A method to incorporate the effect of taxonomic uncertainty on multivariate analyses of ecological data

Researchers in ecology commonly use multivariate analyses (e.g. redundancy analysis, canonical correspondence analysis, Mantel correlation, multivariate analysis of variance) to interpret patterns in biological data and relate these patterns to environmental predictors. There has been, however, little recognition of the errors associated with biological data and the influence that these may have on predictions derived from ecological hypotheses. We present a permutational method that assesses the effects of taxonomic uncertainty on the multivariate analyses typically used in the analysis of ecological data. The procedure is based on iterative randomizations that randomly re-assign non identified species in each site to any of the other species found in the remaining sites. After each re-assignment of species identities, the multivariate method at stake is run and a parameter of interest is calculated. Consequently, one can estimate a range of plausible values for the parameter of interest under different scenarios of re-assigned species identities. We demonstrate the use of our approach in the calculation of two parameters with an example involving tropical tree species from western Amazonia: 1) the Mantel correlation between compositional similarity and environmental distances between pairs of sites, and; 2) the variance explained by environmental predictors in redundancy analysis (RDA). We also investigated the effects of increasing taxonomic uncertainty (i.e. number of unidentified species), and the taxonomic resolution at which morphospecies are determined (genus-resolution, family-resolution, or fully undetermined species) on the uncertainty range of these parameters. To achieve this, we performed simulations on a tree dataset from southern Mexico by randomly selecting a portion of the species contained in the dataset and classifying them as unidentified at each level of decreasing taxonomic resolution. An analysis of covariance showed that both taxonomic uncertainty and resolution significantly influence the uncertainty range of the resulting parameters. Increasing taxonomic uncertainty expands our uncertainty of the parameters estimated both in the Mantel test and RDA. The effects of increasing taxonomic resolution, however, are not as evident. The method presented in this study improves the traditional approaches to study compositional change in ecological communities by accounting for some of the uncertainty inherent to biological data. We hope that this approach can be routinely used to estimate any parameter of interest obtained from compositional data tables when faced with taxonomic uncertainty.

