Model-based Segmentation and Image Fusion of 3D Computed Tomography and 3D Ultrasound of the Eye for Radiotherapy Planning

For radiotherapy treatment planning of retinoblastoma inchildhood, Computed Tomography (CT) represents thestandard method for tumor volume delineation, despitesome inherent limitations. CT scan is very useful inproviding information on physical density for dosecalculation and morphological volumetric information butpresents a low sensitivity in assessing the tumorviability. On the other hand, 3D ultrasound (US) allows ahigh accurate definition of the tumor volume thanks toits high spatial resolution but it is not currentlyintegrated in the treatment planning but used only fordiagnosis and follow-up. Our ultimate goal is anautomatic segmentation of gross tumor volume (GTV) in the3D US, the segmentation of the organs at risk (OAR) inthe CT and the registration of both. In this paper, wepresent some preliminary results in this direction. Wepresent 3D active contour-based segmentation of the eyeball and the lens in CT images; the presented approachincorporates the prior knowledge of the anatomy by usinga 3D geometrical eye model. The automated segmentationresults are validated by comparing with manualsegmentations. Then, for the fusion of 3D CT and USimages, we present two approaches: (i) landmark-basedtransformation, and (ii) object-based transformation thatmakes use of eye ball contour information on CT and USimages.

Accuracy and predictability in use of AO three-dimensionally preformed titanium mesh plates for posttraumatic orbital reconstruction: a pilot study.

The aim of this study was to prospectively evaluate the accuracy and predictability of new three-dimensionally preformed AO titanium mesh plates for posttraumatic orbital wall reconstruction.We analyzed the preoperative and postoperative clinical and radiologic data of 10 patients with isolated blow-out orbital fractures. Fracture locations were as follows: floor (N = 7; 70%), medial wall (N = 1; 1%), and floor/medial wall (N = 2; 2%). The floor fractures were exposed by a standard transconjunctival approach, whereas a combined transcaruncular transconjunctival approach was used in patients with medial wall fractures. A three-dimensional preformed AO titanium mesh plate (0.4 mm in thickness) was selected according to the size of the defect previously measured on the preoperative computed tomographic (CT) scan examination and fixed at the inferior orbital rim with 1 or 2 screws. The accuracy of plate positioning of the reconstructed orbit was assessed on the postoperative CT scan. Coronal CT scan slices were used to measure bony orbital volume using OsiriX Medical Image software. Reconstructed versus uninjured orbital volume were statistically correlated.Nine patients (90%) had a successful treatment outcome without complications. One patient (10%) developed a mechanical limitation of upward gaze with a resulting handicapping diplopia requiring hardware removal. Postoperative orbital CT scan showed an anatomic three-dimensional placement of the orbital mesh plates in all of the patients. Volume data of the reconstructed orbit fitted that of the contralateral uninjured orbit with accuracy to within 2.5 cm(3). There was no significant difference in volume between the reconstructed and uninjured orbits.This preliminary study has demonstrated that three-dimensionally preformed AO titanium mesh plates for posttraumatic orbital wall reconstruction results in (1) a high rate of success with an acceptable rate of major clinical complications (10%) and (2) an anatomic restoration of the bony orbital contour and volume that closely approximates that of the contralateral uninjured orbit.

The temporoparietal fascia flap: a versatile tool in head and neck reconstruction.

PURPOSE OF REVIEW: The article reviews recent significant advances and current applications of the temporoparietal fascia flap (TPFF) in head and neck surgery. RECENT FINDINGS: The recent literature describes a wide span of new applications of the TPFF in many areas. Significant developments and refinements in the reconstruction of orbitomaxillary composite defects and orbital exenteration cavities are reported. The TPFF combined with alloplastic framework is gaining in importance in external ear reconstruction. Innovative prefabricated skin or soft-tissue grafts based on the TPFF are used to restore facial contour or in the reconstruction of complex facial defects. The free TPFF finds a role in laryngotracheal reconstruction as a vascular carrier to support cartilage grafts. SUMMARY: Owing to its reliability and unequalled structural properties, the TPFF still plays a central role in facial reconstruction. Future investigation will likely incorporate the free TPFF as a vascular carrier of bioengineered tissues, such as cartilage and mucosa, for various head and neck indications.

A knowledge based signal processing approach to tonic identification in indian classical music

In this paper, we describe several techniques for detecting tonic pitch value in Indian classical music. In Indian music, the raga is the basic melodic framework and it is built on the tonic. Tonic detection is therefore fundamental for any melodic analysis in Indian classical music. This workexplores detection of tonic by processing the pitch histograms of Indian classic music. Processing of pitch histograms using group delay functions and its ability to amplify certain traits of Indian music in the pitch histogram, is discussed. Three different strategies to detect tonic, namely, the concert method, the template matching and segmented histogram method are proposed. The concert method exploits the fact that the tonic is constant over a piece/concert.templatematchingmethod and segmented histogrammethodsuse the properties: (i) the tonic is always present in the background, (ii) some notes are less inflected and dominant, to detect the tonic of individual pieces. All the three methods yield good results for Carnatic music (90−100% accuracy), while for Hindustanimusic, the templatemethod works best, provided the v¯adi samv¯adi notes for a given piece are known (85%).

