Consumo alimentar e associação com ganho de peso em adolescente: Estudo Longitudinal de Avaliação Nutricional de Adolescentes (ELANA).

Essa tese teve como objetivo avaliar a associação do consumo de padrões alimentares e produtos alimentícios ultraprocessados (UP) sobre indicadores antropométricos e sua variação entre adolescentes. Para tal, foram analisados os dados de 1.031 estudantes de quatro escolas privadas e duas escolas públicas da região metropolitana do Rio de Janeiro que foram acompanhados por três anos consecutivos (2010 a 2012) no Estudo Longitudinal de Avaliação Nutricional de adolescentes (ELANA). Os resultados estão apresentados em três manuscritos que compõem a tese. O primeiro manuscrito identificou três padrões alimentares: Ocidental, composto por massas, embutidos e bacon, carnes, doces, bebidas açucaradas, salgados e fast food, biscoito, pães e cereais, leite e derivados e ovos, o Saudável, caracterizado por peixes, hortaliças, verduras, raízes e feculentos, frutas e sucos e o Arroz/Feijão, composto pelo consumo de arroz, feijão e café. Na análise dos dados na linha de base o padrão Ocidental associou-se a um menor índice de massa corporal (IMC) e não foi observada associação estatisticamente significativa em relação ao percentual de gordura corpórea (%GC) e o padrão em questão. Adicionalmente, foi verificada uma associação negativa entre o padrão Arroz/Feijão e ambos os indicadores antropométricos sugerindo que esse padrão de consumo tradicional possa ser protetor para a obesidade. No segundo manuscrito avaliou-se a relação entre o consumo de UP e indicadores de qualidade da dieta. O consumo de UP foi avaliado em gramas por dia e em gramas/total de calorias. Observou-se um aumento das variáveis marcadoras de alimentação não saudável e saudável com o aumento do consumo de UP. No entanto, quando relacionados ao aumento de consumo de UP/energia observou-se um aumento de marcadores de alimentação não saudável e, com exceção da vitamina C, uma redução de marcadores de alimentação saudável. Assim, a densidade do consumo de UP mostrou-se um bom indicador de qualidade da dieta entre adolescentes. No terceiro manuscrito avaliou-se a associação entre o consumo de UP e a evolução temporal do IMC e %GC. A análise longitudinal por modelos lineares mistos, que levam em conta todas as observações ao longo do tempo, indicou que nas análises não ajustados havia uma associação negativa entre consumo de UP e o IMC e %GC, porém nas análises de UP/energia e nas análises ajustadas por atividade física e uma variável de controle para a qualidade do relato não mais foram observadas associações com o consumo de UP e as medidas antropométricas de adiposidade. Pode-se concluir que não evidenciamos associação do consumo de UP com medidas antropométricas de obesidade uma vez que o consumo elevado de UP associado ao crescimento do %GC nas análises transversais, não se manteve nas análises longitudinais. A discrepância entre os achados dos estudos seccionais e os longitudinais pode decorrer de confundimento residual nos estudos seccionais. Conclui-se, que para redução do ganho excessivo de peso, orientações relativas exclusivamente a um padrão de alimentação saudável que incorpora a ideia de UP, devem ser acompanhadas de redução da quantidade de alimentos consumidos.

Consumo alimentar e associação com ganho de peso em adolescente: Estudo Longitudinal de Avaliação Nutricional de Adolescentes (ELANA).

