Aplicació d'algoritmes genètics en l'optimització dels processos de fabricació del paper

La creciente preocupación y concienciación de la sociedad respecto el medio ambiente, y en consecuencia la legislación y regulaciones generadas inducen a la modificación de los procesos productivos existentes en la industria química. Las configuraciones iniciales deben modificarse para conseguir una mayor integración de procesos. Para este fin se han creado y desarrollado diferentes metodologías que deben facilitar la tarea a los responsables del rediseño. El desarrollo de una metodología y herramientas complementarias es el principal objetivo de la investigación aquí presentada, especialmente centrada en el desarrollo y la aplicación de una metodología de optimización de procesos. Esta metodología de optimización se aplica sobre configuraciones de proceso existentes y pretende encontrar nuevas configuraciones viables según los objetivos de optimización fijados. La metodología tiene dos partes diferenciadas: la primera se basa en un simulador de procesos comercial y la segunda es la técnica de optimización propiamente dicha. La metodología se inicia con la elaboración de una simulación convenientemente validada que reproduzca el proceso existente, en este caso una papelera no integrada que produce papel estucado de calidad, para impresión. A continuación la técnica de optimización realiza una búsqueda dentro del dominio de los posibles resultados, en busca de los mejores resultados que satisfazcan plenamente los objetivos planteados. Dicha técnica de optimización está basada en los algoritmos genéticos como herramienta de búsqueda, junto a un subprograma basado en técnicas de programación matemática para el cálculo de resultados. Un número reducido de resultados son finalmente escogidos y utilizados para modificar la simulación existente fijando la redistribución de los flujos del proceso. Los resultados de la simulación del proceso determinan en último caso la viabilidad técnica de cada reconfiguración planteada. En el proceso de optimización, los objetivos están definidos en una función objetivo dentro de la técnica de optimización. Dicha función rige la búsqueda de resultados. La función objetivo puede ser individual o una combinación de objetivos. En el presente caso, la función persigue una minimización del consumo de agua y una minimización de la pérdida de materia prima. La optimización se realiza bajo restricciones para alcanzar este objetivo combinado en forma de una solución de compromiso. Producto de la aplicación de esta metodología se han obtenido resultados interesantes que significan una mejora del cierre de circuitos y un ahorro de materia prima, sin comprometer al mismo tiempo la operabilidad del proceso producto ni la calidad del papel.

Nous complexos mono- i dinuclears de ruteni amb lligands polipiridílics i de tipus fosfina. Síntesi, caracterització i aplicacions catalítiques

La Tesi descriu de manera completa una sèrie de complexos de ruteni amb lligands polipiridílics i lligands auxiliars de tipus fosfina, dmso, nitril o aquo. Es descriuen estudis d'isomerització (cis/trans o coordinació meridional/facial) en complexos mononuclears, a partir de tècniques espectroscòpiques. Els resultats experimentals es corroboren a partir de càlculs DFT. S'han fet també estudis d'activitat catalítica en transferència d'hidrogen per als complexos Ru-fosfina. S'han sintetitzat també complexos dinuclears de ruteni amb el lligand tetradentat Hbpp i s'ha avaluat llur activitat en la catàlisi d'oxidació d'aigua, determinant la importància de la correcta orientació relativa dels centres actius Ru=O. L'heterogeneïtzació dels complexos sobre suports conductors permet avaluar llur activitat en fase heterogènia, millorant respecte el corresponent procés en dissolució. La co-polimerització dels catalitzadors amb espècies de tipus metalocarborà, amb major dilució del catalitzador i minimització de la sobreoxidació, millora notablement els resultats, permetent diverses reutilitzacions.

Hand-held 3D-scanner for large surface registration

L'objectiu d'aquesta tesi és l'estudi de les diferents tècniques per alinear vistes tridimensionals. Aquest estudi ens ha permès detectar els principals problemes de les tècniques existents, aprotant una solució novedosa i contribuint resolent algunes de les mancances detectades especialment en l'alineament de vistes a temps real. Per tal d'adquirir les esmentades vistes, s'ha dissenyat un sensor 3D manual que ens permet fer adquisicions tridimensionals amb total llibertat de moviments. Així mateix, s'han estudiat les tècniques de minimització global per tal de reduir els efectes de la propagació de l'error.

