Redes interorganizacionais e inovação: o caso do pólo joalheiro de Belém

This work is a case study based on Belém Jewelry Pole, whose main issue is to understand how the social network (which the Pole is inserted) influences on innovation process on this area. The main objective is to analyze how interorganizational networks impacted/impact on the potential for innovation, creating both limits and opportunities for the companies development. The adopted method analyzed the historical jewelry industry trajectory since the beginning of mineral extraction in the city of Itaituba (in the Pará State) until nowadays. Primary and secondary data were used allowing the view of the dynamics of the network during transformation periods of the main involved actors in the process. The prospect of embeddedness structural as analysis technique allowed verifying the quality of interactors ties, as well as the visualization of their structures. During the jewelry industry trajectory was verified a change in the quality of social relations, modifying the information flow, trust and associations of various links in the production chain. Both direct and indirect ties facilitated the access to remote networks entering new information related to new products, processes and market aspects. This interaction has led to raising the innovation potential causing a qualitative and quantitative improvement in competitiveness of organizations. Some embedded ties allowed the formation of partnerships bringing various economic earnings for those involved in the relationship. Thus, it is understood how aspects related to the position, architecture and quality of ties in a wide social network influenced on the innovation process and eventual jewelry industry trajectory

Redes interorganizacionais e inovação: o caso do pólo joalheiro de Belém

This work is a case study based on Belém Jewelry Pole, whose main issue is to understand how the social network (which the Pole is inserted) influences on innovation process on this area. The main objective is to analyze how interorganizational networks impacted/impact on the potential for innovation, creating both limits and opportunities for the companies development. The adopted method analyzed the historical jewelry industry trajectory since the beginning of mineral extraction in the city of Itaituba (in the Pará State) until nowadays. Primary and secondary data were used allowing the view of the dynamics of the network during transformation periods of the main involved actors in the process. The prospect of embeddedness structural as analysis technique allowed verifying the quality of interactors ties, as well as the visualization of their structures. During the jewelry industry trajectory was verified a change in the quality of social relations, modifying the information flow, trust and associations of various links in the production chain. Both direct and indirect ties facilitated the access to remote networks entering new information related to new products, processes and market aspects. This interaction has led to raising the innovation potential causing a qualitative and quantitative improvement in competitiveness of organizations. Some embedded ties allowed the formation of partnerships bringing various economic earnings for those involved in the relationship. Thus, it is understood how aspects related to the position, architecture and quality of ties in a wide social network influenced on the innovation process and eventual jewelry industry trajectory

Older adults and sport and physical activity professionals in spain

Presence of monitors in physical activities and sports practiced by adults older than 64 years of age in Spain is analyzed in this research. The objective of this study is to determine the existence of monitors in relation to the sociodemographic features of older adults, the size of municipalities, the activities practiced, and the organizations where they are performed. The methodology used included a cross-sectional survey applied to a sample of older adults in Spain. The most relevant conclusions are that the presence of monitors in physical activities and sports practiced by older adults is dominant (63.8%), hence, their importance, and that the presence of monitors is higher for women (81.3%) than for men (37.5%). In addition, it is concluded that the bigger the municipality the higher the tendency to have more instructors. Regarding the type of activity, wide diversification is obtained; finally, there is a larger presence of monitors in sports entities (87.5%) and nursing homes (79.5%).

Prediction of mode I delamination resistance of z-pinned laminates using the embedded finite element technique

A new finite modelling approach is presented to analyse the mode I delamination fracture toughness of z-pinned laminates using the computationally efficient embedded element technique. In the FE model,each z-pin is represented by a single one-dimensional truss element that is embedded within the laminate. Each truss is given the material, geometric and spatial properties associated with the global crackbridging traction response of a z-pin in the laminate; this simplification provides a computationally efficient and flexible model where pin elements are independent of the underlying structural mesh for thelaminate. The accuracy of the FE modelling approach is assessed using mode I interlaminar fracture toughness data for a carbon-epoxy laminate reinforced with z-pins made of copper, titanium or stainless steel. The model is able to predict with good accuracy the crack growth resistance curves and fracture toughness properties for the different types of z-pinned laminate.

Direct Write Fabrication of Waveguides and Interconnects for Optical Printed Wiring Boards

