Caracterización de parámetros petrofísicos relacionados con la capacidad de almacenamiento de CO2 en el acuífero salino profundo de Hontomín (Burgos)

La conciencia de la crisis de la modernidad -que comienza ya a finales del siglo XIX- ha cobrado más experiencia debido al conocimiento de los límites del desarrollo económico, ya que como parecía razonable pensar, también los recursos naturales son finitos. En 1972, el Club de Roma analizó las distintas opciones disponibles para conseguir armonizar el desarrollo sostenible y las limitaciones medioambientales. Fue en 1987 cuando la Comisión Mundial para el Medio Ambiente y el Desarrollo de la ONU definía por primera vez el concepto de desarrollo sostenible. Definición que posteriormente fue incorporada en todos los programas de la ONU y sirvió de eje, por ejemplo, a la Cumbre de la Tierra celebrada en Río de Janeiro en 1992. Parece evidente que satisfacer la demanda energética, fundamentalmente desde la Revolución Industrial en el s XIX, trajo consigo un creciente uso de los combustibles fósiles, con la consiguiente emisión de los gases de efecto invernadero (GEI) y el aumento de la temperatura global media terrestre. Esta temperatura se incrementó en los últimos cien años en una media de 0.74ºC. La mayor parte del incremento observado desde la mitad del siglo XX en esta temperatura media se debe, con una probabilidad de al menos el 90%, al aumento observado en los GEI antropogénicos, siendo uno de ellos el CO2 que proviene de la transformación del carbono de los combustibles fósiles durante su combustión. Ante el creciente uso de los combustibles fósiles, los proyectos CAC, proyectos de captura, transporte y almacenamiento, se presentan como una contribución al desarrollo sostenible ya que se trata de una tecnología que permite mitigar el cambio climático. Para valorar si la tecnología CAC es sostenible, habrá que comprobar si existe o no capacidad para almacenar el CO2 en una cantidad mayor a la de producción y durante el tiempo necesario que impone la evolución de la concentración de CO2 en la atmósfera para mantenerla por debajo de las 450ppmv (concentración de CO2 que propone el Panel Intergubernamental para el Cambio Climático). El desarrollo de los proyectos CAC completos pasa por la necesaria selección de adecuados almacenes de CO2 que sean capaces de soportar los efectos de las presiones de inyección, así como asegurar la capacidad de dichos almacenes y la estanqueidad del CO2 en los mismos. La caracterización geológica de un acuífero susceptible de ser almacén de CO2 debe conducir a determinar las propiedades que dicho almacén posee para asegurar un volumen adecuado de almacenamiento, una inyectabilidad del CO2 en el mismo a un ritmo adecuado y la estanqueidad del CO2 en dicho acuífero a largo plazo. El presente trabajo pretende estudiar los parámetros que tienen influencia en el cálculo de la capacidad del almacén, para lo que en primer lugar se ha desarrollado la tecnología necesaria para llevar a cabo la investigación mediante ensayos de laboratorio. Así, se ha desarrollado una patente, "ATAP, equipo para ensayos petrofísicos (P201231913)", con la que se ha llevado a cabo la parte experimental de este trabajo para la caracterización de los parámetros que tienen influencia en el cálculo de la capacidad del almacén. Una vez desarrollada la tecnología, se aborda el estudio de los distintos parámetros que tienen influencia en la capacidad del almacén realizando ensayos con ATAP. Estos ensayos definen el volumen del almacenamiento, llegándose a la conclusión de que en la determinación de este volumen, juegan un papel importante el alcance de los mecanismos trampa, físicos o químicos, del CO2 en el almacén. Ensayos que definen la capacidad del almacén de "aceptar" o "rechazar" el CO2 inyectado, la inyectabilidad, y por último, ensayos encaminados a determinar posibles fugas que se pueden dar a través de los pozos de inyección, definidos estos como caminos preferenciales de fugas en un almacén subterráneo de CO2. Queda de este modo caracterizada la estanqueidad del CO2 en el acuífero a largo plazo y su influencia obvia en la determinación de la capacidad del almacén. Unido al propósito de la estimación de la capacidad del almacén, se encuentra el propósito de asegurar la estanqueidad de dichos almacenes en el tiempo, y adelantarse a la evolución de la pluma de CO2 en el interior de dichos almacenes. Para cumplir este propósito, se ha desarrollado un modelo dinámico a escala de laboratorio, mediante el programa ECLIPSE 300, con el fin de establecer una metodología para el cálculo de la capacidad estimada