950 resultados para micro c T
Resumo:
The absolute calibration of a microchannel plate (MCP) assembly using a Thomson spectrometer for laser-driven ion beams is described. In order to obtain the response of the whole detection system to the particles’ impact, a slotted solid state nuclear track detector (CR-39) was installed in front of the MCP to record the ions simultaneously on both detectors. The response of the MCP (counts/particles) was measured for 5–58 MeV carbon ions and for protons in the energy range2–17.3 MeV. The response of the MCP detector is non-trivial when the stopping range of particles becomes larger than the thickness of the detector. Protons with energiesE>~ 10 MeV are energetic enough that they can pass through the MCP detector. Quantitative analysis of the pits formed in CR-39 and the signal generated in the MCP allowed to determine the MCP response to particles in this energy range. Moreover, a theoretical model allows to predict the response of MCP at even higher proton energies. This suggests that in this regime the MCP response is a slowly decreasing function of energy, consistently with the decrease of the deposited energy. These calibration data will enable particle spectra to be obtained in absolute terms over a broad energy range.
Resumo:
We analyze four extreme AGN transients to explore the possibility that they are caused by rare, high-amplitude microlensing events. These previously unknown type-I AGN are located in the redshift range 0.6-1.1 and show changes of > 1.5 magnitudes in the g-band on a timescale of ~years. Multi-epoch optical spectroscopy, from the William Herschel Telescope, shows clear differential variability in the broad line fluxes with respect to the continuum changes and also evolution in the line profiles. In two cases a simple point-source, point-lens microlensing model provides an excellent match to the long-term variability seen in these objects. For both models the parameter constraints are consistent with the microlensing being due to an intervening stellar mass object but as yet there is no confirmation of the presence of an intervening galaxy. The models predict a peak amplification of 10.3/13.5 and an Einstein timescale of 7.5/10.8 years respectively. In one case the data also allow constraints on the size of the CIII] emitting region, with some simplifying assumptions, to to be ~1.0-6.5 light-days and a lower limit on the size of the MgII emitting region to be > 9 light-days (half-light radii). This CIII] radius is perhaps surprisingly small. In the remaining two objects there is spectroscopic evidence for an intervening absorber but the extra structure seen in the lightcurves requires a more complex lensing scenario to adequately explain.
Resumo:
Green energy and Green technology are the most of the quoted terms in the context of modern science and technology. Technology which is close to nature is the necessity of the modern world which is haunted by global warming and climatic alterations. Proper utilization of solar energy is one of the goals of Green Energy Movement. The present thesis deals with the work carried out in the eld of nanotechnology and its possible use in various applications (employing natural dyes) like solar cells. Unlike arti cial dyes, the natural dyes are available, easy to prepare, low in cost, non-toxic, environmentally friendly and fully biodegradable. Looking to the 21st century, the nano/micro sciences will be a chief contributor to scienti c and technological developments. As nanotechnology progresses and complex nanosystems are fabricated, a growing impetus is being given to the development of multi-functional and size-dependent materials. The control of the morphology, from the nano to the micrometer scales, associated with the incorporation of several functionalities can yield entirely new smart hybrid materials. They are special class of materials which provide a new method for the improvement of the environmental stability of the material with interesting optical properties and opening a land of opportunities for applications in the eld of photonics. Zinc oxide (ZnO) is one such multipurpose material that has been explored for applications in sensing, environmental monitoring, and bio-medical systems and communications technology. Understanding the growth mechanism and tailoring their morphology is essential for the use of ZnO crystals as nano/micro electromechanical systems and also as building blocks of other nanosystems.
