Study on regional differences in soil-water characteristics and their relevance to aquaculture productivity and fish disease

A total of 45 ponds used for fish polyculture were investigated in three zones of Bangladesh to identify the differences among the zones in respect to aqua-ecology, culture practices, fish productivity and health management. Four hundred and fifty fish from three zones were clinically examined by naked eye and histopathology. Out of total number of fish examined, 45 fish from Dhaka zones were examined for parasites and bacteria in addition to histopathology. Faded and haemorrhagic gill, skin, fin, scale loss and lesions were observed during fish examination. Aeromonas spp. Pseudomonas spp. and Streptococcus spp. were isolated respectively from 56%, 46% and 39% affected fish. Among the five water quality parameters analyzed, the highest average hardness and alkalinity respectively were recorded in Rajshahi (156 ppm and 142 ppm) followed by Dhaka (146 ppm and 132 ppm) and Chittagong (81 ppm and 90 ppm). The highest average pH was recorded in Mymensingh (7.52) followed by Rajshahi (7.13) and Chittagong (7.05). Water holding capacity of soil in Rajshahi zone was poor compared to other zones and farmers were found to be reluctant to fish farming.

Productivity and seasonal abundance of commercially important fishes of Gobindsagar Reservoir

Fishing experiments with gill nets were carried out at different centres of Gobindsagar reservoir through the years 1964-70. The seasonal abundance of main species of fishes and their zone of distribution were studied. Labeo diplostoma, Labeo bata, Barbus tor and Mystus seenghala are the main fish species of the reservoir. The abundance of the above species were observed to be the highest towards the Lunkhar arm of the reservoir.

Improving productivity - Opening the black box

Hourly productivity levels in the UK still remain behind those in some competitor countries. The government devotes much policy attention to enhancing productivity and continues to emphasise its five drivers - investment, innovation, skills, enterprise, and competition. This article argues that it is investment broadly defined that is the key to sustained productivity improvement. The emphasis should be on improving productivity simultaneously with improving the quality of production. Only thus will the gains be widely shared. In achieving these aims there are two prerequisites for policy-makers. The first is to ensure better coordination of policy than appears to be currently achieved by the present departmental structures in Whitehall. The second is to recognize fully the long and complex chain of causation that can be triggered by pulling on one policy lever. Such complexity can only be fully understood by more research on what actually goes on inside the black box of the organization. © 2006 Oxford University Press.

Impact of plankton structure on primary productivity in two beels of West Bengal, India

Planktonic community in floodplain wetlands embodies the energy transfer through this phase and indicates trophic status of lake. Originally rich bottom coupled with a conducive physicochemical environment encourages fast colonization of the plankton population. Present investigation was carried out in two floodplain wetlands having characteristics of open (Amda beel) and closed (Suguna beel) system. The physicochemical parameters of water and soil of the investigated heels were by and large conducive for planktonic growth. The density of plankton population varied between 1,346 and 2,170 u/l in Suguna bed whereas in Amda beel it ranged from 1,030 to 1,802 u/l. Seasonal fluctuations in water column were conspicuous and mostly dependent on the replenished resources and volume, A mixed and balanced population of diversified fauna constituted the plankton population of the investigated ecosystems. Mostly the diversity was observed to be maximum during winter seasons with coincidence of favorable temperature, dissolved oxygen and other physico-chemical parameters of water besides optimum solar penetration. Richness of planktonic structure in closed system (Suguna) resulted in higher fish production (1,570,05 kg/ha/yr) than that of open system (Amda) (384.4 kg/ha/yr).

The study of ecological condition on productivity of Tajan River estuary in Mazandaran Province Caspian Sea

This project was done during a one-year period (2006-2007) with the aim of assessing and evaluating the susceptible and vulnerable habitat of Tajan River estuarine region as well as identifying its ecological features. This region consists of Tajan estuarine region as one of the sub-basins of the Caspian Sea basin which covers a surface of 2km2. In this assessment, 6 riverine estuarine and marine stations were chosen in which non-biotic parameters such as temperature, salinity, dissolved oxygen, pH and nutrients, and biotic parameters such as variation, density, plankton, primary production by chlorophyll-a. Benthos variation density, silt and the organic materials of the sediments were sampled and measured monthly. The amount of chlorophyll-a concentration and primary production showed a lot of seasonal changes at these stations which ranged from0.3 to 96 mg/m3. The results from the primary productions indicated that the eastern station of the estuary had high concentrations of chlorophyll-a during all seasons (96mg/m3). The most important and dominant planktonic groups in this region included Bacillariophyta from plankton and copepoda from zooplankton. The most important Benthos communities consisted of Driessena polymorpha.Cerastoderma lamarki in estuarine region,Chironomus plumosus in riverine region and Hypaniola sp. In marine region. Assessing the annual variation in these three riverine, estuarine and marine regions, phytoplankton with 3.1, Zooplankton with 2.7 and Benthos with 1.9 Showed the most density in the estuarine region. Assessing the annual density, phytoplanktonic (6118967 no . in m3) and zooplanktonic (7272 no . in m3) communities showed the most density in the marine region. Assessing the statistical tests showed that the estuarine and riverine regions had a significant difference in planktonic density (p<0.005) compared with the marine region. Moreover, The zeoplanktonic density in the marine region had a significant difference (p<0.005) with estuarine and riverine regions. Tooki test and one-way variance Analysis showed that in assessing the planktonic groups (p<0.005) and Benthos (p<0.005), there was a significant difference in variation index between river with estuary, and estuary with the sea. The amount of the total annual live biomass of the Benthos resource in Tajan river estuarine region was estimated 757.66 g/m2.

