Indian Patent Policy and Publich Health : implications from the Japanese Experience

The introduction of pharmaceutical product patents in India and other developing countries is expected to have a significant effect on public health and local pharmaceutical industries. This paper draws implications from the historical experience of Japan when it introduced product patents in 1976. In Japan, narrow patents and promotion of cross-licensing were effective tools to keep drug prices in check while ensuring the introduction of new drugs. While the global pharmaceutical market surrounding India today differs considerably from that of the 1970's, the Japanese experience offers a policy option that may profitably be considered by India today. The Indian patent system emphasizes the patentability requirement in contrast to the Japanese patent policy which relied on narrow patents and extensive licensing. R&D by local firms and the development of local products may be promoted more effectively under the Japanese model.

Who Develops Innovations in Medicine for the Poor? Trends in Patent Applications Related to Medicines for HIV/AIDS, Tuberculosis, Malaria and Neglected Diseases

Who invents medicines for the poor of the world? This question becomes very important where the WTO allows low income countries to be unbound by the TRIPS agreement. This agreement concerns medicines for infectious diseases such as HIV/AIDS, tuberculosis and malaria. These diseases cause serious damage to low income countries. Under these circumstances, some scholars wonder if anyone will continue innovative activities related to treating these diseases. This paper sought to answer this question by collecting and analyzing patent data of medicines and vaccines for diseases using the database of the Japan Patent Office. Results indicate that private firms have led in innovation not only for global diseases such as HIV/AIDS but also diseases such as malaria that are spreading exclusively in low income countries. Innovation for the three infectious diseases is diverse among firms, and frequent patent applications by high-performing pharmaceutical firms appear prominent even after R&D expenditure, economies of scale, and economies of scope are taken into account.

Patent policy and public health in developing countries: lessons from Japan

The introduction of pharmaceutical product patents in India and other developing countries is expected to have a significant effect on public health and local pharmaceutical industries. This paper draws implications from the historical experience of Japan when it introduced product patents in 1976. In Japan, narrow patents and promotion of cross-licensing were effective tools to keep drug prices in check while ensuring the introduction of new drugs. While the global pharmaceutical market surrounding India today differs considerably from that of the 1970's, the Japanese experience offers a policy option that may profitably be considered by India today. The Indian patent system emphasizes the patentability requirement in contrast to the Japanese patent policy which relied on narrow patents and extensive licensing. R&D by local firms and the development of local products may be promoted more effectively under the Japanese model.

Innovation networks in China, Japan, and Korea : evidence from Japanese patent data

The growing importance of innovation in economic growth has encouraged the development of innovation capabilities in East Asia, within which China, Japan, and Korea are most important in terms of technological capabilities. Using Japanese patent data, we examine how knowledge networks have developed among these countries. We find that Japan's technological specialization saw little change, but those of Korea and China changed rapidly since 1970s. By the year 2009, technology specialization has become similar across three countries in the sense that the common field of prominent technology is "electronic circuits and communication technologies". Patent citations suggest that technology flows were largest in the electronic technology, pointing to the deepening of innovation networks in these countries.

Innovation networks in China, Japan, and Korea : further evidence from U.S. patent data

The growing importance of innovation in economic growth has encouraged the development of innovation capabilities in East Asia, within which China, Japan, and Korea are most important in terms of technological capabilities. Using U.S. patent data, we examine how knowledge networks have developed among these countries. We find that Japan's technological specialization saw gradual changes, but those of Korea and China changed rapidly since 1970s. By the year 2009, technology specialization has become similar across three countries in the sense that the common fields of prominent technology are electronics and semiconductors. Patent citations suggest that technology flows were largest in the electronics technology, pointing to the deepening of innovation networks in these countries. Together with our prior work, the Japanese and U.S. data produce similar conclusions about innovation networks.

Adjustment methods of national input-output tables for harmonized and consistent multi-regional input-output databases

Despite the fact that input–output (IO) tables form a central part of the System of National Accounts, each individual country's national IO table exhibits more or less different features and characteristics, reflecting the country's socioeconomic idiosyncrasies. Consequently, the compilers of a multi-regional input–output table (MRIOT) are advised to thoroughly examine the conceptual as well as methodological differences among countries in the estimation of basic statistics for national IO tables and, if necessary, to carry out pre-adjustment of these tables into a common format prior to the MRIOT compilation. The objective of this study is to provide a practical guide for harmonizing national IO tables to construct a consistent MRIOT, referring to the adjustment practices used by the Institute of Developing Economies, JETRO (IDE-JETRO) in compiling the Asian International Input–Output Table.

