Effects of defoliation height on regrowth of timothy and meadow fescue in the generative and vegetative phases of growth

Selostus: Leikkuukorkeuden vaikutus timotein ja nurminadan jälkikasvuun generatiivisessa ja vegetatiivisessa kasvuvaiheessa

Activity of dalbavancin, alone and in combination with rifampicin, against meticillin-resistant Staphylococcus aureus in a foreign-body infection model.

The activity of dalbavancin, a representative of the lipoglycopeptide antibiotics, alone and in combination with rifampicin, was investigated against meticillin-resistant Staphylococcus aureus (MRSA) in a foreign-body infection model in guinea pigs. The MIC, MBC and time-kill profile of dalbavancin were determined for MRSA ATCC 43300 in the logarithmic (MBClog) and stationary (MBCstat) growth phases. The pharmacokinetic profile of dalbavancin was determined in sterile cage fluid in guinea pigs. The activity of intraperitoneal dalbavancin (40, 60 or 80mg/kg as a single dose), rifampicin (12.5mg/kg/12h for 4 days) and their combination was assessed against planktonic and biofilm MRSA. The MIC of dalbavancin was 0.078mg/L; MBClog and MBCstat were both >128Ã- MIC. In time-kill studies, bacterial reduction of 3log10CFU/mL was achieved after 48h at â0/00¥32Ã- MIC (logarithmic growth) and at â0/00¥1Ã- MIC (stationary growth). Dalbavancin was neither synergistic nor antagonistic with rifampicin, and prevented the emergence of rifampicin resistance in vitro. The half-life of dalbavancin in cage fluid was 35.8-45.4h and the concentration remained above the MIC of MRSA during 7 days after a single dose. Dalbavancin reduced planktonic MRSA in cage fluid at high dose (60mg/kg and 80mg/kg) but failed to eradicate biofilm MRSA from cages. In combination with rifampicin, dalbavancin at 80mg/kg cured 36% of infected cages, and emergence of rifampicin resistance was completely prevented. Dalbavancin at 80mg/kg and in combination with rifampicin eradicated approximately one-third of cage-associated MRSA infections and prevented emergence of rifampicin resistance.

Quantile Estimation in Non-Stationary Streaming Data

We provide an incremental quantile estimator for Non-stationary Streaming Data. We propose a method for simultaneous estimation of multiple quantiles corresponding to the given probability levels from streaming data. Due to the limitations of the memory, it is not feasible to compute the quantiles by storing the data. So estimating the quantiles as the data pass by is the only possibility. This can be effective in network measurement. To provide the minimum of the mean-squared error of the estimation, we use parabolic approximation and for comparison we simulate the results for different number of runs and using both linear and parabolic approximations.

Influence of stationary phase and eluent properties on chromatographic separation of carbohydrates

In this thesis, the sorption and elastic properties of the cation-exchange resins were studied to explain the liquid chromatographic separation of carbohydrates. Na+, Ca2+ and La3+ form strong poly(styrene-co-divinylbenzene) (SCE) as well as Na+ and Ca2+ form weak acrylic (WCE) cation-exchange resins at different cross-link densities were treated within this work. The focus was on the effects of water-alcohol mixtures, mostly aqueous ethanol, and that of the carbohydrates. The carbohydrates examined were rhamnose, xylose, glucose, fructose, arabinose, sucrose, xylitol and sorbitol. In addition to linear chromatographic conditions, non-linear conditions more typical for industrial applications were studied. Both experimental and modeling aspectswere covered. The aqueous alcohol sorption on the cation-exchangers were experimentally determined and theoretically calculated. The sorption model includes elastic parameters, which were obtained from sorption data combined with elasticity measurements. As hydrophilic materials cation-exchangers are water selective and shrink when an organic solvent is added. At a certain deswelling degree the elastic resins go through glass transition and become as glass-like material. Theincreasing cross-link level and the valence of the counterion decrease the sorption of solvent components in the water-rich solutions. The cross-linkage or thecounterions have less effect on the water selectivity than the resin type or the used alcohol. The amount of water sorbed is higher in the WCE resin and, moreover, the WCE resin is more water selective than the corresponding SCE resin. Theincreased aliphatic part of lower alcohols tend to increase the water selectivity, i.e. the resins are more water selective in 2-propanol than in ethanol solutions. Both the sorption behavior of carbohydrates and the sorption differences between carbohydrates are considerably affected by the eluent composition and theresin characteristics. The carbohydrate sorption was experimentally examined and modeled. In all cases, sorption and moreover the separation of carbohydrates are dominated by three phenomena: partition, ligand exchange and size exclusion. The sorption of hydrophilic carbohydrates increases when alcohol is added into the eluent or when carbohydrate is able to form coordination complexes with the counterions, especially with multivalent counterions. Decreasing polarity of the eluent enhances the complex stability. Size exclusion effect is more prominent when the resin becomes tighter or carbohydrate size increases. On the other hand,the elution volumes between different sized carbohydrates decreases with the decreasing polarity of the eluent. The chromatographic separation of carbohydrateswas modeled, using rhamnose and xylose as target molecules. The thermodynamic sorption model was successfully implemented in the rate-based column model. The experimental chromatographic data were fitted by using only one adjustable parameter. In addition to the fitted data also simulated data were generated and utilized in explaining the effect of the eluent composition and of the resin characteristics on the carbohydrate separation.