Essa tese teve como objetivo avaliar a associação do consumo de padrões alimentares e produtos alimentícios ultraprocessados (UP) sobre indicadores antropométricos e sua variação entre adolescentes. Para tal, foram analisados os dados de 1.031 estudantes de quatro escolas privadas e duas escolas públicas da região metropolitana do Rio de Janeiro que foram acompanhados por três anos consecutivos (2010 a 2012) no Estudo Longitudinal de Avaliação Nutricional de adolescentes (ELANA). Os resultados estão apresentados em três manuscritos que compõem a tese. O primeiro manuscrito identificou três padrões alimentares: Ocidental, composto por massas, embutidos e bacon, carnes, doces, bebidas açucaradas, salgados e fast food, biscoito, pães e cereais, leite e derivados e ovos, o Saudável, caracterizado por peixes, hortaliças, verduras, raízes e feculentos, frutas e sucos e o Arroz/Feijão, composto pelo consumo de arroz, feijão e café. Na análise dos dados na linha de base o padrão Ocidental associou-se a um menor índice de massa corporal (IMC) e não foi observada associação estatisticamente significativa em relação ao percentual de gordura corpórea (%GC) e o padrão em questão. Adicionalmente, foi verificada uma associação negativa entre o padrão Arroz/Feijão e ambos os indicadores antropométricos sugerindo que esse padrão de consumo tradicional possa ser protetor para a obesidade. No segundo manuscrito avaliou-se a relação entre o consumo de UP e indicadores de qualidade da dieta. O consumo de UP foi avaliado em gramas por dia e em gramas/total de calorias. Observou-se um aumento das variáveis marcadoras de alimentação não saudável e saudável com o aumento do consumo de UP. No entanto, quando relacionados ao aumento de consumo de UP/energia observou-se um aumento de marcadores de alimentação não saudável e, com exceção da vitamina C, uma redução de marcadores de alimentação saudável. Assim, a densidade do consumo de UP mostrou-se um bom indicador de qualidade da dieta entre adolescentes. No terceiro manuscrito avaliou-se a associação entre o consumo de UP e a evolução temporal do IMC e %GC. A análise longitudinal por modelos lineares mistos, que levam em conta todas as observações ao longo do tempo, indicou que nas análises não ajustados havia uma associação negativa entre consumo de UP e o IMC e %GC, porém nas análises de UP/energia e nas análises ajustadas por atividade física e uma variável de controle para a qualidade do relato não mais foram observadas associações com o consumo de UP e as medidas antropométricas de adiposidade. Pode-se concluir que não evidenciamos associação do consumo de UP com medidas antropométricas de obesidade uma vez que o consumo elevado de UP associado ao crescimento do %GC nas análises transversais, não se manteve nas análises longitudinais. A discrepância entre os achados dos estudos seccionais e os longitudinais pode decorrer de confundimento residual nos estudos seccionais. Conclui-se, que para redução do ganho excessivo de peso, orientações relativas exclusivamente a um padrão de alimentação saudável que incorpora a ideia de UP, devem ser acompanhadas de redução da quantidade de alimentos consumidos.

Three-dimensional effects on sliding and waving wings

Like large insects, micro air vehicles operate at low Reynolds numbers O(1; 000 - 10; 000) in a regime characterized by separated flow and strong vortices. The leading-edge vortex has been identified as a significant source of high lift on insect wings, but the conditions required for the formation of a stably attached leading-edge vortex are not yet known. The waving wing is designed to model the translational phase of an insect wing stroke by preserving the unsteady starting and stopping motion as well as three-dimensionality in both wing geometry (via a finite-span wing) and kinematics (via wing rotation). The current study examines the effect of the spanwise velocity gradient on the development of the leading-edge vortex along the wing as well as the effects of increasing threedimensionalityby decreasing wing aspect ratio from four to two. Dye flow visualization and particle image velocimetry reveal that the leading-edge vortices that form on a sliding or waving wing have a very high aspect ratio. The structure of the flow is largely two-dimensional on both sliding and waving wings and there is minimal interaction between the leading-edge vortices and the tip vortex. Significant spanwise flow was observed on the waving wing but not on the sliding wing. Despite the increased three-dimensionality on the aspect ratio 2 waving wing, there is no evidence of an attached leading-edge vortex and the structure of the flow is very similar to that on the higher-aspect-ratio wing and sliding wing. © Copyright 2010.

Transmission performance of adaptively modulated optical OFDM modems using subcarrier modulation over SMF IMDD links for access and metropolitan area networks.

Detailed investigations are undertaken, for the first time, of the transmission performance of recently proposed novel Adaptively Modulated Optical OFDM (AMOOFDM) modems using Subcarrier Modulation (AMOOFDM-SCM) in single-channel, SMF-based IMDD links without optical amplification and chromatic dispersion compensation. The cross-talk effect induced by beatings among subcarriers of various types is a crucial factor limiting the maximum achievable AMOOFDM-SCM performance. By applying single sideband modulation and/or spectral gapping to AMOOFDM-SCM, three AMOOFDM-SCM designs of varying complexity are proposed, which achieve >60Gb/s signal transmission over 20 km, 40 km and 60 km. Such performances are >1.5 times higher than those supported by conventional AMOOFDM modems.