Resumo:
La compréhension et la modélisation de l’interaction de l’onde électromagnétique avec la neige sont très importantes pour l’application des technologies radars à des domaines tels que l’hydrologie et la climatologie. En plus de dépendre des propriétés de la neige, le signal radar mesuré dépendra aussi des caractéristiques du capteur et du sol. La compréhension et la quantification des différents processus de diffusion du signal dans un couvert nival s’effectuent à travers les théories de diffusions de l’onde électromagnétique. La neige, dans certaines conditions, peut être considérée comme un milieu dense lorsque les particules de glace qui la composent y occupent une fraction volumique considérable. Dans un tel milieu, les processus de diffusion par les particules ne se font plus de façon indépendante, mais de façon cohérente. L’approximation quasi-cristalline pour les milieux denses est une des théories élaborées afin de prendre en compte ces processus de diffusions cohérents. Son apport a été démontré dans de nombreuses études pour des fréquences > 10 GHz où l’épaisseur optique de la neige est importante et où la diffusion de volume est prédominante. Par contre, les capteurs satellitaires radar présentement disponibles utilisent les bandes L (1-2GHz), C (4-8GHz) et X (8-12GHz), à des fréquences principalement en deçà des 10 GHz. L’objectif de la présente étude est d’évaluer l’apport du modèle de diffusion issu de l’approximation quasi-cristalline pour les milieux denses (QCA/DMRT) dans la modélisation de couverts de neige sèches en bandes C et X. L’approche utilisée consiste à comparer la modélisation de couverts de neige sèches sous QCA/DMRT à la modélisation indépendante sous l’approximation de Rayleigh. La zone d’étude consiste en deux sites localisés sur des milieux agricoles, près de Lévis au Québec. Au total 9 champs sont échantillonnés sur les deux sites afin d’effectuer la modélisation. Dans un premier temps, une analyse comparative des paramètres du transfert radiatif entre les deux modèles de diffusion a été effectuée. Pour des paramètres de cohésion inférieurs à 0,15 à des fractions volumiques entre 0,1 et 0,3, le modèle QCA/DMRT présentait des différences par rapport à Rayleigh. Un coefficient de cohésion optimal a ensuite été déterminé pour la modélisation d’un couvert nival en bandes C et X. L’optimisation de ce paramètre a permis de conclure qu’un paramètre de cohésion de 0,1 était optimal pour notre jeu de données. Cette très faible valeur de paramètre de cohésion entraîne une augmentation des coefficients de diffusion et d’extinction pour QCA/DMRT ainsi que des différences avec les paramètres de Rayleigh. Puis, une analyse de l’influence des caractéristiques du couvert nival sur les différentes contributions du signal est réalisée pour les 2 bandes C et X. En bande C, le modèle de Rayleigh permettait de considérer la neige comme étant transparente au signal à des angles d’incidence inférieurs à 35°. Vu l’augmentation de l’extinction du signal sous QCA/DMRT, le signal en provenance du sol est atténué d’au moins 5% sur l’ensemble des angles d’incidence, à de faibles fractions volumiques et fortes tailles de grains de neige, nous empêchant ainsi de considérer la transparence de la neige au signal micro-onde sous QCA/DMRT en bande C. En bande X, l’augmentation significative des coefficients de diffusion par rapport à la bande C, ne nous permet plus d’ignorer l’extinction du signal. La part occupée par la rétrodiffusion de volume peut dans certaines conditions, devenir la part prépondérante dans la rétrodiffusion totale. Pour terminer, les résultats de la modélisation de couverts de neige sous QCA/DMRT sont validés à l’aide de données RADARSAT-2 et TerraSAR-X. Les deux modèles présentaient des rétrodiffusions totales semblables qui concordaient bien avec les données RADARSAT-2 et TerraSAR-X. Pour RADARSAT-2, le RMSE du modèle QCA/DMRT est de 2,52 dB en HH et 2,92 dB en VV et pour Rayleigh il est de 2,64 dB en HH et 3,01 dB en VV. Pour ce qui est de TerraSAR-X, le RMSE du modèle QCA/DMRT allait de 1,88 dB en HH à 2,32 dB en VV et de 2,20 dB en HH à 2,71 dB en VV pour Rayleigh. Les valeurs de rétrodiffusion totales des deux modèles sont assez similaires. Par contre, les principales différences entre les deux modèles sont bien évidentes dans la répartition des différentes contributions de cette rétrodiffusion totale.
