Randomized comparisons among health informatics students identify hypertutorial features as improving web-based instruction.

Hypertutorials optimize five features - presentation, learner control, practice, feedback, and elaborative learning resources. Previous research showed graduate students significantly and overwhelmingly preferred Web-based hypertutorials to conventional "Book-on-the-Web" statistics or research design lessons. The current report shows that the source of hypertutorials' superiority in student evaluations of instruction lies in their hypertutorial features. Randomized comparisons between the two methodologies were conducted in two successive iterations of a graduate level health informatics research design and evaluation course. The two versions contained the same text and graphics, but differed in the presence or absence of hypertutorial features: Elaborative learning resources, practice, feedback, and amount of learner control. Students gave high evaluations to both Web-based methodologies, but consistently rated the hypertutorial lessons as superior. Significant differences localized in the hypertutorial subscale that measured student responses to hypertutorial features.

The Spanish variety of Malaga: From real to mental to virtual speech

Internet has affected our lives and society in manifold ways, and partly, in fundamental ways. Therefore, it is no surprise that one of the affected areas is language and communication itself. Over the last few years, online social networks have become a widespread and continuously expanding medium of communication. Being a new medium of social interaction, online social networks produce their own communication style, which in many cases differs considerably from real speech and is also perceived differently. The focus of analysis of my PhD thesis is how social network users from the city of Malaga create this virtual style by means of phonic features typical of the Andalusian variety of Spanish and how the users’ language attitude has an influence on the use of these phonic features. The data collection was fourfold: 1) a main corpus was compiled from 240 informants’ utterances on Facebook and Tuenti; 2) a corpus constituted of broad transcriptions of recordings with 120 people from Malaga served as a comparison; 3) a survey in which 240 participants rated the use of said phonetic variants on the following axes: “good–bad”, “correct–incorrect” and “beautiful–ugly” was carried out; 4) a survey with 240 participants who estimated with which frequency the analysed features are used in Malaga was conducted. For the analysis, which is quantitative and qualitative, ten variables were chosen. Results show that the studied variants are employed differently in virtual and real speech depending on how people perceive these variants. In addition, the use of the features is constrained by social factors. In general, people from Malaga have a more positive attitude towards non-­‐standard features if they are used in virtual speech than in real speech. Thus, virtual communication is seen as a style serving to create social meaning and to express linguistic identity. These stylistic practices reflect an amalgam of social presuppositions about usage conventions and individual strategies for handling a new medium. In sum, the virtual style is an initiative deliberately taken by the users, to create their, real and virtual, identities, and to define their language attitudes towards the features of their variety of speech.

Sticking to Syntax: The Reflection of Story Grammar in Children's and Adult's Recall of Radio and Television Shows

Two studies were conducted to determine how well story grammar predicted recall of televised stories. In Experiment 1, preschoolers viewed a non-narrated televised story from "Sesame Street." In Experiment 2, preschoolers and adults were administered a narrative via television or radio. In both studies, subjects' retention reflected recall of nodal information, regardless of medium of input.

Projecting a relevant "next": Instruction sequences in driving lessons

Car interaction and the organisation of multi-activity in cars have become a fertile topic of research within CA and EM (Laurier 2005, Haddington & Keisanen 2009). While previous research has focused exclusively on everyday car rides, in this paper we will analyse a specific kind of car interaction, namely driving lessons. In addition to"driving" and"talking", as the two main parallel activities in everyday car rides (Mondada in press), in driving lessons a central activity is"instructing", that we understand to be a collaborative accomplishment (Sanchez Svensson et al. 2009). Drawing on a corpus of 7 video-recorded driving lessons, we will analyse the sequential organisation of"instruction sequences", i.e. of those actions that are initiated by the driving instructor with a turn projecting the next relevant action to be executed by the learner. Learners carry out next actions in two different ways: a) as"single" actions (e.g. using the indicator); b) as a complex series of overlapping or parallel actions. We will show that"single" actions occur as responses to instructions concerning the learner's command of the car, while complex actions occur when the instructors formulate direction indications. The aims of our analyses are twofold. Firstly, we will analyse how instruction sequences are fitted to the emerging contingencies of the car ride (movement in space, changing environment): we will show that a) the turn format of the instruction initiation displays the degree of"urgency" of the requested action; b) learners have the possibility to start the relevant"next" before the instruction initiation comes to completion. Secondly, we will focus on those"seconds" that the driving instructor treats as problematic by initiating a repair sequence (e.g. an improper use of the indicator). Our research contributes to the discussion about the multimodal resources that participants can employ to fulfil a projected action. In addition, it offers insights in a hitherto scarcely investigated topic, namely the organisation of instructions and the ecology of apprenticeship. References HADDINGTON, P. & KEISANEN, T. (2009) Location, mobility and the body as resources in selecting a route. Journal of Pragmatics 41 (10), 1938-1961. LAURIER, Eric (2005): Searching for a parking space. Intellectica 41-42/2-3: 101-116. MONDADA, Lorenza (in press). Talking and driving: multi-activity in the car. Semiotica. SANCHEZ SVENSSON, M. et al. (2009) "Embedding instruction in practice: contingency and collaboration during surgical training", Sociology of Health & Illness, 31/6: 889-906.