Wavelength reused bidirectional transmission of adaptively modulated optical OFDM signals in WDM-PONs incorporating SOA and RSOA intensity modulators.

Detailed numerical investigations are undertaken of wavelength reused bidirectional transmission of adaptively modulated optical OFDM (AMOOFDM) signals over a single SMF in a colorless WDM-PON incorporating a semiconductor optical amplifier (SOA) intensity modulator and a reflective SOA (RSOA) intensity modulator in the optical line termination and optical network unit, respectively. A comprehensive theoretical model describing the performance of such network scenarios is, for the first time, developed, taking into account dynamic optical characteristics of SOA and RSOA intensity modulators as well as the effects of Rayleigh backscattering (RB) and residual downstream signal-induced crosstalk. The developed model is rigorously verified experimentally in RSOA-based real-time end-to-end OOFDM systems at 7.5 Gb/s. It is shown that the RB noise and crosstalk effects are dominant factors limiting the maximum achievable downstream and upstream transmission performance. Under optimum SOA and RSOA operating conditions as well as practical downstream and upstream optical launch powers, 10 Gb/s downstream and 6 Gb/s upstream over 40 km SMF transmissions of conventional double sideband AMOOFDM signals are feasible without utilizing in-line optical amplification and chromatic dispersion compensation. In particular, the aforementioned transmission performance can be improved to 23 Gb/s downstream and 8 Gb/s upstream over 40 km SMFs when single sideband subcarrier modulation is adopted in the downstream systems.

Achieving robust face recognition from video by combining a weak photometric model and a learnt generic face invariant

In spite of over two decades of intense research, illumination and pose invariance remain prohibitively challenging aspects of face recognition for most practical applications. The objective of this work is to recognize faces using video sequences both for training and recognition input, in a realistic, unconstrained setup in which lighting, pose and user motion pattern have a wide variability and face images are of low resolution. The central contribution is an illumination invariant, which we show to be suitable for recognition from video of loosely constrained head motion. In particular there are three contributions: (i) we show how a photometric model of image formation can be combined with a statistical model of generic face appearance variation to exploit the proposed invariant and generalize in the presence of extreme illumination changes; (ii) we introduce a video sequence re-illumination algorithm to achieve fine alignment of two video sequences; and (iii) we use the smoothness of geodesically local appearance manifold structure and a robust same-identity likelihood to achieve robustness to unseen head poses. We describe a fully automatic recognition system based on the proposed method and an extensive evaluation on 323 individuals and 1474 video sequences with extreme illumination, pose and head motion variation. Our system consistently achieved a nearly perfect recognition rate (over 99.7% on all four databases). © 2012 Elsevier Ltd All rights reserved.

Ultrasonic imaging of 3D displacement vectors using a simulated 2D array and beamsteering.

Most quasi-static ultrasound elastography methods image only the axial strain, derived from displacements measured in the direction of ultrasound propagation. In other directions, the beam lacks high resolution phase information and displacement estimation is therefore less precise. However, these estimates can be improved by steering the ultrasound beam through multiple angles and combining displacements measured along the different beam directions. Previously, beamsteering has only considered the 2D case to improve the lateral displacement estimates. In this paper, we extend this to 3D using a simulated 2D array to steer both laterally and elevationally in order to estimate the full 3D displacement vector over a volume. The method is tested on simulated and phantom data using a simulated 6-10MHz array, and the precision of displacement estimation is measured with and without beamsteering. In simulations, we found a statistically significant improvement in the precision of lateral and elevational displacement estimates: lateral precision 35.69μm unsteered, 3.70μm steered; elevational precision 38.67μm unsteered, 3.64μm steered. Similar results were found in the phantom data: lateral precision 26.51μm unsteered, 5.78μm steered; elevational precision 28.92μm unsteered, 11.87μm steered. We conclude that volumetric 3D beamsteering improves the precision of lateral and elevational displacement estimates.