del almacén, así como el estudio de la evolución de la pluma de CO2 dentro del acuífero a lo largo del tiempo, partiendo de los resultados obtenidos en los ensayos realizados en ATAP y con la modelización de la probeta de roca almacén empleada en dichos ensayos. Presentamos por tanto un trabajo que establece las bases metodológicas para el estudio de la influencia de distintos parámetros petrofísicos en el cálculo de la capacidad del almacén unidos al desarrollo tecnológico de ATAP y su utilización para la determinación de dichos parámetros aplicables a cada acuífero concreto de estudio. ABSTRACT The crisis of modernity –which begins at the end of 19th Century- has been more important due to the knowledge of the limits of economic development, since it appeared to be thought reasonable, the natural resources are finite. In 1972, The Club of Rome analyzed the different options available in order to harmonize the sustainability and the environment development. It was in 1987 when The Global Commission on The Environment and the Development of UN, defined for the first time the concept of Sustainable Development. This definition that was fully incorporated in all the UN programs and it was useful as an axis, for example, in La Cumbre de la Tierra summit in Río de Janeiro in 1992. It seems obvious to satisfy energetic demand, basically after The Industrial Revolution in 19th Century, which represented an increasing use of fossil fuels, therefore greenhouse gases emission and the increasing of global average temperature. This temperature increased in the last 100 years up to 0.74ºC. The major part of the temperature increase is due to the increase observed in Greenhouse gases with human origin, at least with 90% of probability. The most important gas is the CO2 because of its quantity. In the face of the increasing use of fossil fuels, the CCS projects, Carbon Capture and Storage projects, appear as a contribution of sustainable development since it is a technology for avoiding the climate change. In order to evaluate if CCS technology is sustainable, it will be necessary to prove if the capacity for CO2 storage is available or not in a quantity greater than the production one and during the time necessary to keep the CO2 concentration in the atmosphere lower than 450ppmv (concentration imposed by IPCC). The development of full CCS projects goes through the selection of good CO2 storages that are able to support the effects of pressure injection, and assure the capacity of such storages and the watertightness of CO2. The geological characterization of the aquifer that could be potential CO2 storage should lead to determine the properties that such storage has in order to assure the adequate storage volume, the CO2 injectivity in a good rate, and the watertightness of the CO2 in the long term. The present work aims to study the parameters that have influence on the calculation of storage capacity, and for that purpose the appropriate technology has been developed for carrying out the research by mean of laboratory tests. Thus, a patent has been developed, "ATAP, equipo para ensayos petrofísicos (P201231913)", that has been used for developing the experimental part of this work. Once the technology has been developed, the study of different parameters, that have influence on the capacity of the storage, has been addressed developing different tests in ATAP. These tests define the storage volume which is related to the scope of different CO2 trap mechanisms, physical or chemical, in the storage. Tests that define the capacity of the storage to “accept” or “reject” the injected CO2, the injectivity, and tests led to determine possible leakages through injection wells. In this way we could talk about the watertightness in the aquifer in the long term and its influence on the storage capacity estimation. Together with the purpose of the storage capacity estimation, is the purpose of assuring the watertightness of such storages in the long term and anticipating the evolution of CO2 plume inside such aquifers. In order to fulfill this purpose, a dynamic model has been developed with ECLIPSE 300, for stablishing the methodology for the calculation of storage capacity estimation and the evolution of the CO2 plume, starting out with the tests carried out in ATAP. We present this work that establishes the methodology bases for the study of the influence of different petrophysics parameters in the calculation of the capacity of the storage together with the technological development of ATAP and its utilization for the determination of such parameters applicable to each aquifer.

