The growth and survival rate of (private) Oreochromis niloticus fingerlings fed with varying percentages of Leucaena leucocephala leaf meal based diets

A-ten-week feeding trial was carried out to evaluate the growth and survival rate of Oreochromis niloticus fed with varying percentage levels of Leucaena leucocephala leaf meal as a substitute for groundnut cake. The levels in the various diets were 0% - Diet 1, 25% - Diet 2, 50% - Diet 3 and 75% - Diet 4. Ten fingerlings with an average weight of 0.44g were stocked at the rate of 10 fish per bowl and fed at 5% body weight. Diet 1 with 0% inclusion of leucaena leaf meal gave a significant difference (P>0.05) in growth and survival rate compared with diets 2, 3 and 4. The water quality parameters recorded were appropriate for fish culture

Characterization of a multi-keV x-ray source produced by nanosecond laser irradiation of a solid target: The influence of laser focus spot and target thickness

The influence of focus spot and target thickness on multi-keV x-ray sources generated by 2 ns duration laser heated solid targets are investigated on the Shenguang II laser facility. In the case of thick-foil targets, the experimental data and theoretical analysis show that the emission volume of the x-ray sources is sensitive to the laser focus spot and proportional to the 3 power of the focus spot size. The steady x-ray flux is proportional to the 5/3 power of the focus spot size of the given laser beam in our experimental condition. In the case of thin-foil targets, experimental data show that there is an optimal foil thickness corresponding to the given laser parameters. With the given laser beam, the optimal thin-foil thickness is proportional to the -2/3 power of the focus spot size, and the optimal x-ray energy of thin foil is independent of focus spot size. (C) 2008 American Institute of Physics.

Effects of fermented fluted pumpkin leaf (Telfaria occidentalis) on the growth and nutrient utilization of Clarias (Clarias gariepinus)

Clarias (Clarias gariepinus) (Burshell, 1821) fingerlings were fed isonitrogenous diets (38.9% crude protein) with fermented fluted pumpkin leaves (FFPL) replacing different proportion (0,50,75,100%) of extruded soybean meal (ESM) for 8 weeks. Growth responses at the different substitution levels measured. Increasing FFPL intake resulted in better weight gains and higher specific growth rates (SGR) of 0.29, 0.36 and 0.38% per day respectively. The increase in growth from feeding diets containing 75% and 100% of the ESM replaced with FFPL were significantly higher (P<0.05) than those of other diets. Further more fish tissue protein deposition consistently increased with increasing level of FFPL concentration in their diets. Fish fed diets where whole ESM was replace 100% FFPL gave the best overall response in terms of their weight gain, food conversion ratio, protein efficiency ratio, and specific growth rate. Economic considerations indicate the replacement of ESM with FFPL, which is a cheaper ingredient in feeds for Clarias

Influence of target thickness on the generation of high-density ion bunches by ultrashort circularly polarized laser pulses

Ion acceleration by ultrashort circularly polarized laser pulse in a solid-density target is investigated using two-dimensional particle-in-cell simulation. The ions are accelerated and compressed by the continuously extending space-charge field created by the evacuation and compression of the target electrons by the laser light pressure. For a sufficiently thin target, the accelerated and compressed ions can reach and exit from the rear surface as a high-density high-energy ion bunch. The peak ion energy depends on the target thickness and reaches maximum when the compressed ion layer can just reach the rear target surface. The compressed ion layer exhibits lateral striation which can be suppressed by using a sharp-rising laser pulse. (c) 2008 American Institute of Physics.

Estimation of growth and financial analysis through the application of Ipil ipil (Leucaena leucocephala) leaf meal as supplements to soybean and fish meal in the diet of juvenile monosex tilapia (Oreochromis niloticus)

Among plant protein ingredients,ipil ipil (Leucaena leucocephala) leafmeal (ILLM) is considered the most nutritive plant protein source after soybean meal in aquatic feeds. That was proven in a 21-day experiment conducted to assess the response of juvenile Monosex Nile tilapia Oreochromis niloticus with four iso-nitrogenous formulated diets: One control diet was formulated based on fishmeal, one on soybean meal and one on rice bran, ipil ipil leafmeal was also included in experimental diets.

