Early Development of Auditory-Verbal and Visual-Spatial Short-Term Memory: Age and Sex Effects

Memory is a multi-component cognitive ability to retain and retrieve information presented in different modalities. Research on memory development has shown that the memory capacity and the processes improve gradually from early childhood to adolescence. Findings related to the sex-differences in memory abilities in early childhood have been inconsistent. Although previous research has demonstrated the effects of the modality of stimulus presentation (auditory versus verbal) and the type of material to be remembered (visual/spatial versus auditory/verbal) on the memory processes and memory organization, the recent research with children is rather limited. The present study is a secondary analysis of data, originally collected from 530 typically developing Turkish children and adolescents. The purpose of the present study was to examine the age-related developments and sex differences in auditory-verbal and visual-spatial short-term memory (STM) in 177 typically developing male and female children, 5 to 8 years of age. Dot-Locations and Word-Lists from the Children's Memory Scale were used to measure visual-spatial and auditory-verbal STM performances, respectively. The findings of the present study suggest age-related differences in both visual-spatial and auditory-verbal STM. Sex-differences were observed only in one visual-spatial STM subtest performance. Modality comparisons revealed age- and task-related differences between auditory-verbal and visual-spatial STM performances. There were no sex-related effects in terms of modality specific performances. Overall, the results of this study provide evidence of STM development in early childhood, and these effects were mostly independent of sex and the modality of the task.

Five-year predictors of physical activity decline among adults in low-income communities: a prospective study

Affiliation: J. O'Loughlin: Department of Social and Preventive Medicine, Centre de recherche CHUM, Université de Montréal

Studies on Laser Induced and RF Sputtered Plasma using Optical Emission Spectroscopy and Langmuir Probe

The main objective of the present study is to understand different mechanisms involved in the production and evolution of plasma by the pulsed laser ablation and radio frequency magnetron sputtering. These two methods are of particular interest, as these are well accomplished methods used for surface coatings, nanostructure fabrications and other thin film devices fabrications. Material science researchers all over the world are involved in the development of devices based on transparent conducting oxide (TCO) thin films. Our laboratory has been involved in the development of TCO devices like thin film diodes using zinc oxide (ZnO) and zinc magnesium oxide (ZnMgO), thin film transistors (TFT's) using zinc indium oxide and zinc indium tin oxide, and some electroluminescent (EL) devices by pulsed laser ablation and RF magnetron sputtering.In contrast to the extensive literature relating to pure ZnO and other thin films produced by various deposition techniques, there appears to have been relatively little effort directed towards the characterization of plasmas from which such films are produced. The knowledge of plasma dynamics corresponding to the variations in the input parameters of ablation and sputtering, with the kind of laser/magnetron used for the generation of plasma, is limited. To improve the quality of the deposited films for desired application, a sound understanding of the plume dynamics, physical and chemical properties of the species in the plume is required. Generally, there is a correlation between the plume dynamics and the structural properties of the films deposited. Thus the study of the characteristics of the plume contributes to a better understanding and control of the deposition process itself. The hydrodynamic expansion of the plume, the composition, and SIze distribution of clusters depend not only on initial conditions of plasma production but also on the ambient gas composition and pressure. The growth and deposition of the films are detennined by the thermodynamic parameters of the target material and initial conditions such as electron temperature and density of the plasma.For optimizing the deposition parameters of various films (stoichiometric or otherwise), in-situ or ex-situ monitoring of plasma plume dynamics become necessary for the purpose of repeatability and reliability. With this in mind, the plume dynamics and compositions of laser ablated and RF magnetron sputtered zinc oxide plasmas have been investigated. The plasmas studied were produced at conditions employed typically for the deposition of ZnO films by both methods. Apart from this two component ZnO plasma, a multi-component material (lead zirconium titanate) was ablated and plasma was characterized.