Statistical modeling of bowing control applied to violin sound synthesis

Excitation-continuous music instrument control patterns are often not explicitly represented in current sound synthesis techniques when applied to automatic performance. Both physical model-based and sample-based synthesis paradigmswould benefit from a flexible and accurate instrument control model, enabling the improvement of naturalness and realism. Wepresent a framework for modeling bowing control parameters inviolin performance. Nearly non-intrusive sensing techniques allow for accurate acquisition of relevant timbre-related bowing control parameter signals.We model the temporal contour of bow velocity, bow pressing force, and bow-bridge distance as sequences of short Bézier cubic curve segments. Considering different articulations, dynamics, and performance contexts, a number of note classes are defined. Contours of bowing parameters in a performance database are analyzed at note-level by following a predefined grammar that dictates characteristics of curve segment sequences for each of the classes in consideration. As a result, contour analysis of bowing parameters of each note yields an optimal representation vector that is sufficient for reconstructing original contours with significant fidelity. From the resulting representation vectors, we construct a statistical model based on Gaussian mixtures suitable for both the analysis and synthesis of bowing parameter contours. By using the estimated models, synthetic contours can be generated through a bow planning algorithm able to reproduce possible constraints caused by the finite length of the bow. Rendered contours are successfully used in two preliminary synthesis frameworks: digital waveguide-based bowed stringphysical modeling and sample-based spectral-domain synthesis.

Parameterization of written signatures based on EFD

In this work we propose a method to quantify written signatures from digitalized images based on the use of Elliptical Fourier Descriptors (EFD). As usually signatures are not represented as a closed contour, and being that a necessary condition in order to apply EFD, we have developed a method that represents the signatures by means of a set of closed contours. One of the advantages of this method is that it can reconstruct the original shape from all the coefficients, or an approximated shape from a reduced set of them finding the appropriate number of EFD coefficients required for preserving the important information in each application. EFD provides accurate frequency information, thus the use of EFD opens many possibilities. The method can be extended to represent other kind of shapes.

Statistical modeling of violin bowing parameter contours

We present a framework for modeling right-hand gestures in bowed-string instrument playing, applied to violin. Nearly non-intrusive sensing techniques allow for accurate acquisition of relevant timbre-related bowing gesture parameter cues. We model the temporal contour of bow transversal velocity, bow pressing force, and bow-bridge distance as sequences of short segments, in particular B´ezier cubic curve segments. Considering different articulations, dynamics, andcontexts, a number of note classes is defined. Gesture parameter contours of a performance database are analyzed at note-level by following a predefined grammar that dictatescharacteristics of curve segment sequences for each of the classes into consideration. Based on dynamic programming, gesture parameter contour analysis provides an optimal curve parameter vector for each note. The informationpresent in such parameter vector is enough for reconstructing original gesture parameter contours with significant fidelity. From the resulting representation vectors, weconstruct a statistical model based on Gaussian mixtures, suitable for both analysis and synthesis of bowing gesture parameter contours. We show the potential of the modelby synthesizing bowing gesture parameter contours from an annotated input score. Finally, we point out promising applicationsand developments.

CT radiation dose in children: a survey to establish age-based diagnostic reference levels in Switzerland

This work aimed at assessing the doses delivered in Switzerland to paediatric patients during computed tomography (CT) examinations of the brain, chest and abdomen, and at establishing diagnostic reference levels (DRLs) for various age groups. Forms were sent to the ten centres performing CT on children, addressing the demographics, the indication and the scanning parameters: number of series, kilovoltage, tube current, rotation time, reconstruction slice thickness and pitch, volume CT dose index (CTDI(vol)) and dose length product (DLP). Per age group, the proposed DRLs for brain, chest and abdomen are, respectively, in terms of CTDI(vol): 20, 30, 40, 60 mGy; 5, 8, 10, 12 mGy; 7, 9, 13, 16 mGy; and in terms of DLP: 270, 420, 560, 1,000 mGy cm; 110, 200, 220, 460 mGy cm; 130, 300, 380, 500 mGy cm. An optimisation process should be initiated to reduce the spread in dose recorded in this study. A major element of this process should be the use of DRLs.

3D noise power spectrum applied on clinical mdct scanners: effects of reconstruction algorithms and reconstruction filters

The noise power spectrum (NPS) is the reference metric for understanding the noise content in computed tomography (CT) images. To evaluate the noise properties of clinical multidetector (MDCT) scanners, local 2D and 3D NPSs were computed for different acquisition reconstruction parameters.A 64- and a 128-MDCT scanners were employed. Measurements were performed on a water phantom in axial and helical acquisition modes. CT dose index was identical for both installations. Influence of parameters such as the pitch, the reconstruction filter (soft, standard and bone) and the reconstruction algorithm (filtered-back projection (FBP), adaptive statistical iterative reconstruction (ASIR)) were investigated. Images were also reconstructed in the coronal plane using a reformat process. Then 2D and 3D NPS methods were computed.In axial acquisition mode, the 2D axial NPS showed an important magnitude variation as a function of the z-direction when measured at the phantom center. In helical mode, a directional dependency with lobular shape was observed while the magnitude of the NPS was kept constant. Important effects of the reconstruction filter, pitch and reconstruction algorithm were observed on 3D NPS results for both MDCTs. With ASIR, a reduction of the NPS magnitude and a shift of the NPS peak to the low frequency range were visible. 2D coronal NPS obtained from the reformat images was impacted by the interpolation when compared to 2D coronal NPS obtained from 3D measurements.The noise properties of volume measured in last generation MDCTs was studied using local 3D NPS metric. However, impact of the non-stationarity noise effect may need further investigations.