Monitorización de emisiones de CO2 en un análogo natural mediante correlación con Índices de Vegetación

Entre las soluciones más satisfactorias al problema de las emisiones de CO2 está la captura y almacenamiento de este gas de efecto invernadero en reservorios profundos. Esta técnica implica la necesidad de monitorizar grandes extensiones de terreno. Utilizando una zona de vulcanismo residual, en la provincia de Ciudad Real, se han monitorizado las emisiones de CO2 utilizando imágenes de muy alta resolución espacial. Se han generado índices de vegetación, y estos se han correlacionado con medidas de contenido de CO2 del aire en los puntos de emisión. Los resultados han arrojado niveles de correlación significativos (p. ej.: SAVI = -0,93) y han llevado a descubrir un nuevo punto de emisión de CO2. Palabras clave: teledetección, CO2, vegetación, satélite Monitoring CO2 emissions in a natural analogue by correlating with vegetation indices Abstract: Among the most satisfactory solutions for the CO2 emissions problem is the capture and storage of this greenhouse gas in deep reservoirs. This technique involves the need to monitor large areas. Using a volcanic area with residual activity, in the province of Ciudad Real, CO2 emissions were monitored through very high spatial resolution imagery. Vegetation indexes were generated and correlated with measurements of the air?s CO2 content at the emission points. The results yielded significant correlation levels (e.g.: SAVI = -0.93) and led to the discovery of a new CO2 emission point. Keywords: remote sensing, CO2, vegetation, satellite.

Potential effects of gas hydrate on human welfare

For almost 30 years. serious interest has been directed toward natural gas hydrate, a crystalline solid composed of water and methane, as a potential (i) energy resource, (ii) factor in global climate change, and (iii) submarine geohazard. Although each of these issues can affect human welfare, only (iii) is considered to be of immediate importance. Assessments of gas hydrate as an energy resource have often been overly optimistic, based in part on its very high methane content and on its worldwide occurrence in continental margins. Although these attributes are attractive, geologic settings, reservoir properties, and phase-equilibria considerations diminish the energy resource potential of natural gas hydrate. The possible role of gas hydrate in global climate change has been often overstated. Although methane is a “greenhouse” gas in the atmosphere, much methane from dissociated gas hydrate may never reach the atmosphere, but rather may be converted to carbon dioxide and sequestered by the hydrosphere/biosphere before reaching the atmosphere. Thus, methane from gas hydrate may have little opportunity to affect global climate change. However, submarine geohazards (such as sediment instabilities and slope failures on local and regional scales, leading to debris flows, slumps, slides, and possible tsunamis) caused by gas-hydrate dissociation are of immediate and increasing importance as humankind moves to exploit seabed resources in ever-deepening waters of coastal oceans. The vulnerability of gas hydrate to temperature and sea level changes enhances the instability of deep-water oceanic sediments, and thus human activities and installations in this setting can be affected.

The ionized gas in the CALIFA early-type galaxies I. Mapping two representative cases: NGC 6762 and NGC 5966

As part of the ongoing CALIFA survey, we have conducted a thorough bidimensional analysis of the ionized gas in two E/S0 galaxies, NGC 6762 and NGC 5966, aiming to shed light on the nature of their warm ionized ISM. Specifically, we present optical (3745–7300 Å) integral field spectroscopy obtained with the PMAS/PPAK integral field spectrophotometer. Its wide field-of-view (1′ × 1′) covers the entire optical extent of each galaxy down to faint continuum surface brightnesses. To recover the nebular lines, we modeled and subtracted the underlying stellar continuum from the observed spectra using the STARLIGHT spectral synthesis code. The pure emission-line spectra were used to investigate the gas properties and determine the possible sources of ionization. We show the advantages of IFU data in interpreting the complex nature of the ionized gas in NGC 6762 and NGC 5966. In NGC 6762, the ionized gas and stellar emission display similar morphologies, while the emission line morphology is elongated in NGC 5966, spanning ~6 kpc, and is oriented roughly orthogonal to the major axis of the stellar continuum ellipsoid. Whereas gas and stars are kinematically aligned in NGC 6762, the gas is kinematically decoupled from the stars in NGC 5966. A decoupled rotating disk or an “ionization cone” are two possible interpretations of the elongated ionized gas structure in NGC 5966. The latter would be the first “ionization cone” of such a dimension detected within a weak emission-line galaxy. Both galaxies have weak emission-lines relative to the continuum[EW(Hα) ≲ 3 Å] and have very low excitation, log([OIII]λ5007/Hβ) ≲ 0.5. Based on optical diagnostic ratios ([OIII]λ5007/Hβ, [NII]λ6584/Hα, [SII]λ6717, 6731/Hα, [OI]λ6300/Hα), both objects contain a LINER nucleus and an extended LINER-like gas emission. The emission line ratios do not vary significantly with radius or aperture, which indicates that the nebular properties are spatially homogeneous. The gas emission in NGC 6762 can be best explained by photoionization by pAGB stars without the need of invoking any other excitation mechanism. In the case of NGC 5966, the presence of a nuclear ionizing source seems to be required to shape the elongated gas emission feature in the “ionization cone” scenario, although ionization by pAGB stars cannot be ruled out. Further study of this object is needed to clarify the nature of its elongated gas structure.