The fisheries and fish stocks of Lake George: their productivity, exploitation, management and conservation

The study was confined to the fisheries of Lake George. The fishery of Lake George has been exploited under controlled exploitation but the permitted number of boats was fixed in the 1950s before the human population increased to the current level. Many more people were involved in fishing and it was feared that the fish stocks might not support the human population. The assignment involved preparation of a research proposal, collection of field data and production of a report in a period of eight months.

Towards productivity indicators for performance-based façade design in commercial buildings

Decision-making in the façade design process has a significant influence on several aspects of indoor environment, thereby making it a complex and multi-objective optimisation process. There are two principal barriers in the process of indentifying an optimal façade solution. Firstly, most existing indoor environmental evaluation methods do not account for all the indoor environmental quality (IEQ) aspects relevant to façade design. Secondly, the relationship between the physical properties of a particular façade design option and the resulting economic benefits accrued during its service-life is unknown. In this paper, we introduce the bases for establishing relationships between occupant productivity and the combinatorial effects of four key façade-related IEQ aspects, namely, thermal comfort, aural comfort, visual comfort and air quality, on occupant productivity. The proposed framework's potential is tested against seven existing experimental investigations and its applicability is illustrated by a simple façade design example. The proposed approach ultimately aims to provide a quantitative economic measure of alternative façade design options that would be applicable to early design stage. Aspects of the work that require further experimental validation are identified. © 2012 Elsevier Ltd.

Market-pull and technology-push in manufacturing start-ups in emerging industries

Purpose - As traditional manufacturing, previously vital to the UK economy, is increasingly outsourced to lower-cost locations, policy makers seek leadership in emerging industries by encouraging innovative start-up firms to pursue competitive opportunities. Emerging industries can either be those where a technology exists but the corresponding downstream value chain is unclear, or a new technology may subvert the existing value chain to satisfy existing customer needs. Hence, this area shows evidence of both technology-push and market-pull forces. The purpose of this paper is to focus on market-pull and technology-push orientations in manufacturing ventures, specifically examining how and why this orientation shifts during the firm's formative years. Design/methodology/approach - A multiple case study approach of 25 UK start-ups in emerging industries is used to examine this seldom explored area. The authors offer two models of dynamic business-orientation in start-ups and explain the common reasons for shifts in orientation and why these two orientations do not generally co-exist during early firm development. Findings - Separate evolution paths were found for strategic orientation in manufacturing start-ups and separate reasons for them to shift in their early development. Technology-push start-ups often changed to a market-pull orientation because of new partners, new market information or shift in management priorities. In contrast, many of the start-ups beginning with a market-pull orientation shifted to a technology-push orientation because early market experiences necessitated a focus on improving processes in order to increase productivity or meet partner specifications, or meet a demand for complementary products. Originality/value - While a significant body of work exists regarding manufacturing strategy in established firms, little work has been found that investigates how manufacturing strategy emerges in start-up companies, particularly those in emerging industries. © Emerald Group Publishing Limited.

Phycobilisome-Deficient Strains of Synechocystis sp. PCC 6803 Have Reduced Size and Require Carbon-Limiting Conditions to Exhibit Enhanced Productivity.

Reducing excessive light harvesting in photosynthetic organisms may increase biomass yields by limiting photoinhibition and increasing light penetration in dense cultures. The cyanobacterium Synechocystis sp. PCC 6803 harvests light via the phycobilisome, which consists of an allophycocyanin core and six radiating rods, each with three phycocyanin (PC) discs. Via targeted gene disruption and alterations to the promoter region, three mutants with two (pcpcT→C) and one (ΔCpcC1C2:pcpcT→C) PC discs per rod or lacking PC (olive) were generated. Photoinhibition and chlorophyll levels decreased upon phycobilisome reduction, although greater penetration of white light was observed only in the PC-deficient mutant. In all strains cultured at high cell densities, most light was absorbed by the first 2 cm of the culture. Photosynthesis and respiration rates were also reduced in the ΔCpcC1C2:pcpcT→C and olive mutants. Cell size was smaller in the pcpcT→C and olive strains. Growth and biomass accumulation were similar between the wild-type and pcpcT→C under a variety of conditions. Growth and biomass accumulation of the olive mutant were poorer in carbon-saturated cultures but improved in carbon-limited cultures at higher light intensities, as they did in the ΔCpcC1C2:pcpcT→C mutant. This study shows that one PC disc per rod is sufficient for maximal light harvesting and biomass accumulation, except under conditions of high light and carbon limitation, and two or more are sufficient for maximal oxygen evolution. To our knowledge, this study is the first to measure light penetration in bulk cultures of cyanobacteria and offers important insights into photobioreactor design.