Cross-frequency coupling in EEG revealed by adaptive oscillation tracking.

Introduction: Neuronal oscillations have been the focus of increasing interest in the neuroscientific community, in part because they have been considered as a possible integrating mechanism through which internal states can influence stimulus processing in a top-down way (Engel et al., 2001). Moreover, increasing evidence indicates that oscillations in different frequency bands interact with one other through coupling mechanisms (Jensen and Colgin, 2007). The existence and the importance of these cross-frequency couplings during various tasks have been verified by recent studies (Canolty et al., 2006; Lakatos et al., 2007). In this study, we measure the strength and directionality of two types of couplings - phase-amplitude couplings and phase-phase couplings - between various bands in EEG data recorded during an illusory contour experiment that were identified using a recently-proposed adaptive frequency tracking algorithm (Van Zaen et al., 2010). Methods: The data used in this study have been taken from a previously published study examining the spatiotemporal mechanisms of illusory contour processing (Murray et al., 2002). The EEG in the present study were from a subset of nine subjects. Each stimulus was composed of 'pac-man' inducers presented in two orientations: IC, when an illusory contour was present, and NC, when no contour could be detected. The signals recorded by the electrodes P2, P4, P6, PO4 and PO6 were averaged, and filtered into the following bands: 4-8Hz, 8-12Hz, 15-25Hz, 35-45Hz, 45-55Hz, 55-65Hz and 65-75Hz. An adaptive frequency tracking algorithm (Van Zaen et al., 2010) was then applied in each band in order to extract the main oscillation and estimate its frequency. This additional step ensures that clean phase information is obtained when taking the Hilbert transform. The frequency estimated by the tracker was averaged over sliding windows and then used to compare the two conditions. Two types of cross-frequency couplings were considered: phase-amplitude couplings and phase-phase couplings. Both types were measured with the phase locking value (PLV, Lachaux et al., 1999) over sliding windows. The phase-amplitude couplings were computed with the phase of the low frequency oscillation and the phase of the amplitude of the high frequency one. Different coupling coefficients were used when measuring phase-phase couplings in order to estimate different m:n synchronizations (4:3, 3:2, 2:1, 3:1, 4:1, 5:1, 6:1, 7:1, 8:1 and 9:1) and to take into account the frequency differences across bands. Moreover, the direction of coupling was estimated with a directionality index (Bahraminasab et al., 2008). Finally, the two conditions IC and NC were compared with ANOVAs with 'subject' as a random effect and 'condition' as a fixed effect. Before computing the statistical tests, the PLV values were transformed into approximately normal variables (Penny et al., 2008). Results: When comparing the mean estimated frequency across conditions, a significant difference was found only in the 4-8Hz band, such that the frequency within this band was significantly higher for IC than NC stimuli starting at ~250ms post-stimulus onset (Fig. 1; solid line shows IC and dashed line NC). Significant differences in phase-amplitude couplings were obtained only when the 4-8 Hz band was taken as the low frequency band. Moreover, in all significant situations, the coupling strength is higher for the NC than IC condition. An example of significant difference between conditions is shown in Fig. 2 for the phase-amplitude coupling between the 4-8Hz and 55-65Hz bands (p-value in top panel and mean PLV values in the bottom panel). A decrease in coupling strength was observed shortly after stimulus onset for both conditions and was greater for the condition IC. This phenomenon was observed with all other frequency bands. The results obtained for the phase-phase couplings were more complex. As for the phase-amplitude couplings, all significant differences were obtained when the 4-8Hz band was considered as the low frequency band. The stimulus condition exhibiting the higher coupling strength depended on the ratio of the coupling coefficients. When this ratio was small, the IC condition exhibited the higher phase-phase coupling strength. When this ratio was large, the NC condition exhibited the higher coupling strength. Fig. 3 shows the phase-phase couplings between the 4-8Hz and 35-45Hz bands for the coupling coefficient 6:1, and the coupling strength was significantly higher for the IC than NC condition. By contrast, for the coupling coefficient 9:1 the NC condition gave the higher coupling strength (Fig. 4). Control analyses verified that it is not a consequence of the frequency difference between the two conditions in the 4-8Hz band. The directionality measures indicated a transfer of information from the low frequency components towards the high frequency ones. Conclusions: Adaptive tracking is a feasible method for EEG analyses, revealing information both about stimulus-related differences and coupling patterns across frequencies. Theta oscillations play a central role in illusory shape processing and more generally in visual processing. The presence vs. absence of illusory shapes was paralleled by faster theta oscillations. Phase-amplitude couplings were decreased more for IC than NC and might be due to a resetting mechanism. The complex patterns in phase-phase coupling between theta and beta/gamma suggest that the contribution of these oscillations to visual binding and stimulus processing are not as straightforward as conventionally held. Causality analyses further suggest that theta oscillations drive beta/gamma oscillations (see also Schroeder and Lakatos, 2009). The present findings highlight the need for applying more sophisticated signal analyses in order to establish a fuller understanding of the functional role of neural oscillations.