Application of ipil- ipil leaf meal (IILM) as feed Ingredient for Monosex tilapia fry (oreochronis niioticus) : In terms of growth and economics

The Ipil-ipil (Leucaena leucocephal) leaf analyzed for crude protein (CP), fat, crude fibre (CF), ash content, moisture content and nitrogen free extract (NFE). The CP 23± 0.12 % , fat 8 ± 0.11 %, CF 18 ± 0.15 % , ash 10 ± 0.13 %, moisture 14. ± .16% and NFE 29.± 1.10 % were recorded. A twenty one days experiment was conduced to assess the response of juvenile monosex tilapia with different iso-nitrogenous formulated diets for find out the feasibility study of using ipil-ipil leaf meals as feed ingredient for juvenile tilapia. Three experimental diets were formulated by using fish meal, soybean meal, rice bran and ipil ipil leaf meal. One control diet was formulated by using fish meal, soybean meal and rice bran. Considering the high demand, limited availability of fish meal and soybean meal, ipil ipil leaf meal was incorporated in juvenile tilapia feed. Among plant protein ingredients ipil ipil leaf meal was considered as the most nutritive plant protein source after soybean meal. However, high concentration of toxic element limited the incorporation level of ipil ipil leaf meal in fish feed. Use of 15 % ipil ipil leaf meal in fish feed was more significant from the view of growth performance and economics. The higher Absolute Growth was 1119.26 gm, higher Specific Growth Rate was 6.52% /day higher Feed Conversion Efficiency was 41.23% , higher Protein Efficiency Ratio was 1.178 and higher Average Daily Growth rate was 14.00% recorded in diet-4 ( which contained 15% IILM). The lower Feed Conversion Ratio 2.42 and lower cost for per unit production 34.65 taka/kg were recorded in diet-4. The higher cost for per unit fish production 45.6 tk./kg was recorded for diet-1 where no ipil ipil leaf meal.. The results suggest that tree legumes Ipil-ipil (Leucaena leucocephal) leaf has potential and excellent source of feed ingredients as protein supplements for juvenile monosex

Caracterização das estratégias ecofisiológicas de samambaias em resposta à inundação na restinga de Maricá, Rio de Janeiro, Brasil

