condition known how oxidative stress. Among these species, hydrogen peroxide (H2O2) is an important molecule involved in numerous signaling mechanisms. The present study aimed to understand the relationship between the different enzymatic mechanisms of elimination of H2O2 by catalase (CAT) and ascorbate peroxidase (APX) in leaf tissues of seedlings of the species Vigna unguiculata L. Walp, under conditions of oxidative stress induced by application of CAT inhibitor, 3-amino-1,2,4-triazole (3-AT), and H2O2 itself on the roots. Three experiments were conducted. The first experiment was performed applying the compound 3-AT (5 mM) during the time (hours). In the second experiment, seedlings were exposed to different concentrations of H2O2 (2.5, 5.0, 7.5, 10 mM) for 48 h. The third strategy included the pre-treatment with H2O2 (2.5 mM) for 24 h, followed by subsequent treatment with the inhibitor 3-AT and recovery control condition. Treatment with 3-AT causes a strong inhibition of CAT activity in leaf tissues accompanied by an increase of activity of APX. However a decrease in oxidative damage to lipids is not observed as indicated by TBARS. It was observed that activity of APX is directly linked to the content of peroxide. Inductions in the activities of CAT and APX were observed mainly in the seedlings treated with 2.5 mM H2O2. This can be associated with a decrease in oxidative damage to lipids. In contrast, one same tendency was not observed in treatments with higher concentrations of this ROS. These results suggest that the concentration of 2.5 mM H2O2 can induce responses antioxidants later in seedling cowpea. This concentration when applied as pre-treatment for 24 h promoted an induction systems removers CAT and APX, both in activity and in terms of gene expression. However this increment was not observed in the recovered plants and the plants subsequently subjected to 3-AT. Additionally, the pretreatment was not sufficient to attenuate the inhibition of CAT activity and oxidative damage to lipids caused by the subsequent application of this inhibitor. The results showed that the application of 3-AT and H2O2 in the root systems of seedlings of cowpea promote changes in the parameters analyzed in leaf tissues that indicate a direct response to the presence of these factors or systemic signaling mecanisms. H2O2 appears to activate the responses of two antioxidant systems in this study thar does not promote greater protection in case of additional treatment with 3-AT. This demonstrates the importance of the CAT system. In this work, complete results indicate that there is a difference between the signaling and the effects caused by exposure to H2O2 and by treatment with 3-AT

Atividade antioxidante e antiproliferativa de extratos de folhas de Plukenetia volubilis L. (EUPHORBIACEAE)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Adição de cascalho de perfuração da bacia potiguar em argilas para uso em materiais cerâmicos: influência da concentração e temperatura de queima.

One of waste produced on large scale during the well drilling is the gravel drilling. There are techniques for the treatment of the same, but there isn t consensus on what are the best in terms of economic and environmental. One alternative for disposal of this waste and objective of this paper is the incorporation and immobilization of gravel clay matrix to assess their technological properties. The Raw Materials used were characterized by the following techniques: Chemical Analysis by X-ray fluorescence (XRF), mineralogical analysis by X-ray Diffraction (XRD), Grain Size Analysis (FA) and Thermal Analysis by Thermogravimetry (TG) and thermodiferential (DTA). After characterizing, samples were formulated in the following percentages: 0, 5, 10, 15, 25, 50, 75, 100% (weight) of gravel drilling, then the pieces were pressed, dried (110 ° C) and sintered at temperatures of 850, 950 and 1050 ° C. After sintering, samples were tested for water absorption, linear shrinkage, flexural strength, porosity, density, XRD and test color. The results concluded that the incorporation of gravel drilling is a viable possibility for solid masonry bricks and ceramic blocks manufacture at concentrations and firing temperature described here. Residue incorporation reduces an environmental problem, the cost of raw materials for manufacture of ceramic products

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.