Supporting knowledge creation and sharing in the early phases of the strategic innovation process

The driving forces of technology and globalization continuously transform the business landscape in a way which undermines the existing strategies and innovations of organizations. The challenge for organizations is to establish such conditions where they are able to create new knowledge for innovative business ideas in interaction between other organizations and individuals. Innovation processes continuously need new external stimulations and seek new ideas, new information and knowledge locating more and more outside traditional organizational boundaries. In several studies, the early phases of the innovation process have been considered as the most critical ones. During these phases, the innovation process can emerge or conclude. External knowledge acquirement and utilization are noticed to be important at this stage of the innovation process giving information about the development of future markets and needs for new innovative businessideas. To make it possible, new methods and approaches to manage proactive knowledge creation and sharing activities are needed. In this study, knowledge creation and sharing in the early phases of the innovation process has been studied, and the understanding of knowledge management in the innovation process in an open and collaborative context advanced. Furthermore, the innovation management methods in this study are combined in a novel way to establish an open innovation process and tested in real-life cases. For these purposes two complementary and sequentially applied group work methods - the heuristic scenario method and the idea generation process - are examined by focusing the research on the support of the open knowledge creation and sharing process. The research objective of this thesis concerns two doctrines: the innovation management including the knowledge management, and the futures research concerning the scenario paradigm. This thesis also applies the group decision support system (GDSS) in the idea generation process to utilize the converged knowledge during the scenario process.

Ion-exchange resins as stationary phase in reactive chromatography

Dynamic behavior of bothisothermal and non-isothermal single-column chromatographic reactors with an ion-exchange resin as the stationary phase was investigated. The reactor performance was interpreted by using results obtained when studying the effect of the resin properties on the equilibrium and kinetic phenomena occurring simultaneously in the reactor. Mathematical models were derived for each phenomenon and combined to simulate the chromatographic reactor. The phenomena studied includes phase equilibria in multicomponent liquid mixture¿ion-exchange resin systems, chemicalequilibrium in the presence of a resin catalyst, diffusion of liquids in gel-type and macroporous resins, and chemical reaction kinetics. Above all, attention was paid to the swelling behavior of the resins and how it affects the kinetic phenomena. Several poly(styrene-co-divinylbenzene) resins with different cross-link densities and internal porosities were used. Esterification of acetic acid with ethanol to produce ethyl acetate and water was used as a model reaction system. Choosing an ion-exchange resin with a low cross-link density is beneficial inthe case of the present reaction system: the amount of ethyl acetate as well the ethyl acetate to water mole ratio in the effluent stream increase with decreasing cross-link density. The enhanced performance of the reactor is mainly attributed to increasing reaction rate, which in turn originates from the phase equilibrium behavior of the system. Also mass transfer considerations favor the use ofresins with low cross-link density. The diffusion coefficients of liquids in the gel-type ion-exchange resins were found to fall rapidly when the extent of swelling became low. Glass transition of the polymer was not found to significantlyretard the diffusion in sulfonated PS¿DVB ion-exchange resins. It was also shown that non-isothermal operation of a chromatographic reactor could be used to significantly enhance the reactor performance. In the case of the exothermic modelreaction system and a near-adiabatic column, a positive thermal wave (higher temperature than in the initial state) was found to travel together with the reactive front. This further increased the conversion of the reactants. Diffusion-induced volume changes of the ion-exchange resins were studied in a flow-through cell. It was shown that describing the swelling and shrinking kinetics of the particles calls for a mass transfer model that explicitly includes the limited expansibility of the polymer network. A good description of the process was obtained by combining the generalized Maxwell-Stefan approach and an activity model that was derived from the thermodynamics of polymer solutions and gels. The swelling pressure in the resin phase was evaluated by using a non-Gaussian expression forthe polymer chain length distribution. Dimensional changes of the resin particles necessitate the use of non-standard mathematical tools for dynamic simulations. A transformed coordinate system, where the mass of the polymer was used as a spatial variable, was applied when simulating the chromatographic reactor columns as well as the swelling and shrinking kinetics of the resin particles. Shrinking of the particles in a column leads to formation of dead volume on top of the resin bed. In ordinary Eulerian coordinates, this results in a moving discontinuity that in turn causes numerical difficulties in the solution of the PDE system. The motion of the discontinuity was eliminated by spanning two calculation grids in the column that overlapped at the top of the resin bed. The reactive and non-reactive phase equilibrium data were correlated with a model derived from thethermodynamics of polymer solution and gels. The thermodynamic approach used inthis work is best suited at high degrees of swelling because the polymer matrixmay be in the glassy state when the extent of swelling is low.