Selective uptake, distribution, and redistribution of Cd-109, Co-57, Zn-65, Ni-63, and Cs-134 via xylem and phloem in the heavy metal hyperaccumulator Solanum nigrum L

The focus of this article was to explore the translocation of Cd-109, Co-57, Zn-65, Ni-63, and Cs-134 via xylem and phloem in the newly found hyperaccumulator Solanum nigrum L. Two experiments with the uptake via the roots and transport of Cd-109, Co-57, and Zn-65 labeled by roots, and the redistribution of Cd-109, Zn-65, Co-57, Ni-63, and Cs-134 using flap label in S. nigrum in a hydroponic culture with a standard nutrient solution were conducted. The results showed that Cd-109 added for 24 h to the nutrient medium of young plants was rapidly taken up, transferred to the shoot, and accumulated in the cotyledons and the oldest leaves but was not efficiently redistributed within the shoot afterward leading to a rather low content in the fruits. In contrast, Co-57 was more slowly taken up and released to the shoot, but afterward, this element was redistributed from older leaves to younger leaves and maturing fruits. Zn-65 was rapidly taken up and transferred to the shoot (mainly to the youngest leaves and not to the cotyledons). Afterward, this radionuclide was redistributed within the shoot to the youngest organs and finally accumulated in the maturing fruits. After flap labeling, all five heavy metals tested (Cd-109, Co-57, Zn-65, Ni-63, Cs-134) were exported from the labeled leaf and redistributed within the plant. The accumulation in the fruits was most pronounced for Ni-63 and Zn-65, while a relatively high percentage of Co-57 was finally found in the roots. Cs-134 was roughly in the middle of them. The transport of Cd-109 differed from that previously reported for wheat or lupin and might be important for the potential of S. nigrum to hyperaccumulate cadmium.

“Facebook Style”: The Use of Emoticons and Graphic Signs by Users in the Cape Flats

Over the last few years Facebook has become a widespread and continuously expanding medium of communication in Africa and worldwide. Being a new medium of social interaction, Facebook produces its own communication style. It is a style conditioned by the medium and the community of users. My focus of analysis is how Facebook users from the city of Cape Town create this style by means of emoticons and other graphic signs in order to reflect the reality of living in Cape Town’s underprivileged areas. This study is based on a theoretical framework which combines sociolinguistics with Computer-Mediated-Communication to study the emergence of a style peculiar of the online social networks. In a corpus of Coloured Facebook users from the Cape Flats, I have analysed the emergence of emoticons and other graphic signs related to Capetonian gang culture and then tracked the spread of these features to the extensive use by users not related to gangs. It can be deduced that in this process the analysed features amplify their meaning and are employed in a much broader context as their original use. Due to the development and spread of these features we can consider the peculiar electronic communication of Facebook as a style constrained by the electronic medium and its users. It is a style which serves the users to create social meaning and to express their linguistic identities.