Nitrato na dieta de ruminantes como estratégia nutricional para mitigação de metano entérico

A produção de metano entérico está entre as principais fontes de emissão de gases de efeito estufa dentre as atividades agropecuárias, além de gerar perda energética ao animal de até 12% da energia bruta consumida. Assim, o objetivo deste trabalho foi avaliar o uso de nitrato de cálcio encapsulado na alimentação de ruminantes como estratégia nutricional a mitigação de metano entérico. O experimento consistiu de duas fases. Fase I: Foram testadas dietas suplementadas com produto comercial de nitrato de cálcio encapsulado utilizando a técnica semiautomática de produção de gases in vitro. Meio grama de substrato com 50 mL de meio de incubação e 25 mL de inóculo ruminal foram incubados em frascos de vidro (160 mL) à 39 ºC por 24 horas para determinação da melhor dieta a ser testada in vivo. O primeiro ensaio testou a associação entre a monensina (dietas com e sem adição de monensina) e doses de nitrato encapsulado (0; 1,5 e 3% da matéria seca (MS)) para mitigação de metano in vitro. Não foi observada interação entre monensina e nitrato para as variáveis testadas. O segundo ensaio in vitro testou a interação do tipo de dieta com duas relações concentrado:volumoso, 20:80 e 80:20, e a inclusão de doses de nitrato encapsulado (0; 1,5; 3 e 4,5% MS). Embora não foi observado efeito associativo entre dieta e nitrato para redução de metano, foi observada mudança nos produtos da fermentação ruminal, com redução de propionato, em decorrência da concorrência de nitrato e propianogênicas por hidrogênio mais escasso em dietas com menor fermentação. Fase II: Conforme os resultados obtidos na Fase I, na segunda fase foi avaliado o efeito associativo da relação de concentrado:volumoso da dieta e a dose de nitrato sobre a emissão de metano, constituintes ruminais e toxicidade do nitrato in vivo. Utilizou-se seis borregos canulados no rúmen, distribuídos em delineamento experimental quadrado latino 6 x 6, em fatorial 2 x 3. Os fatores foram tipo de dieta (relação concentrado:volumoso 20:80 e 80:20) e inclusão de doses de nitrato encapsulado na dieta (0; 1,5 e 3% MS) em substituição gradual ao farelo de soja, totalizando seis tratamentos. Os teores de substituição do farelo de soja pelo nitrato foram em equivalente proteico de maneira a deixar as dietas isonitrogenadas. Os animais foram adaptados gradualmente a oferta de nitrato dietético para evitar problemas com toxidez. A análise de toxicidade foi avaliada pela taxa de metahemoglobina no sangue dos ovinos 3 horas após a alimentação. Nitrato reduziu a produção de metano em ambas as dietas. Os níveis de metahemoglobina no sangue dos animais não foram alterados pela adição de nitrato. Foi observado efeito associativo entre o tipo de dieta e nitrato para os produtos da fermentação ruminal, como acetato, que aumentou linearmente nas dietas com 80% de concentrado quando nitrato foi adicionado. Concluí-se que nitrato, utilizado de forma segura, é uma promissora estratégia para redução de metano entérico independentemente do tipo de dieta com que está sendo suplementado

An Analysis of U.S. Air Force Policy and Installation CO2 Emissions to Determine Best Practices for the Implementation of Executive Order 13514

United States Air Force (USAF) energy policy is a measured but aggressive response to federal energy policy guidance. Previous USAF efforts, like those of the federal government, focused primarily on energy intensity reduction, cost, and BTU savings, and in certain cases have resulted in facility greenhouse gas (GHG) emission reductions. The USAF now faces the challenge of integrating GHG reduction goals and inventory requirements set forth in Executive Order 13514. Using USAF reported energy consumption data, facility GHG emission estimates have been synthesized to identify trends and elucidate existing energy best practices to be applied as part of overarching USAF GHG mitigation efforts and to highlight areas of possible concern for the integration of EO 13514 into operational USAF policy.