Resumo:
In this research, micro and nanoparticles of Spirulina platensis dead biomass were obtained, characterized and employed to removal FD&C red no. 40 and acid blue 9 synthetic dyes from aqueous solutions. The effects of particle size (micro and nano) and biosorbent dosage (from 50 to 750 mg) were studied. Pseudofirst order, pseudo-second order and Elovich models were used to evaluate the biosorption kinetics. The biosorption nature was verified using energy dispersive X-ray spectroscopy (EDS). The best results for both dyes were found using 250 mg of nanoparticles, in these conditions, the biosorption capacities were 295 mg g−1 and 1450 mg g−1, and the percentages of dye removal were 15.0 and 72.5% for the FD&C red no. 40 and acid blue 9, respectively. Pseudo-first order model was the more adequate to represent the biosorption of both dyes onto microparticles, and Elovich model was more appropriate to the biosorption onto nanoparticles. The EDS results suggested that the dyes biosorption onto microparticles occurred mainly by physical interactions, and for the nanoparticles, chemisorption was dominant.
Resumo:
Sistema de coloración de superficies mediante el empleo de soluciones de partículas nanoscópicas metálicas depositadas sobre la superficie del objeto a tintar. Al no suponer un recubrimiento completo de la superficie, como el que se da en depósitos moleculares, sino un depósito discreto de partículas, dejará pasar los detalles originales de la superficie. Este método presenta la ventaja de que el color se controla mediante la elección del tipo de partícula o mezcla de ellas y no únicamente mediante el control del espesor de la lámina depositada, en el caso de deposiciones moleculares. Lo parámetros de control y diseño son: forma de las partículas, tamaño de las partículas, relación de aspecto de las mismas, naturaleza material de las partículas, concentración de partículas, relación de mezcla de las partículas.
Resumo:
Tese submetida à Universidade de Coimbra, Faculdade de Ciências e Tecnologia e aprovada em provas públicas para a obtenção do Grau de Doutor em Engenharia Mecânica (especialidade de Ciência dos Materiais)
Resumo:
Le présent document constitue une réflexion sur de nouvelles avenues d'une philosophie coopérative, tablant sur le potentiel du secteur informel par le biais du développement des micro-entreprises. La connaissance des lois de fonctionnement du secteur informel jettera une compréhension plus nuancée sur le rôle de la micro-entreprise dans les pays en voie de développement et son aptitude à s'articuler autour du mode coopératif comme agent socio-économique. Cette réflexion se veut le prolongement de la réorientation de politique du Ministère des relations extérieures que Mme Monique Vézina annonça le 13 juin '86. "On ne peut pas faire de l'aide au développement international sans passer par la base." et "...Le maître d'œuvre de tout projet de développement sur le terrain, c'est le conseil du village, le paysan, ou le petit entrepreneur. Notre philosophie s'appuie sur le dynamisme des populations
Resumo:
International audience
Resumo:
International audience
Resumo:
Introduction: One of the most common strategies for pain control during and after surgical procedures is the use of local anesthetics. Prolonged analgesia can be safely achieved with drug delivery systems suitably chosen for each local anesthetic agent.Areas covered: This review considers drug delivery formulations of local anesthetics designed to prolong the anesthetic effect and decrease toxicity. The topics comprise the main drug delivery carrier systems (liposomes, biopolymers, and cyclodextrins) for infiltrative administration of local anesthetics. A chronological review of the literature is presented, including details of formulations as well as the advantages and pitfalls of each carrier system. The review also highlights pharmacokinetic data on such formulations, and gives an overview of the clinical studies published so far concerning pain control in medicine and dentistry.Expert opinion: The design of novel drug delivery systems for local anesthetics must focus on how to achieve higher uploads of the anesthetic into the carrier, and how to sustain its release. This comprehensive review should be useful to provide the reader with the current state-of-art regarding drug delivery formulations for local anesthetics and their possible clinical applications.