Managing Industrial Simulator Visual Databases Using Geographic Information Systems

Geographic Information Systems are developed to handle enormous volumes of data and are equipped with numerous functionalities intended to capture, store, edit, organise, process and analyse or represent the geographically referenced information. On the other hand, industrial simulators for driver training are real-time applications that require a virtual environment, either geospecific, geogeneric or a combination of the two, over which the simulation programs will be run. In the final instance, this environment constitutes a geographic location with its specific characteristics of geometry, appearance, functionality, topography, etc. The set of elements that enables the virtual simulation environment to be created and in which the simulator user can move, is usually called the Visual Database (VDB). The main idea behind the work being developed approaches a topic that is of major interest in the field of industrial training simulators, which is the problem of analysing, structuring and describing the virtual environments to be used in large driving simulators. This paper sets out a methodology that uses the capabilities and benefits of Geographic Information Systems for organising, optimising and managing the visual Database of the simulator and for generally enhancing the quality and performance of the simulator.

Assessment of CTF boiling transition and critical heat flux modeling capabilities using the OECD/NRC BFBT and PSBT benchmark databases

The need to refine models for best-estimate calculations, based on good-quality experimental data, has been expressed in many recent meetings in the field of nuclear applications. The modeling needs arising in this respect should not be limited to the currently available macroscopic methods but should be extended to next-generation analysis techniques that focus on more microscopic processes. One of the most valuable databases identified for the thermalhydraulics modeling was developed by the Nuclear Power Engineering Corporation (NUPEC), Japan. From 1987 to 1995, NUPEC performed steady-state and transient critical power and departure from nucleate boiling (DNB) test series based on the equivalent full-size mock-ups. Considering the reliability not only of the measured data, but also other relevant parameters such as the system pressure, inlet sub-cooling and rod surface temperature, these test series supplied the first substantial database for the development of truly mechanistic and consistent models for boiling transition and critical heat flux. Over the last few years the Pennsylvania State University (PSU) under the sponsorship of the U.S. Nuclear Regulatory Commission (NRC) has prepared, organized, conducted and summarized the OECD/NRC Full-size Fine-mesh Bundle Tests (BFBT) Benchmark. The international benchmark activities have been conducted in cooperation with the Nuclear Energy Agency/Organization for Economic Co-operation and Development (NEA/OECD) and Japan Nuclear Energy Safety (JNES) organization, Japan. Consequently, the JNES has made available the Boiling Water Reactor (BWR) NUPEC database for the purposes of the benchmark. Based on the success of the OECD/NRC BFBT benchmark the JNES has decided to release also the data based on the NUPEC Pressurized Water Reactor (PWR) subchannel and bundle tests for another follow-up international benchmark entitled OECD/NRC PWR Subchannel and Bundle Tests (PSBT) benchmark. This paper presents an application of the joint Penn State University/Technical University of Madrid (UPM) version of the well-known subchannel code COBRA-TF, namely CTF, to the critical power and departure from nucleate boiling (DNB) exercises of the OECD/NRC BFBT and PSBT benchmarks

Use of prediction methods for patent and trademark applications in Spain

Patent and trademark offices which run according to principles of new management have an inherent need for dependable forecasting data in planning capacity and service levels. The ability of the Spanish Office of Patents and Trademarks to carry out efficient planning of its resource needs requires the use of methods which allow it to predict the changes in the number of patent and trademark applications at different time horizons. The approach for the prediction of time series of Spanish patents and trademarks applications (1979e2009) was based on the use of different techniques of time series prediction in a short-term horizon. The methods used can be grouped into two specifics areas: regression models of trends and time series models. The results of this study show that it is possible to model the series of patents and trademarks applications with different models, especially ARIMA, with satisfactory model adjustment and relatively low error.