As matas inundáveis e brejos presentes nas restingas desencadeiam uma série de processos que influenciam as características físico-químicas e biológicas do solo, levando as plantas a apresentarem mecanismos de aclimatação ou adaptação ao estresse da inundação, como alterações morfológicas e fisiológicas de forma a minimizar os efeitos da falta de oxigênio. Dentre as espécies vegetais de samambaias ocorrentes em ambientes inundáveis nas restingas, se destacam três espécies: Acrostichum danaeifolium Langsd. & Fisch., Blechnum serrulatum Rich. e Thelypteris interrupta (Willd.) K.Iwats. O objetivo deste trabalho é caracterizar os aspectos ecofisiológicos que os esporófitos dessas samambaias apresentam para sobreviver em ambientes de inundação na restinga de Maricá, estado do Rio de Janeiro. Neste sentido, foi determinada a caracterização física e química dos sítios de ocorrências destas samambaias, as variações foliares entre elas, espessura, densidade, massa por unidade de folha, teor de clorofilas e atributos quantitativos das células epidérmicas, além da quantificação e determinação à distribuição dos carboidratos. Para as variáveis dos vegetais foram feitas coletas na estação chuvosa e seca e para variáveis do solo na estação seca. Os sítios analisados se mostraram extremamente ácidos, de baixa fertilidade e com toxidez por macro e micro nutrientes, indicando que as samambaias apresentam tolerância a estes fatores. Na época chuvosa (inundação), as samambaias apresentaram queda na densidade foliar, acompanhada de um aumento de massa por unidade de folha. Esta habilidade de conseguir ganhar massa seca por área classifica todas as samambaias analisadas como tolerantes à inundação. Os altos valores de carboidratos solúveis nas folhas indicam aumento da degradação do amido foliar e o menor teor de carboidrato solúvel encontrado nos caules explicita a redução na respiração das raízes destas plantas sob anoxia/ hipoxia, para evitar a oxidação e o incremento do estoque de amido de reserva, elucidando estratégia de tolerância à inundação. A menor disponibilidade de água na estação seca afeta diretamente os atributos foliares diminuindo o índice estomático, a suculência e a massa por unidade de folha, no qual reflete na queda das concentrações de clorofilas. Os menores valores nas concentrações de clorofila têm influencia direta na presença de amidos foliar que são estocado e, alterando toda a dinâmica dos carboidratos nestas espécies. A análise do sítio onde cresce Acrostichum danaeifolium indica níveis críticos de Na no solo e provavelmente, a produção de mucilagem no caule e no pecíolo é uma estratégia de tolerância ao ambiente salino e inundado. O elevado índice de cobertura de Blechnum serrulatum em ambientes inundados indica que esta espécie possui adaptações a solos hidromórficos, entre elas, grande capacidade de estocagem de amido no caule. A maior sinuosidade das células epidérmicas em T. interrupta permite uma alta suculência mantendo o status hidrológico da folha em ambas as estações. Os resultados apresentados, além de agregar informações sobre a biologia das samambaias nos neotrópicos, irão contribuir para a compreensão da dinâmica de ocupação de espécies herbáceas em ambientes alagáveis nas restingas brasileiras

Stress analysis of ZrO2/SiO2 multilayers deposited on different substrates with different thickness periods

The effects of repeating thickness periods on stress are studied in ZrO2/SiO2 multilayers deposited by electron-beam evaporation on BK7 glass and fused-silica substrates. The results show that the residual stress is compressive and decreases with an increase of the periods of repeating thickness in the ZrO2/SiO2 multilayers. At the same time, the residual stress in multilayers deposited on BK7 glass is less than that of samples deposited on fused silica. The variation of the microstructure examined by x-ray diffraction shows that microscopic deformation does not correspond to macroscopic stress, which may be due to variation of the interface stress. (c) 2005 Optical Society of America.

Influence of buffer layer thickness on the structure and optical properties of ZnO thin films

A series of ZnO thin films were deposited on ZnO buffer layers by DC reactive magnetron sputtering. The buffer layer thickness determination of microstructure and optical properties of ZnO films was investigated by X-ray diffraction (XRD), photoluminescence (PL), optical transmittance and absorption measurements. XRD results revealed that the stress of ZnO thin films varied with the buffer layer thickness. With the increase of buffer layer thickness, the band gap edge shifted toward longer wavelength. The near-band-edge (NBE) emission intensity of ZnO films deposited on ZnO buffer layer also varied with the increase of thickness due to the spatial confinement increasing the Coulomb interaction between electrons and holes. The PL measurement showed that the optimum thickness of the ZnO buffer layer was around 12 nm. (c) 2005 Elsevier B.V. All rights reserved.

Thickness dependence of structure and optical properties of silver films deposited by magnetron sputtering

A series of silver films with different thickness were prepared under identical conditions by direct current magnetron sputtering. The optical properties of the silver films were measured using spectrophotometric techniques and the optical constants were calculated from reflection and transmission measurements made at near normal incidence. The results show that the optical properties and constants are affected by films' thickness. Below the critical thickness of 17 nm at which Ag film forms a continuous film, the optical properties and constants vary significantly as the thickness of films increases and then tends to a stable value which is reached at 41 nm. X-ray diffraction measurements were carried out to examine the structure and stress evolution of the Ag films as a function of films' thickness. It was found that the interplanar distance of (111) orientation decreases when the film thickness increases and tends to be close to that of bulk material. The compressive strains also decrease with increasing thickness. (C) 2007 Published by Elsevier B.V.