A facile strategy for the synthesis of highly substituted imidazole using tetrabutyl ammoniumbromide as catalyst

A simple and facile strategy for the synthesis of highly substituted imidazoles has been developed by multi-component condensation of 1,2-diketone, aldehyde, amine, and ammonium acetate in presence of tetrabutyl ammonium bromide as catalyst

Improved Biometric Authentication System Using Multimodal Cue Integration

Biometrics is an efficient technology with great possibilities in the area of security system development for official and commercial applications. The biometrics has recently become a significant part of any efficient person authentication solution. The advantage of using biometric traits is that they cannot be stolen, shared or even forgotten. The thesis addresses one of the emerging topics in Authentication System, viz., the implementation of Improved Biometric Authentication System using Multimodal Cue Integration, as the operator assisted identification turns out to be tedious, laborious and time consuming. In order to derive the best performance for the authentication system, an appropriate feature selection criteria has been evolved. It has been seen that the selection of too many features lead to the deterioration in the authentication performance and efficiency. In the work reported in this thesis, various judiciously chosen components of the biometric traits and their feature vectors are used for realizing the newly proposed Biometric Authentication System using Multimodal Cue Integration. The feature vectors so generated from the noisy biometric traits is compared with the feature vectors available in the knowledge base and the most matching pattern is identified for the purpose of user authentication. In an attempt to improve the success rate of the Feature Vector based authentication system, the proposed system has been augmented with the user dependent weighted fusion technique.

Molecular computations for reactions and phase transitions: applications to protein stabilization, hydrates and catalysis

In this work we have made significant contributions in three different areas of interest: therapeutic protein stabilization, thermodynamics of natural gas clathrate-hydrates, and zeolite catalysis. In all three fields, using our various computational techniques, we have been able to elucidate phenomena that are difficult or impossible to explain experimentally. More specifically, in mixed solvent systems for proteins we developed a statistical-mechanical method to model the thermodynamic effects of additives in molecular-level detail. It was the first method demonstrated to have truly predictive (no adjustable parameters) capability for real protein systems. We also describe a novel mechanism that slows protein association reactions, called the “gap effect.” We developed a comprehensive picture of methioine oxidation by hydrogen peroxide that allows for accurate prediction of protein oxidation and provides a rationale for developing strategies to control oxidation. The method of solvent accessible area (SAA) was shown not to correlate well with oxidation rates. A new property, averaged two-shell water coordination number (2SWCN) was identified and shown to correlate well with oxidation rates. Reference parameters for the van der Waals Platteeuw model of clathrate-hydrates were found for structure I and structure II. These reference parameters are independent of the potential form (unlike the commonly used parameters) and have been validated by calculating phase behavior and structural transitions for mixed hydrate systems. These calculations are validated with experimental data for both structures and for systems that undergo transitions from one structure to another. This is the first method of calculating hydrate thermodynamics to demonstrate predictive capability for phase equilibria, structural changes, and occupancy in pure and mixed hydrate systems. We have computed a new mechanism for the methanol coupling reaction to form ethanol and water in the zeolite chabazite. The mechanism at 400°C proceeds via stable intermediates of water, methane, and protonated formaldehyde.

Disseny d'agents físics: inclusió de capacitats específiques per a l'avaluació de l'eficiència d'accions