Revisit of multiple epiphyseal dysplasia: ethnic difference in genotypes and comparison of radiographic features linked to the COMP and MATN3 genes.

Multiple epiphyseal dysplasia (MED) is a genetically heterogeneous group of diseases characterized by variable degrees of epiphyseal abnormality primarily involving the hip and knee joints. The purpose of this study was to investigate the frequency of mutations in individuals with a clinical and radiographic diagnosis of MED and to test the hypothesis that characteristic radiological findings may be helpful in predicting the gene responsible. The radiographs of 74 Korean patients were evaluated by a panel of skeletal dysplasia experts. Six genes known to be associated with MED (COMP, MATN3, COL9A1, COL9A2, COL9A3, and DTDST) were screened by sequencing. Mutations were found in 55 of the 63 patients (87%). MATN3 mutations were found in 30 patients (55%), followed by COMP mutations in 23 (41%), and COL9A2 and DTDST mutations in one patient (2%) each. Comparisons of radiographic findings in patients with COMP and MATN3 mutations showed that albeit marked abnormalities in hip and knee joints were observed in both groups, the degree of involvement and the morphology of dysplastic epiphyses differed markedly. The contour of the pelvic acetabulum, the presence of metaphyseal vertical striations, and/or the brachydactyly of the hand were also found to be highly correlated with the genotypes. The study confirms that MATN3 and COMP are the genes most frequently responsible for MED and that subtle radiographic signs may give precious indications on which gene(s) should be prioritized for mutational screening in a given individual.

Early auditory processing

ABSTRACT (English)An accurate processing of the order between sensory events at the millisecond time scale is crucial for both sensori-motor and cognitive functions. Temporal order judgment (TOJ) tasks, is the ability of discriminating the order of presentation of several stimuli presented in a rapid succession. The aim of the present thesis is to further investigate the spatio-temporal brain mechanisms supporting TOJ. In three studies we focus on the dependency of TOJ accuracy on the brain states preceding the presentation of TOJ stimuli, the neural correlates of accurate vs. inaccurate TOJ and whether and how TOJ performance can be improved with training.In "Pre-stimulus beta oscillations within left posterior sylvian regions impact auditory temporal order judgment accuracy" (Bernasconi et al., 2011), we investigated if the brain activity immediately preceding the presentation of the stimuli modulates TOJ performance. By contrasting the electrophysiological activity before the stimulus presentation as a function of TOJ accuracy we observed a stronger pre-stimulus beta (20Hz) oscillatory activity within the left posterior sylvian region (PSR) before accurate than inaccurate TOJ trials.In "Interhemispheric coupling between the posterior sylvian regions impacts successful auditory temporal order judgment" (Bernasconi et al., 2010a), and "Plastic brain mechanisms for attaining auditory temporal order judgment proficiency" (Bernasconi et al., 2010b), we investigated the spatio-temporal brain dynamics underlying auditory TOJ. In both studies we observed a topographic modulation as a function of TOJ performance at ~40ms after the onset of the first sound, indicating the engagement of distinct configurations of intracranial generators. Source estimations in the first study revealed a bilateral PSR activity for both accurate and inaccurate TOJ trials. Moreover, activity within left, but not right, PSR correlated with TOJ performance. Source estimations in the second study revealed a training-induced left lateralization of the initial bilateral (i.e. PSR) brain response. Moreover, the activity within the left PSR region correlated with TOJ performance.Based on these results, we suggest that a "temporal stamp" is established within left PSR on the first sound within the pair at early stages (i.e. ~40ms) of cortical processes, but is critically modulated by inputs from right PSR (Bernasconi et al., 2010a; b). The "temporal stamp" on the first sound may be established via a sensory gating or prior entry mechanism.Behavioral and brain responses to identical stimuli can vary due to attention modulation, vary with experimental and task parameters or "internal noise". In a fourth experiment (Bernasconi et al., 2011b) we investigated where and when "neural noise" manifest during the stimulus processing. Contrasting the AEPs of identical sound perceived as High vs. Low pitch, a topographic modulation occurred at ca. 100ms after the onset of the sound. Source estimation revealed activity within regions compatible with pitch discrimination. Thus, we provided neurophysiological evidence for the variation in perception induced by "neural noise".ABSTRACT (French)Un traitement précis de l'ordre des événements sensoriels sur une échelle de temps de milliseconde est crucial pour les fonctions sensori-motrices et cognitives. Les tâches de jugement d'ordre temporel (JOT), consistant à présenter plusieurs stimuli en succession rapide, sont traditionnellement employées pour étudier les mécanismes neuronaux soutenant le traitement d'informations sensorielles qui varient rapidement. Le but de cette thèse est d'étudier le mécanisme cérébral soutenant JOT. Dans les trois études présentées nous nous sommes concentrés sur les états du cerveau précédant la présentation des stimuli de JOT, les bases neurales pour un JOT correct vs. incorrect et sur la possibilité et les moyens d'améliorer l'exécution du JOT grâce à un entraînement.Dans "Pre-stimulus beta oscillations within left posterior sylvian regions impact auditory temporal order judgment accuracy" (Bernasconi et al., 2011),, nous nous sommes intéressé à savoir si l'activité oscillatoire du cerveau au pré-stimulus modulait la performance du JOT. Nous avons contrasté l'activité électrophysiologique en fonction de la performance TOJ, mesurant une activité oscillatoire beta au pré-stimulus plus fort dans la région sylvian postérieure gauche (PSR) liée à un JOT correct.Dans "Interhemispheric coupling between the posterior sylvian regions impacts successful auditory temporal order judgment" (Bernasconi et al., 2010a), et "Plastic brain mechanisms for attaining auditory temporal order judgment proficiency" (Bernasconi et al., 2010b), nous avons étudié la dynamique spatio-temporelle dans le cerveau impliqué dans le traitement du JOT auditif. Dans ses deux études, nous avons observé une modulation topographique à ~40ms après le début du premier son, en fonction de la performance JOT, indiquant l'engagement des configurations de générateurs intra- crâniens distincts. La localisation de source dans la première étude indique une activité bilatérale de PSR pour des JOT corrects vs. incorrects. Par ailleurs, l'activité dans PSR gauche, mais pas dans le droit, est corrélée avec la performance du JOT. La localisation de source dans la deuxième étude indiquait une latéralisation gauche induite par l'entraînement d'une réponse initialement bilatérale du cerveau. D'ailleurs, l'activité dans la région PSR gauche corrèlait avec la performance de TOJ.Basé sur ces résultats, nous proposons qu'un « timbre-temporel » soit établi très tôt (c.-à-d. à ~40ms) sur le premier son par le PSR gauche, mais module par l'activité du PSR droite (Bernasconi et al., 2010a ; b). « Le timbre- temporel » sur le premier son peut être établi par le mécanisme neuronal de type « sensory gating » ou « prior entry ».Les réponses comportementales et du cerveau aux stimuli identiques peut varier du à des modulations d'attention ou à des variations dans les paramètres des tâches ou au bruit interne du cerveau. Dans une quatrième expérience (Bernasconi et al. 2011B), nous avons étudié où et quand le »bruit neuronal« se manifeste pendant le traitement des stimuli. En contrastant les AEPs de sons identiques perçus comme aigus vs. grave, nous avons mesuré une modulation topographique à env. 100ms après l'apparition du son. L'estimation de source a révélé une activité dans les régions compatibles avec la discrimination de fréquences. Ainsi, nous avons fourni des preuves neurophysiologiques de la variation de la perception induite par le «bruit neuronal».