Key quality factors and travellers profiles at interurban interchanges

La planificación y las políticas de transporte no pueden descuidar la calidad del servicio, considerando que influye notablemente en el cambio modal del coche hacia otros medios de transporte más sostenibles. El concepto se aplica también a los intercambiadores de transporte público, los nodos del sistema donde se cruzan las distintas redes del transporte público y privado. Aunque se han logrado numerosos avances para medir y evaluar la calidad en el sector del transporte público, se han dedicado relativamente pocos esfuerzos a investigar estos aspectos relacionados con la calidad de los intercambiadores del transporte público. Este trabajo de investigación se concentra en la calidad del servicio de la transferencia modal en los intercambiadores interurbanos, según la perspectiva de los viajeros. Su objetivo es identificar los factores clave de la calidad del servicio y los perfiles de los viajeros en los intercambiadores. La investigación es exploratoria y ofrece información acerca de la percepción de los viajeros intermodales relacionada con los aspectos de la calidad, aportando nuevos elementos y datos para adentrarse en estudios más detallados. La metodología del trabajo combina técnicas de análisis estadístico multivariante para analizar los datos de las encuestas sobre la satisfacción de los clientes y se subdivide en tres etapas. En primer lugar, se ha implementado el análisis de correspondencias múltiples para explorar los constructos latentes relacionados con la satisfacción de las características cualitativas de los intercambiadores interurbanos, identificando así los factores clave de la calidad. En segundo lugar, se ha aplicado un análisis de conglomerados de k-medias sobre los factores clave de calidad para clasificar a los viajeros en grupos de usuarios de transportes homogéneos, de acuerdo con su percepción de satisfacción, identificando de este modo los perfiles de los viajeros. Por último, se han formulado sugerencias y recomendaciones sobre la calidad para respaldar la formulación de políticas, estableciendo las prioridades para los intercambiadores interurbanos. La metodología se aplicó en cuatro intercambiadores interurbanos (estaciones de ferrocarriles o de autobuses ) en Madrid, Zaragoza, Gothenburg y Lion, analizando los datos recogidos mediante una encuesta de satisfacción del cliente llevada a cabo en 2011 en los cuatro casos de estudio, donde se interconectan distintos medios de transporte público y privado, de corta y larga distancia. Se recogieron datos sobre la satisfacción de los viajeros con 26 criterios de calidad, así como información sobre aspectos socio-económicos y pautas de comportamiento de viajes. Mediante el análisis de correspondencias múltiples se identificaron 4-5 factores clave de calidad en cada intercambiador, que se asocian principalmente con el sistema de emisión de billetes, el confort y la interconexión, mientras que los viajeros no perciben los temas clásicos como la información. Mediante el análisis de conglomerados se identificaron 2-5 perfiles de viajeros en cada intercambiador. Se reconocieron dos grupos de viajeros en casi todos los casos de estudio: viajeros de cercanía/trabajadores y turistas. Por lo que concierne a las prioridades para apoyar a las partes interesadas en la formulación de políticas, la expedición de billetes es el factor clave para los intercambiadores interurbanos españoles, mientras que la interconexión y los aspectos temporales se destacan en los intercambiadores de Francia y Suecia. Quality of Service can not be neglected in public transport planning and policy making, since it strongly influences modal shifts from car to more sustainable modes. This concept is also related to Public Transport interchanges, the nodes of the transport system where the different sub-systems of public passenger transport and personal vehicles meet. Although a lot of progress has been generally done to measure and assess quality in public transport sector, relatively little investigation has been conducted on quality at PT interchanges. This research work focusses on Quality of Service in the use of transfer facilities at interurban interchanges, according to current travellers’ perspective. It aims at identifying key quality factors and travellers profiles at interurban interchanges. The research is exploratory and offers insight into intermodal travellers’ perception on quality aspects, providing new elements and inputs for more definitive investigation. The methodology of the work combines multivariate statistical techniques to analyse data from customer satisfaction surveys and is subdivided in three steps. Firstly, multiple correspondence analysis was performed to explore latent constructs as concern satisfaction of quality attributes at interurban interchanges, thus identifying the so-called Key Quality Factor. Secondly, k-means cluster analysis was implemented on the key quality factors to classify travellers in homogeneous groups of transport users, according to their perception of satisfaction, thus identifying the so-called Travellers Profiles. Finally, hints and recommendations on quality were identified to support policy making, setting priorities for interurban interchanges. The methodology was applied at four interurban interchanges in Madrid, Zaragoza, Gothenburg and Lyon, analysing the data collected through a customer satisfaction survey carried out in 2011 at the four railway or bus stations where different modes of public and private transport are interconnected covering both short and long trips. Data on travellers’ satisfaction with 26 quality attributes were collected, as well as information on socio-economical and travel patterns. Through multiple correspondence analysis were identified 4-5 key quality factors per interchange. They are mainly related to ticketing, comfort and connectivity, while classical issues, as information, are not perceived as important by travellers’. Through cluster analysis were identified 2-5 travellers profiles per interchange. Two groups of travellers can be found in almost all case studies: commuter / business travellers and holiday travellers. As regards the priorities to support stakeholders in policy making, ticketing is the key-issue for the Spanish interurban interchanges, while connectivity and temporal issues emerge in the French and Swedish case studies.

Key quality factors at urban interchanges.

Quality of service should not be overlooked in public transport planning and policy making, as it influences modal shift from car use to more sustainable means. Little research has been conducted on the quality of public transport interchanges from the perspective of current travellers (i.e. perceived quality). This work is thus aimed at identifying key quality factors in urban interchanges, through an exploratory approach (multiple correspondence analysis) that provides novel elements for further research. The methodology was applied at interchanges in Madrid and Gothenburg and the data used in the analysis were collected through customer satisfaction surveys conducted in 2011. The analysis identified five key quality factors per interchange. Ticketing plays a key role at both interchanges while physical and environmental issues emerged at Avenida de America in Madrid, and services, temporal issues and interconnectivity characterise Gothenburg central station. Compared with other quality aspects, classical issues such as safety/security and information are not perceived as important by intermodal travellers.