L'experiència de l'autor en la temàtica d'agents intel·ligents i la seva aplicació als robots que emulen el joc de futbol han donat el bagatge suficient per poder encetar i proposar la temàtica plantejada en aquesta tesi: com fer que un complicat robot pugui treure el màxim suc de l'autoconeixement de l'estructura de control inclosa al seu propi cos físic, i així poder cooperar millor amb d'altres agents per optimitzar el rendiment a l'hora de resoldre problemes de cooperació. Per resoldre aquesta qüestió es proposa incorporar la dinàmica del cos físic en les decisions cooperatives dels agents físics unificant els móns de l'automàtica, la robòtica i la intel·ligència artificial a través de la noció de capacitat: la capacitat vista com a entitat on els enginyers de control dipositen el seu coneixement, i a la vegada la capacitat vista com la utilitat on un agent hi diposita el seu autoconeixement del seu cos físic que ha obtingut per introspecció. En aquesta tesi es presenta l'arquitectura DPAA que s'organitza seguint una jerarquia vertical en tres nivells d'abstracció o mòduls control, supervisor i agent, els quals presenten una estructura interna homogènia que facilita les tasques de disseny de l'agent. Aquests mòduls disposen d'un conjunt específic de capacitats que els permeten avaluar com seran les accions que s'executaran en un futur. En concret, al mòdul de control (baix nivell d'abstracció) les capacitats consisteixen en paràmetres que descriuen el comportament dinàmic i estàtic que resulta d'executar un controlador determinat, és a dir, encapsulen el coneixement de l'enginyer de control. Així, a través dels mecanismes de comunicació entre mòduls aquest coneixement pot anar introduint-se als mecanismes de decisió dels mòduls superiors (supervisor i agent) de forma que quan els paràmetres dinàmics i estàtics indiquin que pot haver-hi problemes a baix nivell, els mòduls superiors es poden responsabilitzar d'inhibir o no l'execució d'algunes accions. Aquest procés top-down intern d'avaluació de la viabilitat d'executar una acció determinada s'anomena procés d'introspecció. Es presenten diversos exemples per tal d'il·lustrar com es pot dissenyar un agent físic amb dinàmica pròpia utilitzant l'arquitectura DPAA com a referent. En concret, es mostra tot el procés a seguir per dissenyar un sistema real format per dos robots en formació de comboi, i es mostra com es pot resoldre el problema de la col·lisió utilitzant les capacitats a partir de les especificacions de disseny de l'arquitectura DPAA. Al cinquè capítol s'hi exposa el procés d'anàlisi i disseny en un domini més complex: un grup de robots que emulen el joc del futbol. Els resultats que s'hi mostren fan referència a l'avaluació de la validesa de l'arquitectura per resoldre el problema de la passada de la pilota. S'hi mostren diversos resultats on es veu que és possible avaluar si una passada de pilota és viable o no. Encara que aquesta possibilitat ja ha estat demostrada en altres treballs, l'aportació d'aquesta tesi està en el fet que és possible avaluar la viabilitat a partir de l'encapsulament de la dinàmica en unes capacitats específiques, és a dir, és possible saber quines seran les característiques de la passada: el temps del xut, la precisió o inclòs la geometria del moviment del robot xutador. Els resultats mostren que la negociació de les condicions de la passada de la pilota és possible a partir de capacitats atòmiques, les quals inclouen informació sobre les característiques de la dinàmica dels controladors. La complexitat del domini proposat fa difícil comparar els resultats amb els altres treballs. Cal tenir present que els resultats mostrats s'han obtingut utilitzant un simulador fet a mida que incorpora les dinàmiques dels motors dels robots i de la pilota. En aquest sentit cal comentar que no existeixen treballs publicats sobre el problema de la passada en què es tingui en compte la dinàmica dels robots. El present treball permet assegurar que la inclusió de paràmetres dinàmics en el conjunt de les capacitats de l'agent físic permet obtenir un millor comportament col·lectiu dels robots, i que aquesta millora es deu al fet que en les etapes de decisió els agents utilitzen informació relativa a la viabilitat sobre les seves accions: aquesta viabilitat es pot calcular a partir del comportament dinàmic dels controladors. De fet, la definició de capacitats a partir de paràmetres dinàmics permet treballar fàcilment amb sistemes autònoms heterogenis: l'agent físic pot ser conscient de les seves capacitats d'actuació a través de mecanismes interns d'introspecció, i això permet que pugui prendre compromisos amb altres agents físics.

The effects of scene heterogeneity on soil moisture retrieval from passive microwave data

The s–x model of microwave emission from soil and vegetation layers is widely used to estimate soil moisture content from passive microwave observations. Its application to prospective satellite-based observations aggregating several thousand square kilometres requires understanding of the effects of scene heterogeneity. The effects of heterogeneity in soil surface roughness, soil moisture, water area and vegetation density on the retrieval of soil moisture from simulated single- and multi-angle observing systems were tested. Uncertainty in water area proved the most serious problem for both systems, causing errors of a few percent in soil moisture retrieval. Single-angle retrieval was largely unaffected by the other factors studied here. Multiple-angle retrievals errors around one percent arose from heterogeneity in either soil roughness or soil moisture. Errors of a few percent were caused by vegetation heterogeneity. A simple extension of the model vegetation representation was shown to reduce this error substantially for scenes containing a range of vegetation types.

