O ser idoso estomizado sob o olhar complexo: uma proposta de gerontotecnologia educativa

Na presença da estomia, o idoso pode apresentar maior grau de complicações e dificuldades no processo de adaptação, talvez porque a estomia envolva significados que dizem respeito à auto-imagem e à presença/aumento de dependência. Resgatar a necessidade do autocuidado do idoso em relação à saúde é fundamental para que, no cuidado, se obtenha sua participação e mobilização diária quanto à formulação do processo educativo em saúde. Este estudo tem como objetivos identificar as características do idoso estomizado, atendido em um serviço de estomaterapia e propor uma gerontotecnologia educativa que venha a contribuir no cuidado de idosos estomizados, à luz da Complexidade, de Edgar Morin. Foi realizada uma pesquisa, com abordagem qualitativa, do tipo estudo de caso, tendo como local um serviço de estomaterapia, o qual possibilitou contato com fichas cadastrais e via telefone com os sujeitos e, depois, com o domicílio do idoso, no Rio Grande, Rio Grande do Sul, Brasil. Os sujeitos do estudo totalizaram 4 (quatro) idosos, sendo três mulheres e um homem. Foram utilizados, como instrumento, o formulário e o ecomapa, e como técnicas, a entrevista, a observação assistemática e a gravação. Foram respeitadas as normas éticas. A análise dos dados deu-se por: 1) leitura exaustiva dos dados; 2) apresentação dos casos e seus ecomapas tendo como suporte a Complexidade de Edgar Morin; 3) redescoberta de conceitos, a priori, que ilustraram a visão do idoso com estomia: ser humano idoso estomizado complexo, saúde complexa do idoso estomizado, cuidado complexo ao idoso estomizado e sua família. Por fim, elaborou-se uma cartilha educativa, junto ao idoso, como facilitadora para o autocuidado. Quanto aos resultados, verificou-se que cada idoso estomizado está permeado por situações pontuais e, a partir disso, percebeu-se diferentes concepções recursivas e formas de enfrentamento na adaptação. A aceitação da mudança corporal e psicológica mostrou-se mais fácil, quando se verificou apoio familiar, instrução técnica anterior ou presença de pessoas conhecidas. O enfrentamento da doença e a possibilidade da morte são aspectos presentes para os idosos e que limitam suas atividades de vida diária. Assim, surgiram conceitos que contemplaram o ser humano em sua totalidade, com incertezas e significados. A visão que transcende a complexidade da estomia engloba um cuidado que busca integrar a família do idoso com estomia, estimulando-o ao autocuidado e ao acolhimento diário, reforçando a auto-estima, como estratégia de recomeço em meio a desafios permanentes: ser idoso e ter uma estomia. Lançar um novo olhar sobre a temática idoso estomizado é complexo, exigindo abordagem multidimensional das características que o envolvem. Acreditase que mudanças favoráveis poderão advir após implementação de um programa de educação em saúde que contemple a singularidade das questões que envolvem o idoso estomizado e suas necessidades.

On the reduction theory of binary forms

Cremona developed a reduction theory for binary forms of degree 3 and 4 with integer coefficients, the motivation in the case of quartics being to improve 2-descent algorithms for elliptic curves over Q. In this paper we extend some of these results to forms of higher degree. One application of this is to the study of hyperelliptic curves.

How does employer support and educational background effect an Ergonomics Practitioner’s awareness of the relationship between ergonomics and psychosocial hazard control?

There is a growning need to address psychological health and safety in the workplace. Ergonomics tends to be widely recognized for its physical applications, such as ¨office¨ and ¨manual materials handling¨ however the other domains of specialization of ergonomics (cognitive and organizational) appear to be less well known. This study evaluates the level of understanding that professionals who practice ergonomics have of the relation between ergonomics and the control of psychosocial hazards in the workplace. A survey was distributed to ergonomics practitioners and asked them about their awareness of the relation between ergonomics and workplace psychosocial hazard control. Ergonomists and human factors specialists demonstrated a greater awareness of this relationship than other allied occupational groups that also practice ergonomics, however they indicated that there may be difficulties in the “real world” applying these areas of knowledge into practice. Participants who demonstrated a high level of awareness of the relation between ergonomics and psychosocial hazard control demonstrated stronger organizational commitment than participants with a low awareness. Ergonomics practitioners who reported having employer support for professional development also demonstrated a higher degree of awareness of the relation between ergonomics and psychosocial hazard control, as did the professionals who had been practicing in the field the longest. This research provides some insight for professional associations for Ergonomists, employers of Ergonomists, and human resource professionals about how ergonomics practitioners perceive the ergonomics field and the profession as well as their employing organization.