Modelo explicativo de la relación entre productividad y valores organizacionales, en la PYME del sector metalúrgico y minero de Venezuela

Como consecuencia de los procesos de globalización el mundo empresarial está sometido a constantes cambios que han originado la necesidad en las empresas de evaluar su funcionamiento, con el objeto de adecuar su gestión a las mejores prácticas gerenciales y operativas, en función de adaptarse a las exigencias presentes en los escenarios en que están inmersas. La presente investigación tiene como propósito desarrollar un modelo explicativo de la relación entre la productividad y los valores organizacionales, teniendo como premisa los distintos planteamientos o teorías que destacan la importancia que tienen los valores organizacionales para que las empresas logren sus metas. Específicamente se tomó como referencia la clasificación de los valores organizacionales, que contempla el modelo de gestión de Dirección por Valores (DPV), de García y Dolan (2001). Las PYMES, al considerar el efecto que tienen los valores organizacionales en la productividad, pueden apoyar su gestión a través del compromiso de las personas para lograr los resultados de productividad que quieren o necesitan alcanzar. El abordaje del estudio se ha basado en la investigación explicativa, a través de la cual se exponen las razones de ocurrencia de un fenómeno o se muestran los mecanismos por los que se relacionan dos o más variables, lo que permitió conjugar definiciones y supuestos de las relaciones encontradas entre los valores organizacionales identificados de acuerdo a la opinión de los entrevistados y que resultaron ser significativos con los resultados de productividad que presentan las empresas que fueron objeto de esta investigación La población estuvo conformada por 40 empresas activas del sector metalúrgico y minero de Ciudad Guayana, Estado Bolívar, Venezuela, pertenecientes a la Asociación de Industriales Metalúrgicos y de Minería de la región Guayana (AIMM) y al directorio de la Cámara de Industriales y Mineros de Guayana. La muestra estudiada corresponde a 25 empresas que representan el 62% de la población. El proceso que se siguió para generar el modelo explicativo contempla tres etapas. La primera consiste en la fase descriptiva donde se recogió la información referente a la productividad de las empresas y a la determinación de los valores organizacionales identificados a través del análisis cualitativo de las entrevistas que se realizaron a los informantes de las empresas de la muestra. Para ello se utilizó el software Atlas ti 6.0. La segunda etapa, denominada comparativa, consistió en determinar la relación entre la productividad y los valores organizacionales, a través de las tablas de contingencias, de acuerdo con el grado de significancia que mostró el estadístico Chi- cuadrado. La tercera y última etapa del proceso es la fase explicativa que consistió en estimar la magnitud de la relación entre las variables productividad y valores organizacionales utilizando el coeficiente de contingencia de Pearson, y en establecer las asociaciones de acuerdo a las proximidades observadas que resultaron del análisis de correspondencias múltiples. Entre los hallazgos del estudio desarrollado se encontró que la productividad de las empresas puede fijarse en tres categorías: alta, media y baja y entre los factores que afectan a la productividad destacan, en el contexto externo: el gobierno, los clientes y los proveedores y en el contexto interno: la mano de obra, los materiales y los suministros. Según la opinión de los gerentes entrevistados, los valores organizacionales que caracterizan a las empresas del sector estudiado se agrupan en veintisiete categorías, que se clasifican en los siguientes componentes: entorno mercado, clientes, proveedores y otras empresas aliadas, medio ambiente, forma de tratar la Dirección al resto de empleados, forma de trabajar cotidiana y gestión de los recursos económicos. Los valores organizacionales que resultaron ser significativos fueron la innovación, la honestidad y el orden y limpieza. La magnitud de la relación encontrada del valor innovación fue moderadamente fuerte. Se infiere que las empresas, al tener una Productividad baja, deciden innovar en el desarrollo de nuevos productos. El valor honestidad arrojó una relación moderadamente fuerte, determinando que las empresas de Productividad alta basan sus relaciones con los proveedores en la honestidad. Finalmente, el valor orden y limpieza muestra una relación moderadamente débil, lo que hace suponer que las empresas de Productividad media tienen alguna preferencia por mantener el orden y limpieza en las áreas de trabajo. El modelo explicativo de la relación entre productividad y valores organizacionales, en las PYMES del sector metalúrgico y minero de Ciudad Guayana, quedó conformado por los siguientes componentes: mercado, clientes, proveedores y otras empresas aliadas, y medio ambiente. No se encontraron relaciones en los componentes forma de tratar la