An Undisclosed Story of Roses: Church, State and Nation in Contemporary Georgia

I will attempt to problematize the typologies of nationalism when applied to the Georgian context, particularly in relationship to nationalism of President Mikheil Saakashvili. I will argue that the state-driven nationalism of post-Rose Revolution government was a hybrid form of ethno-cultural and civic which had elements of ethnic particularism towards the Orthodox Church. By reflecting on the growing assistance of Western institutions to Georgia, I will problematize the extent to which the rise of American and European involvement in the region reinforced the perceptions of the “self” and the “other” among the religious elites since the Rose Revolution. By presenting field research data (interviews) gathered in 23 eparchies and perishes with religious clerics in 7 regions of Georgia, I will argue that religious nationalism in Georgia strengthened not in response to but as an outcome of President Saakashvili’s policies towards the church, and partially as a reaction to the growing dissatisfaction with Western institutions working in Georgia and Western governments’ response to the Russo-Georgian War of 2008. By reflecting on empirical material, the paper attempts to problematize an understanding of religious nationalism as a social movement, an instance of cultural autonomy and a source of identity (Friedland 2001). In response, I suggest viewing religious nationalism in post-communist Georgia as medium of material and political interests

Printed Narrative: The Festival Books for Archduke Ernest of Austria from Brussels and Antwerp 1594

Workshop „The Narrative in Eastern and Western Art“, Graduate School of Letters, Kyoto, 2-5 December 2013 Abstract by Ivo Raband, University of Berne Printed Narrative: The Festival Books for Ernest of Austria from Brussels and Antwerp 1594 During the early modern period the medium of the festival book became increasingly more important as an object of ‘political narration’ throughout Europe. Focusing on Netherlandish examples from the sixteenth and seventeenth centuries, my talk will focus on the festival books printed for the Joyous Entries of Archduke Ernest of Austria (1553–1595). Ernest was appointed Governor General of the Netherlands by King Philipp II in 1593, being the first Habsburg Prince to reside in Brussels since 30 years. In Brussels and Antwerp, the Archduke was greeted with the traditional Blijde Imkomst, Joyous Entry, which dates back to the fourteenth century and was a necessity to actually become the sovereign of Brabant and Antwerp and to uphold the privileges of the cities. Decorated with ephemeral triumphal arches, stages, and tableaux vivants, both cities welcomed Ernest and, at the same time, demonstrated their civic self-assurance and negotiated their statuses. In honor of these events of civic power, the city magistrates commissioned festival books. These books combine a Latin text with a description of the events and the ephemeral structures, including circa 30 engravings and etchings. Being the only visual manifestation of the Joyous Entries, the books became important representational objects. The prints featured in festival books will be my point of departure for discussing the importance of narrative political prints and the concept of the early modern festival book as a ‘political object’. By comparing the prints from Ernest’s entries with others from the period between 1549 and 1635, I will show how the prints became as important as the event itself. Thus, I want to pose the question of whether it would have been possible to substitute a printed version of the event for the actual ceremony.

Roles of Alix in regulating cell morphology

Mammalian Alix (ALG2-interacting protein X&barbelow;) is a conserved adaptor protein that is involved in endosomal trafficking, apoptosis and growth factor receptor turnover. Accumulating evidence also indicates that Alix plays roles in promoting/maintaining spread and aligned fibroblast morphology in monolayer culture. Since cell morphology is determined by the structure and dynamics of an integrin-mediated transmembrane protein network that links extracellular matrix to intracellular cytoskeleton, we hypothesized that Alix plays direct or indirect roles in regulating certain components or steps in this transmembrane protein network. To test this hypothesis, we first examined the subcellular localization of Alix and discovered that, as a predominantly cytoplasmic protein, Alix is also present on the substratum/cell surface and in the conditioned medium of fibroblast cultures. Further, precoating of culture surfaces with recombinant Alix promotes spreading and fibronectin assembly to NIH/3T3 cells, and siRNA-mediated Alix knockdown in W138 cells has the opposite effects. These findings indicate the extracellular functions of Alix in regulating cell spreading and extracellular matrix assembly. In a separate study, we analyzed Alix immunocomplexes from normal fibroblast W138 cells by mass spectrometry and identified actin as a major partner protein of Alix. Follow-up studies demonstrated that Alix preferentially binds filamentous actin (F-actin) in vitro and is required for maintaining normal F-actin content and proper actin cytoskeleton assembly in W138 cells. These findings establish direct and essential roles of Alix in regulating actin cytoskeleton. Finally, we investigated the effects of Alix knockdown on the activation and subcellular localization of FAK and Pyk2, the focal adhesion kinases required for cell spreading/migration by promoting turnover of integrin-mediated cell adhesions. We discovered that Alix knockdown inhibits FAK and Pyk2 localizations to focal adhesions or plasma membrane, in association with characteristics of reduced turnover of focal adhesions. These findings reveal a positive role of Alix in focal adhesion turnover. Based on these results, we conclude that Alix targets both intracellularly and extracellularly components to regulate extracellular matrix remodeling, actin cytoskeleton assembly and focal adhesion turnover. A combination of these three functions of Alix explains its crucial role in regulating spread and aligned fibroblast morphology. ^