Effect of sildenafil in renal ischemia/reperfusion injury in rats

To evaluate the effect of sildenafil, administered prior to renal ischemia/reperfusion (I/R), by scintigraphy and histopathological evaluation in rats. Methods: Twenty-four rats were divided randomly into two groups. They received 0.1 ml of 99mTechnetium-etilenodicisteine intravenous, and a baseline (initial) renal scintigraphy was performed. The rats underwent 60 minutes of ischemia by left renal artery clamping. The right kidney was not manipulated. The sildenafil group (n=12) received orally 1 mg/kg of sildenafil suspension 60 minutes before ischemia. Treatment with saline 0.9% in the control group (n=12). Half of the rats was assessed after 24 hours and half after seven days I/R, with new renal scintigraphy to study differential function. After euthanasia, kidneys were removed and subjected to histopathological examination. For statistical evaluation, Student t and Mann-Whitney tests were used. Results: In the control group rats, the left kidneys had significant functional deficit, seven days after I/R, whose scintigraphic pattern was consistent with acute tubular necrosis, compared with the initial scintigraphy (p<0.05). Sildenafil treatment resulted in better differential function of the left kidneys 24h after reperfusion, compared with controls. Histopathologically, the left kidney of control rats (24 hours after I/R) showed a higher degree of cellular necrosis when compared with the sildenafil treated rats (p<0.05). Conclusion: Sildenafil had a protective effect in rat kidneys subjected to normothermic I/R, demonstrated by scintigraphy and histomorphometry

Tourist Destination Image in the New Technological Environments: Dialogism under the Public Relations Gaze

The dependence and influence of new media on social and organizational life have led to a new orientation of the communicational practices of organizations and to a research paradigm shift to a cocriational model within public relations theory. This model is based on dialogic rhetoric and dialogue that requires a joint production of content and meanings by organizations and publics, which have a central role in shaping image. The new social and communicational paradigms have also an impact on tourism research, implying the need to understand the role of new technologies, particularly websites, in image formation. The purpose of this study is to investigate the role of website in the formation of a tourist destination image (Portugal) through the understanding of the degree of adoption of dialogical principles on websites by official and unofficial tourist organizations and the identifying of denotative and connotative elements that are represented on published and shared photographs in these websites. The research corpus consisted of websites of entities and photographs published and shared on these websites. The methodology used is quantitative and qualitative, based on content analysis of data of websites and photographs. Results indicate that official tourist entities adopted the dialogic principles in a higher degree than unofficials. There is also a higher adoption of the principles related to technical dimension than dialogical dimension. Results confirm a relation between the adoption of dialogical link and an increased openness by entities to the possibility of photo sharing. The analysis of denotative and connotative elements of photography reflects a similarity in representations of entities and tourists. This study contributes to both theoretical perspectives, because it provides a conceptual scheme of destination image formation online and to a practical perspective, because it also suggests guidelines of dialogical practices to incorporate in websites of tourism entities.

¿Puede la gestión del conocimiento influir en los resultados empresariales?

El objetivo de este artículo es analizar la influencia de la gestión del conocimiento en los resultados empresariales. En primer lugar, se ha realizado una revisión de la literatura, que ha permitido establecer las dimensiones más comunes de la gestión del conocimiento y de los resultados, para su posterior medición. Se han tomado como dimensiones de la gestión del conocimiento: la creación; el almacenamiento y la transferencia; y la aplicación y uso del conocimiento. La adquisición de información, la diseminación de ésta y la interpretación compartida se han utilizado como medidas para la creación de conocimiento. Asimismo, se han utilizado como medidas de la aplicación y uso del conocimiento, el empowerment, el trabajo en equipo y el compromiso con el conocimiento. Como dimensiones de los resultados se han utilizado resultados operativos, financieros y de innovación. La metodología utilizada se basa en el estudio del caso, a través de datos primarios y secundarios. Los resultados obtenidos muestran que la gestión del conocimiento influye en los resultados tanto operativos, como financieros y de innovación. De este modo, las empresas analizadas que tienen un mayor grado de gestión del conocimiento, a través del trabajo en equipo, incremento del empowerment, flexibilización en la toma de decisiones y una visión global de la empresa, entre otras prácticas, obtienen mayores resultados, tanto operativos, como financieros y de innovación.