A cross-taxonomic index for quantifying the health of farmland biodiversity

P>1. The development of sustainable, multi-functional agricultural systems involves reconciling the needs of agricultural production with the objectives for environmental protection, including biodiversity conservation. However, the definition of sustainability remains ambiguous and it has proven difficult to identify suitable indicators for monitoring progress towards, and the successful achievement of, sustainability. 2. In this study, we show that a trait-based approach can be used to assess the detrimental impacts of agricultural change to a broad range of taxonomic groupings and derive a standardised index of farmland biodiversity health, built around an objective of achieving stable or increasing populations in all species associated with agricultural landscapes. 3. To demonstrate its application, we assess the health of UK farmland biodiversity relative to this goal. Our results suggest that the populations of two-thirds of 333 plant and animal species assessed are unsustainable under current UK agricultural practices. 4. We then explore the potential benefits of an agri-environment scheme, Entry Level Stewardship (ELS), to farmland biodiversity in the UK under differing levels of risk mitigation delivery. We show that ELS has the potential to make a significant contribution to progress towards sustainability targets but that this potential is severely restricted by current patterns of scheme deployment. 5.Synthesis and applications: We have developed a cross-taxonomic sustainability index which can be used to assess both the current health of farmland biodiversity and the impacts of future agricultural changes relative to quantitative biodiversity targets. Although biodiversity conservation is just one of a number of factors that must be considered when defining sustainability, we believe our cross-taxonomic index has the potential to be a valuable tool for guiding the development of sustainable agricultural systems.

Synthesis and evaluation of a solid supported molecular tweezer type receptor for cholesterol

A new macroporous stationary phase bearing 'tweezer' receptors that exhibit specificity for cholesterol has been constructed from rigid multifunctional vinylic monomers derived from 3,5-dibromobenzoic acid, propargyl alcohol and cholesterol. The synthesis of the novel tweezer monomer that contains two cholesterol receptor arms using palladium mediated Sonogashira methodologies and carbonate couplings is reported. The subsequent co-polymerisation of this tweezer monomer with a range of cross-linking agents via a 'pseudo' molecular imprinting approach afforded a diverse set of macroporous materials. The selectivity and efficacy of these materials for cholesterol binding was assessed using a chromatographic screening process. The optimum macroporous stationary phase material composition was subsequently used to construct monolithic solid phase extraction columns for use in the selective extraction of cholesterol from multi-component mixtures of structurally related steroids.

Big and little Meccano

The emergence of the mechanical bond during the past 25 years is giving chemistry a fillip in more ways than one. While its arrival on the scene is already impacting materials science and molecular nanotechnology, it is providing a new lease of life to chemical synthesis where mechanical bond formation Occurs as a consequence of the all-important templation Orchestrated by molecular recognition and self-assembly. The way in which covalent bond formation activates noncovalent bonding interactions, switching on molecular recognition that leads to self-assembly, and the template-directed synthesis of mechanically interlocked molecules-of which the so-called catenanes and rotaxanes may be regarded as the prototypes-has introduced a level of integration into chemical synthesis that has not previously been attained jointly at the supramolecular and molecular levels. The challenge now is to carry this I vel of integration during molecular synthesis beyond relatively small molecules into the realms of precisely functionalized extended molecular Structures and superstructures that perform functions in a collective manner as the key sources of instruction, activation, and performance in multi-component integrated Circuits and devices. These forays into organic chemistry by a scientific nomad are traced through thick and thin from the Athens of the North to the Windy City by Lake Michigan with interludes on the edge of the Canadian Shield beside Lake Ontario, in the Socialist Republic of South Yorkshire, on the Plains of Cheshire beside the Wirral, in the Midlands in the Heartland of Albion, and in the City of Angels beside the Peaceful Sea. (C) 2008 Elsevier Ltd. All rights reserved.