Kattila-koski inunder Polar-Cirkeln

Helsingfors : A.W. Gröndahl & A.C. Öhman 1845 : Dresden, Adler u. Dietze

Nuclear DNA content variation in life history phases of the Bonnemaisoniaceae (Rhodophyta)

Nuclear DNA content in gametophytes and sporophytes or the prostrate phases of the following species of Bonnemaisoniaceae (Asparagopsis armata, Asparagopsis taxiformis, Bonnemaisonia asparagoides, Bonnemaisonia clavata and Bonnemaisonia hamifera) were estimated by image analysis and static microspectrophotometry using the DNA-localizing fluorochrome DAPI (4′, 6-diamidino-2-phenylindole, dilactate) and the chicken erythrocytes standard. These estimates expand on the Kew database of DNA nuclear content. DNA content values for 1C nuclei in the gametophytes (spermatia and vegetative cells) range from 0.5 pg to 0.8 pg, and for 2C nuclei in the sporophytes or the prostrate phases range from 1.15-1.7 pg. Although only the 2C and 4C values were observed in the sporophyte or the prostrate phase, in the vegetative cells of the gametophyte the values oscillated from 1C to 4C, showing the possible start of endopolyploidy. The results confirm the alternation of nuclear phases in these Bonnemaisoniaceae species, in those that have tetrasporogenesis, as well as those that have somatic meiosis. The availability of a consensus phylogenetic tree for Bonnemaisoniaceae has opened the way to determine evolutionary trends in DNA contents. Both the estimated genome sizes and the published chromosome numbers for Bonnemaisoniaceae suggest a narrow range of values consistent with the conservation of an ancestral genome.

Multispectral Analysis of Paper Production Phases

Paperitehtaissa paperin väriä arvioidaan L*a*b –arvojen perusteella. Tämä lähestymistapa ei ole tarkka ja johtaa siihen, että saman luokkaan kuuluvat paperit saatetaan havaita eri värisinä. Tässä diplomityössä tarkastellaan värien arviointia multispektraalisen kuvantamisen avulla. Menetelmän ajatuksena on verrata standardoidun heijastuman spektriä kohteena olevan paperirullan heijastuman spektriin mittaustapojen avulla. 12:n kirjallisuuteen perustuvan ja yhden tutkimusryhmämme kehittämän mittaustavan joukosta pyrittiin valitsemaan parhaat mittaustavat tutkimuksien perusteella. Mittaustavan tehokkuus tarkoittaa kykä tunnistaa eroavaisuuksia värisävyn, värikylläisyyden ja valoisuuden perusteella. Mittaustapoja tutkittiin sekä keinotekoisilla kuvilla että aidoilla paperinäytteillä. Tuloksena maksimi-minimi-, aritmeettisen keskiarvon minimi- ja geometrisen keskiarvon minimimenetelmä olivat parhaita mittaustapoja.