Resumo:
Objective: To evaluate macro and micronutrients intake of adolescents living with HIV/AIDS in use of antiretroviral therapy and compare it to the Dietary Reference Intakes. Methodology: Cross-sectional study conducted with adolescents of both genders with HIV/AIDS, assessing the dietary composition of macro and micronutrients, using the 24h dietary recall. Results: 39 adolescents, average age of 15 years, 51.3% males. The participants intake of total calories, total fiber (g/d), liposoluble vitamins (A, D, E, K), vitamin B5 (mg/d), vitamin B9 (mg/d), vitamin C (mg/d), calcium (mg/d), phosphorus (mg/d), potassium (mg/d), and magnesium (mg/d) was lower than recommended. The percentages of intake lower than recommended were 79.5% for calories, 82.1% for total fibers, 89.7% for vitamin A, 100% for vitamin D, 87.2% for vitamin E, 100% for vitamin K, 71.8% for vitamin B5, 82.1% for vitamin B9, 76.9% for vitamin C, 92.3% for calcium, 61.5% for phosphorus, 97.4% for potassium, and 76.9% for magnesium. The participants ingested more carbohydrates (g), proteins (g), vitamins B2 (mg/d), B3 (mg/d), B8 (mg/d) and sodium (g/d) than recommended, the percentages above the recommendations being 92.3% for carbohydrates, 64.1% for proteins and vitamin B2, 56.4% for vitamin B3, 82.1% for vitamin B8, and 59% for sodium. The remaining nutrients were within the amounts recommended by the DRIs. Conclusion: Food intake was inadequate as compared to the recommendations of the International Nutrition Guidelines.
Estratégias de internacionalização das micro e pequenas empresas do sector de moda praia de Salvador
Resumo:
Este estudo tem por objectivo conhecer as estratégias de internacionalização das micro e pequenas empresas do sector de moda praia de Salvador, procurando compreender e desenvolver as condições para promover uma cultura de internacionalização. O estudo caracteriza-se por uma abordagem mista, conciliando uma análise qualitativa, com uma quantitativa, sendo o inquérito, o método utilizado para a recolha de dados. Pretende-se obter informações sobre as características destas empresas com intuito de analisa-las e identificar a etapa em que se encontram relativamente ao processo de internacionalização. Como resultado verificou-se que estas empresas ainda estão num processo muito inicial de internacionalização, a exportação configura-se apenas como uma actividade acessória, aquém de uma estratégia consolidada de internacionalização. Estas empresas acabam por não dispor de uma estrutura e dimensão que permita encetar esses esforços sem o apoio de conjunto de políticas de incentivo e suporte à internacionalização. ABSTRACT: The objective of this study is to identify the intemationalization strategies of Salvador's micro and small enterprises of Beachwear, seeking to comprehend and develop the conditions to promote a culture of internationalization. The study is characterized by a mixed approach, combining a qualitative analysis with a quantitative, being the inquiry, the method used to collect the data The aim is to obtain information's about the characteristics of this enterprises, with the goal to analyse them and identify in which stage of the internationalization process their situated in. As a result, it was verified that this enterprise are still in a very primary stage of internationalization, the exportation is viewed only has an accessory activity, lacking in a consolidated strategy of internationalization. This enterprises end up with having no structure and dimension to enable them to accomplish those efforts, without a set of internationalization incentive and support policies.
Resumo:
Nanostructured carbons with relatively high nitrogen content (3–8%) and different micro and mesoporosity ratio were prepared by activation of polyaniline (PANI) with a ZnCl2–NaCl mixture in the proportion of the eutectic (melting point 270 °C). It was found that the activated carbons consisted of agglomerated nanoparticles. ZnCl2 plays a key role in the development of microporosity and promotes the binding between PANI nanoparticles during heat treatment, whereas NaCl acts as a template for the development of mesoporosity of larger size. Carbons with high micropore and mesopore volumes, above 0.6 and 0.8 cm3/g, respectively, have been obtained. Furthermore, these materials have been tested for CO2 capture and storage at pressures up to 4 MPa. The results indicate that the nitrogen groups present in the surface do not seem to affect to the amount of CO2 adsorbed, not detecting strong interactions between CO2 molecules and nitrogen functional groups of the carbon, which are mainly pyridinic and pyrrolic groups.
Resumo:
199 p.