You'd better bet on the ETS. Bruegel Policy Brief 2013/02, April 2013

The issue: The European Union's emissions trading system (ETS), introduced in 2005, is the centerpiece of EU decarbonisation efforts and the biggest emissions trading scheme in the world. After a peak in May 2008, the price of ETS carbon allowances started to collapse, and industry, civil society and policymakers began to think about how to ‘repair the ETS’. However, the ETS is an effective and efficient tool to mitigate greenhouse gas emissions, and although prices have not been stable, it has evolved to cover more sectors and greenhouse gases, and to become more robust and less distorting. Prices are depressed because of an interplay of fundamental factors and a lack of confidence in the system. Policy challenge The ETS must be stabilised by reinforcing the credibility of the system so that the use of existing low-carbon alternatives (for example burning gas instead of coal) is incentivised and investment in low-carbon assets is ensured. Further-more, failure to reinvigorate the ETS might compromise the cost-effective synchronisation of European decarbonisation efforts across sectors and countries. To restore credibility and to ensure long-term commitment to the ETS, the European Investment Bank should auction guarantees on the future emission allowance price.This will reduce the risk for low-carbon investments and enable stabilisation of the ETS until a compromise is found on structural measures to reinforce it in order to achieve the EU's long-term decarbonisation targets.

The EU regime on biofuels in transport: Still in search of sustainability. Egmont Paper No. 68, July 2014

Like other regions of the world, the EU is developing biofuels in the transport sector to reduce oil consumption and mitigate climate change. To promote them, it has adopted favourable legislation since the 2000s. In 2009 it even decided to oblige each Member State to ensure that by 2020 the share of energy coming from renewable sources reached at least 10% of their final consumption of energy in the transport sector. Biofuels are considered the main instrument to reach that percentage since the development of other alternatives (such as hydrogen and electricity) will take much longer than expected. Meanwhile, these various legislative initiatives have driven the production and consumption of biofuels in the EU. Biofuels accounted for 4.7% of EU transport fuel consumption in 2011. They have also led to trade and investment in biofuels on a global scale. This large-scale expansion of biofuels has, however, revealed numerous negative impacts. These stem from the fact that first-generation biofuels (i.e., those produced from food crops), of which the most important types are biodiesel and bioethanol, are used almost exclusively to meet the EU’s renewable 10% target in transport. Their negative impacts are: socioeconomic (food price rises), legal (land-grabbing), environmental (for instance, water stress and water pollution; soil erosion; reduction of biodiversity), climatic (direct and indirect land-use effects resulting in more greenhouse gas emissions) and public finance issues (subsidies and tax relief). The extent of such negative impacts depends on how biofuel feedstocks are produced and processed, the scale of production, and in particular, how they influence direct land use change (DLUC) and indirect land use change (ILUC) and the international trade. These negative impacts have thus provoked mounting debates in recent years, with a particular focus on ILUC. They have forced the EU to re-examine how it deals with biofuels and submit amendments to update its legislation. So far, the EU legislation foresees that only sustainable biofuels (produced in the EU or imported) can be used to meet the 10% target and receive public support; and to that end, mandatory sustainability criteria have been defined. Yet they have a huge flaw. Their measurement of greenhouse gas savings from biofuels does not take into account greenhouse gas emissions resulting from ILUC, which represent a major problem. The Energy Council of June 2014 agreed to set a limit on the extent to which firstgeneration biofuels can count towards the 10% target. But this limit appears to be less stringent than the ones made previously by the European Commission and the European Parliament. It also agreed to introduce incentives for the use of advanced (second- and third-generation) biofuels which would be allowed to count double towards the 10% target. But this again appears extremely modest by comparison with what was previously proposed. Finally, the approach chosen to take into account the greenhouse gas emissions due to ILUC appears more than cautious. The Energy Council agreed that the European Commission will carry out a reporting of ILUC emissions by using provisional estimated factors. A review clause will permit the later adjustment of these ILUC factors. With such legislative orientations made by the Energy Council, one cannot consider yet that there is a major shift in the EU biofuels policy. Bolder changes would have probably meant risking the collapse of the high-emission conventional biodiesel industry which currently makes up the majority of Europe’s biofuel production. The interests of EU farmers would have also been affected. There is nevertheless a tension between these legislative orientations and the new Commission’s proposals beyond 2020. In any case, many uncertainties remain on this issue. As long as solutions have not been found to minimize the important collateral damages provoked by the first generation biofuels, more scientific studies and caution are needed. Meanwhile, it would be wise to improve alternative paths towards a sustainable transport sector, i.e., stringent emission and energy standards for all vehicles, better public transport systems, automobiles that run on renewable energy other than biofuels, or other alternatives beyond the present imagination.