Trajectory prediction uncertainty modelling for Air Traffic Management

The anticipated growth of air traffic worldwide requires enhanced Air Traffic Management (ATM) technologies and procedures to increase the system capacity, efficiency, and resilience, while reducing environmental impact and maintaining operational safety. To deal with these challenges, new automation and information exchange capabilities are being developed through different modernisation initiatives toward a new global operational concept called Trajectory Based Operations (TBO), in which aircraft trajectory information becomes the cornerstone of advanced ATM applications. This transformation will lead to higher levels of system complexity requiring enhanced Decision Support Tools (DST) to aid humans in the decision making processes. These will rely on accurate predicted aircraft trajectories, provided by advanced Trajectory Predictors (TP). The trajectory prediction process is subject to stochastic effects that introduce uncertainty into the predictions. Regardless of the assumptions that define the aircraft motion model underpinning the TP, deviations between predicted and actual trajectories are unavoidable. This thesis proposes an innovative method to characterise the uncertainty associated with a trajectory prediction based on the mathematical theory of Polynomial Chaos Expansions (PCE). Assuming univariate PCEs of the trajectory prediction inputs, the method describes how to generate multivariate PCEs of the prediction outputs that quantify their associated uncertainty. Arbitrary PCE (aPCE) was chosen because it allows a higher degree of flexibility to model input uncertainty. The obtained polynomial description can be used in subsequent prediction sensitivity analyses thanks to the relationship between polynomial coefficients and Sobol indices. The Sobol indices enable ranking the input parameters according to their influence on trajectory prediction uncertainty. The applicability of the aPCE-based uncertainty quantification detailed herein is analysed through a study case. This study case represents a typical aircraft trajectory prediction problem in ATM, in which uncertain parameters regarding aircraft performance, aircraft intent description, weather forecast, and initial conditions are considered simultaneously. Numerical results are compared to those obtained from a Monte Carlo simulation, demonstrating the advantages of the proposed method. The thesis includes two examples of DSTs (Demand and Capacity Balancing tool, and Arrival Manager) to illustrate the potential benefits of exploiting the proposed uncertainty quantification method.

Architectural-Physical Co-Design of 3D CPUs with Micro-Fluidic Cooling

The performance, energy efficiency and cost improvements due to traditional technology scaling have begun to slow down and present diminishing returns. Underlying reasons for this trend include fundamental physical limits of transistor scaling, the growing significance of quantum effects as transistors shrink, and a growing mismatch between transistors and interconnects regarding size, speed and power. Continued Moore's Law scaling will not come from technology scaling alone, and must involve improvements to design tools and development of new disruptive technologies such as 3D integration. 3D integration presents potential improvements to interconnect power and delay by translating the routing problem into a third dimension, and facilitates transistor density scaling independent of technology node. Furthermore, 3D IC technology opens up a new architectural design space of heterogeneously-integrated high-bandwidth CPUs. Vertical integration promises to provide the CPU architectures of the future by integrating high performance processors with on-chip high-bandwidth memory systems and highly connected network-on-chip structures. Such techniques can overcome the well-known CPU performance bottlenecks referred to as memory and communication wall. However the promising improvements to performance and energy efficiency offered by 3D CPUs does not come without cost, both in the financial investments to develop the technology, and the increased complexity of design. Two main limitations to 3D IC technology have been heat removal and TSV reliability. Transistor stacking creates increases in power density, current density and thermal resistance in air cooled packages. Furthermore the technology introduces vertical through silicon vias (TSVs) that create new points of failure in the chip and require development of new BEOL technologies. Although these issues can be controlled to some extent using thermal-reliability aware physical and architectural 3D design techniques, high performance embedded cooling schemes, such as micro-fluidic (MF) cooling, are fundamentally necessary to unlock the true potential of 3D ICs. A new paradigm is being put forth which integrates the computational, electrical, physical, thermal and reliability views of a system. The unification of these diverse aspects of integrated circuits is called Co-Design. Independent design and optimization of each aspect leads to sub-optimal designs due to a lack of understanding of cross-domain interactions and their impacts on the feasibility region of the architectural design space. Co-Design enables optimization across layers with a multi-domain view and thus unlocks new high-performance and energy efficient configurations. Although the co-design paradigm is becoming increasingly necessary in all fields of IC design, it is even more critical in 3D ICs where, as we show, the inter-layer coupling and higher degree of connectivity between components exacerbates the interdependence between architectural parameters, physical design parameters and the multitude of metrics of interest to the designer (i.e. power, performance, temperature and reliability). In this dissertation we present a framework for multi-domain co-simulation and co-optimization of 3D CPU architectures with both air and MF cooling solutions. Finally we propose an approach for design space exploration and modeling within the new Co-Design paradigm, and discuss the possible avenues for improvement of this work in the future.