Similarity solutions for multicomponent flows

A one-dimensional shock-reflection test problem in the case of slab, cylindrical or spherical symmetry is discussed for multi-component flows. The differential equations for a similarity solution are derived and then solved numerically in conjunction with the Rankine-Hugoniot shock relations.

Using an additive to control the electrospinning of fibres of poly(epsilon-caprolactone)

Electrospinning is a route to polymer fibres with diameters considerably smaller than available from most fibre-producing techniques. We explore the use of a low molecular weight compound as an effective control additive during the electrospinning of poly(epsilon-caprolactone). This approach extends the control variables for the electrospinning of nanoscale fibres from the more usual ones such as the polymer molecular weight, solvent and concentration. We show that through the use of dual solvent systems, we can alter the impact of the additive on the electrospinning process so that finer as well as thicker fibres can be prepared under otherwise identical conditions. As well as the size of the fibres and the number of beads, the use of the additive allows us to alter the level of crystallinity as well as the level of preferred orientation of the poly(epsilon-caprolactone) crystals. This approach, involving the use of a dual solvent and a low molar mass compound, offers considerable potential for application to other polymer systems. (C) 2010 Society of Chemical Industry

Global retrieval of ATSR cloud parameters and evaluation (GRAPE): dataset assessment

The Along-Track Scanning Radiometers (ATSRs) provide a long time-series of measurements suitable for the retrieval of cloud properties. This work evaluates the freely-available Global Retrieval of ATSR Cloud Parameters and Evaluation (GRAPE) dataset (version 3) created from the ATSR-2 (1995�2003) and Advanced ATSR (AATSR; 2002 onwards) records. Users are recommended to consider only retrievals flagged as high-quality, where there is a good consistency between the measurements and the retrieved state (corresponding to about 60% of converged retrievals over sea, and more than 80% over land). Cloud properties are found to be generally free of any significant spurious trends relating to satellite zenith angle. Estimates of the random error on retrieved cloud properties are suggested to be generally appropriate for optically-thick clouds, and up to a factor of two too small for optically-thin cases. The correspondence between ATSR-2 and AATSR cloud properties is high, but a relative calibration difference between the sensors of order 5�10% at 660 nm and 870 nm limits the potential of the current version of the dataset for trend analysis. As ATSR-2 is thought to have the better absolute calibration, the discussion focusses on this portion of the record. Cloud-top heights from GRAPE compare well to ground-based data at four sites, particularly for shallow clouds. Clouds forming in boundary-layer inversions are typically around 1 km too high in GRAPE due to poorly-resolved inversions in the modelled temperature profiles used. Global cloud fields are compared to satellite products derived from the Moderate Resolution Imaging Spectroradiometer (MODIS), Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) measurements, and a climatology of liquid water content derived from satellite microwave radiometers. In all cases the main reasons for differences are linked to differing sensitivity to, and treatment of, multi-layer cloud systems. The correlation coefficient between GRAPE and the two MODIS products considered is generally high (greater than 0.7 for most cloud properties), except for liquid and ice cloud effective radius, which also show biases between the datasets. For liquid clouds, part of the difference is linked to choice of wavelengths used in the retrieval. Total cloud cover is slightly lower in GRAPE (0.64) than the CALIOP dataset (0.66). GRAPE underestimates liquid cloud water path relative to microwave radiometers by up to 100 g m�2 near the Equator and overestimates by around 50 g m�2 in the storm tracks. Finally, potential future improvements to the algorithm are outlined.

Maximising concurrency and scalability in a consistent, causal, distributed virtual reality system, whilst minimising the effect of network delays

The development of large scale virtual reality and simulation systems have been mostly driven by the DIS and HLA standards community. A number of issues are coming to light about the applicability of these standards, in their present state, to the support of general multi-user VR systems. This paper pinpoints four issues that must be readdressed before large scale virtual reality systems become accessible to a larger commercial and public domain: a reduction in the effects of network delays; scalable causal event delivery; update control; and scalable reliable communication. Each of these issues is tackled through a common theme of combining wall clock and causal time-related entity behaviour, knowledge of network delays and prediction of entity behaviour, that together overcome many of the effects of network delay.