Dirección al resto de empleados, forma de trabajar cotidiana y gestión de los recursos económicos. ABSTRACT As a result of globalization processes, the business world is subject to constant change. This has resulted in the need for companies to evaluate their performance in order to adjust their processes to the best managerial and operational practices, with the goal to adapt to the demands present in the scenarios in which they are embedded. This research aimed to develop an explanatory model of the relationship between productivity and organizational values. In addition, it was based on the different approaches or theories that relate the importance for enterprises of the organizational values to achieve their goals. Specifically, reference was made to the classification of organizational values, which includes the model of Management by Values (DPV) following García and Dolan (1997). The SMEs, considering the effect of organizational values on productivity, can support their management through the commitment of their people to achieve productivity results that they want or need to accomplish. The study approach was based on explanatory research, which presents the reasons for occurrence of a phenomenon and the mechanisms through which two or more variables are related. This allowed to combine definitions and assumptions about the relationship found between organizational values and the productivity results of the companies that took part in this research. Organizational values were identified in the opinion of the managers interviewed, and were found to be significant with the productivity results. The population consisted of 40 active enterprises of the metallurgical and mining industry of Ciudad Guayana, Estado Bolivar, Venezuela. These enterprises were members of the Association of Metallurgical and Mining Industry of the Guayana Region (AIMM, by its acronym in Spanish) and the Directory of the Chamber of Industrial and Mining of Guayana. The sample of the study is comprised of 25 enterprises, which represent 62% of the total population. The process which has been followed to generate the explanatory model involves three stages. The first stage is the descriptive phase where the information about enterprises productivity and the determination of organizational values is gathered. These organizational values were identified by a qualitative analysis of the interviews conducted with managers of each enterprise. This analysis was performed using the Atlas ti 6.0 software. The second stage, denominated comparative, consisted in determining the relationship between productivity and organizational values through contingency tables, and according to the degree of significance showed by the Chi-Square, statistic. The third, and final stage of the process, is the explanatory phase. This consisted in estimating the magnitude of the relationship between productivity and organizational values variables using the Pearson's contingency coefficient. In addition, this stage comprises the establishment of the associations according to the observed proximities that resulted from the multiple correspondence analysis. Among the findings of this study, it was found that the productivity of enterprises can be set in three categories: high, medium and low. Additionally, it was found that in the external context the factors that stand out affecting productivity are: government policy, customers and suppliers, while in the domestic context they are: labor, materials and supplies. According to the opinion of the managers interviewed the organizational values that characterize the companies that were studied are grouped into twenty seven categories. These categories are classified into the following components: market environment, customers, suppliers and other allied companies, the environment, how Management deals with of the employees, way to work every day, and management of economic resources. Organizational values that were found to be significant were innovation, honesty and order and cleanliness. The magnitude of the relation of the innovation value was found to be moderately strong. It is inferred that companies that have low productivity decide to innovate in the development of new products. The honesty value showed a moderately strong relation, determining that high productivity enterprises base their relationships with suppliers on honesty. Lastly, the order and cleanliness value showed a moderately weak relation, which suggests that average productivity enterprises have a preference to maintain order and cleanliness in the work areas. The explanatory model of the relationship between productivity and organizational values, in the SMEs of the metallurgical and mining sector of Ciudad Guayana, was composed of the following components: market, customers, suppliers and other allied companies, and the environment. No relationships were found in the following components: how Management deals with employees, way to work every day, and management of economic resources.