Antimicrobial resistance and species composition of Enterococcus spp. isolated from waters and sands of marine recreational beaches in Southeastern Brazil

Density, species composition and antimicrobial resistance in bacteria of the Enterococcus genus were evaluated in seawater and sands from 2 marine recreational beaches with different levels of pollution. The 2 beaches showed predominance of Enterococcus faecalis and Enterococcus faecium, in the water and the sand. Dry sand presented higher densities of Enterococcus sp. and higher frequency of resistant strains than wet sand and seawater. The beach with a higher degree of pollution presented higher percentages of resistant strains (66.7% and 61.5%, in sand and in water, respectively) and resistance to a larger number of antimicrobials compared with the less polluted beach, Ilha Porchat (35.7% and 31.25% of resistant strains in sand and water, respectively). in water samples, the highest frequencies of resistance were obtained against streptomycin (38.5%) and erythromycin (25%), whilst in sand, the highest frequencies were observed in relation to erythromycin and tetracycline (38.1% and 14.3%, respectively). These results show that water and sands from beaches with high indexes of faecal contamination of human origin may be potential sources of contamination by pathogens and contribute to the dissemination of bacterial resistance. (C) 2007 Elsevier Ltd. All rights reserved.

Composite Indicators for the Family Change: ‘Familism' vs ‘Individualism' in the International Context

The aim of this paper is to propose a composite indicator to measure ‘familism’, conformed by two main dimensions: values on one hand (duty to take care of the family, importance of the family, sacrifices for the family...) and behaviours, on the other (predominance of married couples instead of cohabitant couples, high frequency of contact among members, family support…). In contrast to this idea of ‘familism’ we find that of individualism, that defends the independence of family members, tolerance to new family models, cohabitation instead of marriage,… , that implies less frequency of interaction among relatives and more governmental intervention towards children and elderly care. We observe that a higher degree of ‘familism’ does not always match with a lower degree of individualism when both dimensions, attitudes and behaviours, are considered. For instance, we find countries which are individualist in values but not in behaviours (such as Spain), whilst others, such as Japan, are ‘familist’ both in values and behaviours and finally, others, such as Sweden, are individualist with regards to both perspectives. We propose two different methodological approaches to the question. First, we use microdata from the Family, Work and Gender Roles module of the International Social Survey Programme-ISSP (years 1994, 2002 and 2012), in which 45 countries have participated. Information for the three rounds is collected for 17 countries with very different family values and welfare systems (for instance, Sweden, Japan, Russia, Spain, United Kingdom or the United States). From this data source, we create a first index on familism that can be related to individual sociodemographic characteristics. Second, we complete it through the inclusion of macro data (such as the divorce rate per country), in order to refine comparison at a country level by adding new variables to the previous index.

Composite Indicators for the Family Change: ‘Familism' vs ‘Individualism' in the International Context

The aim of this paper is to propose a composite indicator to measure ‘familism’, conformed by two main dimensions: values on one hand (duty to take care of the family, importance of the family, sacrifices for the family...) and behaviours, on the other (predominance of married couples instead of cohabitant couples, high frequency of contact among members, family support…). In contrast to this idea of ‘familism’ we find that of individualism, that defends the independence of family members, tolerance to new family models, cohabitation instead of marriage,… , that implies less frequency of interaction among relatives and more governmental intervention towards children and elderly care. We observe that a higher degree of ‘familism’ does not always match with a lower degree of individualism when both dimensions, attitudes and behaviours, are considered. For instance, we find countries which are individualist in values but not in behaviours (such as Spain), whilst others, such as Japan, are ‘familist’ both in values and behaviours and finally, others, such as Sweden, are individualist with regards to both perspectives. We propose two different methodological approaches to the question. First, we use microdata from the Family, Work and Gender Roles module of the International Social Survey Programme-ISSP (years 1994, 2002 and 2012), in which 45 countries have participated. Information for the three rounds is collected for 17 countries with very different family values and welfare systems (for instance, Sweden, Japan, Russia, Spain, United Kingdom or the United States). From this data source, we create a first index on familism that can be related to individual sociodemographic characteristics. Second, we complete it through the inclusion of macro data (such as the divorce rate per country), in order to refine comparison at a country level by adding new variables to the previous index.

