Reguladores vegetais e a anatomia da folha de tomate (Lycopersicon esculentum Mill.) cv. Ângela Gigante

O objetivo do presente trabalho foi verificar os efeitos dos reguladores vegetais GA3 50 mg.l-1, NAA 100 mg.l-1, CCC 1500 mg.l-1 e SADH 3000 mg.l-1 em folhas de tomate, Lycopersicon esculentum Mill. cv. 'Ângela Gigante'. Os promotores de crescimento aumentaram o número de estômatos por milímetro quadrado na epiderme adaxial e diminuíram o número de células epidérmicas em ambos os lados da folha. em relação ao controle, os retardantes de crescimento aumentaram em maior nível a espessura do parênquima lacunoso do que os promotores de crescimento.

Produção de bulbinhos de cebola em bandejas de isopor

Com o objetivo de estudar a viabilidade de produção de bulbinhos de cebola sob ambiente protegido em diferentes tipos de bandejas de poliestireno expandido foram instalados dois experimentos. No primeiro, trabalhando com a cultivar Serrana, foram avaliadas três tipos de bandejas com diferentes números de plantas por célula: uma planta/célula na bandeja de 288 células, três a cinco plantas/célula na de 128 e cinco a nove plantas/célula na de 72 células. No outro experimento, testaram-se nove cultivares, semeadas somente em bandejas de 128 células com três plantas por célula. Utilizou-se o delineamento em blocos ao acaso com quatro repetições no primeiro ensaio e cinco no segundo, sendo cada parcela constituída por uma bandeja. Observou-se que quanto maior a densidade de plantio menor o tamanho do bulbinho (diâmetro e peso). O manejo adequado de adubações em cobertura pode viabilizar, tecnicamente, a produção de cinco bulbinhos com 1,3 cm de diâmetro (2 g) por célula, na bandeja de 128 células. Quanto ao ensaio de cultivares, Crioula da Agroflora, Crioula da Granja Lotário e Houston apresentaram 83%, 67% e 81% de plantas bulbificadas, enquanto que nas demais ( Aurora , Baia Periforme , Brownsville , Petroline , Pira Ouro , Pirana e Serrana ) obteve-se 100% de bulbificação. As principais vantagens na produção de bulbinhos em bandeja foram: uniformidade, ausência de plantas daninhas e de patógenos. É um sistema que pode ser útil aos viveiristas que tem entressafra de mudas nos meses de agosto a novembro, período de produção dos bulbinhos. Poderá, também, ser uma alternativa na produção de bulbinhos para conserva, no controle de qualidade de lotes de sementes e em programas de melhoramento de cebola.

Redução da área foliar e o rendimento do pepino japonês

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Métodos de formação de mudas de maracujazeiro amarelo

Grande parte do sucesso de uma cultura está em implantá-la com mudas de alta qualidade. O objetivo do estudo foi avaliar métodos de formação de mudas de maracujazeiro amarelo quanto à qualidade das muda formada. Os tratamentos utilizados foram: 1- Mudas formadas em sacolas plásticas, preenchidas com terra adubada e misturada com esterco de curral curtido, com fertirrigação uma vez por semana; 2- Mudas formadas em tubetes de plástico rígido, com substrato à base de casca de pinus e vermiculita, mantidos em bancada e recebendo fertirrigação uma vez por semana; 3- Idêntico ao tratamento 2, utilizando-se bandejas de poliestireno expandido; 4- Idêntico ao tratamento 3, sem fertirrigação, mas com uso de floating a cada dois dias; 5- Idêntico ao tratamento 4, com o uso de floating todo o período. O delineamento experimental foi completamente aleatorizado, com cinco tratamentos e quatro repetições. Na casa de vegetação, cada parcela foi composta por 64 plantas, sendo avaliadas semanalmente em oito plantas por parcela as seguintes variáveis: altura da planta; comprimento da raiz; matéria seca da parte aérea; matéria seca da parte radicular. O restante das mudas foi levado a campo para determinação da percentagem de pegamento e análise do desenvolvimento vegetativo inicial. Neste segundo estágio, cada parcela foi composta por cinco plantas. Sob casa de vegetação, o tratamento 5 apresentou os maiores valores para todas as variáveis, exceto para comprimento de raiz, onde houve superioridade do tratamento 1. em campo, observou-se 100% de pegamento para todos os tratamentos, sendo que o tratamento 5 apresentou as maiores médias para altura de plantas.