Pohjaöljyn käsittely

Diplomityön tarkoituksena oli tutkia Naantalin jalostamolle soveltuvaa pohjaöljyn käsittely-yksikköä syntyvän raskaan polttoöljyn määrän vähentämiseksi. Kirjallisuusosassa tutkittiin eri prosessivaihtoehtoja pohjaöljyn käsittelylle. Prosesseista selvitettiin käytettävät syötöt, prosessiolosuhteet, saatavat tuotteet ja niiden saannot sekä prosessin investointi- ja käyttökustannukset. Lisäksi tutkittiin tuotteiden käyttökohteita ja niiden vaatimia jatkokäsittelyjä. Työn tutkimusosassa valittiin tarkasteltavaksi prosessiksi ylikriittinen uutto, deasfaltointi. Työssä tarkasteltiin uuttoyksikön eri kytkentävaihtoehtoja Naantalin jalostamolle ja valittiin käytettävät uuttoprosentit ja liuottimet. Yksiköstä saataville tuotteille laskettiin aineominaisuudet. Deasfaltoidun öljyn käsittelyyn suunnitelluille katalyyttisille krakkausyksiköille tehtiin saantoarviot ja laskettiin massataseet. Deasfaltointiyksikön pohjatuotteena saatavan asfalteenirikasteen jatkokäsittelyssä tutkittiin bitumin, raskaan ja erikoisraskaan polttoöljyn sekä bitumikomponentin valmistusta. Vaihtoehdoista laskettiin massataseet ja tuotteiden aineominaisuudet. Prosessivaihtoehdoista tehtiin kannattavuustarkastelu vuotuisten käyttökatteiden perusteella, joita verrattiin nykyiseen jalostamorakenteeseen perustuvaan perus-tapaukseen. Lopuksi tehtiin yhteenveto ja annettiin ehdotuksia jatkotutkimuksille.