Culture as shared cognitive representations.

Culture consists of shared cognitive representations in the minds of individuals. This paper investigates the extent to which English speakers share the "same" semantic structure of English kinship terms. The semantic structure is defined as the arrangement of the terms relative to each other as represented in a metric space in which items judged more similar are placed closer to each other than items judged as less similar. The cognitive representation of the semantic structure, residing in the mind of an individual, is measured by judged similarity tasks involving comparisons among terms. Using six independent measurements, from each of 122 individuals, correspondence analysis represents the data in a common multidimensional spatial representation. Judged by a variety of statistical procedures, the individuals in our sample share virtually identical cognitive representations of the semantic structure of kinship terms. This model of culture accounts for 70-90% of the total variability in these data. We argue that our findings on kinship should generalize to all semantic domains--e.g., animals, emotions, etc. The investigation of semantic domains is important because they may reside in localized functional units in the brain, because they relate to a variety of cognitive processes, and because they have the potential to provide methods for diagnosing individual breakdowns in the structure of cognitive representations typical of such ailments as Alzheimer disease.

Influence of characteristics of irrigation channels on the breeding bird community of a wetland zone in southeast of Spain

The “El Hondo Nature Park” is mainly composed of a series of irrigation channels and water reservoirs, subjected to various regimes of management as well as reed and vegetation control, thus creating a great variety of habitats and situations. To determine the influence of these habitats and management regimes on the local bird community, a set of characteristics of these channels and their surrounding area were analysed with a Correspondence Analysis (CA). The degree of reed development in channels and the presence in the surroundings of orchards and other reed formations were the most decisive factors to explain the probability of occurrence of reed birds and waterbirds, as well as bird species richness and abundance. Other bird species were not directly influenced by channel variables, but only by those of surrounding land uses.

Conocimientos científicos importantes para la conservación y gestión de las tres especies de liebre de la Península Ibérica: deficiencias y retos para el futuro

Los principales avances en el conocimiento de las tres especies de liebre presentes en la Península Ibérica (dos de ellas endémicas) tuvieron lugar a finales del siglo XX con la realización de estudios sobre genética, morfología y ecología descriptiva. Durante los años 90 y 2000, se ha profundizado fundamentalmente en aspectos genéticos y evolutivos, en la definición de factores ambientales determinantes de su distribución, en el estado sanitario y en el comportamiento espacial. En lo que respecta a los estudios sobre dinámica poblacional, se dispone únicamente de trabajos locales con metodologías diversas y series de datos generalmente cortas, lo que impide realizar una interpretación conjunta y sólida de los datos. Esta falta de información conlleva que las bases técnicas para determinar un adecuado aprovechamiento cinegético sean en la mayoría de los casos insuficientes. Además, las tres especies se encuentran fuertemente ligadas al medio agrícola y ganadero, por lo que determinar los factores relativos al manejo de estos medios que afectan a las liebres resulta esencial, especialmente debido al declive general de la mayor parte de las especies silvestres ligadas a estos espacios. ¿Será el sector científico-técnico capaz de avanzar en el conocimiento de la dinámica poblacional y el efecto del manejo agroganadero para una mejor gestión de las liebres ibéricas?

El "Análisis de Correspondencias Múltiples" como herramienta metodológica de síntesis teórica y empírica : Su aporte al estudio del locus universitario privado argentino (1955-1983)

El Análisis de Correspondencias Múltiples (ACM), recurso metodológico utilizado por Bourdieu y su equipo en un nivel avanzado de síntesis teórico-empírica, constituye una herramienta fundamental para la construcción analítica de espacios relacionales. Permite posicionar relacionalmente unidades de análisis en función de un conjunto determinado de variables y plasmar la multiplicidad resultante tanto gráfica como analíticamente. Comenzando por una reflexión general sobre las potencialidades de la herramienta, este artículo analiza la configuración del espacio universitario privado en Argentina (1955-1983) a partir del ACM, que permitió determinar las relaciones de homología y principios de diferenciación existentes entre las instituciones que lo componen.

Benthic foraminiferal number of specimens in Cretaceous samples of various DSDP and ODP Sites (Table 2)