Selection for bulb maturity in onion

Embora seja possível produzir cebola (Allium cepa) o ano inteiro no Brasil, a maioria dos cultivares nacionais apresentam bulbos com baixa qualidade, o que proporcionou grande importação de cebola da Argentina, do tipo Valenciana, que não bulbifica no Brasil, mas que agradou os consumidores brasileiros. Para estudar o efeito da seleção para maturidade de bulbos baseada em progênies de meios irmãos obtidas do híbrido triplo intervarietal [Crioula x (Pira Ouro x Valenciana Sintética 14)] foram semeadas 17 progênies selecionadas para maturidade precoce e 25 para tardia, além da geração F1 e dos cultivares Pira Ouro (dias curtos), Crioula (intermediários) e Armada (dias longos), totalizando 46 tratamentos. O delineamento foi em blocos ao acaso, com três repetições de 32 plantas por parcela, cultivadas em bandejas de isopor. As progênies precoces apresentaram ciclo médio variando de 67 a 83 dias e as tardias de 85 a 103 dias. Na comparação da porcentagem de plantas improdutivas esta diferença também foi evidente, variando de 0,0% a 6,2% nas precoces e de 8,1% a 59,5% nas tardias. Os coeficientes de herdabilidades obtidos foram elevados, variando de 0,65 (porcentagem de plantas improdutivas, na seleção tardia) a 0,80 (peso médio de bulbo, na seleção precoce), sendo, em média, superiores na população selecionada para maturidade precoce. Foram obtidas progênies com peso de bulbo superior às testemunhas 'Pira Ouro' e 'Crioula' e com ciclo que não diferia destas. A seleção para maturidade foi altamente eficiente e a população selecionada para maturidade precoce apresenta grande potencial de originar cultivares adaptados, com produção e qualidade de bulbos superiores às disponíveis no mercado brasileiro.

Yield performance and leaf nutrient levels of coffee cultivars under different plant densities

Cultivares de cafeeiro (Coffea Arabica L.) adaptadas às regiões de cultivo, com população de plantas otimizada e adequado estado nutricional são premissas para a obtenção de produções elevadas de café. Estudou-se a produção trienal de café e o teor foliar de macronutrientes de cultivares de cafeeiro em função das densidades de plantio. Foram utilizados os cultivares Catuaí Amarelo (IAC 47), Obatã (IAC 1669-20), Acaiá (IAC 474-19) e Icatu Amarelo (IAC 2944) nas populações de 2.500 plantas ha-1 com duas plantas por cova; e, 5.000, 7.519 e 10.000 plantas ha-1 com uma planta por cova. As plantas foram adubadas de modo homogêneo, porém, sem calagem. À medida que a população de cafeeiros aumentou, a produtividade trienal de café aumentou, a produção de frutos por planta diminuiu e os teores foliares de fósforo (P), potássio (K) e enxofre (S) aumentaram. Nos cafeeiros sob adensamento encontrou-se igual ou maior teor de macronutrientes do que naqueles sob espaçamento convencional, sendo que os maiores teores foram observados nas cultivares de porte alto, e os menores, na cultivar Obatã, de porte baixo. Nos cafeeiros das covas com uma planta observou-se maior produção de café e menores concentrações de P, Ca e S do que naqueles das covas com duas plantas. No geral, os cultivares e as populações de cafeeiros estavam com teores de N e S acima dos limites de referência citados na literatura, mas com teores dos demais macronutrientes dentro da faixa adequada.