The Early Phases of Innovation Process - Case: New Wireless E-Business Opportunities in Forest Industry

Tutkimuksen tavoitteena oli soveltaa innovaatioprosessiteorioita käytäntöön konteksti huomioonottaen, koska langattoman sähköisen liiketoiminnan nopeat muutokset, metsäteollisuuden erityispiirteet ja ei-kaupallisuus asettavat erityistarpeita innovoinnille. Painopiste on prosessin aikaisissa vaiheissa, koska ne ovat kriittisiä koko innovaatioprosessin menestymisen kannalta. Tähtäimenä oli löytää yrityssektorille uusia langattomia sähköisen liiketoiminnan mahdollisuuksia, jotka hyödyttävät tutkimuksessa mukanaolevaa yritystä. Tutkimuksessa käytettiin konstruktiivista tutkimusotetta ja metodeina sähköistä aivomyrskyä, tarkistuslistaa sekä GDSS- ja postikyselyä.Tutkimuksen tuloksena on esitetty innovaatioprosessin aikaiset vaiheet kirjallisuudesta, metsäteollisuuden erityispiirteet ja innovaatioprosessisovellus. Lisäksi tämä tutkimus tuotti uusia sähköisen liiketoiminnan ideoita, suoritti niille seulonnan ja kävi läpi alustavan tutkimuksen.

Quantum Hall Phases of two-component bosons

The recent production of synthetic magnetic fields acting on electroneutral particles, such as atoms or photons, has boosted interest in the quantum Hall physics of bosons. Adding pseudospin 1/2 to the bosons greatly enriches the scenario, as it allows them to form an interacting integer quantum Hall (IQH) phase with no fermionic counterpart. Here we show that, for a small two-component Bose gas on a disk, the complete strongly correlated regime, extending from the integer phase at filling factor ν = 2 to the Halperin phase at filling factor ν = 2 / 3, is well described by composite fermionization of the bosons. Moreover we study the edge excitations of the IQH state, which, in agreement with expectations from topological field theory, are found to consist of forward-moving charge excitations and backward-moving spin excitations. Finally, we demonstrate how pair-correlation functions allow one to experimentally distinguish the IQH state from competing states, such as non-Abelian spin singlet (NASS) states.

Topological phases in small quantum Hall samples

Topological order has proven a useful concept to describe quantum phase transitions which are not captured by the Ginzburg-Landau type of symmetry-breaking order. However, lacking a local order parameter, topological order is hard to detect. One way to detect it is via direct observation of anyonic properties of excitations which are usually discussed in the thermodynamic limit, but so far has not been realized in macroscopic quantum Hall samples. Here we consider a system of few interacting bosons subjected to the lowest Landau level by a gauge potential, and theoretically investigate vortex excitations in order to identify topological properties of different ground states. Our investigation demonstrates that even in surprisingly small systems anyonic properties are able to characterize the topological order. In addition, focusing on a system in the Laughlin state, we study the robustness of its anyonic behavior in the presence of tunable finite-range interactions acting as a perturbation. A clear signal of a transition to a different state is reflected by the system's anyonic properties.

Accessory phases as a tool to investigate magmatic underplating in polymetamorphic metasediments : an example from a fossil lower crust : Ivrea Verbano zne, NW Italy