Benthic foraminifera from 24 DSDP/ODP sites were investigated to assess their global horizontal and vertical distribution in the deep-sea environment at the end of the Cretaceous period. The samples analyzed are from the late Maastrichtian and within the planktic foraminiferal Abathomphus mayaroensis Zone from a wide range of oceans and paleolatitudes, including the low-latitude Sites 10 and 384 (Atlantic Ocean), 47, 171, 305, and 465 (Pacific Ocean), the mid-latitude Sites 20, 111, 356, 363, 516, 525, 527, 548, and 605 (Atlantic Ocean), 216, 217, and 758 (Indian Ocean), and the high-latitude Sites 208 (Pacific Ocean), 689,698,700,738 and 750 (Southern Ocean). Correspondence analysis, based on the 75 most common taxa, shows a clear biogeographic trend along the first correspondence axis by arranging the sites in paleolatitudinal order. The assemblages from the Tethyan Realm (i.e., low latitudes) are marked by abundant heavily calcified buliminids (such as Bulimina incisa, B. trinitatensis, B. velascoensis, and Reussella szajnochae) and Aragonia spp., whereas high-latitude faunas are characterized by abundant Alabamina creta, Gyroidinoides quadratus, and Pullenia coryelli. The results indicate that the faunas at low and high latitudes, respectively, were influenced by quite different environmental conditions. This is based on the much higher abundance of infaunal morphotypes at low and mid latitudes compared to high latitudes, suggesting that the biogeographic trend found in the data set coincides with the trophic regime at the various sites. The results also provide support for the hypothesis that postulates two simultaneous sources and mechanisms for deep-water formation during the Late Cretaceous, including warm, saline deep water produced by evaporation at low (equatorial) latitudes in contrast to the formation of cold deep waters at high (southern) latitudes.

Benthic foraminifera in the Arctic Ocean

We examine the quantitative composition of benthic foraminiferal assemblages of Rose Bengal-stained surface samples from 37 stations in the Laptev Sea, and combine this data set with an existing data set along a transect from Spitsbergen to the central Arctic Ocean. Foraminiferal test accumulation rates, diversity, faunal composition and statistically defined foraminiferal associations are analysed for living (Rose Bengal-stained) and dead foraminifers. We compare the results of several benthic foraminiferal diversity indices and statistically defined foraminiferal associations, including Fisher's alpha and Shannon-Wiener diversity indices, Q-mode principal component analysis and correspondence analysis. Diversity and faunal density (standing stock) of living benthic foraminifers are positively correlated to trophic resources. In contrast, the accumulation rate of dead foraminifers (BFAR) shows fluctuating values depending on test disintegration processes. Foraminiferal associations defined by Q-mode principal component analysis and correspondence analysis are comparable. The factor values of the correspondence analysis allow a quantitative correlation between the foraminiferal fauna and the local carbon flux, which may be used as a tool to estimate changes in primary productivity.

Calcareous dinoflagellates in the eastern equatorial Atlantic

Sediments of the Equatorial Atlantic (core GeoB 1105-4) have been investigated for both calcareous dinoflagellates and organic-walled dinoflagellate cysts. In order to determine the ecological affinity of calcareous dinoflagellates the statistical methods of Detrended Correspondence Analysis (DCA) and Redundancy Analysis (RDA) were used. Utilising DCA, distribution patterns of calcareous dinoflagellates have been compared with those of the ecologically much better known organic-walled dinoflagellate cysts. This method was also used to determine which environmental gradients have a major influence on the species composition. By using existing environmental information based on benthic and planktic foraminifera, such as Sea Surface Temperature (SST) and stable oxygen and carbon isotopes, as well as information on the amount of Calcium Carbonate and Total Organic Carbon (TOC) in bottom sediments, these gradients could be interpreted in terms of productivity and glacial-interglacial trends. Using RDA, the direct relationships between the distribution patterns of calcareous dinoflagellates with the above mentioned external variables could be determined. For the studied region and time interval (141-6.7 ka) the calcareous dinoflagellates show enhanced abundances in periods with reduced productivity most probably related to decreased divergence and relatively stratified, oligotrophic oceanic conditions.

