Egg quality and yolk lipid composition of laying hens fed diets containing cashew nut meal

The objective of this study was to assess the effect of the addition of cashew nuts meal (0, 5, 10, 15, 20, and 25%) to laying hen diets on egg quality and yolk composition. The variables studied were: egg weight, specific gravity, Haugh Units, percentages of shell, albumen, and yolk, moisture, total solids, total lipids, fatty acids profile, and yolk cholesterol. The addition of up to 25% of cashew nuts meal to hen diets did not affect egg quality and freshness, moisture and total solids content. However, an increase in total lipid content and a decrease in yolk pigmentation was observed. Oleic acid level increased in the yolk, whereas palmitic, stearic, and linoleic acid levels decreased. The addition of cashew nuts meal increased the monounsaturated/saturated fatty acid ratio in the yolk and reduced the cholesterol content. Therefore, the use of cashew nuts meal in laying hen diets favorably modifies the fatty acid composition of egg yolk and contributes to a better acceptance of this food by consumers since it also reduces yolk cholesterol levels.

Sensory and physico-chemical characteristics of desserts prepared with egg products processed by freeze and spray drying

In this work, three freeze-dried (FD) egg products (whole egg (WE), egg yolk (EY) and egg white (EW)) were obtained and the acceptability of confections prepared with each was evaluated. Sensory analyses for confections were performed by hedonic testing with fifty panelists in each evaluation. The studied confections were: Condensed Milk Pudding (P), Quindim (Q) and Meringue (M). The results obtained for confections made with FD egg products were compared with the achieved through other formulations of the same desserts made with fresh (F) or spray-dried (SD) egg products. The sensory analysis results for confections made with FD egg products showed good acceptance by panelists. A principal component analysis of the sensory evaluation data was carried out to identify similarities between the different egg products. The PCA supported the conclusion that FD egg products can substitute their fresh and SD counterparts in dessert formulations with good acceptability while keeping the advantages conferred by the freeze-drying method.

Monitoring Directed Energy Deposition Processes in Additive Manufacturing

The purpose of this study is to find out how laser based Directed Energy Deposition processes can benefit from different types of monitoring. DED is a type of additive manufacturing process, where parts are manufactured in layers by using metallic powder or metallic wire. DED processes can be used to manufacture parts that are not possible to manufacture with conventional manufacturing processes, when adding new geometries to existing parts or when wanting to minimize the scrap material that would result from machining the part. The aim of this study is to find out why laser based DED-processes are monitored, how they are monitored and what devices are used for monitoring. This study has been done in the form of a literature review. During the manufacturing process, the DED-process is highly sensitive to different disturbances such as fluctuations in laser absorption, powder feed rate, temperature, humidity or the reflectivity of the melt pool. These fluctuations can cause fluctuations in the size of the melt pool or its temperature. The variations in the size of the melt pool have an effect on the thickness of individual layers, which have a direct impact on the final surface quality and dimensional accuracy of the parts. By collecting data from these fluctuations and adjusting the laser power in real-time, the size of the melt pool and its temperature can be kept within a specified range that leads to significant improvements in the manufacturing quality. The main areas of monitoring can be divided into the monitoring of the powder feed rate, the temperature of the melt pool, the height of the melt pool and the geometry of the melt pool. Monitoring the powder feed rate is important when depositing different material compositions. Monitoring the temperature of the melt pool can give information about the microstructure and mechanical properties of the part. Monitoring the height and the geometry of the melt pool is an important factor in achieving the desired dimensional accuracy of the part. By combining multiple different monitoring devices, the amount of fluctuations that can be controlled will be increased. In addition, by combining additive manufacturing with machining, the benefits of both processes could be utilized.