Ultrasonic imaging of 3D displacement vectors using a simulated 2D array and beamsteering

Most quasi-static ultrasound elastography methods image only the axial strain, derived from displacements measured in the direction of ultrasound propagation. In other directions, the beam lacks high resolution phase information and displacement estimation is therefore less precise. However, these estimates can be improved by steering the ultrasound beam through multiple angles and combining displacements measured along the different beam directions. Previously, beamsteering has only considered the 2D case to improve the lateral displacement estimates. In this paper, we extend this to 3D using a simulated 2D array to steer both laterally and elevationally in order to estimate the full 3D displacement vector over a volume. The method is tested on simulated and phantom data using a simulated 6-10 MHz array, and the precision of displacement estimation is measured with and without beamsteering. In simulations, we found a statistically significant improvement in the precision of lateral and elevational displacement estimates: lateral precision 35.69 μm unsteered, 3.70 μm steered; elevational precision 38.67 μm unsteered, 3.64 μm steered. Similar results were found in the phantom data: lateral precision 26.51 μm unsteered, 5.78 μm steered; elevational precision 28.92 μm unsteered, 11.87 μm steered. We conclude that volumetric 3D beamsteering improves the precision of lateral and elevational displacement estimates. © 2012 Elsevier B.V. All rights reserved.

Comparative studies on photosynthesis and phosphate metabolism of Cylindrospermopsis raciborskii with Microcystis aeruginosa and Aphanizomenon flos-aquae

The physiological differences for three bloom-forming cyanobacteria (Cylindrospermopsis raciborskii, Microcystis aeruginosa, and Aphanizomenon flos-aquae) were investigated. In comparison with M. aeruginosa and A. flos-aquae, C. raciborskii exhibited a significantly higher concentration of carotenoids, higher values in maximum photosynthesis rate (P-m), apparent photosynthetic efficieny (a), and maximum electron transport rate (ETRmax) during the growth period. In addition, higher extracellular alkaline phosphatase activities and lower light compensation point (I-c) were also detected in C raciborskii (p < 0.05, ANOVA). Therefore, it is suggested that the higher photosynthetic activities, more effective uptake and utilization to phosphate, and low light requirements might play important roles in the occurrence and invasive behavior of C. raciborskii. Crown Copyright (C) 2009 Published by Elsevier B.V. All rights reserved.

Scanning electron microscopy of Aspidogaster ijimai Kawamura, 1913 and A-conchicola Baer, 1827 (Aspidogastrea, Aspidogastridae) with reference to their fish definitive-host specificity

Two species of aspidogastreans, namely Aspidogaster ijimai and A. conchicola, were studied by scanning electron microscopy. In nine lakes and an old river course, the Tian'ezhou oxbow, investigated in the flood plain of the Yangtze River, A. ijimai was obtained from the common carp (Cyprinus carpio) in three lakes, and A. conchicola from the black carp Mylopharyngodon piceus in three lakes and the oxbow. In none of the localities, however, were the two species found together. It is suggested that A. ijimai may be considered as a specialist parasite for the common carp, at least in the flood-plain lakes of the Yangtze River. The two parasites were similar in many aspects of their morphology. Their bodies can both be separated into a dorsal part and a ventral disc, with the body surface of the dorsal part elevated by transverse folds, and the disc subdivided into alveoli by transverse and longitudinal septa, although the number of alveoli was different in the two species. The depression on the ventral surface of the neck region was prominent for both species, and their ventral disc was covered densely with non-ciliated bulbous papillae. The position of mouth, osmo-regulatory pore and marginal organ was also similar for A. ijimai and A. conchicola. However, microridges in the trough of the folds in the neck region and numerous small pits on the upper part of the septa were found exclusively in A. ijimai, but uniciliated sensory papillae in A. conchicola.

Influence of deep level defects on electrical compensation in semi-insulating InP materials

In this paper, we analyze and compare electrical compensation and deep level defects in semi-insulating ( SI) materials prepared by Fe-doping and high temperature annealing of undoped InP. Influence of deep level defects in the SI-InP materials on the electrical compensation has been studied thermally stimulated current spectroscopy (TSC). Electrical property of the Fe-doped SI-InP is deteriorated due to involvement of a high concentration of deep level defects in the compensation. In contrast, the concentration of deep defects is very low in high temperature annealed undoped SI-InP in which Fe acceptors formed by diffusion act as the only compensation centre to pin the Fermi level, resulting in excellent electrical performance. A more comprehensive electrical compensation model of SI-InP has been given based on the research results.