Geographic distribution of dinoflagellate cysts in surface sediments

Dinoflagellate cysts are useful for reconstructing upper water conditions. For adequate reconstructions detailed information is required about the relationship between modern day environmental conditions and the geographic distribution of cysts in sediments. This Atlas summarises the modern global distribution of 71 organicwalled dinoflagellate cyst species. The synthesis is based on the integration of literature sources together with data of 2405 globally distributed surface sediment samples that have been preparedwith a comparable methodology and taxonomy. The distribution patterns of individual cyst species are being comparedwith environmental factors that are knownto influence dinoflagellate growth, gamete production, encystment, excystment and preservation of their organic-walled cysts: surface water temperature, salinity, nitrate, phosphate, chlorophyll-a concentrations and bottom water oxygen concentrations. Graphs are provided for every species depicting the relationship between seasonal and annual variations of these parameters and the relative abundance of the species. Results have been compared with previously published records; an overview of the ecological significance as well as information about the seasonal production of each individual species is presented. The relationship between the cyst distribution and variation in the aforementioned environmental parameters was analysed by performing a canonical correspondence analysis. All tested variables showed a positive relationship on the 99% confidence level. Sea-surface temperature represents the parameter corresponding to the largest amount of variance within the dataset (40%) followed by nitrate, salinity, phosphate and bottom-water oxygen concentration, which correspond to 34%, 33%, 25% and 24% of the variance, respectively. Characterisations of selected environments as well as a discussion about how these factors could have influenced the final cyst yield in sediments are included.

(Table 2) Dinoflagellate cysts in surface sediment samples of METEOR cruises M20/2, M23/1, M34/2 and M34/2

The organic walled cyst content of 41 surface sediment samples from the south-eastern South Atlantic Ocean have been studied to create a dataset that can be used for palaeoceanographic reconstructions. In order to obtain insight into which environmental factors influence the distribution of individual cyst species, the cyst associations have been compared with oceanographic characteristics of the overlying water masses, i.e. temperature, salinity, density and stratification gradients. The associations and relationships have been established by visual examination of the dataset and the multivariate ordination techniques, Detrended Correspondence Analysis and Canonical Correspondence Analysis. Special attention has been given to the factors of transport and preservation of the cysts. Five associations have been recognised as being characteristic of (1) areas influenced by coastal upwelling and/or river outflow, (2) open ocean, (3) Agulhas Current and southern Benguela Current, (4) Benguela Current and (5) Walvis Bay, shelf break area. The factors dominant in influencing either directly or indirectly the cyst distributions appear to be the stratification in the upper 50 m of the water column, nutrient concentration and seasonality. Variations in sea surface temperatures and salinities have only minor effect on cyst distribution.

Genetic diversity revealed in the apomictic fruit species Garcinia mangostana L. (mangosteen)

The novel molecular marker technique Randomly Amplified DNA Fingerprinting (RAF) was used to survey genetic relationships between 37 accessions of the tropical fruit G. mangostana (mangosteen) and among 11 accessions from eight other Garcinia species. Although mangosteen is believed to reproduce exclusively through apomixis, our results show that considerable genetic diversity exists within G. mangostana and between other Garcinia species. Among the 37 G. mangostana accessions examined, nine different genotypes were identified which clustered into three distinct groups based on correspondence analysis (reciprocal averaging). For 26 (70%) of the accessions no marker variation was detected over 530 loci screened. A further eight (22%) accessions exhibited very low levels of variation (0.2-1%) suggesting at least one well conservedm angosteen genotype. The remaining three accessions (8%) showed extensive variation (22-31%) compared with the majority of accessions. The three mangosteen groups were 63-70% dissimilar to the other Garcinia species investigated. The genetic diversity identified in this research will assist in the conservation of Garcinia germplasm and provides a valuable framework for the genetic improvement of mangosteen.

Reliability of vegetation community information derived using decorana ordination and fuzzy c-means clustering

Descriptions of vegetation communities are often based on vague semantic terms describing species presence and dominance. For this reason, some researchers advocate the use of fuzzy sets in the statistical classification of plant species data into communities. In this study, spatially referenced vegetation abundance values collected from Greek phrygana were analysed by ordination (DECORANA), and classified on the resulting axes using fuzzy c-means to yield a point data-set representing local memberships in characteristic plant communities. The fuzzy clusters matched vegetation communities noted in the field, which tended to grade into one another, rather than occupying discrete patches. The fuzzy set representation of the community exploited the strengths of detrended correspondence analysis while retaining richer information than a TWINSPAN classification of the same data. Thus, in the absence of phytosociological benchmarks, meaningful and manageable habitat information could be derived from complex, multivariate species data. We also analysed the influence of the reliability of different surveyors' field observations by multiple sampling at a selected sample location. We show that the impact of surveyor error was more severe in the Boolean than the fuzzy classification. © 2007 Springer.