The uncertain future of the coal energy industry in Germany. OSW COMMENTARY #188, 2015-10-20

Germany’s current energy strategy, known as the “energy transition”, or Energiewende, involves an accelerated withdrawal from the use of nuclear power plants and the development of renewable energy sources (RES). According to the government’s plans, the share of RES in electricity production will gradually increase from its present rate of 26% to 80% in 2050. Greenhouse gas emissions are expected to fall by 80–95% by 2050 when compared to 1990 levels. However, coal power plants still predominate in Germany’s energy mix – they produced 44% of electricity in 2014 (26% from lignite and 18% from hard coal). This makes it difficult to meet the emission reduction objectives, lignite combustion causes the highest levels of greenhouse gas emissions. In order to reach the emission reduction goals, the government launched the process of accelerating the reduction of coal consumption. On 2 July, the Federal Ministry for Economic Affairs and Energy published a plan to reform the German energy market which will be implemented during the present term of government. Emission reduction from coal power plants is the most important issue. This problem has been extensively discussed over the past year and has transformed into a conflict between the government and the coal lobby. The dispute reached its peak when lignite miners took to the streets in Berlin. As the government admits, in order to reach the long-term emission reduction objectives, it is necessary to completely liquidate the coal energy industry in Germany. This is expected to take place within 25 to 30 years. However, since the decision to decommission nuclear power plants was passed, the German ecological movement and the Green Party have shifted their attention to coal power plants, demanding that these be decommissioned by 2030 at the latest.

Experimental investigation of the fuel properties of glidfuel, palm oil mill effluent biodiesel and blends

Biofuels derived from industry waste have potential to substitute fossil fuels (Diesel and Gasoline) in internal combustion (IC) engines. Use of waste streams as fuels would help to reduce considerably life-cycle greenhouse gas emissions and minimise waste processing costs. In this study an investigation into the fuel properties of two waste derived biofuels were carried out, they are: (i) Glidfuel (GF) biofuel - a waste stream from paper industry, and (ii) Palm Oil Mill Effluent (POME) biodiesel - biodiesel produced from palm oil industry effluent through various treatment and transesterification process. GF and POME was mixed together at various proportions and separately with fossil diesel (FD) to assess the miscibility and various physical and chemical properties of the blends. Fuel properties such as kinematic viscosity, higher heating value, water content, acid number, density, flash point temperature, CHNO content, sulphur content, ash content, oxidation stability, cetane number and copper corrosion ratings of all the fuels were measured. The properties of GF, POME and various blends were compared with the corresponding properties of the standard FD. Significance of the fuel properties and their expected effects on combustion and exhaust emission characteristics of the IC engine were discussed. Results showed that most properties of both GF and POME biodiesel were comparable to FD. Both GF and POME were miscible with each other, and also separately with the FD. Flash point temperatures of GF and POME biodiesel were 40.7°C and 158.7°C respectively. The flash point temperature of GF was about 36% lower than corresponding FD. The water content in GF and FD were 0.74 (% wt) and 0.01 (% wt) respectively. Acidity values and corrosion ratings of both GF and POME biodiesel were low compared to corresponding value for FD. The study concluded that optimum GF-POME biofuel blends can substitute fossil diesel use in IC engines.