Produtividade e qualidade de frutos de mamoeiro ‘sunrise solo’ em função de doses de nitrogênio e boro

The study aimed to evaluate the yield and fruit quality of papaya 'Sunrise Solo' as function of nitrogen and boron fertilization. The experiment had a randomized block design with four replications, two plants per plot with a single border. To make up the treatments, we used the experimental array Plan Puebla III, which set the rates for nitrogen (0.0 to 111.2 - 200 - 288.9 - 400 g plant(-1), and B (0.0 - 0.83 - 1.5 - 2.16 - 3.0 g plant(-1)), in a total of ten treatments. The addition of nitrogen increased the yield, average fruit weight and number of fruits per plant. The nitrogen and boron increased the diameter and length of the fruit, amount of seeds and content of soluble solids. The pH of the pulp decreased linearly with increasing doses of nitrogen and boron. It was observed a significant effect of N rates on the level of vitamin C.

Parasitism of Greenbugs (Homoptera: Aphididae) by Lysiphlebus testaceipes (Hymenoptera: Braconidae) in Grain Sorghum: Implications for Augmentative Biological Control

Field cage studies were conducted to describe the relationship between the percentage of Lysiphlebus testaceipes (Cresson) parasitism (as measured by aphid mummies) and densities of greenbug, Schizaphis graminum Rondani, on grain sorghum, Sorghum bicolor L. In 1993 and 1994, a biotype E-susceptible grain sorghum hybrid was grown in field cages and L. testaceipes adults were released after each plant was infested with 20 biotype E greenbugs. The release rates were 0, 0.5, 1.0, and 2.0 wasps per plant in 1993, and 0, 0.16, 0.33, and 0.5 wasps per plant in 1994. Greenbugs and mummies were counted 1-2 times a week on all leaves of 2-4 randomly selected plants per cage. A release rate of 0.33-0.5 wasps per plant infested with 20 greenbugs maximized the number of mummies produced and prevented the greenbugs from reaching an economic threshold of 1,000 greenbugs per plant. Peak numbers of mummies occurred ≈400-500 DD (10°C base) after the initial wasp release. Regression analyses showed that the greenbug population started decreasing when the percentage of parasitism (as measured by mummies) reached 20-30 %. Greenbugs in the absence of wasps significantly reduced yield in 1994, but not in 1993.

Efeito da densidade de plantas de Bracharia decumbens Stapf sobre o crescimento inicial de mudas de Eucalyptus grandis W. Hill ex Maiden

In order to verify the effect of Brachiaria decumbens plant density on the initial growth of Eucalyptus grandis plants, one assay was conducted under semi-controlled conditions of soil fertility and humidity. Dark red Latossol, collected from the arable layer, was used as substrate in 50 liters amianthus cement boxes. One seedling of Eucalyptus was planted in each box. Fifteen days later, seedlings of B. decumbens were transplanted on the same box. The treatments consisted of 0, 4, 8, 12, 16, 20, 24, 28, 32, 36, 40, 60, 80, 100, and 120 plants of B. decumbens. The experimental design was the complete randomized design, with 15 treatments and four replicates. The Eucalyptus plants that lived with B. decumbens were evaluated for stem diameter, plant high, leaf area, and dry weight of stem, branches and leaves. B. decumbens plants were evaluated for dry weight of aerial parts. B. decumbens, at the density level of four plants per m 2 and over, reduced of the initial growth of the Eucalyptus plants. B. decumbens reduced on average 27.78% stem diameter, 18.47% plant high, 70.56% leaf number, 63.26% leaf area, and 55.22%, 77.29% and 55.30% of stem, branch and leaf dry weight, respectively. Plant high was not a good parameter to evaluate the B. decumbens interference.

Períodos de interferência de erva-quente (Spermacoce atifolia) no crescimento inicial de eucalipto (Eucalyptus grandis)

The buttonweed (Spermacoce latifolia) is becoming a plant among the most current infesting eucalypts plantation in State of São Paulo due to the continual use of same herbicides and control methods. Owing this, this work aimed to evaluate the effects of periods of company and control of S. Iatifolia on the initial growth of Eucalyptus grandis, planted in winter and summer. Only one seedling of Eucalyptus was planted in amianthus cement box and submitted for crescent periods of company and control of S. Iatifolia (0, 20, 60 and 80 days in competition or not). The densities of plants of S. Iatifolia were 4 and 16 plants per m 2 (under winner and summer conditions). The experimental period was 100 days after the planting (DAP). The experimental design for both experiments was the completely randomized blocks (CRB) with ten treatments and four replicates. The results of plant high, stem diameter, dries weights and leaf area showed that the before interference period (BIP), whole period of prevention for interference (WPPI) and critical period of prevention for interference (CPPI) were 40, 60, and 60 DAR, respectively, under winner conditions. Under summer conditions, the WPPI and CPPI were 20, 80 and 20 to 80 DAR.