Droplet Deposition in the Last Stage of Steam Turbine

During the expansion of steam in turbine, the steam crosses the saturation line and hence subsequent turbine stages run under wet condition. The stages under wet condition run with low efficiency as compared to stages running with supersaturated steam and the life of the last stage cascade is reduced due to erosion. After the steam crosses the saturation line it does not condense immediately but instead it becomes supersaturated which is a meta-stable state and reversion of equilibrium results in the formation of large number of small droplets in the range of 0.05 - 1 μm. Although these droplets are small enough to follow the stream lines of vapor however some of the fog droplets are deposited on the blade surface. After deposition they coagulate into films and rivulets which are then drawn towards the trailing edge of the blade due to viscous drag of the steam. These large droplets in the range of radius 100 μm are accelerated by steam until they impact on the next blade row causing erosion. The two phenomenon responsible for deposition are inertial impaction and turbulent-diffusion. This work shall discuss the deposition mechanism in steam turbine in detail and numerically model and validate with practical data.

Pulsed laser deposition of YBa2Cu3O7-[delta]/PrBa2Cu3O7-[delta] /

The process of depositing thin films by the use of pulsed laser deposition (PLD) has become a more widely used technique for the growth of substances in a thin film form. Pulsed laser deposition allows for the stoichiometric film growth of the target which is of great significance in the deposition of High Temperature Superconducting materials. We will describe a system designed using an excimer laser and vaccum chamber in which thin films and superlattices of YBa2Cuj07_i, PrBa2Cu307_i, and YBajCujOr-j/ PrBajCusOr-^ were deposited on SrTiOs. Results of resistivity measurements using the four probe technique will be shown.

Preparation of SrMgx-Ru1-xO3 thin films by pulsed laser deposition /

SrMg^Rui-iOa thin films were made by using pulsed laser deposition on SrTiOa (100) substrates in either O2 or Ar atmosphere. The thin films were characterized by x-ray diffraction, energy dispersive x-ray microanalysis, dc resistivity measurement, and dc magnetization measurement. The effect of Mg doping was observed. As soon as the amount of Mg increased in SrMg-cRui-iOa thin films, the magnetization decreased, and the resistivity increased. It had little effect on the Curie temperature (transition temperature). The magnetization states of SrMgiRui-iOa thin films, for x < 0.15, are similar to SrRuOs films. X-ray diffraction results for SrMga-Rui-iOa thin films made in oxygen showed that the films are epitaxial. The thin films could not be well made in Ar atmosphere during laser ablation as there was no clear peak of SrMg^Rui-iOa in x-ray diffraction results. Substrate temperatures had an effect on the resistivity of the films. The residual resistivity ratios were increased by increasing substrate temperature. It was observed that the thickness of thin films are another factor for film quality: Thin films were epitaxial, but thicker films were not epitaxial.

DEFORMATION OF INTERIOR LAYERED DEPOSITS (ILD) AND THEIR ASSOCIATED LANDFORMS IN WEST CANDOR CHASMA, MARS: IMPLICATIONS FOR THE TIMING OF ILD DEPOSITION

On Mars, interior layered deposits (ILD) provide evidence that water was once stable at the surface of the planet and present in large quantities. In West Candor Chasma, the ILD and their associated landforms record the depositional history of the chasma, and the deformation of those deposits provide insight into the stresses acting on them and the chasma as a whole. The post ILD structural history of West Candor is interpreted by analyzing the spatial relationships and orientation trends of structural features within the ILD. Therecording of stresses through brittle deformation of ILDs implies that the ILD had been lithified before the stress was imposed. Based on the prominent orientation trends of deformation features, the orientation of the stress regime acting upon the ILD appears to be linked to the regime that initially created the chasma-forming faults. An additional minor stress orientation was also revealed and may be related to large structures outside west Candor Chasma. The late depositional history of Ceti Mensa is herein investigated by examining the attributes and spatial relationship between unique corrugated, linear formations (CLF). The CLFs appear to be aeolian in origin but display clear indications of brittle deformation, indicating they have been Iithified. Evidence of lithification and the mineral composition of the surrounding material support the interpretation of circulating water in the area.