Use of tabletop exercises for disaster preparedness training

Background. In public health preparedness, disaster preparedness refers to the strategic planning of responses to all types of disasters. Preparation and training for disaster response can be conducted using different teaching modalities, ranging from discussion-based programs such as seminars, drills and tabletop exercises to more complex operation-based programs such as functional exercises and full-scale exercises. Each method of instruction has its advantages and disadvantages. Tabletop exercises are facilitated discussions designed to evaluate programs, policies, and procedures; they are usually conducted in a classroom, often with tabletop props (e.g. models, maps or diagrams). ^ Objective. The overall goal of this project was to determine whether tabletop exercises are effective teaching modalities for disaster preparedness, with an emphasis on intentional chemical exposure. ^ Method. The target audience for the exercise was the Medical Reserve Brigade of the Texas State Guard, a group of volunteer healthcare providers and first responders who prepare for response to local disasters. A new tabletop exercise was designed to provide information on the complex, interrelated organizations within the national disaster preparedness program that this group would interact with in the event of a local disaster. This educational intervention consisted of a four hour multipart program that included a pretest of knowledge, lecture series, an interactive group discussion using a mock disaster scenario, a posttest of knowledge, and a course evaluation. ^ Results. Approximately 40 volunteers attended the intervention session; roughly half (n=21) had previously participated in a full scale drill. There was an 11% improvement in fund of knowledge between the pre- and post-test scores (p=0.002). Overall, the tabletop exercise was well received by those with and without prior training, with no significant differences found between these two groups in terms of relevance and appropriateness of content. However, the separate components of the tabletop exercise were variably effective, as gauged by written text comments on the questionnaire. ^ Conclusions. Tabletop exercises can be a useful training modality in disaster preparedness, as evidenced by improvement in knowledge and qualitative feedback on its value. Future offerings could incorporate recordings of participant responses during the drill, so that better feedback can be provided to them. Additional research should be conducted, using the same or similar design, in different populations that are stakeholders in disaster preparedness, so that the generalizability of these findings can be determined.^

