Comparison of terrain following and cut cell grids using a non-hydrostatic model

Terrain following coordinates are widely used in operational models but the cut cell method has been proposed as an alternative that can more accurately represent atmospheric dynamics over steep orography. Because the type of grid is usually chosen during model implementation, it becomes necessary to use different models to compare the accuracy of different grids. In contrast, here a C-grid finite volume model enables a like-for-like comparison of terrain following and cut cell grids. A series of standard two-dimensional tests using idealised terrain are performed: tracer advection in a prescribed horizontal velocity field, a test starting from resting initial conditions, and orographically induced gravity waves described by nonhydrostatic dynamics. In addition, three new tests are formulated: a more challenging resting atmosphere case, and two new advection tests having a velocity field that is everywhere tangential to the terrain following coordinate surfaces. These new tests present a challenge on cut cell grids. The results of the advection tests demonstrate that accuracy depends primarily upon alignment of the flow with the grid rather than grid orthogonality. A resting atmosphere is well-maintained on all grids. In the gravity waves test, results on all grids are in good agreement with existing results from the literature, although terrain following velocity fields lead to errors on cut cell grids. Due to semi-implicit timestepping and an upwind-biased, explicit advection scheme, there are no timestep restrictions associated with small cut cells. We do not find the significant advantages of cut cells or smoothed coordinates that other authors find.

An asymmetric sandpile model with height restriction

We analyze by numerical simulations and mean-field approximations an asymmetric version of the stochastic sandpile model with height restriction in one dimension. Each site can have at most two particles. Single particles are inactive and do not move. Two particles occupying the same site are active and may hop to neighboring sites following an asymmetric rule. Jumps to the right or to the left occur with distinct probabilities. In the active state, there will be a net current of particles to the right or to the left. We have found that the critical behavior related to the transition from the active to the absorbing state is distinct from the symmetrical case, making the asymmetry a relevant field.

Application of abrupt cut-off models in the analysis of the capacitance spectra of conjugated polymer devices

In this paper, a detailed study of the capacitance spectra obtained from Au/doped-polyaniline/Al structures in the frequency domain (0.05 Hz-10 MHz), and at different temperatures (150-340 K) is carried out. The capacitance spectra behavior in semiconductors can be appropriately described by using abrupt cut-off models, since they assume that the electronic gap states that can follow the ac modulation have response times varying rapidly with a certain abscissa, which is dependent on both temperature and frequency. Two models based on the abrupt cut-off concept, formerly developed to describe inorganic semiconductor devices, have been used to analyze the capacitance spectra of devices based on doped polyaniline (PANI), which is a well-known polymeric semiconductor with innumerous potential technological applications. The application of these models allowed the determination of significant parameters, such as Debye length (approximate to 20 nm), position of bulk Fermi level (approximate to 320 meV) and associated density of states (approximate to 2x10(18) eV(-1) cm(-3)), width of the space charge region (approximate to 70 nm), built-in potential (approximate to 780 meV), and the gap states` distribution.

Teknik kontra användbarhet - vad påverkar utvecklingen? : En jämförelse av programmen Avid Media Composer 5.5 och Final Cut Pro X

Denna uppsats är en undersökning och en jämförelse av redigeringsprogrammen Avid Media Composer och Final Cut Pro X. Utgångspunkten i analysen är användbarhet och användaren. Saker som tas upp och diskuteras är teknikutvecklingen och konkurrensen mellan redigeringsprogrammen. Den historiska aspekten presenteras och förklaras för att lägga en grund till hur det ser ut i dagsläget. Några av de sakerna som jag kommer fram till är att teknikutvecklingen ofta sker på användbarhetens bekostnad och att användaren ofta måste anpassa sig efter tekniken. Konkurrensen mellan programmen påverkas av den växande marknaden för hobbyredigering och det leder till annorlunda utveckling.