Yield and fruit size distribution of processing tomato cultivars

The productivity and fruit size distribution of 28 processing tomato cultivars were analyzed to determine the ones with potential for fresh market. The experiment was done in Jaboticabal-SP, Brazil (21o15'22'' South, 48o18'58'' West, altitude 595 m), in a Haplorthox soil, from June to December. The cultivars H 7155, Hypeel 108, Andino, U 573, H 9036, Ipa 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Peelmech, Curicó, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570 and PSX 37511 were evaluated. The experimental design was randomized blocks, with four repetitions, and five plants per experimental unit. Fruits harvested from each experimental unit were counted, classified by transversal diameter (large, medium, small, very small and cull) and then weighed. Cultivars AG 72, H 9498, Hypeel 45, RPT 1095 and Curicó yielded more than 70 fruits per plant, on average. The total production per plant of cultivars AG 72, H 9498, Hypeel 45, H 7155, Hypeel 108, Halley, Hitech, RPT 1095, H 9494, H 9036 and Curicó was greater than 4 kg. Considering the weight of large and medium fruits, categories which are important for fresh market, the cultivars H 2710, Botu 13, U 573, Hypeel 45, Yuba, RPT 1294 and Ipa 6 presented values above 50% for production.

Total and harvest-date yield of processing tomato cultivars

The productivity of 28 tomato cultivars was evaluated over three stages of harvest. The study was carried out during from June to December of 1999 in an open field at the experimental area of the Section of Olericulture and Aromatic Medicinal Plants, Department of Crop Production at FCAV-UNESP, Jaboticabal, SP, Brazil. The cultivars studied were H 7155, Hypeel, Andino, U 573, H 9036, IPA 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Pelmeech, Curico, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570, and PSX 37511. The experimental design was a randomized block design with four repetitions, with five plants per plot. Productivity was evaluated at three stages of harvest at 119, 149 and 179 days after seeding. There were no significant differences among the cultivars at the first harvest (119 days). The majority of the cultivars produced their highest yield at the second harvest; the most productive cultivars were Curicó and AG 72, which yielded 4.69 and 4.67 kg/plant, respectively, although they did not differ statistically from the cultivars Hypeel 45 (4.35 kg/plant) and H 9498 (4.16 kg/plant). Yields of the cultivars Andino and H 9494 were evenly distributed between the second and third harvests. At the third harvest, cultivar IPA 6 had the highest yield (2.9 kg/plant) and was statistically different from all other cultivars except H 9036 (2.34 kg). These two cultivars had the most delayed and concentrated maturity, making them suitable for mechanical harvesting, although at a later time. Cultivar AG 72 had the greatest total yield (5.76 kg/plant), but it was not statistically different from cultivars Hypeel 45 (5.43 kg), Curico (4.17 kg), H 9498 (4.83 kg), H 7155 (4.58 kg) and Halley (4.55 kg). All of the cultivars, with the exception of cultivars H 9036, IPA 6, Andino and H 9494 showed in the second harvest concentrated maturity, making it suitable for mechanical harvesting.

Path analysis and expected response in indirect selection for grain yield in soybean

This study aimed to determine the best auxiliary trait for indirect selection of soybean grain yield, through path analysis and in avoidance of the adverse effects of multicollinearity and expected response. Seventy-nine F5 soybean genotypes from the cross FT-Cometa x Bossier were used. The populations were distributed on the field was the families inserted with replicated controls. Primary and secondary traits of grain yield were evaluated in four phenotypically superior plants per family. The traits number of pods, height and number of nodes were considered as the most important, showing the best combination of direct effect and genotypic correlation. The number of pods achieved the highest expected gain through the estimation method based on the selection differential. On the other hand, plant height, by the method based on selection intensity, was not a good indicator of the most productive plants.