REGULATION OF TOXIN SYNTHESIS BY CLOSTRIDIUM DIFFICILE

Clostridium difficile is the leading definable cause of nosocomial diarrhea worldwide due to its virulence, multi-drug resistance, spore-forming ability, and environmental persistence. The incidence of C. difficile infection (CDI) has been increasing exponentially in the last decade. Virulent strains of C. difficile produce either toxin A and/or toxin B, which are essential for the pathogenesis of this bacterium. Current methods for diagnosing CDI are mostly qualitative tests that detect the bacterium, the toxins, or the toxin genes. These methods do not differentiate virulent C. difficile strains that produce active toxins from non-virulent strains that do not produce toxins or produce inactive toxins. Based on the knowledge that C. difficile toxins A and B cleave a substrate that is stereochemically similar to the native substrate of the toxins, uridine diphosphoglucose, a quantitative, cost-efficient assay, the Cdifftox activity assay, was developed to measure C. difficile toxin activity. The concept behind the activity assay was modified to develop a novel, rapid, sensitive, and specific assay for C. difficile toxins in the form of a selective and differential agar plate culture medium, the Cdifftox Plate assay (CDPA). This assay combines in a single step the specific identification of C. difficile strains and the detection of active toxin(s). The CDPA was determined to be extremely accurate (99.8% effective) at detecting toxin-producing strains based on the analysis of 528 C. difficile isolates selected from 50 tissue culture cytotoxicity assay-positive clinical stool samples. This new assay advances and improves the culture methodology in that only C. difficile strains will grow on this medium and virulent strains producing active toxins can be differentiated from non-virulent strains. This new method reduces the time and effort required to isolate and confirm toxin-producing C. difficile strains and provides a clinical isolate for antibiotic susceptibility testing and strain typing. The Cdifftox activity assay was used to screen for inhibitors of toxin activity. Physiological levels of the common human conjugated bile salt, taurocholate, was found to inhibit toxin A and B in vitro activities. When co-incubated ex vivo with purified toxin B, taurocholate protected Caco-2 colonic epithelial cells from the damaging effects of the toxin. Furthermore, using a caspase-3 detection assay, taurocholate reduced the extent of toxin B-induced Caco-2 cell apoptosis. These results suggest that bile salts can be effective in protecting the gut epithelium from C. difficile toxin damage, thus, the delivery of physiologic amounts of taurocholate to the colon, where it is normally in low concentration, could be useful in CDI treatment. These findings may help to explain why bile rich small intestine is spared damage in CDI, while the bile salt poor colon is vulnerable in CDI. Toxin synthesis in C. difficile occurs during the stationary phase, but little is known about the regulation of these toxins. It was hypothesized that C. difficile toxin synthesis is regulated by a quorum sensing mechanism. Two lines of evidence supported this hypothesis. First, a small (KDa), diffusible, heat-stable toxin-inducing activity accumulates in the medium of high-density C. difficile cells. This conditioned medium when incubated with low-density log-phase cells causes them to produce toxin early (2-4 hrs instead of 12-16 hrs) and at elevated levels when compared with cells grown in fresh medium. These data suggested that C. difficile cells extracellularly release an inducing molecule during growth that is able to activate toxin synthesis prematurely and demonstrates for the first time that toxin synthesis in C. difficile is regulated by quorum signaling. Second, this toxin-inducing activity was partially purified from high-density stationary-phase culture supernatant fluid by HPLC and confirmed to induce early toxin synthesis, even in C. difficile virulent strains that over-produce the toxins. Mass spectrometry analysis of the purified toxin-inducing fraction from HPLC revealed a cyclic compound with a mass of 655.8 Da. It is anticipated that identification of this toxin-inducing compound will advance our understanding of the mechanism involved in the quorum-dependent regulation of C. difficile toxin synthesis. This finding should lead to the development of even more sensitive tests to diagnose CDI and may lead to the discovery of promising novel therapeutic targets that could be harnessed for the treatment C. difficile infections.

Estudio de las formas de aplicación de la fotografía sobre los materiales pétreos para la arquitectura = Study of photography application methods over architectural stony materials