Hybrid Power System Intelligent Operation and Protection Involving Plug-in Electric Vehicles

Two key solutions to reduce the greenhouse gas emissions and increase the overall energy efficiency are to maximize the utilization of renewable energy resources (RERs) to generate energy for load consumption and to shift to low or zero emission plug-in electric vehicles (PEVs) for transportation. The present U.S. aging and overburdened power grid infrastructure is under a tremendous pressure to handle the issues involved in penetration of RERS and PEVs. The future power grid should be designed with for the effective utilization of distributed RERs and distributed generations to intelligently respond to varying customer demand including PEVs with high level of security, stability and reliability. This dissertation develops and verifies such a hybrid AC-DC power system. The system will operate in a distributed manner incorporating multiple components in both AC and DC styles and work in both grid-connected and islanding modes. The verification was performed on a laboratory-based hybrid AC-DC power system testbed as hardware/software platform. In this system, RERs emulators together with their maximum power point tracking technology and power electronics converters were designed to test different energy harvesting algorithms. The Energy storage devices including lithium-ion batteries and ultra-capacitors were used to optimize the performance of the hybrid power system. A lithium-ion battery smart energy management system with thermal and state of charge self-balancing was proposed to protect the energy storage system. A grid connected DC PEVs parking garage emulator, with five lithium-ion batteries was also designed with the smart charging functions that can emulate the future vehicle-to-grid (V2G), vehicle-to-vehicle (V2V) and vehicle-to-house (V2H) services. This includes grid voltage and frequency regulations, spinning reserves, micro grid islanding detection and energy resource support. The results show successful integration of the developed techniques for control and energy management of future hybrid AC-DC power systems with high penetration of RERs and PEVs.

Estimativa da poluição emitida pelos ônibus das linhas troncais da cidade de Uberlândia, MG

The transport of people and goods contributes to the deterioration of the environment in urban areas because of the generation of pollution, such as, air, noise, soil, water or visual degradation. The heavy vehicles that use diesel as fuel are mainly responsible for the emission of nitrogen oxides (NOx) and particulate matter (PM), contributing to participation of the transport sector in air pollution. In addition, there is emission of Greenhouse Gas (GHG) whose main component is carbon dioxide (CO2). In most major cities, public transportation is often considered as a less polluting alternative compared to the private vehicle, in view of the potential to reduce, per passenger, the emissions of GHG and air pollutants. The study area was the city of Uberlândia and the objects of study were the trunk lines of the Sistema Integrado de Transporte (SIT). The emissions of NOx, PM and CO2 were estimated through the bottom-up approach which used the route of each bus line and also fuel consumption obtained through simulation from the TSIS software. The software has some result limitations, there are no report about the emission of pollutants by bus, and it is not able to change specifications for the fuel used by the fleet. The results obtained through calculations of pollutants and GHG emission by the bottom-up approach show that the emission is higher when using fuel comsuption obtained in simulation than using distance. For the results considering fuel and distance there was a reduction in emissions comparing ethanol and diesel.

Relative abundance of anaerobic methanotrophic archaea in bacterial mat Cascadia margin off Oregon

The microbially mediated anaerobic oxidation of methane (AOM) is the major biological sink of the greenhouse gas methane in marine sediments (doi:10.1007/978-94-009-0213-8_44) and serves as an important control for emission of methane into the hydrosphere. The AOM metabolic process is assumed to be a reversal of methanogenesis coupled to the reduction of sulfate to sulfide involving methanotrophic archaea (ANME) and sulfate-reducing bacteria (SRB) as syntrophic partners which were describes amongst others in Boetius et al. (2000; doi:10.1038/35036572). In this study, 16S rRNA-based methods were used to investigate the distribution and biomass of archaea in samples from sediments above outcropping methane hydrate at Hydrate Ridge (Cascadia margin off Oregon) and (ii) massive microbial mats enclosing carbonate reefs (Crimea area, Black Sea). Sediment samples from Hydrate Ridge were obtained during R/V SONNE cruises SO143-2 in August 1999 and SO148-1 in August 2000 at the crest of southern Hydrate Ridge at the Cascadia convergent margin off the coast of Oregon. The second study area is located in the Black Sea and represents a field in which there is active seepage of free gas on the slope of the northwestern Crimea area. Here, a field of conspicuous microbial reefs forming chimney-like structures was discovered at a water depth of 230 m in anoxic waters. The microbial mats were sampled by using the manned submersible JAGO during the R/V Prof. LOGACHEV cruise in July 2001. At Hydrate Ridge the surface sediments were dominated by aggregates consisting of ANME-2 and members of the Desulfosarcina-Desulfococcus branch (DSS) (ANME-2/DSS aggregates), which accounted for >90% of the total cell biomass. The numbers of ANME-1 cells increased strongly with depth; these cells accounted 1% of all single cells at the surface and more than 30% of all single cells (5% of the total cells) in 7- to 10-cm sediment horizons that were directly above layers of gas hydrate. In the Black Sea microbial mats ANME-1 accounted for about 50% of all cells. ANME-2/DSS aggregates occurred in microenvironments within the mat but accounted for only 1% of the total cells. FISH probes for the ANME-2a and ANME-2c subclusters were designed based on a comparative 16S rRNA analysis. In Hydrate Ridge sediments ANME-2a/DSS and ANME-2c/DSS aggregates differed significantly in morphology and abundance. The relative abundance values for these subgroups were remarkably different at Beggiatoa sites (80% ANME-2a, 20% ANME-2c) and Calyptogena sites (20% ANME-2a, 80% ANME-2c), indicating that there was preferential selection of the groups in the two habitats.