The euchromatic and heterochromatic landscapes are shaped by antagonizing effects of transcription on H2A.Z deposition

A role for variant histone H2A.Z in gene expression is now well established but little is known about the mechanisms by which it operates. Using a combination of ChIP-chip, knockdown and expression profiling experiments, we show that upon gene induction, human H2A.Z associates with gene promoters and helps in recruiting the transcriptional machinery. Surprisingly, we also found that H2A.Z is randomly incorporated in the genome at low levels and that active transcription antagonizes this incorporation in transcribed regions. After cessation of transcription, random H2A.Z quickly reappears on genes, demonstrating that this incorporation utilizes an active mechanism. Within facultative heterochromatin, we observe a hyper accumulation of the variant histone, which might be due to the lack of transcription in these regions. These results show how chromatin structure and transcription can antagonize each other, therefore shaping chromatin and controlling gene expression.

Manganese deposition in basal ganglia structures results from both portal-systemic shunting and liver dysfunction.

BACKGROUND & AIMS: Manganese (Mn) deposition could be responsible for the T(1)-weighted magnetic resonance signal hyperintensities observed in cirrhotic patients. These experiments were designed to assess the regional specificity of the Mn increases as well as their relationship to portal-systemic shunting or hepatobiliary dysfunction. METHODS: Mn concentrations were measured in (1) brain samples from basal ganglia structures (pallidum, putamen, caudate nucleus) and cerebral cortical structures (frontal, occipital cortex) obtained at autopsy from 12 cirrhotic patients who died in hepatic coma and from 12 matched controls; and from (2) brain samples (caudate/putamen, globus pallidus, frontal cortex) from groups (n = 8) of rats either with end-to-side portacaval anastomosis, with biliary cirrhosis, or with fulminant hepatic failure as well as from sham-operated and normal rats. RESULTS: Mn content was significantly increased in frontal cortex (by 38\%), occipital cortex (by 55\%), pallidum (by 186\%), putamen (by 66\%), and caudate (by 54\%) of cirrhotic patients compared with controls. Brain Mn content did not correlate with patient age, etiology of cirrhosis, or history of chronic hepatic encephalopathy. In cirrhotic and portacaval-shunted rats, Mn content was increased in pallidum (by 27\% and 57\%, respectively) and in caudate/putamen (by 57\% and 67\%, respectively) compared with control groups. Mn concentration in pallidum was significantly higher in portacaval-shunted rats than in cirrhotic rats. No significant changes in brain Mn concentrations were observed in rats with acute liver failure. CONCLUSIONS: These findings suggest that brain Mn deposition results both from portal-systemic shunting and from liver dysfunction.

Space and time characterization of laser-induced plasmas for applications in chemical analysis and thin film deposition