Materials design for ambipolar devices: tuning orbital energetics in oligothiophene-naphthalimides semiconductors

Ambipolar organic field-effect transistors (OFETs), which can efficiently transport both holes and electrons, using a single type of electrode, are currently of great interest due to their possible applications in complementary metal oxide semiconductor (CMOS)-like circuits, sensors, and in light-emitting transistors. Several theoretical and experimental studies have argued that most organic semiconductors should be able to transport both types of carrier, although typically unipolar behavior is observed. One factor that can compromise ambipolar transport in organic semiconductors is poor solid state overlap between the HOMO (p-type) or LUMO (n-type) orbitals of neighboring molecules in the semiconductor thin film. In the search of low-bandgap ambipolar materials, where the absence of skeletal distortions allows closer intermolecular π-π stacking and enhanced intramolecular π-conjugation, a new family of oligothiophene-naphthalimide assemblies have been synthesized and characterized, in which both donor and acceptor moieties are directly conjugated through rigid linkers. In previous works we found that oligothiophene-napthalimide assemblies connected through amidine linkers (NDI derivates) exhibit skeletal distortions (50-60º) arising from steric hindrance between the carbonyl group of the arylene core and the sulphur atom of the neighbored thiophene ring (see Figure 1). In the present work we report novel oligo- and polythiophene–naphthalimide analogues NAI-3T, NAI-5T and poly-NAI-8C-3T, in which the connections of the amidine linkage have been inverted in order to prevent steric interactions. Thus, the nitrogen atoms are directly connected to the naphthalene moiety in NAI derivatives while they were attached directly to the thiophene moiety in the previously investigated NDI-3T and NDI-5T. In Figure 1 is depicted the calculated molecular structure of NAI-3T together with that of NDI-3T showing how the steric interactions are not present in the novel NAI derivative. The planar skeletons in these new family induce higher degree of crystallinity and the carrier charge transport can be switched from n-type to ambipolar behaviour. The highest FET performance is achieved for vapor-deposited films of NAI-3T with mobilities of 1.95x10-4cm2V-1s-1 and 2.00x10-4cm2V-1s-1 for electrons and holes, respectively. Finally, these planar semiconductors are compared with their NDI derivates analogues, which exhibit only n-type mobility, in order to understand the origin of the ambipolarity in this new series of molecular semiconductors.

Avaliação dos principais programas de boas práticas agropecuárias implantados no Brasil para promover a sustentabilidade da cadeia leiteira

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Agronomia e Medicina Veterinária, 2016.

Influence of kaolin addition on the dynamics of oxygen mass transport in polyvinyl alcohol dispersion coatings

The permeability of dispersion barriers produced from polyvinyl alcohol (PVOH) and kaolin clay blends coated onto polymeric supports has been studied by employing two different measurement methods: the oxygen transmission rate (OTR) and the ambient oxygen ingress rate (AOIR). Coatings with different thicknesses and kaolin contents were studied. Structural information of the dispersion-barrier coatings was obtained by Fourier transform infrared spectroscopy (FTIR) spectroscopy and scanning electron microscopy (SEM). These results showed that the kaolin content influences both the orientation of the kaolin and the degree of crystallinity of the PVOH coating. Increased kaolin content increased the alignment of the kaolin platelets to the basal plane of the coating. Higher kaolin content was accompanied by higher degree of crystallinity of the PVOH. The barrier thickness proved to be less important in the early stages of the mass transport process, whereas it had a significant influence on the steady-state permeability. The results from this study demonstrate the need for better understanding of how permeability is influenced by (chemical and physical) structure.

La disrupción: el punto de partida de la resiliencia o del fracaso empresarial (reflexiones desde la ingeniería)

La perdurabilidad empresarial ha sido un tema recurrente en la literatura sobre dirección de empresas. A pesar de los avances, la liquidación de las empresas aumenta permanentemente. Buscando alternativas de mejora se estudia el caso de dos empresas cuadragenarias dedicadas a prestar servicios de consultoría en ingeniería eléctrica y civil que, en condiciones de crisis, implementaron acciones que les permitieron, no sólo mantenerse en el mercado sino también fortalecer su estructura financiera. Los resultados demostraron que un enfoque equilibrado caracterizado por la toma oportuna de decisiones y la definición e implementación de estrategias de negocio efectivas constituyen herramientas óptimas para asegurar un mayor grado de resiliencia empresarial.