The Ivrea and the Strona-Ceneri zones, NW italy and S Switzerland, offer the possibility to study the continental crust of the Southern Alps. Because of its high metamorphic degree and the abundant Permo- Carboniferous mafic intrusions, the Ivrea Zone is classically interpreted an exposed section trough the Permian lower crust. The present work is focused here on metasedimentary slices (septa) intercalated within Permian gabbro (mafic complex). In particular I studied the evolution of accessory phases such as rutile and zircon and the chemistry of the metasediments. The septa build an irregular and discontinuous band that cut obliquely the mafic complex from its deepest part (N) to its roof (S). The chemistry of the metasediments evolves along the band and the chemical evolution can be compared with that observed in the country-rock surrounding the mafic intrusion to the NE and overprinted by a main regional metamorphic event. This suggests that the degree of chemical depletion of the septa was mainly established during the same regional metamorphic event. Moreover it suggests that incorporation of the septa within the gabbro did not modify their original stratigraphie distribution within the crust. It implies that the mafic complex has been emplaced following a dynamic substantially different from the classic model of « gabbro glacier » (Quick et al., 1992; Quick et al., 1994). It is more likely that it has been emplaced by repeated injections of sills at different depths during a protracted period of time. Zircon trace elements and U-Pb ages suggest that regional metamorphism occurred 330-320Ma, the first sills in the deepest part of the Mafic Complex are injected at ~300Ma, the mafic magmas reached higher levels in the crust at 285Ma and the magmatic activity continued locally until 275Ma. The ages of detrital cores in zircons fix the maximal sedimentation age at ~370Ma, this age corresponds therefore with the maximal age of the incorporation of the Ivrea zone within the lower crust. I propose that the Ivrea zone has been accreted to the lower crust during the Hercynian orogeny sensu lato. The analysis of detrital ages suggests that the source terrains for the Ivrea zone and those for the Strona-Ceneri zone have a completely different Palaeozoic history. The systematic analysis of rutile in partially molten metasediments of the Ivrea zone reveals the occurrence of two generations. The two generations are characterized by a different chemistry and textural distribution. A first generation is formed during pro-grade metamorphism in the restitic counterpart. The second generation is formed in the melts during cooling at the same time that part of the first generation re-equilibrate. Re-equilibration of the first generation seems to be spatially controlled by the presence of fluids. Locally the second generation forms overgrowths on the first generation. Considered the different diffusivity of U and Pb in rutile, U heterogeneities have important implication for U-Pb dating of rutile. ID-TIMS and LA-ICPMS dating coupled with a careful textural investigation (SEM) suggest that rutile grains are characterized by multiple path along which Pb diffusion can occur: volume diffusion is an important process, but intragrain and subgrain boundaries provide additional high diffusivity pathways for Pb escape and reduce drastically the effective diffusion length. -- La zone d'Ivrea et la zone de Strona-Ceneri, en Italie nord-occidentale et Suisse méridionale, offrent la possibilité d'étudier la croûte continentale des Alpes du Sud. En raison du haut degré métamorphique et l'abondance d'intrusions mafiques d'âge Permo-Carbonifère [complexe mafique), la zone d'Ivrea est interprétée classiquement comme de la croûte inférieure permienne. Ce travail ce concentre sur des bandes metasédimentaires (septa) incorporées dans les magmas mafiques lors de l'intrusion. Les septa forment une bande irrégulière qui coupe obliquement le complexe mafique du bas (N) vers le haut (S). La chimie des septa évolue du bas vers le haut et l'évolution chimique se rapproche de l'évolution observé dans la roche encaissante l'intrusion affecté par un événement métamorphique régionale. Cette relation suggère que le degré d'appauvrissement chimique des septa a été établit principalement lors de l'événement métamorphique régional. De plus l'incorporation dans les gabbros n'a pas perturbée la distribution stratigraphique originelle des septa. Ces deux observations impliquent que le métamorphisme dans la roche encaissante précède la mise en place du gabbro et que cette dernière ne se fait pas selon le modèle classique (« gabbro glacier » de Quick et al., 1992, 1994), mais se fait plutôt par injections répétées de sills a différentes profondeurs. Les âges U-Pb et les éléments traces des zircons suggèrent que le métamorphisme régionale a eu lieu 330-320Ma, alors que les premiers sills dans la partie profonde du Mafic Complex s'injectent à ~300Ma, le magmatisme mafique atteigne des niveaux supérieurs à 285Ma et continue localement jusqu'à 270Ma. Les âges des coeurs détritiques des zircons permettent de fixer l'âge maximale de sédimentation à ~370Ma ce qui correspond donc à l'âge maximale de l'incorporation de la zone d'Ivrea dans la croûte inférieur. L'analyse systématique des rutiles, nous a permit de montrer l'existence de plusieurs générations qui ont une répartition texturale et une chimie différente. Une génération se forme lors de l'événement UHT dans les restites, une autre génération se forme dans les liquides lors du refroidissement, au même temps qu'une partie de la première génération se rééquilibre au niveau du Zr. Localement la deuxième génération peut former des surcroissances autour de la première génération. Dans ces cas, des fortes différences en uranium entre les deux générations ont des importantes implications pour la datation U-Pb sur rutile. Classiquement les ratios Pb/U dans le rutile sont interprétés comme indiquant l'âges du refroidissement du minéral sous une température à la quelle la diffusion du Pb dans le minéral n'est plus détectable et la diffusion à plus hautes températures est assumée se faire par «volume diffusion» dans le grain (Mezger et al., 1989). Par des datations ID-TIMS (sur grain entier) et LA-ICPMS (in-situ) et une analyse texturale (MEB) approfondie nous montrons que cette supposition est trop simpliste et que le rutile est repartie en sous-domaines. Chacun de ces domaines a ça propre longueur ou chemin de diffusion spécifique. Nous proposons donc une nouvelle approche plus cohérente pour l'interprétation des âges U-Pb sur rutile.