Techno-Economic Assessment of LNG and Diesel Production and Global Trading Based on Hybrid PV-Wind Power Plants and PtG, GtL and PtL Technologies

With growing demand for liquefied natural gas (LNG) and liquid transportation fuels, and concerns about climate change and causes of greenhouse gas emissions, this master’s thesis introduces a new value chain design for LNG and transportation fuels and respective fundamental business cases based on hybrid PV-Wind power plants. The value chains are composed of renewable electricity (RE) converted by power-to-gas (PtG), gas-to-liquids (GtL) or power-to-liquids (PtL) facilities into SNG (which is finally liquefied into LNG) or synthetic liquid fuels, mainly diesel, respectively. The RE-LNG or RE-diesel are drop-in fuels to the current energy system and can be traded everywhere in the world. The calculations for the hybrid PV-Wind power plants, electrolysis, methanation (H2tSNG), hydrogen-to-liquids (H2tL), GtL and LNG value chain are performed based on both annual full load hours (FLh) and hourly analysis. Results show that the proposed RE-LNG produced in Patagonia, as the study case, is competitive with conventional LNG in Japan for crude oil prices within a minimum price range of about 87 - 145 USD/barrel (20 – 26 USD/MBtu of LNG production cost) and the proposed RE-diesel is competitive with conventional diesel in the European Union (EU) for crude oil prices within a minimum price range of about 79 - 135 USD/barrel (0.44 – 0.75 €/l of diesel production cost), depending on the chosen specific value chain and assumptions for cost of capital, available oxygen sales and CO2 emission costs. RE-LNG or RE-diesel could become competitive with conventional fuels from an economic perspective, while removing environmental concerns. The RE-PtX value chain needs to be located at the best complementing solar and wind sites in the world combined with a de-risking strategy. This could be an opportunity for many countries to satisfy their fuel demand locally. It is also a specific business case for countries with excellent solar and wind resources to export carbon-neutral hydrocarbons, when the decrease in production cost is considerably more than the shipping cost. This is a unique opportunity to export carbon-neutral hydrocarbons around the world where the environmental limitations on conventional hydrocarbons are getting tighter.

Measuring nitrous oxide emissions from conventional and controlled release fertilisers in south-east Queensland pineapple production

Nitrous oxide (N2O) is a potent greenhouse gas with a global warming potential 298 times higher than carbon dioxide. Soils are a natural source of N2O, contributing 65% of global emissions. This paper is the first in Australia to measure and compare N2O emissions from pre-plant controlled release (CR) and conventional granular (CV) fertilisers in pineapple production using static PVC chambers to capture N2O emissions. Farm 1 cumulative emissions from the CR fertiliser were 3.22 kg ha-1 compared to 6.09 kg ha-1 produced by the CV. At farm 2 the CV blend emitted 2.36 kg ha-1 in comparison to the CR blend of 2.92 kg ha-1. Daily N2O flux rates showed a relationship of direct response to rainfall and soil moisture availability. High emissions were observed for wheel tracks where increased N2O emissions may be linked to soil compaction and waterlogging that creates anaerobic conditions after rain events. Emission measurements over three months highlighted the inconsistencies found in other studies relative to reducing emissions through controlled release nitrogen. More investigations are required to verify the benefits associated with controlled release fertiliser use in pineapples, placement and seasonal timing to address N2O emissions in pineapples.