Uuteaineiden on-line-mittaus koivusulfaattisellutehtaalla

Tämän työn tarkoituksena oli tutkia pihkanhallintaa sulfaattisellutehtaalla ja uuteaineiden analysointimenetelmiä massasta ja suodoksesta. Tavoitteena oli kehittää uuteaineiden on-line mittausmenetelmä sulfaattisellutehtaalle. Kirjallisuusosassa esitettiin sulfaattisellun valmistusprosessi ja uuteaineiden käyttäytyminen prosessissa. Lisäksi työssä käsiteltiin tärkeimpiä pihkanhallintamenetelmiä ja uuteaineiden analysointia. Kokeellisessa osassa määritettiin uuteainepitoisuudet 29:stä massa- ja pesusuodosnäytteestä. Lisäksi suodosnäytteiden sameus ja kemiallinen hapenkulutus määritettiin laboratoriossa. On-line mittaukset tehtiin DD-pesurin paluusuodoksesta, josta mitattiin johtokyky, lämpötila, taitekerroin ja pH. Sameutta yritettiin mitata on-line nefelometrillä, mutta käytössä ollut laite ei soveltunut tumman suodoksen mittaamiseen. Työssä saatujen tulosten perusteella voidaan todeta, että pesusuodoksen ominaisuuksia mittaamalla ei voida arvioida massan uutepitoisuutta luotettavasti. Suodoksen ja massan uutepitoisuuksien välinen selitysaste oli 54%. Saippuoitumattomien uuteaineiden pitoisuuden ollessa erityisen suuri, suodoksen uutepitoisuus ei korreloi massassa olevan uutteen määrän kanssa. Täten kyseinen mittausmenetelmä ei ole sopiva, sillä se ei toimi silloin, kun olisi tärkeintä tietää oikea uuteainepitoisuus pihkanhallintakemikaalien annosten määrittämiseksi. Suodoksen sameus riippui sen uutepitoisuudesta 80% selitysasteella. Sameusmittaus on nopea ja suhteellisen luotettava menetelmä suodosten uutepitoisuuksien arviointiin, mutta se vaatii mittalaitteen joka käyttää usean ilmaisimen tekniikkaa. On-line-mittauksissa laitteisto tulisi varustaa automaattisella pesulaitteella, sillä mittarin linssit likaantuvat helposti prosessivirrassa.

The Paleozoic magmatic history of the Maggia and Sambuco nappes, Lower Penninic, Central Lepontine Alps