Desde que el Hombre era morador de las cavernas ha sido manifiesto su deseo innato por grabar y reproducir "instantáneas con las que perpetuarse o sobre las que mirarse ". La aparición y desarrollo de la fotografía como medio para poder captar y fijar "la imagen directa de la realidad circundante " pronto se convierte en un nuevo lenguaje estético y poético que permite al artista la interpretación y reflexión de lo observado. Se imprime a la imagen el carácter de la mirada del fotógrafo, estableciendo un diálogo conceptual con el juego de luces. La presente Tesis plantea la creación de una nueva piel de arquitectura mediante la impresión fotográfica sobre materiales pétreos. La búsqueda de la expresividad de los materiales como soporte de expresión artística implica un cambio de escala al trasladar la instantánea fotográfica a la arquitectura y la aplicación de un nuevo soporte al imprimir la fotografía sobre materiales arquitectónicos. Se justifica la elección del dispositivo láser CO2 como sistema de impresión fotográfica sobre los materiales pétreos arquitectónicos, como la técnica que permite la unión física de la imagen y el proyecto arquitectónico, generando un valor añadido a través del arte de la fotografía. Se justifica la elección de los materiales investigados, Silestone® Blanco Zeus y GRC® con TX Active® Aria, de forma que la investigación de esta nueva piel de arquitectura abarca tanto la envolvente del edificio como su volumen interior, permitiendo cerrar el círculo arquitectónico "in&out" y dota al proyecto arquitectónico de un valor añadido al introducir conceptos sostenibles de carácter estético y medioambiental. Se realiza una consulta a las empresas del sector arquitectónico relacionadas directamente con la producción y distribución de los materiales Silestone® y GRC®, así como a las empresas especializadas en sistemas de impresión fotográfica sobre materiales, acerca del estado del arte. Se recorre la Historia de la fotografía desde sus orígenes hasta el desarrollo de la era digital y se analiza su condición artística. Se recopilan los sistemas de impresión fotográfica que han evolucionado en paralelo con los dispositivos de captura de la instantánea fotográfica y se describe en profundidad el sistema de impresión fotográfica mediante dispositivo láser CO2. Se describen los procesos de fabricación, las características técnicas, cualidades y aplicaciones de los materiales pétreos arquitectónicos Silestone® Blanco Zeus y GRC® con TX Active® Aria. Se explica la técnica utilizada para la captación de la imagen fotográfica, su justificación artística y su proceso de impresión mediante dispositivo láser CO2 bajo diferentes parámetros sobre muestras de los materiales arquitectónicos investigados. Se comprueba la viabilidad de desarrollo de la nueva piel de arquitectura sobre Silestone® Blanco Zeus y GRC® con TX Active® Aria sometiendo a las piezas impresas bajo diferentes parámetros a tres ensayos de laboratorio. En cada uno de ellos se concreta el objetivo y procedimiento del ensayo, la enumeración de las muestras ensayadas y los parámetros bajo los que han sido impresas, el análisis de los resultados del ensayo y las conclusiones del ensayo. Ensayo de amplitud térmica. Se determina el grado de afectación de las imágenes impresas bajo la acción de contrastes térmicos. Series de muestras de Silestone® Blanco Zeus y GRC® con TX Active® Aria impresas con láser CO2 se someten a ciclos de contraste frío-calor de 12 horas de duración para una amplitud térmica total de 102°C. Se realiza una toma sistemática de fotografías microscópicas con lupa de aumento de cada pieza antes y después de los ciclos frío-calor y la observación de las transformaciones que experimentan los materiales bajo la acción del láser CO2. Ensayo de exposición a la acción de la radiación ultravioleta (UV). Se determina el grado de afectación de las imágenes impresas al activar la capacidad autolimpiante de partículas orgánicas. Una serie de muestras de GRC® con TX Active® Aria impresa con láser CO2 se someten a ciclos de exposición de radiación ultravioleta de 26 horas de duración. Se somete la serie a un procedimiento de activación del aditivo TX Active®. Se simula la contaminación orgánica mediante la aplicación controlada de Rodamina B, tinte orgánico, y se simula la radiación UV mediante el empleo de una bombilla de emisión de rayos ultravioleta. Se realiza una toma sistemática de fotografías macroscópicas de la serie de muestras ensayadas: antes de aplicación de la Rodamina B, momento 00:00h, momento 04:00h y momento 26:00h del ensayo. Se procede a la descarga y análisis del histograma de las fotografías como registro de la actividad fotocatalítica. Ensayo de la capacidad autodescontaminante del GRC® con TX Active® impreso con láser CO2. Se comprueba si la capacidad autodescontaminante del GRC® con TX Active® se ve alterada como consecuencia de la impresión de la imagen fotográfica impresa con láser CO2. Serie de muestras de GRC® con TX Active® Aria impresa con láser CO2 se someten a test de capacidad autodescontaminante: atmósfera controlada y contaminada con óxidos de nitrógeno en los que se coloca cada pieza ensayada bajo la acción de una lámpara de emisión de radiación ultravioleta (UV). Se registra la actividad fotocatalítica en base a la variación de concentración de óxido de nitrógeno. Se recopila el análisis e interpretación de los resultados de los ensayos de laboratorio y se elaboran las conclusiones generales de la