Aprender a ler, aprender a conviver: aprendizagem da leitura como veículo para a socialização

O trabalho apresentado é decorrente do Projeto de Intervenção realizado no âmbito do Curso de 2º Ciclo em Educação Especial – domínio cognitivo e motor, da Universidade Lusófona de Humanidades e Tecnologias. Resumo A referida intervenção contempla a minimização das dificuldades apresentadas por uma menina a nível da leitura e escrita e da sua socialização, numa perspetiva inclusiva. M. é o nome fictício da aluna alvo da intervenção. Atualmente, frequenta o 3º ano de escolaridade numa escola pública, em Lisboa área da sua residência. A revisão da literatura vai sustentar e facilitar a compreensão clara e concisa da intervenção realizada e das posições defendidas sobre esta matéria. Deste modo, são tratados temas no âmbito da exclusão social e escolar, da escola Inclusiva e dos obstáculos que ainda encontramos nas escolas, dos preconceitos, dos alunos com necessidades educativas especiais, das adaptações curriculares, da aprendizagem cooperativa e diferenciação pedagógica, referimo-nos ainda às dificuldades de aprendizagem e, por último, à comunicação e à linguagem oral e escrita. Para obter informações sobre a M. e sobre o contexto da intervenção, bem como sobre todo o seu processo de inclusão escolar, utilizamos como suporte metodológico, a pesquisa documental, as entrevistas semi-diretivas à professora titular de turma e à professora de ensino especial, a observação naturalista, a sociometria e as notas de campo para se poder complementar as informações. A planificação global da intervenção foi elaborada a partir do relacionamento/ cruzamento dos dados que resultaram da análise da informação recolhida. Para uma intervenção fundamentada caracterizamos inicialmente o seu contexto escolar e familiar e posteriormente a M. Os princípios orientadores da intervenção realizada, assentam numa perspetiva de investigação para a ação, e tiveram presentes os objetivos definidos para a M. As atividades foram realizadas, numa perspetiva de aprendizagem muito estruturada, muito refletida e avaliada durante todo o processo, implicando todos os intervenientes. Esta intervenção, levou-nos a estimular práticas educativas, diferenciadas e inclusivas na turma, com a professora titular dessa turma e com a professora do ensino especial com os colegas da M.

Algorithm for generating defective graphene sheets

An algorithm is presented for the generation of molecular models of defective graphene fragments, containing a majority of 6-membered rings with a small number of 5- and 7-membered rings as defects. The structures are generated from an initial random array of points in 2D space, which are then subject to Delaunay triangulation. The dual of the triangulation forms a Voronoi tessellation of polygons with a range of ring sizes. An iterative cycle of refinement, involving deletion and addition of points followed by further triangulation, is performed until the user-defined criteria for the number of defects are met. The array of points and connectivities are then converted to a molecular structure and subject to geometry optimization using a standard molecular modeling package to generate final atomic coordinates. On the basis of molecular mechanics with minimization, this automated method can generate structures, which conform to user-supplied criteria and avoid the potential bias associated with the manual building of structures. One application of the algorithm is the generation of structures for the evaluation of the reactivity of different defect sites. Ab initio electronic structure calculations on a representative structure indicate preferential fluorination close to 5-ring defects.

Optimal inverter design for an induction machine using resonant frequency matching

The frequency responses of two 50 Hz and one 400 Hz induction machines have been measured experimentally over a frequency range of 1 kHz to 400 kHz. This study has shown that the stator impedances of the machines behave in a similar manner to a parallel resonant circuit, and hence have a resonant point at which the Input impedance of the machine is at a maximum. This maximum impedance point was found experimentally to be as low as 33 kHz, which is well within the switching frequency ranges of modern inverter drives. This paper investigates the possibility of exploiting the maximum impedance point of the machine, by taking it into consideration when designing an inverter, in order to minimize ripple currents due to the switching frequency. Minimization of the ripple currents would reduce torque pulsation and losses, increasing overall performance. A modified machine model was developed to take into account the resonant point, and this model was then simulated with an inverter to demonstrate the possible advantages of matching the inverter switching frequency to the resonant point. Finally, in order to experimentally verify the simulated results, a real inverter with a variable switching frequency was used to drive an induction machine. Experimental results are presented.