Résumé : Les corps magmatiques sont des indicateurs essentiels dans toute reconstitution paléogéographique et/ou géodynamique d'un cycle orogénique, en particulier en contexte polycyclique, où la plupart des autres indices ont été oblitérés. Ils sont aisément datables et leurs caractéristiques géochimiques permettent de contraindre leur contexte tectonique de mise en place. Cette approche a été appliquée aux socles pré-mésozoïques des nappes penniques inférieures de Sambuco et de la Maggia, dans les Alpes centrales lepontines. Plusieurs événements magmatiques ont été identifiés dans le socle de Sambuco et datés par la méthode U-Pb sur zircon couplée à la technique LA-ICPMS. La suite calco-alcaline mafique rubanée de Scheggia est datée du Cambrien inférieur à 540-530 Ma ; le métagranite alumineux oeillé de Sasso Nero a un âge de 480-470 Ma, tout comme bien d'autres «older orthogneisses» des socles alpins. Il contient des zircons hérités d'âge panafricain à 630-610 Ma, indicateur d'une affiliation gondwanienne de ces terrains. Le pluton calco-alcalin du Matorello est daté à environ 300-310 Ma, et les filons lamprophyriques qu'il abrite à 300 Ma. La granodiorite de Cocco et le leucogranite de Ruscada, tous deux intrudés dans le socle de la nappe adjacente de la Maggia, ont des âges similaires à celui du Matorello. Ceci ajouté aux similitudes magmatiques observées entre Cocco et Matorello suggère une proximité paléogéographique des deux nappes au Permien-Carbonifère. Or ces dernières sont actuellement considérées appartenir à deux domaines paléogéographiques mésozoïques distincts : helvétique pour Sambuco et briançonnais pour Maggia, séparés par un bassin océanique. Si tel fut le cas, aucun mouvement décrochant ne doit avoir décalé les marges continentales de l'océan, retrouvées en parfaite coïncidence lors de sa fermeture. Le Matorello est un pluton recristallisé en faciès amphibolite et plissé par cinq phases successives de déformation non-coaxiales, qui ont conduit à son renversement complet, attesté par des indicateurs de paléogravité. Il préserve de spectaculaires phénomènes de coexistence liquide de magmas (essaims d'enclaves et Bills composites). Ce pluton était originellement tabulaire, construit par l'accumulation de multiples injections de magma en feuillets d'épaisseur métrique à décamétrique. Suivant le rythme de mise en place, les injections successives ont rapidement cristallisé avec des contours nets et bien définis (Bills composites) ou se sont mélangées avec les précédentes pour former une couche non consolidée de plusieurs dizaines de mètres d'épaisseur (granodiorite principale). Les injections individuelles sont délimitées par de subtils contrastes en granulométrie, proportions modales ou ségrégation de minéraux (schlieren), ou par des phénomènes d'érosion le long des surfaces de contact. Deux couches métriques à contour sinueux consistent en une accumulation compacte d'enclaves mafiques arrondies dans une matrice granodioritique fine. Le granoclassement des enclaves, la présence de figures de charge et de phénomènes érosifs en base de couche, ainsi que des schlieren de biotite entrecroisés évoquent l'injection de coulées de magma chargé d'enclaves et de faible viscosité en régime hydrodynamique turbulent dans un encaissant granodioritique encore largement liquide. La nature hybride des roches implique une chambre magmatique sous-jacente, en cours de différenciation et périodiquement réalimentée. Les magmas sont des liquides mafiques dérivés du manteau et des liquides anatectiques d'origine crustale, comme l'indique la gamme mesurée des rapports isotopiques initiaux du Sr (0.704 à 0.709) et des valeurs epsilon Nd (-2.1 à -4.7). Ces données montrent également que la contribution crustale est dominante, en accord avec les isotopes du plomb. Les phénomènes d'hybridation ont vraisemblablement eu lieu en base de croûte et dans la chambre magmatique sous-jacente au laccolite du Matorello. Les indicateurs de paléogravité du Matorello contribuent accessoirement à la compréhension de l'architecture actuelle de la nappe de Sambuco. Des plis isoclinaux à surface axiale verticale peuvent être mis en évidence par le contact entre les faciès dioritique et granodioritique. L'antiforme dont le Matorello forme le coeur est un synclinal, ce qui le positionne dans le Flanc inverse du grand pli couché que forme la nappe de Sambuco. Par ailleurs, des blocs de gneiss retrouvés dans le wildflysch sommital de la couverture de la nappe d'Antigorio ont été affiliés dans cette étude au pluton du Matorello. Ceci implique que le front de la nappe de Sambuco chevauchait déjà la partie est du bassin d'Antigorio au moment de sa fermeture. Par conséquent, ce n'est qu'en position externe que la nappe du Lebendun chevauche directement la nappe d'Antigorio. Abstract Magmatic bodies are important markers in paleo-geographic or geodynamic reconstructions of orogenic cycles, even more so in the case of polycyclic events where many of the other markers have been overwritten or destroyed. Plutons are relatively easy to date and their geochemical properties help constrain the tectonic context in which they were emplaced. This study focuses on the pre-mesozoic basement in the Sambuco and Maggia lower Penninic nappes located in the central Lepontine domain of the Alps. A number of magmatic events have been identified in the Sambuco basement. These events were dated using LA-ICPMS U/Pb on zircon grains. The mafic calc-alkaline banded Scheggia suite is dated as lower Cambrian, 540-530 Ma. The Al-rich Sasso-Nero lenticular gneiss is 480-470 Ma old (similarly to many older orfhogneisses of the Alpine basement) and contains 630-610 Ma old pan-African inherited zircons that illustrate the Gondwanian origin of these terranes.The calc-alkaline Matorello pluton is dated as 310-300 Ma whereas the lamprophyric bodies it contains are of 300 Ma. The Cocco granodiorite and the Ruscada leucogranite both intrude the basement of the adjacent Maggia nappe and are of similar ages to the Matorello. The ages as well as the geochemical similarities between the Cocco, Rucada and Matorello plutons suggest their paleo-geographic proximity at the Permian-Carboniferous boundary. However, these nappes are currently considered as belonging to two different Mesozoic paleo-geographic domains. Indeed, the Sambuco is considered as Helvetic whereas the Maggia is said to be Briançonnais, both separated by an oceanic basin. If this is the case, then it is essential that nostrike-slip movement has misaligned both continental margins since these coincide perfectly now that the oceanic domain closed. The Matorello pluton was originally a tabular intrusion, built up by the accumulation of multiple, several meter-thick, subhorizontal sheet-like injections of magma. Depending on their emplacement rate, the successive magma injections either