investigación. Se sintetizan las futuras líneas de investigación que, a partir de las investigaciones realizadas y de sus conclusiones generales, podrían desarrollarse en el ámbito de la impresión fotográfica sobre materiales arquitectónicos. Se describe el rendimiento tecnológico y artístico generado por las investigaciones previas que han dado origen y desarrollo a la Tesis Doctoral. ABSTRACT Since ancient time, humanity has been driven by an innate wish to reproduce and engrave "snapshots that could help to perpetúate or to look at one self". Photography's birth and its development as a mean to capture and fix "the direct image of the surrounding reality" quickly becomes a new aesthetical and poetical language allowing the artist to interpret and think over what has been observed. The photographer's eye is imprinted onto the image, and so the conceptual dialogue between the artist and the light beams begins. The current thesis suggests the creation of a new architectural skin through photography imprinting over stony materials. The search for material's expressiveness as a medium of artistic expression involves a change of scale as it transfers photographic snapshot into architecture and the use of a new photographic printing support over architectural materials. CO2 laser is the chosen printing system for this technique as it allows the physical union of the image and the architectonic project, generating an added value through the art of photography. The researched materials selected were Silestone®, Blanco Zeus and GRC® with TX Active® Aria. This new architectural skin contains the building surrounding as well as its interior volume, closing the architectonic "in & out" circle and adding a value to the project by introducing aesthetical and environmental sustainable concepts. Architecture companies related to the production and distribution of materials like Silestone® and GRC®, as well as companies specialized in photography printing over materials were consulted to obtain a State of the Art. A thorough analysis of photography's History from its origins to the digital era development was made and its artistic condition was studied in this thesis. In this study the author also makes a compilation of several photographic printing systems that evolved together with photographic snapshot devices. The CO2 laser-based photographic printing system is also described in depth. Regarding stony materials of architecture like Silestone®, Blanco Zeus and GRC® with TX Active® Aria, the present study also describes their manufacture processes as well as technical features, quality and application. There is also an explanation about the technique to capture the photographic image, its artistic justification and its CO2 laser-based printing system over the researched materials under different parameters. We also tested the feasibility of this new architectural skin over Silestone® Blanco Zeus and GRC® with TX Active® Aria. The pieces were tested under different parameters in three laboratory trials. Each trial comprises of an explanation of its objective and its process, the samples were numbered and the printing parameters were specified. Finally, with the analysis of the results some conclusions were drawn. In the thermal amplitude trial we tried to determine how printed images were affected as a result of the action of thermal contrasts. Series of samples of Silestone® Blanco Zeus and GRC® with TX Active® Aria printed with CO2 laser were subjected to several 12h warm-cold cycles for thermal total amplitude of 102oc. Each sample was captured systematically with microscopic enhanced lenses before and after cold-warm cycles. The changes experienced by these materials under the effect of CO2 laser were observed and recorded. Trial regarding the Ultraviolet Radiation (UR) effect on images. We determined to which extent printed images were affected once the self-cleaning organic particles were activated. This time GRC® with TX Active® Aria samples printed with CO2 laser were exposed to a 26h UR cycle. The samples were subjected to the activation of TX Active® additive. Through the controlled application of Rodamine B and organic dye we were able to simulate the organic contamination process. UR was simulated using an ultraviolet beam emission bulb. A systematic capture of macroscopic pictures of the tested sample series was performed at different time points: before Rodamine B application, at moment 00:00h, moment 04:00h and moment 26:00h of the trial. Picture's histogram was downloaded and analyzed as a log of photocatalytic activity. Trial regarding the self-decontaminating ability of GRC® with TX Active® printed with CO2 laser. We tested if this self-decontaminating ability is altered as a result of CO2 laser printed image. GRC® with TX Active® Aria samples printed with CO2 laser, were subject to self-decontaminating ability tests with controlled and nitrogen oxide contaminated atmosphere. Each piece was put under the action of an UR emission lamp. Photocatalytic activity was recorded according to the variation in nitrogen oxide concentration. The results of the trial and their interpretation as well as the general conclusions of the research are also compiled in the present study. Study conclusions enable to draw future research lines of potential applications of photographic printing over architecture materials. Previous research generated an artistic and technological outcome that led to the development of this doctoral thesis.