Kraftutveckling för manuella trädfällningsredskap : Force development for manual tree felling tools

The objective with this study has been to build general models of the mechanics in tree felling with chain-saw and to compare felling torque for different tools. The theoretical models are completed and validated with a comparative study. The study includes a great number of felling tools of which some are used with different methods. Felling torque was measured using a naturally like measuring arrangement where a tree is cut at about 3.7 m height and then anchored with a dynamometer to a tree opposite to the felling direction. Notch and felling cut was made as ordinary with exception that the hinge was made extra thin to reduce bending resistance. The tree was consequently not felled during the trials and several combinations of felling tools and individuals could be used on the same tree.The results show big differences between tools, methods and persons. The differences were, however, not general, but could vary depending on conditions (first of all tree diameters). Tools and methods that push or pull on the stem are little affected by the size of the tree, while tools that press on the stump are very much dependent of a large stump-diameter. Hand force asserted on a simple pole is consequently a powerful tool on small trees. For trees of medium size there are several alternative methods with different sizes and brands of felling levers and wedges. Larger and more ungainly tools and methods like tree pusher, winch, etc. develop very high felling torque on all tree sizes. On large trees also the felling wedge and especially the use of several wedges together develop very high felling torque.

Defining the role of common variation in the genomic and biological architecture of adult human height

Using genome-wide data from 253,288 individuals, we identified 697 variants at genome-wide significance that together explained one-fifth of the heritability for adult height. By testing different numbers of variants in independent studies, we show that the most strongly associated ∼2,000, ∼3,700 and ∼9,500 SNPs explained ∼21%, ∼24% and ∼29% of phenotypic variance. Furthermore, all common variants together captured 60% of heritability. The 697 variants clustered in 423 loci were enriched for genes, pathways and tissue types known to be involved in growth and together implicated genes and pathways not highlighted in earlier efforts, such as signaling by fibroblast growth factors, WNT/β-catenin and chondroitin sulfate-related genes. We identified several genes and pathways not previously connected with human skeletal growth, including mTOR, osteoglycin and binding of hyaluronic acid. Our results indicate a genetic architecture for human height that is characterized by a very large but finite number (thousands) of causal variants.2014

Formas de atuação de entidades sindicais do RGS : estudo comparativo entre sindicatos vinculados à CUT e a Força Sindical

O presente trabalho tem como objetivos identificar a percepção dos líderes sindicais frente às mudanças que estão sendo propostas na estrutura sindical brasileira e na flexibilização de direitos sociais e compreender o funcionamento das entidades pesquisadas, apresentando suas principais bandeiras de luta e a forma como atuam para alcançá-las. A revisão da literatura estrutura-se em torno das implicações da globalização econômica sobre o processo produtivo e as relações de trabalho, a evolução histórica dos sindicatos brasileiros, as caraterísticas do atual modelo sindical brasileiro e as transformações que estão sendo propostas para mudança desse modelo. A metodologia adotada é a do estudo exploratório descritivo combinado, dividido em duas fases – uma fase qualitativa e outra quantitativa. A análise dos dados identifica a posição das lideranças de dois grupos de sindicatos, um vinculado à Central Única dos Trabalhadores - CUT e outro associado à Força Sindical. A análise é complementada com os dados obtidos nas entrevistas realizadas com uma liderança de cada uma das centrais citadas. A partir dos dados apontados na pesquisa, tecem-se os comentários finais.

A indústria de produção e comercialização de papel cut to size no Brasil : estudo de caso : estudo de caso sobre o grau de aplicabilidade das técnicas de resposta eficiente ao consumidor (ecr) na cadeia de distribuição de uma indústria de produção de papel cut to size no Brasil

Esta dissertação estuda, por meio do uso da ferramenta Globalscorecard, a relação entre o movimento resposta eficiente ao consumidor (ECR) e a indústria brasileira de papéis cut to size, tendo como base o caso da cadeia de distribuição composta por uma indústria e dois distribuidores de papéis cut to size no Brasil. O caso está estruturado com base em dados e informações coletadas em pesquisas, artigos, publicações e nas empresas, objeto do estudo. A metodologia utilizada é a análise de casos. Também está analisada, à luz do ECR, a questão da colaboração e da eficiência na cadeia de distribuição. Ao final, são feitos comentários e considerações acerca dos resultados obtidos, recomendações para as empresas envolvidas e sugestões para futuros estudos acadêmicos nessa área.