Current copper based circuit technology is becoming a limiting factor in high speed data transfer applications as processors are improving at a faster rate than are developments to increase on board data transfer. One solution is to utilize optical waveguide technology to overcome these bandwidth and loss restrictions. The use of this technology virtually eliminates the heat and cross-talk loss seen in copper circuitry, while also operating at a higher bandwidth. Transitioning current fabrication techniques from small scale laboratory environments to large scale manufacturing presents significant challenges. Optical-to-electrical connections and out-of-plane coupling are significant hurdles in the advancement of optical interconnects. The main goals of this research are the development of direct write material deposition and patterning tools for the fabrication of waveguide systems on large substrates, and the development of out-of-plane coupler components compatible with standard fiber optic cabling. Combining these elements with standard printed circuit boards allows for the fabrication of fully functional optical-electrical-printed-wiring-boards (OEPWBs). A direct dispense tool was designed, assembled, and characterized for the repeatable dispensing of blanket waveguide layers over a range of thicknesses (25-225 µm), eliminating waste material and affording the ability to utilize large substrates. This tool was used to directly dispense multimode waveguide cores which required no UV definition or development. These cores had circular cross sections and were comparable in optical performance to lithographically fabricated square waveguides. Laser direct writing is a non-contact process that allows for the dynamic UV patterning of waveguide material on large substrates, eliminating the need for high resolution masks. A laser direct write tool was designed, assembled, and characterized for direct write patterning waveguides that were comparable in quality to those produced using standard lithographic practices (0.047 dB/cm loss for laser written waveguides compared to 0.043 dB/cm for lithographic waveguides). Straight waveguides, and waveguide turns were patterned at multimode and single mode sizes, and the process was characterized and documented. Support structures such as angled reflectors and vertical posts were produced, showing the versatility of the laser direct write tool. Commercially available components were implanted into the optical layer for out-of-plane routing of the optical signals. These devices featured spherical lenses on the input and output sides of a total internal reflection (TIR) mirror, as well as alignment pins compatible with standard MT design. Fully functional OEPWBs were fabricated featuring input and output out-of-plane optical signal routing with total optical losses not exceeding 10 dB. These prototypes survived thermal cycling (-40°C to 85°C) and humidity exposure (95±4% humidity), showing minimal degradation in optical performance. Operational failure occurred after environmental aging life testing at 110°C for 216 hours.

DESIGN AND APPLICATION OF WIRELESS PASSIVE MAGNETOELASTIC RESONANCE AND MAGNETOHARMONIC FORCE SENSORS

The objective of the work described in this dissertation is the development of new wireless passive force monitoring platforms for applications in the medical field, specifically monitoring lower limb prosthetics. The developed sensors consist of stress sensitive, magnetically soft amorphous metallic glass materials. The first technology is based on magnetoelastic resonance. Specifically, when exposed to an AC excitation field along with a constant DC bias field, the magnetoelastic material mechanically vibrates, and may reaches resonance if the field frequency matches the mechanical resonant frequency of the material. The presented work illustrates that an applied loading pins portions of the strip, effectively decreasing the strip length, which results in an increase in the frequency of the resonance. The developed technology is deployed in a prototype lower limb prosthetic sleeve for monitoring forces experienced by the distal end of the residuum. This work also reports on the development of a magnetoharmonic force sensor comprised of the same material. According to the Villari effect, an applied loading to the material results in a change in the permeability of the magnetic sensor which is visualized as an increase in the higher-order harmonic fields of the material. Specifically, by applying a constant low frequency AC field and sweeping the applied DC biasing field, the higher-order harmonic components of the magnetic response can be visualized. This sensor technology was also instrumented onto a lower limb prosthetic for proof of deployment; however, the magnetoharmonic sensor illustrated complications with sensor positioning and a necessity to tailor the interface mechanics between the sensing material and the surface being monitored. The novelty of these two technologies is in their wireless passive nature which allows for long term monitoring over the life time of a given device. Additionally, the developed technologies are low cost. Recommendations for future works include improving the system for real-time monitoring, useful for data collection outside of a clinical setting.

Mcardle disease: Update of reported mutations and polymorphisms in the Pygm gene

McArdle disease is an autosomal recessive disorder caused by inherited deficiency of the muscle isoform of glycogen phosphorylase (or ‘myophosphorylase´), which catalyzes the first step of glycogen catabolism, releasing glucose-1-phosphate from glycogen deposits. As a result, muscle metabolism is impaired, leading to different degrees of exercise intolerance. Patients range from asymptomatic to severely affected, including in some cases limitations in activities of daily living. The PYGM gene codifies myophosphoylase and to date 147 pathogenic mutations and 39 polymorphisms have been reported. Exon 1 and 17 are mutational hot-spots in PYGM and 50% of the described mutations are missense.

Caracterización de las condiciones de salud y de trabajo y su relación con lesiones cutáneas en los orfebres artesanales de Mompox Bolivar-Colombia 2015