Après des décennies de développement, l'ablation laser est devenue une technique importante pour un grand nombre d'applications telles que le dépôt de couches minces, la synthèse de nanoparticules, le micro-usinage, l’analyse chimique, etc. Des études expérimentales ainsi que théoriques ont été menées pour comprendre les mécanismes physiques fondamentaux mis en jeu pendant l'ablation et pour déterminer l’effet de la longueur d'onde, de la durée d'impulsion, de la nature de gaz ambiant et du matériau de la cible. La présente thèse décrit et examine l'importance relative des mécanismes physiques qui influencent les caractéristiques des plasmas d’aluminium induits par laser. Le cadre général de cette recherche forme une étude approfondie de l'interaction entre la dynamique de la plume-plasma et l’atmosphère gazeuse dans laquelle elle se développe. Ceci a été réalisé par imagerie résolue temporellement et spatialement de la plume du plasma en termes d'intensité spectrale, de densité électronique et de température d'excitation dans différentes atmosphères de gaz inertes tel que l’Ar et l’He et réactifs tel que le N2 et ce à des pressions s’étendant de 10‾7 Torr (vide) jusqu’à 760 Torr (pression atmosphérique). Nos résultats montrent que l'intensité d'émission de plasma dépend généralement de la nature de gaz et qu’elle est fortement affectée par sa pression. En outre, pour un délai temporel donné par rapport à l'impulsion laser, la densité électronique ainsi que la température augmentent avec la pression de gaz, ce qui peut être attribué au confinement inertiel du plasma. De plus, on observe que la densité électronique est maximale à proximité de la surface de la cible où le laser est focalisé et qu’elle diminue en s’éloignant (axialement et radialement) de cette position. Malgré la variation axiale importante de la température le long du plasma, on trouve que sa variation radiale est négligeable. La densité électronique et la température ont été trouvées maximales lorsque le gaz est de l’argon et minimales pour l’hélium, tandis que les valeurs sont intermédiaires dans le cas de l’azote. Ceci tient surtout aux propriétés physiques et chimiques du gaz telles que la masse des espèces, leur énergie d'excitation et d'ionisation, la conductivité thermique et la réactivité chimique. L'expansion de la plume du plasma a été étudiée par imagerie résolue spatio-temporellement. Les résultats montrent que la nature de gaz n’affecte pas la dynamique de la plume pour des pressions inférieures à 20 Torr et pour un délai temporel inférieur à 200 ns. Cependant, pour des pressions supérieures à 20 Torr, l'effet de la nature du gaz devient important et la plume la plus courte est obtenue lorsque la masse des espèces du gaz est élevée et lorsque sa conductivité thermique est relativement faible. Ces résultats sont confirmés par la mesure de temps de vol de l’ion Al+ émettant à 281,6 nm. D’autre part, on trouve que la vitesse de propagation des ions d’aluminium est bien définie juste après l’ablation et près de la surface de la cible. Toutefois, pour un délai temporel important, les ions, en traversant la plume, se thermalisent grâce aux collisions avec les espèces du plasma et du gaz.

Developmental, morphological, and behavioural plasticity in the reproductive strategies of stink bugs and their egg parasitoids

L’environnement façonne la physiologie, la morphologie et le comportement des organismes par l’entremise de processus écologiques et évolutifs complexes et multidimensionnels. Le succès reproducteur des animaux est déterminé par la valeur adaptative d’un phénotype dans un environnement en modification constante selon une échelle temporelle d’une à plusieurs générations. De plus, les phénotypes sont façonnés par l’environnement, ce qui entraine des modifications adaptatives des stratégies de reproduction tout en imposant des contraintes. Dans cette thèse, considérant des punaises et leurs parasitoïdes comme organismes modèles, j’ai investigué comment plusieurs types de plasticité peuvent interagir pour influencer la valeur adaptative, et comment la plasticité des stratégies de reproduction répond à plusieurs composantes des changements environnementaux (qualité de l’hôte, radiation ultraviolette, température, invasion biologique). Premièrement, j’ai comparé la réponse comportementale et de traits d’histoire de vie à la variation de taille corporelle chez le parasitoïde Telenomus podisi Ashmead (Hymenoptera : Platygastridae), démontrant que les normes de réaction des comportements étaient plus souvent positives que celles des traits d’histoires de vie. Ensuite, j’ai démontré que la punaise prédatrice Podisus maculiventris Say (Hemiptera : Pentatomidae) peut contrôler la couleur de ses œufs, et que la pigmentation des œufs protège les embryons du rayonnement ultraviolet; une composante d’une stratégie complexe de ponte qui a évoluée en réponse à une multitude de facteurs environnementaux. Puis, j’ai testé comment le stress thermique affectait la dynamique de la mémoire du parasitoïde Trissolcus basalis (Wollaston) (Hymenoptera : Platygastridae) lors de l’apprentissage de la fiabilité des traces chimiques laissées par son hôte. Ces expériences ont révélé que des températures hautes et basses prévenaient l’oubli, affectant ainsi l’allocation du temps passé par les parasitoïdes dans des agrégats d’hôtes contenant des traces chimiques. J’ai aussi développé un cadre théorique général pour classifier les effets de la température sur l’ensemble des aspects comportementaux des ectothermes, distinguant les contraintes des adaptations. Finalement, j’ai testé l’habileté d’un parasitoïde indigène (T. podisi) à exploiter les œufs d’un nouveau ravageur invasif en agriculture, Halyomorpha halys Stål (Hemiptera : Pentatomidae). Les résultats ont montré que T. podisi attaque les œufs de H. halys, mais qu’il ne peut s’y développer, indiquant que le ravageur invasif s’avère un « piège évolutif » pour ce parasitoïde. Cela pourrait indirectement bénéficier aux espèces indigènes de punaises en agissant comme un puits écologique de ressources (œufs) et de temps pour le parasitoïde. Ces résultats ont des implications importantes sur la réponse des insectes, incluant ceux impliqués dans les programmes de lutte biologique, face aux changements environnementaux.