Response of rootstocks to stem canker and the production and quality of melon under protected cultivation

Two tests were performed. In the first, resistance to Didymella bryoniae was determined for the following genotypes: the pumpkins 'Ikky', 'Agroceres', 'Kirameki' and 'Shelper', watermelon progenies 1a, 2a, 3a, 5a, 1b, 2b, 3b and 5b, and 'Gherkin' (C. anguria). The plants were inoculated with the fungus during transplanting. The evaluations of the test were performed every 15 d according to a scoring scale adopted by Dusi et al. (1994). The second test examined compatibility among the rootstocks x grafts, and their effects on production. The rootstocks, 5 pumpkins including 'Ikky', 'Agroceres', 'Kirameki', 'Shelper', six watermelon progenies 1a, 2a, 5a, 1b, 2b and 5b, and one 'Gherkin', were planted one week before planting of the grafted 'Bônus No. 2' melon. The experiments were carried out with 12 treatments, including the control ('Bônus No. 2') with 3 replications with 14 grafted plants per each replication. For the first test, the first three evaluations (at 15, 30 and 45 d after inoculation) did not show characteristic lesions of stem canker, but progeny 3b was found to be susceptible in evaluations performed at 60 and 75 d after inoculation. Progeny 3a demonstrated intermediate susceptibility, while progenies 1a, 2a, 5a, 1b, 2b and 5b, the pumpkins 'Kirameki', 'Shelper', 'Ikky' and 'Agroceres', and 'Gherkin', showed resistance to Didymella bryoniae. In the second test, watermelon progenies 1a, 5a, 1b and 2b, and the pumpkins 'Kirameki', 'Shelper', 'Ikky' and 'Agroceres' showed a level of grafting success of 100%, while results with progenies 2a and 5b, and 'Gherkin' were different in grafting success, respectively 91.67, 98.33 and 43.33%. For other fruit parameters, weight, longitudinal and transverse diameters, pulp thickness and level of total soluble solids, there were no differences among the treatments.

Fungigação no controle do mofo branco e produtividade do feijoeiro em condições de cerrado brasileiro

The aim of this research was to evaluate the white mold severity (Sclerotinia sclerotiorum (Lib.) of Bary), bean production components and yield (Phaseolus vulgaris L.), variety Perola, according to the application of procimidone fungicide (Sialex 500), through fungigation (center pivot) and automotive sprayer (Uniport). The study was carried under field production commercial conditions, in Primavera do Leste - MT - Brazil. The experiment consisted of 5 treatments (with 4 repetitions of 4 ha each), all with two procimidone applications (1.2 kg ha-1 each application, same as, 0.6 kg a.i. per hectare) to the 42 and 52 days after seeding. The water depths of 5.5 and 11.0 mm were tested in the application through central pivot (this had your checked uniformity), providing volumes of 55.000 and 110.000 L ha-1, respectively, and the volumes of 120 and 200 L ha-1 in the automotive sprayer. The severity of disease was evaluated by the percentage of the area affected by plant damage using diagramatic grade scale of white mold severity, as described by Azevedo (1998). The values were used to calculate the area under the disease progress curve (AUDPC). They were also analyzed, the number of the fungus apothecia during the crop cycle and the residual sclerotias weight in harvest. On this occasion, it was also evaluated the crop yield parameters: number of plants per plot (final stand), pods per plant, grains per pod, medium weight of 200 grains and productivity of grains. The AUDPC values, apothecia to 42, 49 and 56 days after seeding, sclerotias in 2 soil kg and the crop productivity parameters were submitted to the variance analysis and Tukey Test at 0.05 of probability. This test was also applied in the comparison among the different fungicide application methods, independent of spray volumes in each one. The statistical processing was accomplished by STAT program. The results showed that weren't differences among application techniques studied in relation to productivity parameters, however, best white mold control, smaller apothecia number to 49 and 56 days after seeding and smaller weight of residual sclerotias in the harvest were obtained with the fungigation, independently of the spray volume used.