Performance and ruminal morphologic characteristics of Saanen kids fed ground, pelleted or extruded total ration

The aim of the present study was to determine feed intake and average weight gain and to evaluate the ruminal morphologic characteristics of Saanen kids slaughtered at 30, 45 and 60 days of age, according to a completely randomized design. Thirty-six non-castrated male Saanen kids were fed ground total ration, pelleted total ration, or extruded total ration. Feed intake and refusals were controlled daily and the animals were weighed at birth and then once a week. Newborn kids received a milk replacer and were weaned at 45 days. Immediately after slaughter, the animals were eviscerated, the entire digestive apparatus was removed from the carcass. The reticulo-rumen was separated, emptied, washed and weighed. Samples were collected from the dorsal sac, pillar area and ventral sac of the rumen, fixed for about 24h in Bouin's solution, dehydrated, embedded in Histosec and cut into 5 mu m sections. Results showed that dry matter intake (DMI) at weaning and post-weaning and weight gain were higher (P < 0.05) in animals that received the pelleted total ration. The weight of the reticulo-rumen accompanied body development and was heavier in these animals. Histologically, after weaning ruminal papillae were more developed in animals that received pelleted total ration. Length of papillae increased with increase of age. The ratio of papillary height to papillary width increased with age in the ventral sac and until weaning (P > 0.05). We conclude that the pelleting process of the total ration favored increased intake, with a 46.7% increase in weight gain and increase in rumen weight and papillae length, suggesting that best results are obtained with this processing. In general, no difference was observed between the results obtained with extruded and ground total ration, although animals fed extruded total ration showed an increase in rumen weight and papillae width. (c) 2004 Elsevier B.V All rights reserved.

Enxertia em citros por substituição de ápice caulinar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Vertical growth of mini watermelon according to the training height and plant density

A melancia é uma espécie tradicionalmente conduzida em campo no sistema rasteiro. As cultivares de frutos pequenos (1 a 3 kg), que adquirem melhores preços de mercado, vêm sendo cultivadas também em ambiente protegido, onde são conduzidas no sistema vertical, com poda de ramos e raleio de frutos. Essas práticas possibilitam aumentar o adensamento das plantas, a qualidade e a produtividade de frutos em comparação ao sistema rasteiro. Objetivou-se com este trabalho avaliar a influência de três alturas de condução (1,7; 2,2 e 2,7 m) e duas densidades de plantas (3,17 e 4,76 plantas m-2) sobre as características produtivas e qualitativas da mini melancia Smile cultivada em ambiente protegido. A poda da haste principal foi realizada aos 43, 55 e 66 dias após o transplante (DAT) para as alturas de condução de 1,7; 2,2 e 2,7 m, respectivamente. A massa seca dos ramos, dos pecíolos, das folhas e total foram afetados pela altura de condução, cujos maiores valores foram obtidos para as plantas conduzidas a 2,2 e 2,7 m de altura. A área foliar, a área foliar específica e o índice de área foliar não foram influenciados pela altura de condução das plantas. A altura de condução de 2,7 m elevou a produtividade total. Entretanto, a produtividade comercial, a massa média dos frutos e todas as características qualitativas não foram significativamente diferentes das obtidos pela altura de poda de 2,2 m. em relação à densidade de plantas, a melhor opção foi a de 4,76 plantas m-2, pois elevou a produtividade comercial em 37,4% sem reduzir a massa média dos frutos.

Multivariate analysis of fresh-cut carambola slices stored under different temperatures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biópsia hepática com agulha tru-cut guiada por videolaparoscopia em caprinos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)