solidified rapidly with sharp and rather well-defined boundaries (like the composite sills) or mingled with previous injections generating a thick molten layer up to several tens to hundred meters thick, like in the main granodioritic facies. These coalesced injections are hardly distinguishable, however subtle contrasts in granulometry, mineral modal proportions or mineral sorting (cross-bedded biotite-rich schlieren), as well as erosional features and/or crystal entrapment along contact surfaces allow to distinguish between the different injections. Two exceptional meter-thick layers display sinuous boundaries with the host granodiorite and consist of a densely packed accumulation of mafic enclaves in a granodioritic matrix. Gravitational sorting of the enclaves with load cast features at the base of the layers and sinuous biotite schlieren point to injection of low viscosity turbulent composite magma flows in the still largely molten granodiorite host. The hybrid nature of these rocks implies the existence of á periodically replenished and differentiated underlying magma chamber. Magmas are mafic liquids derived from the mantle and anatectic liquids of crustal origin, as shown by the (87Sr/86Sr), and epsilon Nd values (0.704-0.709 and -2.1 to -4.7 respectively. These data show that the crustal contribution is important, as confirmed by the Pb isotopes. The hybridisation processes seem to have occurred in the lower crust in magma chambers underlying the Matorello laccolith. The paleo-gravity markers in the Matorello help understand the architecture of the Sambuco nappe. Isoclinal folds with a vertical axial plane can be seen at the contact between dioritic and granodioritic facies. The antiform structure of which the Matorello is the heart is in fact a syncline. This places it in the inverse flanc of the large recumbent fold that constitutes the Sambuco nappe. The gneiss blocs found in the summital wildflysh cover of the Antigorio nappe have been linked to the Matorello pluton. This means that the front of the Sambuco nappe already overlapped the Antigorio basin when it closed. This implies that the Lebendun nappe can only overlap the Antigorio nappe in it's external position. Résumé grand public La chaîne alpine est la conséquence de la collision tertiaire entre deux masses continentales, l'Europe au nord et la péninsule apulienne africaine au sud, originellement séparées par l'océan mésozoïque téthysien. Cette collision a fermé un espace large de plusieurs centaines de km avec pour résultat l'écaillage de la croûte terrestre en unités tectoniques de dimensions variables, qui se sont empilées, imbriquées, éventuellement replissées en nappes de géométrie complexe. Cet amoncellement de 40 km d'épaisseur a vu sa température et sa pression lithostatique internes augmenter jusqu'à des valeurs de l'ordre de 680 °C et 6000 bars, induisant une recristallisation métamorphique des roches. L'un des objectifs de la géologie alpine est de reconstituer la géographie de la région aux temps mésozoïques de l'océan téthysien, en d'autres termes, de replacer chacune des unités tectoniques identifiées au sein de l'empilement alpin dans sa position originelle. Le défi est de taille et peut être comparé à celui de la reconstitution d'un vaste puzzle, dont certaines pièces seraient endommagées au niveau de leur contour ou leurs couleurs (métamorphisme), dissimulées par d'autres (enfouissement), voire tombées de la table de jeu (subduction, échappement latéral). Plusieurs approches ont été mises en oeuvre au cours du siècle écoulé. On citera en particulier la stratigraphie, la tectonique et le paléomagnétisme. Dans ce travail, nous avons essentiellement utilisé des techniques de datation isotopique absolue des roches (U/Pb sur zircon) qui, sur la base des connaissances acquises par l'ensemble des autres disciplines géologiques, nous ont permis de mieux contraindre ta paléogéographie mésozoïque du domaine «pennique inférieur » des Alpes centrales lépontines. Et au-delà? Nous savons tous que la disposition des continents à la surface de la Terre évolue constamment. Il est donc tentant d'essayer de remonter plus loin encore dans le temps et de reconstituer la physionomie de la marge sud européenne, tout au moins certains éléments de son histoire, au cours de l'ère paléozoïque. Les traces de ces événements très anciens sont naturellement ténues et dans ce contexte, les techniques de datation mentionnées ci-dessus deviennent les outils les plus performants. Ainsi, des datations u/Pb sur zircon nous ont permis de recenser plusieurs intrusions magmatiques, attribuées à quatre événements orogéniques anté-alpins. Des âges néoprotérozoïques (630-610 millions d'années ou Ma), cambrien inférieur (540-530 Ma), ordovicien inférieur (480-470 Ma) et carbonifère supérieur-permien inférieur (310-285 Ma) ont été obtenus dans le socle de la nappe de Sambuco. Des âges similaires à 300 Ma ont été obtenus dans la nappe voisine de la Maggia, qui permettent de relier ces deux unités. Aujourd'hui côte à côte, ces deux nappes devaient également se trouver proches l'une de l'autre il y a 300 Ma, lors de l'extension post-varisque. Les structures magmatiques spectaculaires préservées dans le pluton du Matorello (300 Ma) contraignent la géométrie actuelle de la nappe de Sambuco dans laquelle l'intrusion s'est mise en place. La forme originelle du pluton, aujourd'hui retourné et replissé plusieurs fois, s'avère être tabulaire, faite d'intrusions de faible épaisseur (1-300 m) s'étalant en forme de disque (30m à 2 km de diamètre). Les injections successives de magma se sont accumulées sous un toit dioritique précoce; elles sont issues, par le refais de fractures, d'une chambre magmatique plus profonde, périodiquement réalimentée par des magmas calco-alcalins d'origine mantellique contaminés parla croûte continentale profonde (εNd = -2.1 à -4.7). Des accumulations d'enclaves magmatiques arrondies et granoclassées dans des paléo-chenaux à fond érosif témoignent de conditions de mise en place hydrodynamiques à haute énergie. Ces enclaves sont emmenées de la chambre magmatique sous-jacente à la faveur d'épisodes de fracturation hydraulique liés à l'injection de magmas matelliques chauds dans des liquides différenciés riches en eau. Cette hypothèse est étayée par l'existence de filons composites. Une paléohorizontale a pu être déduite au sein du pluton, indiquant que cette partie de la nappe de Sambuco est verticalisée et isoclinalement replissée par la déformation alpine. Finalement, des blocs érodés du socle Sambuco ont été retrouvés dans le wildflysch sommital de la couverture sédimentaire mésozoïque de la nappe d'Antigorio sous-jacente. Ceci suggère que les blocs ont été fournis parle front de la nappe de Sambuco en train de chevaucher sur la nappe d'Antigorio au moment de la fermeture du bassin sédimentaire de cette dernière.