Characterisation of Transparent Conducting Thin Films Grown by Pulsed Laser Deposition and RF Magnetron Sputtering

Materials exhibiting transparency and electrical conductivity simultaneously, transparent conductors, Transparent conducting oxides (TCOs), which have high transparency through the visible spectrum and high electrical conductivity are already being used in numerous applications. Low-emission windows that allow visible light through while reflecting the infrared, this keeps the heat out in summer, or the heat in, in winter. A thin conducting layer on or in between the glass panes achieves this. Low-emission windows use mostly F-doped SnO2. Most of these TCO’s are n type semiconductors and are utilized in a variety of commercial applications, such as flat-panel displays, photovoltaic devices, and electrochromic windows, in which they serve as transparent electrodes. Novel functions may be integrated into the materials since oxides have a variety of elements and crystal structures, providing great potential for realizing a diverse range of active functions. However, the application of TCOs has been restricted to transparent electrodes, notwithstanding the fact that TCOs are n-type semiconductors. The primary reason is the lack of p-type TCOs, because many of the active functions in semiconductors originate from the nature of the pn-junction. In 1997, H. Kawazoe et al.[2] reported CuAlO2 thin films as a first p-type TCO along with a chemical design concept for the exploration of other p-type TCOs.

Electrical Characteristics of n-ZnO/p-Si Heterojunction Diodes Grown by Pulsed Laser Deposition at Different Oxygen Pressures

Heterojunction diodes of n-type ZnO/p-type silicon (100) were fabricated by 12 pulsed laser deposition of ZnO films on p-Si substrates in oxygen ambient at 13 different pressures. These heterojunctions were found to be rectifying with a 14 maximum forward-to-reverse current ratio of about 1,000 in the applied 15 voltage range of -5 V to +5 V. The turn-on voltage of the heterojunctions was 16 found to depend on the ambient oxygen pressure during the growth of the ZnO 17 film. The current density–voltage characteristics and the variation of the 18 series resistance of the n-ZnO/p-Si heterojunctions were found to be in line 19 with the Anderson model and Burstein-Moss (BM) shift.

Electrical and Optical Properties of Znga2o4 Thin Films Deposited By Pulsed Laser Deposition

ZnGa2O4 spinel is a promising new UV transparent electronic conductor. Enhancing the electrical conductivity of this potential oxide phosphor can make it a promising transparent conducting oxide. In this paper, we have investigated the effects of processing and doping on the conductivity of semiconducting ZnGa2O4, particularly thin films. Crystalline zinc gallate thin films have been deposited on fused quartz substrates employing the pulsed laser deposition (PLD) technique at room temperature for an oxygen partial pressure of 0.1 Pa (0.001mbar). The films were found to be UV transparent, the band gap of which shifted to 4.75eV on hydrogen annealing. The band gap of the oxygen stoichiometric bulk powder samples (4.55eV) determined from diffuse reflection spectrum (DRS) shifted to 4.81eV on reduction in a hydrogen atmosphere. The electrical conductivity improved when Sn was incorporated into the ZnGa2O4 spinel. The conductivity of ZnGa2O4:Sn thin films was further improved on reduction.