The influence of diet on the effectiveness of garlic oil and cinnamaldehyde to manipulate in vitro ruminal fermentation and methane production.

The objective of this study was to evaluate the effects of increasing doses [0 (control: CON), 20, 60, 180 and 540 mg/L incubation medium] of garlic oil (GO) and cinnamaldehyde (CIN) on in vitro ruminal fermentation of two diets. Batch cultures of mixed ruminal microorganisms were inoculated with ruminal fluid from four sheep fed a medium-concentrate diet (MC; 50 : 50 alfalfa hay : concentrate) or four sheep fed a high-concentrate diet (HC; 15 : 85 barley straw : concentrate). Diets MC and HC were representative of those fed to dairy and fattening ruminants, respectively. Samples of each diet were used as incubation substrates for the corresponding inoculum, and the incubation was repeated on 4 different days (four replicates per experimental treatment). There were GO × diet-type and CIN × diet-type interactions (P < 0.001–0.05) for many of the parameters determined, indicating different effects of both oils depending on the diet type. In general, effects of GO were more pronounced for MC compared with HC diet. Supplementation of GO did not affect (P > 0.05) total volatile fatty acid (VFA) production at any dose. For MC diet, GO at 60, 180 and 540 mg/L decreased (P < 0.05) molar proportion of acetate (608, 569 and 547 mmol/mol total VFA, respectively), and increased (P < 0.05) propionate proportion (233, 256 and 268 mmol/mol total VFA, respectively), compared with CON values (629 and 215 mmol/mol total VFA for acetate and propionate, respectively). A minimum dose of 180 mg of GO/L was required to produce similar modifications in acetate and propionate proportions with HC diet, but no effects (P > 0.05) on butyrate proportion were detected. Methane/VFA ratio was reduced (P < 0.05) by GO at 60, 180 and 540 mg/L for MC diet (0.23, 0.16 and 0.10 mol/mol, respectively), and by GO at 20, 60, 180 and 540 mg/L for HC diet (0.19, 0.19, 0.16 and 0.08 mol/mol, respectively), compared with CON (0.26 and 0.21 mol/mol for MC and HC diets, respectively). No effects (P = 0.16–0.85) of GO on final pH and concentrations of NH3-N and lactate were detected. For both diet types, the highest CIN dose decreased (P < 0.05) production of total VFA, gas and methane, which would indicate an inhibition of fermentation. Compared with CON, CIN at 180 mg/L increased (P < 0.05) acetate proportion for the MC (629 and 644 mmol/mol total VFA for CON and CIN, respectively) and HC (525 and 540 mmol/mol total VFA, respectively) diets, without affecting the proportions of any other VFA or total VFA production. Whereas for MC diet CIN at 60 and 180 mg/L decreased (P < 0.05) NH3-N concentrations compared with CON, only a trend (P < 0.10) was observed for CIN at 180 mg/L with the HC diet. Supplementation of CIN up to 180 mg/L did not affect (P = 0.18–0.99) lactate concentrations and production of gas and methane for any diet. The results show that effectiveness of GO and CIN to modify ruminal fermentation may depend on diet type, which would have practical implications if they are confirmed in vivo.

Effects of hydrogen assisted stress corrosion on damage tolerance of a high-strength duplex stainless steel wire for prestressing concrete

The study brings new insights on the hydrogen assisted stress corrosion on damage tolerance of a high-strength duplex stainless steel wire which concerns its potential use as active reinforcement for concrete prestressing. The adopted procedure was to experimentally state the effect of hydrogen on the damage tolerance of cylindrical smooth and precracked wire specimens exposed to stress corrosion cracking using the aggressive medium of the standard test developed by FIP (International Prestressing Federation). Stress corrosion testing, mechanical fracture tests and scanning electron microscopy analysis allowed the damage assessment, and explain the synergy between mechanical loading and environment action on the failure sequence of the wire. In presence of previous damage, hydrogen affects the wire behavior in a qualitative sense, consistently to the fracture anisotropy attributable to cold drawing, but it does not produce quantitative changes since the steel fully preserves its damage tolerance.

Assessing the suitability of student interactions from Moodle data logs as predictors of cross-curricular competencies

In the past decades, online learning has transformed the educational landscape with the emergence of new ways to learn. This fact, together with recent changes in educational policy in Europe aiming to facilitate the incorporation of graduate students to the labor market, has provoked a shift on the delivery of instruction and on the role played by teachers and students, stressing the need for development of both basic and cross-curricular competencies. In parallel, the last years have witnessed the emergence of new educational disciplines that can take advantage of the information retrieved by technology-based online education in order to improve instruction, such as learning analytics. This study explores the applicability of learning analytics for prediction of development of two cross-curricular competencies – teamwork and commitment – based on the analysis of Moodle interaction data logs in a Master’s Degree program at Universidad a Distancia de Madrid (UDIMA) where the students were education professionals. The results from the study question the suitability of a general interaction-based approach and show no relation between online activity indicators and teamwork and commitment acquisition. The discussion of results includes multiple recommendations for further research on this topic.