INTRODUCCIÓN Las alteraciones de la salud relacionadas con el trabajo (enfermedades y accidentes), pueden prevenirse desde las actividades bien enfocadas del Sistema de Gestión de Seguridad y Salud en el Trabajo (SGSST), realizando la identificación y control de los agentes causales en el ambiente de trabajo y la vigilancia de la salud de la población trabajadora. El proyecto desarrollado va dirigido a un grupo específico de artesanos orfebres en la ciudad de Mompox, Bolivar, en la que esta labor artesanal se centra en el arte de la filigrana, transmitido generacionalmente desde antaño En esta ciudad los artesanos orfebres, aunque corresponden a un sector informal de la economía, se encuentran agremiados principalmente en tres asociaciones ubicadas en la cabecera municipal. En el desempeño de sus labores, estos profesionales del arte de la filigrana manipulan agentes químicos como el ácido nítrico, el ácido sulfúrico, la plata y el mercurio, los cuales se utilizan en las diferentes etapas del proceso que incluye técnicas propias de esta labor. Teniendo en cuenta que la información disponible en la literatura científica describe principalmente los efectos de agentes químicos en otros oficios diferentes a la población orfebre y conociendo que la exposición a estas sustancias químicas puede generar variados efectos en el organismo, el interés de este proyecto se centra específicamente en las alteraciones cutáneas posiblemente relacionadas con las condiciones de trabajo de esta población del sector informal. MATERIALES Y METODOS La presente investigación es un estudio de corte trasversal, el cual realizó una selección por conveniencia de 114 trabajadores de orfebres Momposinos con el fin de identificar la relación de las condiciones de trabajo con la presencia de alteraciones cutáneas de los trabajadores que laboran en la orfebrería artesanal en la ciudad de Mompox, departamento de Bolívar, en el año 2015, de tal manera que dejando a consideración la descripción de los hallazgos encontrados, se posibiliten futuras y precisas investigaciones e intervenciones en este colectivo de trabajadores. Los instrumentos empleados para la recolección de la información y para el cumplimento de los objetivos fueron la encuesta Nacional de Condiciones de Trabajo del Instituto Nacional de Seguridad e Higiene en el trabajo de España (INSHT) que permite recolectar información sobre la caracterización de la población a nivel sociodemográfico y ocupacional, y para la determinación de patologías dermatológicas relacionadas con el trabajo se utilizó el Cuestionario NOSQ-2002 Nórdico- Enfermedades Cutáneas de origen Laboral, en su versión validada en español. Se describieron las variables categóricas con porcentajes y las continuas (cuantitativas) con medidas de tendencia central y dispersión La asociación entre los hallazgos de exposición ocupacional y los síntomas y signos en piel, fue estimada mediante riesgos relativos. RESULTADOS El 75,4% del total de la población correspondió al género masculino y el 67,5% reportó realizar sus labores como trabajadores independientes. Respecto a la identificación de condiciones de salud, la percepción por parte de los orfebres fue positiva, reportando muy buena salud en el 34% de los mismos. El 8% de la población manifestó alteraciones dermatológicas tipo eczema en los últimos seis meses y el 11% las presentó principalmente en manos. Respecto de la iniciación del eczema, el 97% de los trabajadores reportó que se iniciaba al contacto con sustancias químicas y el 98,7% manifestó que se encontraban realizando la labor de orfebrería cuando inició el eczema. La lesión prevalente fue mancha roja sin edema (8%), seguida de ronchas o manchas y ampollas pequeñas (3%) y de piel seca con escamas (2%). CONCLUSIONES Los resultados de la presente investigación mostraron la prevalencia de alteraciones cutáneas principalmente en las manos, tipo eczema (manchas rojas) o prurito (picor). Se recomienda la disminución de los tiempos de exposición, adecuación de jornadas y tiempos de descanso, sistemas de protección personal adecuados y la implementación de un programa de educación y participación para el control integral del riesgo.

Subsídios para a joalharia contemporânea em Portugal

Para se efectuar a investigação sobre a joalharia portuguesa contemporânea, a partir de 1950, procedeu-se ao seu enquadramento histórico e geográfico. À semelhança do que se verificava resto do mundo, constata-se uma interdisciplinaridade com as restantes artes plásticas (em especial com o design). E consequente alteração das formas, materiais e técnicas anteriormente usadas. Também ao nível da função da jóia se observaram alterações. Foi, então, estudada a relação da joia com o corpo. Portugal conta com um conjunto de artistas joalheiros em plena produção. Existem estruturas de ensino e profissionais, sem, contudo, haver um museu de joalharia contemporânea. Mesmo assim, é de notar o elevado número de exposições e projectos relacionados com esta temática. Neste panorama, surge uma joalharia contemporânea liberta de uma identidade, que permite que o trabalho de cada artista seja singular, sem obedecer a regras limitativas ou castradoras da criatividade. /ABSTRACT: It was during the 50s that in order to carry out the research on the contemporary portuguese jewellery, one had to establish its historical and geographical approach. As it happened in the rest of the world, one may say there was an interdisciplinary with the other fine arts (specially with the design) and the consequent change in the shapes, materials and techniques previously used. The jewel was not an exception to these changes as far its function is concerned. Due to these factors, the relationship between the jewel and the body started to be studied. Nowadays Portugal counts a set of jewelers in full production. There are specialized schools in this area as well as professionals although there isn't a museum of contemporary jeweler. ln spite of this, a huge number of exhibitions and projects concerning this area, take place in Portugal. Taking all these aspects into consideration, a free contemporary jewelry is emerging, allowing the work of each artist may be unique without obeying to any strict or limitative rules that could work as a barrier to their creativity.