How vague can your patent be? Vagueness strategies in U.S. patents

Patent claims defi ne the protection scope of the intellectual property sought by the patent applicant or patentee. Broad claims are valuable as they can describe more expansive rights to the invention. Therefore, if these claims are too broad a potential infringer will more easily argue against them. But if the claims are too narrow the scope of protection of the intellectual property is greatly reduced. Patent claims have to be, on the one hand, determinate and precise enough and, on the other hand, as inclusive as possible. Therefore patent applicants must fi nd a balance in the broadness of the scope defi ned by their claims. This balance can be achieved by the choice of words with a convenient degree of semantic indeterminacy, by the choice of modifi ers or other strategies. In fact, vagueness in patent claims is a desirable characteristic for such documents. A quantitative and qualitative analysis of a corpus of 350 U.S. patents provides a promising starting point to understand the linguistic instruments used to achieve the balance between property claim scope and precision of property description. To conclude, some issues relating vagueness and pragmatics are suggested as a line of further research.

Assessment of CTF boiling transition and critical heat flux modeling capabilities using the OECD/NRC BFBT and PSBT benchmark databases

Over the last few years, the Pennsylvania State University (PSU) under the sponsorship of the US Nuclear Regulatory Commission (NRC) has prepared, organized, conducted, and summarized two international benchmarks based on the NUPEC data—the OECD/NRC Full-Size Fine-Mesh Bundle Test (BFBT) Benchmark and the OECD/NRC PWR Sub-Channel and Bundle Test (PSBT) Benchmark. The benchmarks’ activities have been conducted in cooperation with the Nuclear Energy Agency/Organization for Economic Co-operation and Development (NEA/OECD) and the Japan Nuclear Energy Safety (JNES) Organization. This paper presents an application of the joint Penn State University/Technical University of Madrid (UPM) version of the well-known sub-channel code COBRA-TF (Coolant Boiling in Rod Array-Two Fluid), namely, CTF, to the steady state critical power and departure from nucleate boiling (DNB) exercises of the OECD/NRC BFBT and PSBT benchmarks. The goal is two-fold: firstly, to assess these models and to examine their strengths and weaknesses; and secondly, to identify the areas for improvement.

Patent elucidation for clil and vice versa understanding the inventor´s mind

In this paper we present an English-medium instruction (EMI) team-teaching initiative to be soon implemented within the Agronomic Engineering masters programme at the Technical University of Madrid (UPM). Through the patent genre we not only intend to teach specific agronomical syllabi contents synchronically and diachronically, but also broaden our students’ academic and professional literacies, help them practice and improve their communication abilities in English as a lingua franca, and motivate them as future autonomous professionals while fostering the exercise of higher-level transversal skills—critical thinking, creativity, cooperation, and entrepreneurship. We begin by introducing the current mobility trends in higher education contexts and the common misconceptions surrounding the notion of patent, and get on to describe the design and evaluation procedures of the course. To conclude, we recapitulate the main benefits of our pedagogical proposal and open windows onto further didactic applications.

Patents and Economic Activity: The Need to Develop Prediction Methods for Patent Applications

Since the decade of the 1980’s the literature on economic development began paying attention to the cases of countries which were industrialized after the first industrial revolution. One of the most relevant aspects analyzed has been the role of technology as a factor which promotes or delays the process of catching up with technology leaders. As result of this interest, new and more adequate indicators were identified to provide a coherent explanation for technological activities and their relationship with economic efficiency. Although the earliest studies focused on analyzing the activities of research and development (R&D), recently the focus of analysis has shifted to another type of variables, more oriented towards the processes of innovation and the gathering of knowledge and capabilities, in which patents provide relevant information.

Understanding the inventor’s mind through patent analysis: a clil team-teaching experience at the Technical University of Madrid

Describimos una iniciativa de enseñanza en equipo, basada en la metodología CLIL y aplicada recientemente en la Escuela Técnica Superior de Ingenieros Agrónomos de la Universidad Politécnica de Madrid. Dos profesoras—una ingeniera agrónoma y una lingüista, junto con cerca de 20 estudiantes de máster, analizamos una patente contrastándola con un artículo de investigación homólogo, escrito por los mismos autores sobre el mismo objeto tecnológico, y examinando sus diferentes contextos y consecuencias sociales. Con una duración de siete horas y media y un carácter eminentemente práctico, el seminario impartido no sólo se ha diseñado para proporcionar contenidos disciplinarios (agronómicos) y procedimentales (las estrategias propias de la escritura de patentes), sino también para suscitar sensibilidad hacia el lector y fomentar competencias transversales