A benchmark method for global optimization problems in structure determination from powder diffraction data

Quasi-Newton-Raphson minimization and conjugate gradient minimization have been used to solve the crystal structures of famotidine form B and capsaicin from X-ray powder diffraction data and characterize the chi(2) agreement surfaces. One million quasi-Newton-Raphson minimizations found the famotidine global minimum with a frequency of ca 1 in 5000 and the capsaicin global minimum with a frequency of ca 1 in 10 000. These results, which are corroborated by conjugate gradient minimization, demonstrate the existence of numerous pathways from some of the highest points on these chi(2) agreement surfaces to the respective global minima, which are passable using only downhill moves. This important observation has significant ramifications for the development of improved structure determination algorithms.

Building cluster and shading in urban canyon for hot dry climate - Part 1: Air and surface temperature measurements

Under low latitude conditions, minimization of solar radiation within the urban environment may often be a desirable criterion in urban design. The dominance of the direct component of the global solar irradiance under clear high sun conditions requires that the street solar access must be small. It is well known that the size and proportion of open spaces has a great influence on the urban microclimate This paper is directed towards finding the interaction between urban canyon geometry and incident solar radiation. The effect of building height and street width on the shading of the street surfaces and ground for different orientations have been examined and evaluated. It is aimed to explore the extent to which these parameters affect the temperature in the street. This work is based on air and surface temperature measurements taken in different urban street canyons in EL-Oued City (hot and and climate), Algeria. In general, the results show that there are less air temperature variations compared to the surface temperature which really depends on the street geometry and sky view factor. In other words, there is a big correlation between the street geometry, sky view factor and surface temperatures.

Backward elimination model construction for regression and classification using leave-one-out criteria

A fundamental principle in practical nonlinear data modeling is the parsimonious principle of constructing the minimal model that explains the training data well. Leave-one-out (LOO) cross validation is often used to estimate generalization errors by choosing amongst different network architectures (M. Stone, "Cross validatory choice and assessment of statistical predictions", J. R. Stast. Soc., Ser. B, 36, pp. 117-147, 1974). Based upon the minimization of LOO criteria of either the mean squares of LOO errors or the LOO misclassification rate respectively, we present two backward elimination algorithms as model post-processing procedures for regression and classification problems. The proposed backward elimination procedures exploit an orthogonalization procedure to enable the orthogonality between the subspace as spanned by the pruned model and the deleted regressor. Subsequently, it is shown that the LOO criteria used in both algorithms can be calculated via some analytic recursive formula, as derived in this contribution, without actually splitting the estimation data set so as to reduce computational expense. Compared to most other model construction methods, the proposed algorithms are advantageous in several aspects; (i) There are no tuning parameters to be optimized through an extra validation data set; (ii) The procedure is fully automatic without an additional stopping criteria; and (iii) The model structure selection is directly based on model generalization performance. The illustrative examples on regression and classification are used to demonstrate that the proposed algorithms are viable post-processing methods to prune a model to gain extra sparsity and improved generalization.

Conditioning of incremental variational data assimilation, with application to the Met Office system

Implementations of incremental variational data assimilation require the iterative minimization of a series of linear least-squares cost functions. The accuracy and speed with which these linear minimization problems can be solved is determined by the condition number of the Hessian of the problem. In this study, we examine how different components of the assimilation system influence this condition number. Theoretical bounds on the condition number for a single parameter system are presented and used to predict how the condition number is affected by the observation distribution and accuracy and by the specified lengthscales in the background error covariance matrix. The theoretical results are verified in the Met Office variational data assimilation system, using both pseudo-observations and real data.