Comparative study on the broadening of exciton luminescence linewidth due to phonon in zinc-blende and wurtzite GaN epilayers

Linewidth broadening of exciton luminescence in wurtzite and zinc-blende GaN epilayers was investigated as a function of temperature with photoluminescence. A widely accepted theoretical model was used to fit the experimental data, so that the coupling parameters between exciton and acoustic and longitudinal optical phonons were obtained for both structures. It was found that the coupling constants of both exciton-acoustic optical phonon coupling and exciton-longitudinal optical phonon coupling for zinc-blende GaN are almost twice as much as the corresponding values of wurtzite GaN. These results show that the relatively strong exciton-phonon scattering seems to be characteristic to zinc-blende GaN film. (C) 2002 American Institute of Physics.

The exciton-longitudinal-optical-phonon coupling in InGaN/GaN single quantum wells with various cap layer thicknesses

This paper studies the exciton-longitudinal-optical-phonon coupling in InGaN/GaN single quantum wells with various cap layer thicknesses by low temperature photoluminescence (PL) measurements With increasing cap layer thickness, the PL peak energy shifts to lower energy and the coupling strength between the exciton and longitudinal-optical (LO) phonon, described by Huang-Rhys factor, increases remarkably due to an enhancement of the internal electric field With increasing excitation intensity, the zero-phonon peak shows a blueshift and the Huang-Rhys factor decreases These results reveal that there is a large built-in electric field in the well layer and the exciton-LO phonon coupling is strongly affected by the thickness of the cap layer

Structural ordering and interface morphology in symmetrically strained (GaIn)As/Ga(PAs) superlattices grown on off-oriented GaAs(100)

In this work we investigate the structural properties of symmetrically strained (GaIn)As/GaAs/Ga(PAs)/GaAs superlattices by means of x-ray diffraction, reciprocal-space mapping, and x-ray reflectivity. The multilayers were grown by metalorganic vapor-phase epitaxy on (001) GaAs substrates intentionally off-oriented towards one of the nearest [110] directions. High-resolution triple-crystal reciprocal-space maps recorded for different azimuth angles in the vicinity of the (004) Bragg diffraction clearly show a double periodicity of the x-ray peak intensity that can be ascribed to a lateral and a vertical periodicity occurring parallel and perpendicular to the growth surface. Moreover, from the intensity modulation of the satellite peaks, a lateral-strain gradient within the epilayer unit cell is found, varying from a tensile to a compressive strain. Thus, the substrate off-orientation promotes a lateral modulation of the layer thickness (ordered interface roughness) and of the lattice strain, giving rise to laterally ordered macrosteps. In this respect, contour maps of the specular reflected beam in the vicinity of the (000) reciprocal lattice point were recorded in order to inspect the vertical and lateral interface roughness correlation, A semiquantitative analysis of our results shows that the interface morphology and roughness is greatly influenced by the off-orientation angle and the lateral strain distribution. Two mean spatial wavelengths can be determined, one corresponding exactly to the macrostep periodicity and the other indicating a further interface waviness along the macrosteps. The same spatial periodicities were found on the surface by atomic-force-microscopy images confirming the x-ray results and revealing a strong vertical correlation of the interfaces up to the outer surface.

Isothermal and non-isothermal crystallization kinetics of syndiotactic polypropelene

Isothermal and non-isothermal crystallization kinetics of a syndiotactic polypropylene(sPP) sample synthesized by new metallocene catalyst at different annealing temperatures and different cooling rates have been investigated by using differential scanning calorimetry(DSC) and density analysis. The equilibrium melting temperature( T-m(0)) is 158 degrees C by Hoffman-Weeks method. The equilibrium heat of fusion(Delta H-m(0)) is 88J/g in terms of the density analysis and DSC methods. The lateral and end surface free energies derived from the Lauritzen-Hoffman spherulitic growth rate equation are sigma = 5.2erg/cm(2) and sigma(e) = 69erg/cm(2), respectively. The work of chain folding is determined to be q = 33.75kJ/mol. Modified Avrami equation and Ozawa equation can be used to describe the non-isothermal crystallization behavior. And a new and convenient approach by combining the Avrami equation and Ozawa equation in a same crystallinity is used to describe the non-isothermal behavior as well. The crystallization activation energies are evaluated to be 73.7kJ/mol and 73.1kJ/mol for isothermal crystallization and non-isothermal crystallization, respectively. The Avrami exponent n is 1.5 similar to 1.6 for isothermal crystallization procedure, while the Avrami exponent n,is 2.5 similar to 3.5 for non-isothermal crystallization procedure. This indicated the difference of nucleation and growth between the two procedures.