The sky is the limit? The determinants and constraints of European airports' commercial revenues

This study investigates the determinants of commercial and retail airport revenues as well as revenues from real estate operations. Cross-sectional OLS, 2SLS and robust regression models of European airports identify a number of significant drivers of airport revenues. Aviation revenues per passenger are mainly determined by the national income per capita in which the airport is located, the percentage of leisure travelers and the size of the airport proxied by total aviation revenues. Main drivers of commercial revenues per passenger include the total number of passengers passing through the airport, the ratio of commercial to total revenues, the national income, the share of domestic and leisure travelers and the total number of flights. These results are in line with previous findings of a negative influence of business travelers on commercial revenues per passenger. We also find that a high amount of retail space per passenger is generally associated with lower commercial revenues per square meter confirming decreasing marginal revenue effects. Real estate revenues per passenger are positively associated with national income per capita at airport location, share of intra-EU passengers and percent delayed flights. Overall, aviation and non-aviation revenues appear to be strongly interlinked, underlining the potential for a comprehensive airport management strategy above and beyond mere cost minimization of the aviation sector.

Comments, with reply, on "Computational algorithms for pole assignment" by N.K. Nichols

Some points of the paper by N.K. Nichols (see ibid., vol.AC-31, p.643-5, 1986), concerning the robust pole assignment of linear multiinput systems, are clarified. It is stressed that the minimization of the condition number of the closed-loop eigenvector matrix does not necessarily lead to robustness of the pole assignment. It is shown why the computational method, which Nichols claims is robust, is in fact numerically unstable with respect to the determination of the gain matrix. In replying, Nichols presents arguments to support the choice of the conditioning of the closed-loop poles as a measure of robustness and to show that the methods of J Kautsky, N. K. Nichols and P. VanDooren (1985) are stable in the sense that they produce accurate solutions to well-conditioned problems.

Buyer–seller interaction in experimental spatial markets

We report results from experimental spatial markets with endogenous buyer location on a discrete version of Hotelling's linear city. Buyer locations favor more often the hypothesis of transportation cost minimization than that of strategic location aimed at increasing price competition between sellers. However, the latter of the two hypotheses receives systematic support too. Differentiation by seller-subjects is substantially less than the theory would predict for the specific framework used. Our results suggest that location strategies adopted by subjects can be seen as a rational process favoring conservative product design and spatial agglomeration of economic activities.

Predicting the orientation of lipid cubic phase films

Lipid cubic phase films are of increasingly widespread importance, both in the analysis of the cubic phases themselves by techniques including microscopy and X-ray scattering, and in their applications, especially as electrode coatings for electrochemical sensors and for templates for the electrodeposition of nanostructured metal. In this work we demonstrate that the crystallographic orientation adopted by these films is governed by minimization of interfacial energy. This is shown by the agreement between experimental data obtained using grazing-incidence small-angle X-ray scattering (GI-SAXS), and the predicted lowest energy orientation determined using a theoretical approach we have recently developed. GI-SAXS data show a high degree of orientation for films of both the double diamond phase and the gyroid phase, with the [111] and [110] directions respectively perpendicular to the planar substrate. In each case, this matches the lowest energy facet calculated for that particular phase.

Influence of inherent structure shear stress of supercooled liquids on their shear moduli

Configurations of supercooled liquids residing in their local potential minimum (i.e. in their inherent structure, IS) were found to support a non-zero shear stress. This IS stress was attributed to the constraint to the energy minimization imposed by boundary conditions, which keep size and shape of the simulation cell fixed. In this paper we further investigate the influence of these boundary conditions on the IS stress. We investigate its importance for the computation of the low frequency shear modulus of a glass obtaining a consistent picture for the low- and high frequency shear moduli over the full temperature range. Hence, we find that the IS stress corresponds to a non-thermal contribution to the fluctuation term in the Born-Green expression. This leads to an unphysical divergence of the moduli in the low temperature limit if no proper correction for this term is applied. Furthermore, we clarify the IS stress dependence on the system size and put its origin on a more formal basis.